Fedora :: Emacs - Error "make: *** No Targets Specified And No Makefile Found. Stop"
Aug 5, 2010
I recently switched over to Fedora 13 but I'm having a bit of trouble. I've tried writing simple programs in Emacs and Eclipse but neither will compile. It always gives the error, "make: *** No targets specified and no makefile found. Stop."
I've looked around at a couple of forums, but people with the same issue can't install software, but I can. I got Fedora from the Fedora website so I know its complete, but I have the sneaking suspicion that I'm just missing a file or something.
View 2 Replies
ADVERTISEMENT
Dec 5, 2010
I needed an open source alternative to after effects so i went for jahshaka but after following the instructions, i type in 'make' and hit return and it says "make: *** No targets specified and no makefile found. Stop." am i missing something obvious? i have looked around the web, but no-one has this problem that i can find i am using ubuntu 10.04.
View 2 Replies
View Related
Dec 17, 2010
i have installed mouse trap by the Ubuntu "easy peasy" software center ,but for some reason it didn't work so i uninstalled it and start to install the mouse trap from herehttp://live.gnome.org/MouseTrap/Installationbut when did the "make" step it gave me that error:make: *** No targets specified and no makefile found. Stop.so how i fix thatand another problem that i have is when i go to a live radio on the net to listen it dose not work how do i change it to work like i changed to the "vlc player" to be the first program that opens
View 2 Replies
View Related
Jun 16, 2011
I am using Kubuntu 11.04 on ASUS K52Jc and when I start compiling this happens: (yes,yes I do ./configure; after that) q12345@Laptop $ make make: *** No targets specified and no makefile found. Stop. and what is so weird? Well, I can't do it on any other system that I tried (openSuSE, all Ubuntus, Debian...).
View 2 Replies
View Related
Jun 19, 2010
I'm using openSUSE 11.1, KDE I'm trying to install the module Apache2::Request to my OS. After the gzip -dc libapreq2-2.12.tar.gz | tar -xof - I typed in Shell these (as shown in INSTALLATION document of module): perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs Then something goes wrong, make doesn't work saying: make: *** No targets specified and no makefile found. Stop..
I think the problem is in the command perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs in section .../path/to/apache2/bin/apxs . What does mean ./path/to/apache2/bin/apxs? Maybe I should write the path to apache2 which contains a file named apxs? I did not find such file apxs. My apache2 path is /etc/apache2, but there is no file named apxs... Result for perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs:
[Code]....
View 3 Replies
View Related
Aug 4, 2011
im trying to install Squid clamav with squid(fedora11, 386MB, 2.6kernel)..i configured clamd and is working fine,(squid wrking fine) then i tried to install squidclamav via (yum -y install curl-devel).then i downloaded squidclamav-4.0.tar.gz and extracted.. then i run ./configure and then make.but make install command wont work; it shows an error.
View 4 Replies
View Related
Jun 14, 2010
I'm trying to install Apache2::Request module (from CPAN.org) and in shell there is such messages: I'm using openSUSE 11.1, Perl 5.8
[Code]...
View 2 Replies
View Related
Feb 21, 2016
I seem to be running into this issue a lot when installing various programs. I downloaded and installed a tar file (Linux Wacom Project. xf86-input-wacom-0.32.0 specifically) for my Bamboo tablet. Here's what I did:
Code: Select allsudo apt-get install build-essential
Looks like everything went well, but it asked me for a CD?... I just ignored that and went to the next step in the guide.
Code: Select allsudo apt-get build-dep wacom-tools
Looks like everything went well here. But near the end I get this...
Code: Select allchecking for doxygen... no
configure: WARNING: doxygen not found - documentation targets will be skipped
checking for rint in -lm... yes
checking for XORG... no
configure: error: in `/home/mason/Desktop/xf86-input-wacom-0.32.0':
configure: error: The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config.
Alternatively, you may set the environment variables XORG_CFLAGS and XORG_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.
I didn't really pay attention to THAT until I do...
Code: Select allcd ~/Desktop/linuxwacom-0.8.8-6
./configure --prefix=/usr
make
Where in I get this error message after I enter in Code: Select allmake at the terminal
Code: Select allmake: *** No targets specified and no makefile found. Stop.
View 11 Replies
View Related
May 1, 2010
I download a package of tar.gz ...
1:firstly I extract it on desktop
2:Then use cd command and go to extracted folder
3:To install that package i use
sudo make install. Then I got a error message
"make: *** No targets specified and no makefile found. Stop."
