I needed an open source alternative to after effects so i went for jahshaka but after following the instructions, i type in 'make' and hit return and it says "make: *** No targets specified and no makefile found. Stop." am i missing something obvious? i have looked around the web, but no-one has this problem that i can find i am using ubuntu 10.04.
View 2 RepliesI recently switched over to Fedora 13 but I'm having a bit of trouble. I've tried writing simple programs in Emacs and Eclipse but neither will compile. It always gives the error, "make: *** No targets specified and no makefile found. Stop."
I've looked around at a couple of forums, but people with the same issue can't install software, but I can. I got Fedora from the Fedora website so I know its complete, but I have the sneaking suspicion that I'm just missing a file or something.
im trying to install Squid clamav with squid(fedora11, 386MB, 2.6kernel)..i configured clamd and is working fine,(squid wrking fine) then i tried to install squidclamav via (yum -y install curl-devel).then i downloaded squidclamav-4.0.tar.gz and extracted.. then i run ./configure and then make.but make install command wont work; it shows an error.
View 4 Replies View Relatedi have installed mouse trap by the Ubuntu "easy peasy" software center ,but for some reason it didn't work so i uninstalled it and start to install the mouse trap from herehttp://live.gnome.org/MouseTrap/Installationbut when did the "make" step it gave me that error:make: *** No targets specified and no makefile found. Stop.so how i fix thatand another problem that i have is when i go to a live radio on the net to listen it dose not work how do i change it to work like i changed to the "vlc player" to be the first program that opens
View 2 Replies View RelatedI am using Kubuntu 11.04 on ASUS K52Jc and when I start compiling this happens: (yes,yes I do ./configure; after that) q12345@Laptop $ make make: *** No targets specified and no makefile found. Stop. and what is so weird? Well, I can't do it on any other system that I tried (openSuSE, all Ubuntus, Debian...).
View 2 Replies View RelatedI'm using openSUSE 11.1, KDE I'm trying to install the module Apache2::Request to my OS. After the gzip -dc libapreq2-2.12.tar.gz | tar -xof - I typed in Shell these (as shown in INSTALLATION document of module): perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs Then something goes wrong, make doesn't work saying: make: *** No targets specified and no makefile found. Stop..
I think the problem is in the command perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs in section .../path/to/apache2/bin/apxs . What does mean ./path/to/apache2/bin/apxs? Maybe I should write the path to apache2 which contains a file named apxs? I did not find such file apxs. My apache2 path is /etc/apache2, but there is no file named apxs... Result for perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs:
[Code]....
I seem to be running into this issue a lot when installing various programs. I downloaded and installed a tar file (Linux Wacom Project. xf86-input-wacom-0.32.0 specifically) for my Bamboo tablet. Here's what I did:
Code: Select allsudo apt-get install build-essential
Looks like everything went well, but it asked me for a CD?... I just ignored that and went to the next step in the guide.
Code: Select allsudo apt-get build-dep wacom-tools
Looks like everything went well here. But near the end I get this...
Code: Select allchecking for doxygen... no
configure: WARNING: doxygen not found - documentation targets will be skipped
checking for rint in -lm... yes
checking for XORG... no
configure: error: in `/home/mason/Desktop/xf86-input-wacom-0.32.0':
configure: error: The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config.
Alternatively, you may set the environment variables XORG_CFLAGS and XORG_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.
I didn't really pay attention to THAT until I do...
Code: Select allcd ~/Desktop/linuxwacom-0.8.8-6
./configure --prefix=/usr
make
Where in I get this error message after I enter in Code: Select allmake at the terminal
Code: Select allmake: *** No targets specified and no makefile found. Stop.
I download a package of tar.gz ...
1:firstly I extract it on desktop
2:Then use cd command and go to extracted folder
3:To install that package i use
sudo make install. Then I got a error message
"make: *** No targets specified and no makefile found. Stop."
