Ubuntu :: Error Message Trying To Access /ect/default/grub
Dec 11, 2010
I just updated to 10.04 LTS & I would like to edit my grub menu to get rid of the unneeded entries.
When I enter /etc/default/grub into terminal It gives me bash: /etc/default/grub: Permission denied.
From what I have read I just need to put # in front of what I don't want to see in the menu, but I'm unable to access the file to make the changes.
I would also like to make a backup of the file first before editing it.
View 9 Replies
ADVERTISEMENT
Feb 21, 2010
I been running both OS's for a few months now with no major problems besides wireless internet issues. Today, however, as I go to boot my laptop up, the Dell logo loads with the F2 and F12 boot and setup options which both work. Directly after that though I get the message "GRUB loading. Symbol '?' not found. Aborted. Press any key to Exit." then it repeats when I push a key, and then it tells me to press F1 to retry, F2 to go to setup, or F5 to run diagnostics. It passes all the tests in diagnostics. I've tried booting off of the ubuntu cd I used to load it initially with no luck. So I'm stuck at either that error message or in setup but I can't go any further, and it does not change anything when I tried to boot from the cd.
View 8 Replies
View Related
Apr 13, 2011
I'm currently setting up a dell server with hardware raid 1 on sas 6r. i got 4 sas installed on the server and configured to raid 1 as stated below,
array 1:
slot 0 & 1
array 2:
slot 2 & 3
during the installation, the installer detect the array 2 as sda and array 1 as sdb.. so i proceed with installation on array 2. after completed the installation, the first reboot lead me to a 'grub-rescue" prompt. by following the guide at url Mode, i've noticed that the boot folder has changed to (hd1,1), which i believe it has changed to sdb1. default root device shows that prefix=(hd0,1)/grub.
View 3 Replies
View Related
Feb 11, 2010
I've got the Philips GoGear HDD1429 MP3 Player (4Gig), and it keeps annoying me. I can not sync it with Songbird, so I used Rhythmbox and it worked fine. Now I can't even access the player and plugging it in gives me this error message: The folder contents could not be displayed.
Sorry, could not display all the contents of "Philips HDD14XX GoGear": DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
View 1 Replies
View Related
Jan 11, 2011
I use ubuntu 10.10. Everything was great until i formatted my C drive which had win xp. Now at startup an error message occurs instead of booting ubuntu (BOOTMGR is missing. Press Cntrl+alt+delete to restart). I searched a little bit and found that may be I need to install GRUB (boot loader). how do i install grub? using "fdisk -l" .. I found out that my bootable partition is C drive (NTFS /dev/sda1) while ubuntu is installed on another partition (ext3 /dev/sda3)!
View 7 Replies
View Related
May 21, 2010
I have just installed Lucid Lynx as after a live run of it I thought it was about time to upgrade. Everything ran smoothly in the live version so I backed up my files and installed it. When I went to boot I get this -
Grub loading, please wait ...
Error 2
The strange thing is it seems to be specific to the computer. I have an older, lower spaced desktop, computer that I tried the hard drive in and it worked fine. Problem is its too low spaced for what I want so it seems the install went ok but its something with the computer? How I would be able to boot into the install?
View 9 Replies
View Related
Apr 20, 2011
I have an old computer that I use for trying out software and other things before putting them on my newer machine so as to avoid irreparable damage. The machine has 2 hard discs; the first disc contains Windows and I wanted to use the second disc for Linux. I installed Fedora 14 on the second disc and followed this with Ubuntu 10.10.
After I installed Fedora I re-booted and had a choice between booting into Windows or Fedora. After adding Ubuntu I assumed that Grub2 would pick up both Windows and Fedora and add them to the grub menu but instead, the grub menu only contained the options to boot Fedora or Ubuntu. I tried running 'sudo update-grub' but got the following message:
"cannot access /var/lib/os-prober/mount/boot
Boot: No such file or directory"
When I had a look in /os-prober all that was there was a file called 'labels' and when I opened it it consisted of the one line "Fedora 1" It looks to me, who doesn't know a lot about grub2, that something is missing from grub and had wondered whether to re-install it or whether doing so would be jumping out of the frying pan into the fire.
View 4 Replies
View Related
Mar 30, 2010
i got a dual-boot. both are debian. yesterday i upgraded one of them to debian-squeeze and to grub2.that installations boots just fine.but for the second i get the error message from the thread title:"render error detected"after the grub-menu.if i choose single user mode it boots and hangs waiting for the root file system.i found this results at google (which i am not allowed to post yet) but i don't understand them.
View 8 Replies
View Related
Oct 2, 2010
I was trying to install ubuntu 9.10 as a dual boot system with windows and I recieved this error message: The Grub package failed to install into /target/. Without the Grub boot loader, the installed system will not boot
This Error comes up after 94% of the install. I also cannot seem to get the side by side install option to work (sometimes this option appears sometimes it does not) I am not sure but I beleive seome of the install files have been placed on the hard drive because I only get the option now to install on the hard drive and totally wipe clean or the emptiest hard drive. So how would I get the possible Ubuntu install off the Hard drive. I have used this CD to Install before it has no scratches therefore should work. Also If I have Win Xp on a Raid 0 will the Ubuntu 9.10 install ?