View 4 Replies
View Related
May 7, 2011
i m trying to install glib on my pc but i was always encounter a probelem in make. it says "No Target Specified No Makefile Found Stop"
[code]...
View 14 Replies
View Related
Aug 29, 2011
I am using a Linux machine with a KVM switch at work, and I commonly use emacs while switching between that machine and my other machine. I typically use the keyboard shortcut to swap between machines on the KVM, which is the key sequence: Scroll Lock, Scroll Lock, Up or Down. If I have an emacs window on top on Linux and hit these buttons, it will trap the Scroll Lock key presses and trigger a system beep from the CPU speaker. The KVM still switches, but on occasion, after the switch, it will register Scroll Lock as being stuck pressed, and so I'll be treated to an earful of system beeping. I have to switch back to the computer to get it to stop.Is there something I can put in the .emacs file that will prevent the program from beeping when I hit Scroll Lock with the window on top?
View 1 Replies
View Related
Sep 15, 2010
I want to gave much details as possible. working directory (~/a1/shell) in the shell directory i have Makefile. also in the shell directory i have subdirectory's (obj, src, include)
My current Makefile
Quote:
#What needs to be built to make all files and dependencies
clean:
# End of Makefile
I wanted it so: all .o files are created in the obj subdirectory, and my application, sshell, is created in the shell directory.
I am getting this error when i run the make run: No rule to make target 'shell.h', needed by 'shutil.o'. stop
View 1 Replies
View Related
Jun 3, 2011
I am new to Linux and I am trying to install a C program from source using Makefile. So I 've created a "hello world" program and then a Makefile to install it. Then I logged in as root and used
make install
The following error occurs:
make: execvp: /usr/bin: Permission denied
make: *** [install] Error 127
Here is the Makefile:
CC=gcc
CFLAGS=-c -Wall
PROGS = hello
INSTDIR = $(prefix)/usr/bin/
INSTMODE = 0755
INSTOWNER = root
INSTGROUP = root
all: $(PROGS)
$(PROGS): main.o
$(CC) main.o
main.o: main.c
$(CC) $(CFLAGS) main.c
install:$(PROGS)
$(INSTALL) $(INSTDIR)
$(INSTALL) $(INSTMODE) $(INSTOWNER) -o $(INSTGROUP) $(PROGS) $(INSTDIR)
clean:
rm -rf $(PROGS) *o $(PROGS)
So, where are the errors
View 3 Replies
View Related
Mar 30, 2010
Code:
anisha@linux-p0mg:~> uname -r && cat /etc/*release
2.6.25.5-1.1-pae
openSUSE 11.0 (i586)
VERSION = 11.0
My small Makefile:
Code:
obj-m += serialPortISR.o
all:
make -C /lib/modules/$(shell uname -r)/build M=$(PWD) modules
clean:
make -C /lib/modules/$(shell uname -r)/build M=$(PWD) clean
Errors I receive:
Code:
anisha@linux-p0mg:~/Desktop/serialPortISR_31_10_09> make
make -C /lib/modules/2.6.25.5-1.1-pae/build M=/home/anisha/Desktop/serialPortISR_31_10_09 modules
make[1]: Entering directory '/usr/src/linux-2.6.25.5-1.1-obj/i386/pae'
make[1]: *** No rule to make target `modules'. Stop.
make[1]: Leaving directory '/usr/src/linux-2.6.25.5-1.1-obj/i386/pae'
make: *** [all] Error 2
View 12 Replies
View Related
Jun 24, 2011
I am facing an error when I run the following command.
Command: autoreconf -i
Error: man/Makefile.am:11: `%'-style pattern rules are a GNU make extension
[code]....
I'm using Fedora Core 11 on Dell Machine Precision 360
View 3 Replies
View Related
Feb 6, 2010
I've been trying to install the latest version of Emacs from source but I'm running into a trouble. The commands "./configure" and "make" work just fine. However, when I run "sudo checkinstall" I get a message saying that makeinfo is missing:
Code: makeinfo is missing - cannot build manuals make: *** [info] Error 1 **** Installation failed. Aborting package creation. Cleaning up...OK Bye. What is Error 1
View 4 Replies
View Related
Dec 11, 2009
I'm just learning to use Eclipse (have previously been a vim+make developer). I created the standard Hello World project following the tutorial. The program compiles fine, but if I build it again without cleaning the project, make aborts with a glibc double free message (pasted below). The same thing happens if I run make in the Debug directory outside eclipse. I don't know make well enough to figure out what the problem is, and to my mind Eclipse shouldn't be generating a buggy makefile anyway.
