I'm trying to install Apache2::Request module (from CPAN.org) and in shell there is such messages: I'm using openSUSE 11.1, Perl 5.8
[Code]...
I'm using openSUSE 11.1, KDE I'm trying to install the module Apache2::Request to my OS. After the gzip -dc libapreq2-2.12.tar.gz | tar -xof - I typed in Shell these (as shown in INSTALLATION document of module): perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs Then something goes wrong, make doesn't work saying: make: *** No targets specified and no makefile found. Stop..
I think the problem is in the command perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs in section .../path/to/apache2/bin/apxs . What does mean ./path/to/apache2/bin/apxs? Maybe I should write the path to apache2 which contains a file named apxs? I did not find such file apxs. My apache2 path is /etc/apache2, but there is no file named apxs... Result for perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs:
[Code]....
i have installed mouse trap by the Ubuntu "easy peasy" software center ,but for some reason it didn't work so i uninstalled it and start to install the mouse trap from herehttp://live.gnome.org/MouseTrap/Installationbut when did the "make" step it gave me that error:make: *** No targets specified and no makefile found. Stop.so how i fix thatand another problem that i have is when i go to a live radio on the net to listen it dose not work how do i change it to work like i changed to the "vlc player" to be the first program that opens
View 2 Replies View RelatedI recently switched over to Fedora 13 but I'm having a bit of trouble. I've tried writing simple programs in Emacs and Eclipse but neither will compile. It always gives the error, "make: *** No targets specified and no makefile found. Stop."
I've looked around at a couple of forums, but people with the same issue can't install software, but I can. I got Fedora from the Fedora website so I know its complete, but I have the sneaking suspicion that I'm just missing a file or something.
I am using Kubuntu 11.04 on ASUS K52Jc and when I start compiling this happens: (yes,yes I do ./configure; after that) q12345@Laptop $ make make: *** No targets specified and no makefile found. Stop. and what is so weird? Well, I can't do it on any other system that I tried (openSuSE, all Ubuntus, Debian...).
View 2 Replies View RelatedI seem to be running into this issue a lot when installing various programs. I downloaded and installed a tar file (Linux Wacom Project. xf86-input-wacom-0.32.0 specifically) for my Bamboo tablet. Here's what I did:
Code: Select allsudo apt-get install build-essential
Looks like everything went well, but it asked me for a CD?... I just ignored that and went to the next step in the guide.
Code: Select allsudo apt-get build-dep wacom-tools
Looks like everything went well here. But near the end I get this...
Code: Select allchecking for doxygen... no
configure: WARNING: doxygen not found - documentation targets will be skipped
checking for rint in -lm... yes
checking for XORG... no
configure: error: in `/home/mason/Desktop/xf86-input-wacom-0.32.0':
configure: error: The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config.
Alternatively, you may set the environment variables XORG_CFLAGS and XORG_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.
I didn't really pay attention to THAT until I do...
Code: Select allcd ~/Desktop/linuxwacom-0.8.8-6
./configure --prefix=/usr
make
Where in I get this error message after I enter in Code: Select allmake at the terminal
Code: Select allmake: *** No targets specified and no makefile found. Stop.
I download a package of tar.gz ...
1:firstly I extract it on desktop
2:Then use cd command and go to extracted folder
3:To install that package i use
sudo make install. Then I got a error message
"make: *** No targets specified and no makefile found. Stop."
im trying to install Squid clamav with squid(fedora11, 386MB, 2.6kernel)..i configured clamd and is working fine,(squid wrking fine) then i tried to install squidclamav via (yum -y install curl-devel).then i downloaded squidclamav-4.0.tar.gz and extracted.. then i run ./configure and then make.but make install command wont work; it shows an error.
View 4 Replies View RelatedI needed an open source alternative to after effects so i went for jahshaka but after following the instructions, i type in 'make' and hit return and it says "make: *** No targets specified and no makefile found. Stop." am i missing something obvious? i have looked around the web, but no-one has this problem that i can find i am using ubuntu 10.04.
View 2 Replies View Relatedwhile booting with bootsplash turned off there's a message "FATAL: Module ata_piix not found FATAL: Error running install command for ata_piix" .Though everything works fine i'd like to know what does this message mean and is there a way to disable loading of ata_piix whatever it means.