View 4 Replies
View Related
Nov 16, 2010
Today, I finished assembling my dream computer. I can boot it into the BIOS, and I checked that everything was working correctly through there. Anyway, I attempted to transfer the hard drive from this computer to that one. This computer is a Dell (blech) Optiplex GX280 with an Intel processor and integrated graphics. The new one has an AMD Phenom II processor with an ATI card and an ASRock motherboard (drastically different machines, I know...) When I try to boot, GRUB gives me an error message that says something like:
Code:
blah whatever cannot find /dev/disk/by-uuid/372de761-9577-48be-ba19-c6b2890cb229
Did I do something wrong installing the hard drive? Or is this a problem that is going to happen no matter how hard I try to make it not happen? If the second is true, will it help if I wipe the disk and reinstall Ubuntu on the new computer?
P.S. I know similar threads about transferring hard disks have been posted, but no thread has mentioned this error.
View 4 Replies
View Related
Jun 24, 2010
I have Samba 3.5.3-61 running on a Fedora Core 13 system. I created a share that is browseable to all systems, and I made sure to create a user account via the smbpasswd utility. When I try to connect to the server from a Windows XP system, I am able to enter the appropriate sharename as well as the username and password.
View 3 Replies
View Related
Oct 23, 2010
Just delete a linux partition and now when i boot a message appears and says error: unknown filesystem grub rescue >
I have search on the net for this problem and i have understand it a little. But my situation is a bit different and because i don't want to format my hard disc i wanna try to fix it. So before a couple months i download ubuntu 9.10 and i installed it a month later. But my computer used to crash all the time and i couldnt use it. So i download the latest ubuntu 10.4 and install it while having windows xp and the old ubuntu 9.10(so i had windows xp, ubuntu 9.10 and ubuntu 10.4 partitions). Now i tried to delete the partition of ubuntu 9.10 from disc utility. so i have the message i wrote above when i boot. I dont wanna delete my windows xp and ubuntu 10.4. what should i do to stop this message from appearing.
View 1 Replies
View Related
Feb 11, 2011
I'm dual-booting Windows 7 and Suse 11.3, installing suse second on a seperate 80GB drive. After a ridiculous amount of faffing around due to my dvd writer essentially not working, finally get suse installed, messing with GRUB settings in an attempt to preserve Windows' boot manager, restart; GRUB error 22.
Go through the whole process again, this time accepting the use of grub and not changing anything from default - exactly the same response. None of the tens of boot disks/utilities I've tried will allow me into suse to have a look at the grub config. There are no applications for windows that will allow me to write to ext3.
View 9 Replies
View Related
Jan 5, 2011
My Main goal is to get to important data in the HDD which I hope can be backed up in a USB so I can then reformat and reinstall Ubuntu.
Ubuntu version 9.04 (Jaunty)
Pentium 4 PC Desktop
20gig Hardrive
Dedicated Ubuntu, no dual boot or anything, the HDD is fully for Ubuntu only and partitioned that way. 1st Problem: I encountered an error while using Ubuntu and OOffice, so I restarted. Right after the restart I got an error:
[code]...
I researched this in the forums, and the suggestions are to boot with a LiveCD and fix. Unfortunately I have just burned a liveCD now, though I was able to make a liveUSB, and plugged it in. Problem is that during the boot up of LiveUSB, I encountered another Error:
[code]...
Above is problem no. 2 At this point I gave up trying to recover Ubuntu, so I'm just in data recovery mode. My goal as mentioned is to get to the files, back them up and start from scratch.......
View 3 Replies
View Related
Jun 17, 2010
Ubuntu hung up so I restarted my computer now I get the error message: "out of disk" and the grub console (and I have no idea what to do there) I'm currently working on a Live system and when I try to manually activated the software RAID I set up via Alternate installer and I get:
$ sudo dmraid -r
no raid disks
View 2 Replies
View Related
Jan 4, 2011
i have search for a long time regarding this matter but i couldn't found nothing.... The facts are like this:
1. I have a server on Ubuntu Linux 10.10 with the following modules installed:
- Webmin 1.530
- BIND DNS Server
- Fetchmail Retrieval
- Dovecot
- Postfix
- a domain (www.domain.com) - the website it's not hosted on my machine
What i did until now:
- establish a local mail network like user@testserver.local
- successfully installed and configure Fetchmail Retrieval. like: user@domain.com mapped to user@testserver.local
2. The problem: Sending an e-mail using a POP3 client like Outlook from an local account! If i use the local address and try to deliver a message outside my local network the following error is sent by System Administrator: Code: Your message did not reach some or all of the intended recipients.
[Code]....