I've attached a tarfile of the project directory. Download the file and the following sequence of commands should show you the problem:
tar xvzf HelloWorld.tar.gz && cd HelloWorld/Debug && make && make
Also, if you think it would be worthwhile submitting a bugreport to the Fedora Eclipse dev team, let me know where I can do that and I'll be happy to.
Error messages:
11:07:34 [michael@tablet Debug]$ make
*** glibc detected *** make: double free or corruption (fasttop): 0x0000000001fd5780 ***
= Backtrace: =
/lib64/libc.so.6[0x3b03e75a96]
make[0x411f46]
make[0x411fb2]
make[0x411feb]
make[0x40771e]
make[0x411177]
/lib64/libc.so.6(__libc_start_main+0xfd)[0x3b03e1ea2d]
make[0x402429]
= Memory map: =
00400000-00428000 r-xp 00000000 fd:04 1517952 /usr/bin/make
00628000-0062a000 rw-p 00028000 fd:04 1517952 /usr/bin/make
01fc0000-01fe1000 rw-p 00000000 00:00 0 [heap]
3b03a00000-3b03a1f000 r-xp 00000000 fd:00 81929 /lib64/ld-2.10.1.so
3b03c1e000-3b03c1f000 r--p 0001e000 fd:00 81929 /lib64/ld-2.10.1.so
3b03c1f000-3b03c20000 rw-p 0001f000 fd:00 81929 /lib64/ld-2.10.1.so
3b03e00000-3b03f64000 r-xp 00000000 fd:00 81933 /lib64/libc-2.10.1.so
3b03f64000-3b04164000 ---p 00164000 fd:00 81933 /lib64/libc-2.10.1.so
3b04164000-3b04168000 r--p 00164000 fd:00 81933 /lib64/libc-2.10.1.so
3b04168000-3b04169000 rw-p 00168000 fd:00 81933 /lib64/libc-2.10.1.so
3b04169000-3b0416e000 rw-p 00000000 00:00 0
3b08e00000-3b08e19000 r-xp 00000000 fd:00 81991 /lib64/libgcc_s-4.4.1-20090729.so.1
3b08e19000-3b09019000 ---p 00019000 fd:00 81991 /lib64/libgcc_s-4.4.1-20090729.so.1
3b09019000-3b0901a000 rw-p 00019000 fd:00 81991 /lib64/libgcc_s-4.4.1-20090729.so.1
7f6032b9d000-7f6037c70000 r--p 00000000 fd:04 1155417 /usr/lib32/locale/locale-archive
7f6037c70000-7f6037c74000 rw-p 00000000 00:00 0
7fffa6c19000-7fffa6c2e000 rw-p 00000000 00:00 0 [stack]
7fffa6c44000-7fffa6c45000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Aborted
View 1 Replies
View Related
Oct 26, 2009
when i install bochs and make the makefile why undefined reference to `pthread_create'
View 1 Replies
View Related
Jun 26, 2010
I am having an error during my Oracle 11g R2 installation on Fedora 13 that I couldn't get rid of or fix it, and I just continued the installation by clicking on the continue button to skip this error. The error message on the alert window is:
Error in invoking target 'agent nmhs' of makefile '/u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/ins_emagent.mk'. See '/u01/app/oraInventory/logs/installActions2010-06-24_03-22-15PM.log' for details.
and here is the contenets (error part) of the installActions2010-06-24_03-22-15PM.log file
INFO: /usr/bin/ld: /u01/app/oracle/product/carried(nmectlt.o): undefined reference to symbol 'B_DestroyKeyObject'
/usr/bin/ld: note: 'B_DestroyKeyObject' is defined in DSO /u01/app/oracle/product/11.2.0/dbhome_1/lib/libnnz11.so so try adding it to the linker command line
/u01/app/oracle/product/11.2.0/dbhome_1/lib/libnnz11.so: could not read symbols: Invalid operation
[code]....
View 2 Replies
View Related
Apr 13, 2011
I am relatively new to linux and am running into a problem. I just got a new laptop and need to configure/install it's wireless driver but am getting an error when running "make". The error is: make[1]: Entering directory `/lib/modules/2.6.37.1-1.2-desktop/build' make[1]: *** No rule to make target `modules'. Stop.
I have scoured these forums and know that others have the same issue (when configuring other drivers/programs). I am sorry if this post is redundant. It sounds like the Makefile is pointing to the wrong directory. I am using opensuse 11.4, have make and gcc installed. My kernel is linux-2.6.37.1-1.2 (I just re-installed the desktop kernel to make sure it was up to date). The driver I am trying to install is located here: AUR (en) - rtl8192ce.