View 2 Replies View RelatedI just installed apache2 server on my ubuntu 10.04. It works fine (i get the "that works" page when i access to http://localost/ and get no errors or warnings when i start apache.However, the localhost/~florian returns a 404 not found.I've enabled the userdir module
Code:
a2enmod userdir
and restarted the apache server
[code]....
not entirely sure if this is a hardware or a kernel/distro issue but here goes: when trying to install the driver for an Intel e100 (82557) NIC (on an IBM Thinkpad A20m) I get the following from both <make> and <make install>....
make -C /lib/modules/2.6.30.9/build SUBDIRS=/root/e100-3.5.17/src modules
make[1]: Entering directory /usr/src/linux-source-2.6.30.9
WARNING: Symbol version dump /usr/src/linux-source-2.6.30.9/Module.symvers is missing: modules will have no dependencies and modversions.scripts/Makefile.build:49 *** CFLAGS was changed in "/root/e100-3.5.17/src/Makefile". Fix it to use EXTRA CFLAGS. Stop.
[Code]...
I am using openSuSE 11.2 on a VGN-AR41L. I have also erased the preinstalled Home Vista (what a pleasure). Now to my problem. My system boots correctly but if I press the <ESC> key while booting I can see the following messages:
"Doing fast boot
FATAL: mbcache module not found
FATAL: ahci module not found
"
and the boot process continues normally.
Why this happens? Does this mean that I have a problem that I haven't discovered yet? Is it something that I can ignore? I am using SUSE Linux from version SUSE Linux 8 personal and although I am not a power user I have done my two desertions on this system and I am very happy with SUSE. I have bought SUSE Linux 8 Personal and SUSE Linux 10 all the other versions until today have been downloaded.
vmtoolsd FATAL: Module vmmemctl not found.
What does this mean and should I activate/deactivate anything in the system or is this no problem.
I can not install files RPM, says there is error in the request.
View 1 Replies View RelatedI've updated my openSUSE 11.1 to 11.2 using installation DVD. After that, as system boots, I started to get lines like:
Code: FATAL: Module jbd not found
FATAL: Module mbcache not found
FATAL: Module ext3 not found and so on with different modules.. and this exact string several times:
Code: WARNING: All config file need .conf: /etc/modprobe.d/tv, it will be ignored in a future release. Finally I get:
[Code]....
I have installed suse 11.2. Sometimes while using (firefox, okular, open office etc) x server restarts & comes to login screen. While checking Xorg.0.log i found i810 module is failed to load. Is this causing the x server restart?
View 9 Replies View RelatedI am in the process of writing a web-application using apache,mod-python and cheetah. I installed apache2, mod-python and cheetah and also enabled the userdir module in apache2 so that i can host the webpages inside my public_html folder.
The public_html folder has a folder named 'site' which gets displayed when I type "url" in the browser. There are subfolders inside this 'site' folder and the site folder also has an index.html page inside it.
But when I click on the site folder in the browser, I get a 'Requested url /~myusername/site/ not found'. There are files inside the folder with 777 permissions and still I get this error.
I use Ubuntu Jaunty with the following configuration - 'Apache/2.2.11 (Ubuntu) PHP/5.2.6-3ubuntu4.1 with Suhosin-Patch mod_python/3.3.1 Python/2.6.2 Server at localhost Port 80'.
These are the lines I have added to the /etc/apache2/sites-available/default file
Code:
<Directory "/home/myusername/public_html/site/">
SetHandler mod_python
PythonHandler mod_python.publisher
PythonDebug On
PythonAutoReload On
After installing ncl 2 sp2, I restarted my computer. Now when I try to login I am getting the following error:Module is unknown. I am running openSuse 11.2 64-bit.
View 2 Replies View Relatedi m trying to install glib on my pc but i was always encounter a probelem in make. it says "No Target Specified No Makefile Found Stop"
[code]...
I have suse10 64bit and I was setting up SVN server on it. After all required setup while reloading apache2,its giving the error:
Code:
httpd2-prefork: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 31 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib64/apache2/mod_dav_svn.so into server: /usr/lib64/libsvn_subr-1.so.0: undefined symbol: apr_memcache_add_server
I installed ndiswrapper and tried adding a driver. Error: module ndiswrapper not found.So I recompiled my kernel, upgrading to 2.6.33.4 (no, I can't see the logical connection either) After a week, I got the new kernel working ( in the interim I reinstalled debian- it didn't survive my first kernel attempt. don't ask), and reinstalled ndiswrapper. Same problem. So I had a stoke of genius: download the source package!! So I did. Lo and behold, a new directory appeared in /usr/src/ : modules. I took a moment to admire my work, then I jumped in.I 'ls'ed to see what was going on, and found a Makefile. so I typed 'make'. First error: kernel source not found. So I entered the Makefile, found the(clearly marked)variable,and changed it to /usr/src/linux-2.6.33.4 , exited, and redid 'make' Second error: no wireless support in kernel. So I went to src/linux-2.6.33.4 and did a make menuconfig- loaded my current, threw in wireless, and exited.