I'm trying to install Apache2::Request module (from CPAN.org) and in shell there is such messages: I'm using openSUSE 11.1, Perl 5.8
[Code]...
i m trying to install glib on my pc but i was always encounter a probelem in make. it says "No Target Specified No Makefile Found Stop"
[code]...
I want to gave much details as possible. working directory (~/a1/shell) in the shell directory i have Makefile. also in the shell directory i have subdirectory's (obj, src, include)
My current Makefile
Quote:
#What needs to be built to make all files and dependencies
clean:
# End of Makefile
I wanted it so: all .o files are created in the obj subdirectory, and my application, sshell, is created in the shell directory.
I am getting this error when i run the make run: No rule to make target 'shell.h', needed by 'shutil.o'. stop
I have xubuntu 9.10 and I'm trying to install iw-0.9.19.When I use the command "make" I get this error:
/bin/sh: pkg-config: not found
/bin/sh: pkg-config: not found
Makefile:38: *** Cannot find development files for any supported version of libnl. Stop. I read the Readme file and it says: "To build IW, just enter make. If that fails, set the PKG_CONFIG_PATH environment variable to allow the Makefile to find libnl". I guess the problem is linking Makefile (in iw-0.9.19 directory) to libnl (version 1.1 correctly installed on xubuntu) via pkg_config_file.
I'm trying to load drivers from .tar.bz2 file. I got the .tar opened and extracted to directory ABC. When I try to CD to that directory, I get a message the directory does not exist even tho' I'm looking right at it and the ls command shows it. The full path is user/downloads.ABC.
When I try to run the next command $tar -xvzf DPB_RT2870_Linux_STA_x.x.x.x.tgz I get a message Ubuntu 10.04 cannot find -xvzf. When I try to run the Makefile command locate in the same ABC directory, I again the error message cannot find Makefile.
I downloaded mesa from their git repository a few days ago then built it and installed it. I've tried removing it just now with "make uninstall", but that feature isn't in the makefile. How I can remove it?
View 1 Replies View RelatedTwo weeks ago my computer started freezing on start up when plugged in. It was suggested to upgrade the APM. What is this and is it not updated through the package update? If not how do I upgrade it?
View 1 Replies View RelatedWhy, after a successful (I thought) dual boot installation w/ a side-by-side lynx and meerkat install and XP does my system refuse to boot? It just gets to the Dell screen, giving boot options (none of which are making any difference) and keeps looping it. Last night, after re-installing the grub (lost after the XP install) everything was working fine. I powered down and this morning tried to restart and...this. I really don't want to have to reinstall everything and reconfigure and reinstall apps--what can I do? And more importantly, WTF did this happen to begin with?
View 1 Replies View RelatedI've been trying to figure out how to use make and makefile to compile and link some .cpp/.h. All i seem to find on google says to read the README for the software. But this is my own created c++ project. Im just looking for a simple makefile for my own .cpp/.h files( about 20 total).
I have tried using 2 different makefile "examples" as a template, but neither worked. I am getting error saying "file1.cpp: no newline character at end of file". or something to that degree.
Does anyone know if it is possible to make rules in a Makefile that would work like this:
> make debug module
or
> make module debug
where module can be any module that has a specific rule in the Makefile.
The thing I have is a Makefile with different rules that I compile like this:
> make module
What I would like is to add an option so I can compile whichever module with debug-information just by adding a debug to the make command. The debug-information I know how to do, the problem is how to make the Makefile work...
I have a number of projects, say test1, test2, test3,. I want to make and install all of them in exactly the same way; so I would like to say
make test2
make install test2
with the same Makefile.
In other words, I would like to pass the argument test2 (or just 2) to the Makefile, so this is taken as the target for make or make install. This must be a common wish; but I don't see any appropriate option with "man make" on my Fedora-12 system.
I'm trying to make recursive makefile work but it's giving me two problems. I have a top folder with the main Makefile and one Makefile for each sub folder 'one' and 'two'. Makefile in subfolder 'one' and 'two' are identical. The top Makefile (still a bit messy) looking like this:
Code:
# Directories
CC = gcc
CFLAGS = -Wall -Wextra
TARGET_DIR = bin
MAIN_FILE = one.c
[Code]...