Another forum suggests pointing somewhere in the /usr/src/linux-2.6.37.1-1.2 directory instead. Is this correct? Should I be pointing to a folder within this? I am not a programmer but any description about what I am actually putting in this directory and why would be awesome (so I can learn a bit more). Or just helping me solve the problem would be great too.
View 9 Replies
View Related
Feb 13, 2010
I have xubuntu 9.10 and I'm trying to install iw-0.9.19.When I use the command "make" I get this error:
/bin/sh: pkg-config: not found
/bin/sh: pkg-config: not found
Makefile:38: *** Cannot find development files for any supported version of libnl. Stop. I read the Readme file and it says: "To build IW, just enter make. If that fails, set the PKG_CONFIG_PATH environment variable to allow the Makefile to find libnl". I guess the problem is linking Makefile (in iw-0.9.19 directory) to libnl (version 1.1 correctly installed on xubuntu) via pkg_config_file.
View 6 Replies
View Related
Sep 19, 2010
I'm trying to load drivers from .tar.bz2 file. I got the .tar opened and extracted to directory ABC. When I try to CD to that directory, I get a message the directory does not exist even tho' I'm looking right at it and the ls command shows it. The full path is user/downloads.ABC.
When I try to run the next command $tar -xvzf DPB_RT2870_Linux_STA_x.x.x.x.tgz I get a message Ubuntu 10.04 cannot find -xvzf. When I try to run the Makefile command locate in the same ABC directory, I again the error message cannot find Makefile.
View 4 Replies
View Related
Mar 22, 2011
I downloaded mesa from their git repository a few days ago then built it and installed it. I've tried removing it just now with "make uninstall", but that feature isn't in the makefile. How I can remove it?
View 1 Replies
View Related
Feb 26, 2010
I am completely new to linux and am trying to run a Fortran program for class. I typed in "make C=R" and it ran through a long list of things and then came up with that error.
View 1 Replies
View Related
Oct 18, 2010
i am using scientific linux, fedora 12accidentaly i changed LD_LIBRARY_PATH of the root profile to a different location. so terminal cannot understand any command as i type. is there any other ways to access .bashrc file exept using editors emacs, vi, nedit. my own profile works fine but i dont have permission to access the root folder. only commands the terminal responds to are pwd, cd, echo. i dont have any clue how to restore the library because it locates here:
[root@localhost ~]# echo $PATH
/usr/local/src/root/bin:
[root@localhost ~]# nedit .bashrc
[code]....
View 4 Replies
View Related
Sep 20, 2009
I've been trying to figure out how to use make and makefile to compile and link some .cpp/.h. All i seem to find on google says to read the README for the software. But this is my own created c++ project. Im just looking for a simple makefile for my own .cpp/.h files( about 20 total).
I have tried using 2 different makefile "examples" as a template, but neither worked. I am getting error saying "file1.cpp: no newline character at end of file". or something to that degree.
View 5 Replies
View Related
Nov 17, 2009
Does anyone know if it is possible to make rules in a Makefile that would work like this:
> make debug module
or
> make module debug
where module can be any module that has a specific rule in the Makefile.
The thing I have is a Makefile with different rules that I compile like this:
> make module
What I would like is to add an option so I can compile whichever module with debug-information just by adding a debug to the make command. The debug-information I know how to do, the problem is how to make the Makefile work...
View 2 Replies
View Related
Mar 6, 2010
I have a number of projects, say test1, test2, test3,. I want to make and install all of them in exactly the same way; so I would like to say
make test2
make install test2
with the same Makefile.
In other words, I would like to pass the argument test2 (or just 2) to the Makefile, so this is taken as the target for make or make install. This must be a common wish; but I don't see any appropriate option with "man make" on my Fedora-12 system.
View 1 Replies
View Related
Jun 8, 2011
I'm trying to make recursive makefile work but it's giving me two problems. I have a top folder with the main Makefile and one Makefile for each sub folder 'one' and 'two'. Makefile in subfolder 'one' and 'two' are identical. The top Makefile (still a bit messy) looking like this:
Code:
# Directories
CC = gcc
CFLAGS = -Wall -Wextra
TARGET_DIR = bin
MAIN_FILE = one.c
[Code]...
View 4 Replies
View Related
Jun 14, 2010
I downloaded linphone 3.30 using mozila and tried installing. while giving the command ./configure it was successful and next giving the command make gives me a error message make file is not found. but makefile.am and makefile.in is already available in the current working directory.
I have given the link of the pastebin for ./configure command and make command..
View 4 Replies
View Related