[Code]...
I have a problem with loading the powersaving kernel module p4-clockmod.ko. When I try inserting the module (via modprobe or insmod) I get FATAL: Error inserting p4_clockmod (/lib/modules/2.6.31.8-mediaserver/extra/p4-clockmod.ko): Invalid module format The module has been compiled together with the kernel. Other modules load with no problem at all. I've tried recompiling the kernel (after re-installing the sources, make xconfig from scratch) - no avail. There's only one kernel source package installed. Searching the forum and google didn't yield a helping answer.
View 9 Replies View RelatedOur Sled 10.1 server is running as a VM on VSpher 4. After a power outage we can not log into the server we get the Error in Module message. I can however disable the nic card for the server in the vm console and the system logs in with no problem.
View 2 Replies View RelatedI want to load the package madwifi under opensuse from Index of /suse/11.1, but RealPlayer did not function correctly. The reason why I want to use madwifi is that I cannot start my internet with opensuse 11.1 using motherboard from asus with the ethernet adapter from Atheros AR 8121/AR8113 PCI-E Version 1.0.0.5. When I compile the delivered Linux drivers I got the failure message "Makefile:61: Linux kernel source not found". So I decided to take rpm from opensuse within madwifi. How/Where can I get the corrosponding madwifi elsewhere?
View 4 Replies View RelatedI would like to test 12.1 M5 on my real hardware, so I have special for this purpose two additional partitions (sda2 (to install milestone) and sda3 (to store installation ISO files)). I am running my stable 11.4 with Grub on sda1.
I do not like to burn DVDs just for short test of one milestone, so I was used to download DVD ISO, to unpack it to sda3 partition with all its files, then I changed Grub to boot install Linux from sda3. Installation complains there is no DVD or CD, then I chose to force installation from hard disk and select sda3 partition and select root directory "/". As I was used to from 11.4 this will start installation as it would be started from DVD.
But I think the problem has appeared since 12.1, where I get message: No repository found. (on sda3 / ), so the installation does not start.
I know this is not official way to install openSuse, but it worked before, and it was fast and easy for me, to install from hard disk.
After a disk crash I reinstalled openSuSE 11.2 and as always downloaded the latest Nvidia driver for my geforce 8200 graphics.
Unlike all previous cases, this time the driver does not install. The contents of /var/log/nvidia-installer.log are below. The error refers to being unable to to locate version.h
PATH:
Using: nvidia-installer ncurses user interface
ERROR:
I am new to Linux and I am trying to install a C program from source using Makefile. So I 've created a "hello world" program and then a Makefile to install it. Then I logged in as root and used
make install
The following error occurs:
make: execvp: /usr/bin: Permission denied
make: *** [install] Error 127
Here is the Makefile:
CC=gcc
CFLAGS=-c -Wall
PROGS = hello
INSTDIR = $(prefix)/usr/bin/
INSTMODE = 0755
INSTOWNER = root
INSTGROUP = root
all: $(PROGS)
$(PROGS): main.o
$(CC) main.o
main.o: main.c
$(CC) $(CFLAGS) main.c
install:$(PROGS)
$(INSTALL) $(INSTDIR)
$(INSTALL) $(INSTMODE) $(INSTOWNER) -o $(INSTGROUP) $(PROGS) $(INSTDIR)
clean:
rm -rf $(PROGS) *o $(PROGS)
So, where are the errors
I have probably a stupid question. How do I add an include path for kernel module makefile? I want to include "test_kernel.h" in test_module.c
test_kernel.h resides in a different directory with relative path "../../common/" . I can include the file specifying the relative path, which works OK:
#include "../../common/test_kernel.h"
I would like include it without the relative path and specify path in Makefile similar to -I option available in application makefiles. I have tried EXTRA_CFLAGS += -I../../common/ in the makefile but no use.
I am trying to install from the iso image that a burned to cd, but while loading it comes up with an error. Eventually it says no repository found. I am not sure why this is happening.
View 5 Replies View Related