Trying to build a driver for a TV tuner card. When I enter 'make menuconfig', I get this error:
make[2]: Entering directory `/usr/src/linux-headers-2.6.32-5-amd64'
/lib/modules/2.6.32-5-amd64/source/scripts/Makefile.build:44: /lib/modules/2.6.32-5-amd64/source/scripts/basic/Makefile: No such file or directory
make[3]: *** No rule to make target `/lib/modules/2.6.32-5-amd64/source/scripts/basic/Makefile'. Stop.
make[2]: *** [scripts_basic] Error 2
Suspect I need another package in addition to linux-headers.
Running Squeeze, amd64, KDE.
I am new to Linux and I am trying to install a C program from source using Makefile. So I 've created a "hello world" program and then a Makefile to install it. Then I logged in as root and used
make install
The following error occurs:
make: execvp: /usr/bin: Permission denied
make: *** [install] Error 127
Here is the Makefile:
CC=gcc
CFLAGS=-c -Wall
PROGS = hello
INSTDIR = $(prefix)/usr/bin/
INSTMODE = 0755
INSTOWNER = root
INSTGROUP = root
all: $(PROGS)
$(PROGS): main.o
$(CC) main.o
main.o: main.c
$(CC) $(CFLAGS) main.c
install:$(PROGS)
$(INSTALL) $(INSTDIR)
$(INSTALL) $(INSTMODE) $(INSTOWNER) -o $(INSTGROUP) $(PROGS) $(INSTDIR)
clean:
rm -rf $(PROGS) *o $(PROGS)
So, where are the errors
I'm just learning to use Eclipse (have previously been a vim+make developer). I created the standard Hello World project following the tutorial. The program compiles fine, but if I build it again without cleaning the project, make aborts with a glibc double free message (pasted below). The same thing happens if I run make in the Debug directory outside eclipse. I don't know make well enough to figure out what the problem is, and to my mind Eclipse shouldn't be generating a buggy makefile anyway.
I've attached a tarfile of the project directory. Download the file and the following sequence of commands should show you the problem:
tar xvzf HelloWorld.tar.gz && cd HelloWorld/Debug && make && make
Also, if you think it would be worthwhile submitting a bugreport to the Fedora Eclipse dev team, let me know where I can do that and I'll be happy to.
Error messages:
11:07:34 [michael@tablet Debug]$ make
*** glibc detected *** make: double free or corruption (fasttop): 0x0000000001fd5780 ***
= Backtrace: =
/lib64/libc.so.6[0x3b03e75a96]
make[0x411f46]
make[0x411fb2]
make[0x411feb]
make[0x40771e]
make[0x411177]
/lib64/libc.so.6(__libc_start_main+0xfd)[0x3b03e1ea2d]
make[0x402429]
= Memory map: =
00400000-00428000 r-xp 00000000 fd:04 1517952 /usr/bin/make
00628000-0062a000 rw-p 00028000 fd:04 1517952 /usr/bin/make
01fc0000-01fe1000 rw-p 00000000 00:00 0 [heap]
3b03a00000-3b03a1f000 r-xp 00000000 fd:00 81929 /lib64/ld-2.10.1.so
3b03c1e000-3b03c1f000 r--p 0001e000 fd:00 81929 /lib64/ld-2.10.1.so
3b03c1f000-3b03c20000 rw-p 0001f000 fd:00 81929 /lib64/ld-2.10.1.so
3b03e00000-3b03f64000 r-xp 00000000 fd:00 81933 /lib64/libc-2.10.1.so
3b03f64000-3b04164000 ---p 00164000 fd:00 81933 /lib64/libc-2.10.1.so
3b04164000-3b04168000 r--p 00164000 fd:00 81933 /lib64/libc-2.10.1.so
3b04168000-3b04169000 rw-p 00168000 fd:00 81933 /lib64/libc-2.10.1.so
3b04169000-3b0416e000 rw-p 00000000 00:00 0
3b08e00000-3b08e19000 r-xp 00000000 fd:00 81991 /lib64/libgcc_s-4.4.1-20090729.so.1
3b08e19000-3b09019000 ---p 00019000 fd:00 81991 /lib64/libgcc_s-4.4.1-20090729.so.1
3b09019000-3b0901a000 rw-p 00019000 fd:00 81991 /lib64/libgcc_s-4.4.1-20090729.so.1
7f6032b9d000-7f6037c70000 r--p 00000000 fd:04 1155417 /usr/lib32/locale/locale-archive
7f6037c70000-7f6037c74000 rw-p 00000000 00:00 0
7fffa6c19000-7fffa6c2e000 rw-p 00000000 00:00 0 [stack]
7fffa6c44000-7fffa6c45000 r-xp 00000000 00:00 0 [vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Aborted
Code:
anisha@linux-p0mg:~> uname -r && cat /etc/*release
2.6.25.5-1.1-pae
openSUSE 11.0 (i586)
VERSION = 11.0
My small Makefile:
Code:
obj-m += serialPortISR.o
all:
make -C /lib/modules/$(shell uname -r)/build M=$(PWD) modules
clean:
make -C /lib/modules/$(shell uname -r)/build M=$(PWD) clean
Errors I receive:
Code:
anisha@linux-p0mg:~/Desktop/serialPortISR_31_10_09> make
make -C /lib/modules/2.6.25.5-1.1-pae/build M=/home/anisha/Desktop/serialPortISR_31_10_09 modules
make[1]: Entering directory '/usr/src/linux-2.6.25.5-1.1-obj/i386/pae'
make[1]: *** No rule to make target `modules'. Stop.
make[1]: Leaving directory '/usr/src/linux-2.6.25.5-1.1-obj/i386/pae'
make: *** [all] Error 2
I have no clue of how install jahshaka...I'm using fedora 13 64 bits and videocard 1gb. I tried install through tar.gz but tne MAKE command does'nt work.
This is the anwer:
I am following the instructions on Section 8.1.* Device Driver ConceptsHere I was able to proceed till section 8.1.4.After making the hello.c file,the make file and patching the Kconfig as mentioned,I tried to run the $ make ARCH=ARM CROSS_COMPILE=xscale_be- gconfig This gave error as:make: *** No rule to make target `gconfig'. Stop.I am not sure if my kernel is correctly compliled,but I was able to complie and build the kernel for arm before by cloning the kernel and building from the following link without any error. https://omapzoom.org/gf/project/omap...ux+OMAP+Kernel
View 2 Replies View Relatedwhen i install bochs and make the makefile why undefined reference to `pthread_create'
View 1 Replies View RelatedI am facing an error when I run the following command.
Command: autoreconf -i
Error: man/Makefile.am:11: `%'-style pattern rules are a GNU make extension
[code]....
I'm using Fedora Core 11 on Dell Machine Precision 360
I just downloaded slackware 13.1(x86) and i'm trying to compile ndiswrapper-1.56 using the slackbuild from slackbuils.org and i'm getting this error:
Code:
Makefile:535: /usr/src/linux-2.6.33.4/arch/i486/Makefile: No such file or directory
make[2]: *** No rule to make target `/usr/src/linux-2.6.33.4/arch/i486/Makefile'. Stop.
make[1]: *** [modules] Error 2
make: *** [all] Error 2
looks like the folder i486 doesn't exist
I'm trying to install the Freewins Compiz plugin (because I often use my computer while I'm horizontal on the couch; and I realize that's lazy), and I'm trying to use the instructions from the page,I've googled this and found one guy that has the same problem but no solution, and other pages that talk about Freewins have the exact same instructions for installing.Does anybody have any idea how to get this working correctly?
View 4 Replies View Related