View 4 Replies
View Related
Dec 2, 2010
I have recently been attempting to install GASP for Python. After several attempts I finally managed to find the .tar file, since yum's GASP was severely outdated. After downloading, I have to extract the file to /usr/libexec/perf-core/scripts/python/, and once I tried to do so in the Ark package manager, nothing would extract after several attempts. I then tried to move it in the Dolphin FileBrowser and got this error message:
Access denied to /usr/libexec/perf-core/scripts/python/gasp-0.3.3.tar.gz.
After much googling and FAQ searching, I have had no results.I am running Fedora 14 KDE build,and have been doing so for about about a week,without any previous Linux experience, so it is probably user error.
View 3 Replies
View Related
Jun 7, 2010
I was messing around with the partitions and accidentally y deleted the ubuntu partition! I have Windows 7 as a dual boot but I can't access to that OS anymore. The message that I get is: error: no such partition. grub rescue>
View 5 Replies
View Related
Feb 8, 2010
I am running Postfix 2.6.1 on Suse 11.2, and am receiving an error message on my windows machine saying "Recipient address rejected: Relay access denied." If I login to my email on the local machine or via squirrelmail I have no problem sending mail. The output of postconf -n is as follows:
server:~ # postconf -n
alias_maps = hash:/etc/aliases
biff = no
[code]....
View 1 Replies
View Related
Dec 31, 2010
Using IMAP to retrieve emails in Evolution is not working correctly. Some messages are recieved, others are not. Those messages that cannot be recieved, reports the following error message: Unable to retrieve message
Running the following;
evolution 2.28.3-0ubuntu10
Ubuntu 10.04.1 LTS
2.6.32-26-generic
View 4 Replies
View Related
Apr 30, 2009
Hi I am running a fedora 10 desktop. when i send an email using evolution the message was not sent but returns a error message:"Error while performing operation.DATA command failedError: 550 Viagra SPAM - Hi in Subject" and the message did not have an attachment just plain words. what might have gone wrong for i have been using this for sometime without a problem. or what security measures should be in place to remove this viagra spamAm I infected by virus on this fedora, all my updates are up to date.
View 1 Replies
View Related
Nov 10, 2010
Im trying to instal Sun Virtualbox but when download completes and I click on install I get the following error>>Message did not receive a reply (timeout by message bus) I wont even bother with this software if there are others out there that are as easy to use. I used it on Windows and thought it was great ! (thats how I eventually switched to Linux, by using it virtually at first)
View 5 Replies
View Related
May 29, 2010
I have already had Vista installed on another drive and from what i've read on the webs you get to dualboot if you install ubuntu after vista. when i did install it (i installed on a blank hdd with no partitions, choosing the "erase entire disk" option since for some reason default option was attempting to eat a part of my windows 1 gb drive instead of using disk i specially made for it) and the grub 2 loaded for the first time, there was NO option to run vista. only 2 linux (normal and recovery) and 2 memtests. I've ran linux and went to google this. I found that i should add something to some config files in /etc/grub.d/From reading the readme file i understood i could add my own files that are named like NUMBER_SOMENAME and insert code into them. Because it said:Quote: For example, you can add an entry to boot another OS as01_otheros, 11_otheros, etc, depending on the position you want it to occupy inthe menu; and then adjust the default setting via /etc/default/grub. But then i found a file 40_custom that said:
Code:
#!/bin/sh
exec tail -n +3 $0
[code]....
View 9 Replies
View Related
Nov 12, 2010
I've been trying change the default OS in GRUB. I changed the value for GRUB_DEFAULT in etc/default/grub. However, when I run update-grub, I get the following error:
/etc/default/grub: 19: e: not found
View 7 Replies
View Related
Nov 23, 2010
I have a dual boot system with ubuntu 9.10 x64 and Windows 7. Everything has been working fine for a a long time but yesterday I tried to delete an unused partition through the Disk Utility in ubuntu (System->Adminstration->Disk Utility) and everything was messed up. I used to get the "Grub error: Unknown filesystem". I managed to create an ubuntu bootable usb and followed some tutorials for fixing grub but all i managed to do is to get another error: "Grub error: No such disc". After some experimentation i got
"Grub stage 1.5" which gave me a grub> command prompt./dev/sda is the drive containing Windows and Ubuntu.
Code:
[ Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 0.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #6 for /boot/grub/stage2 and /boot/grub/menu.lst.
[code].....
View 5 Replies
View Related
Jul 8, 2011
I am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
View 9 Replies
View Related
Jun 23, 2010
Ubuntu 10.04 was in small slave-disk, and I put other bigger disk same type IDE/ATA.In first start I get message: "no such device....., grub rescue."Anyway, I make installation in this disk and and now after start message is: "error: out of disk, grub rescue.So now I can not use master/XP and no slave/Ubuntu.
View 3 Replies
View Related
Apr 26, 2011
Ques-1 what is the default bashrc and how i can set path java and tomcat?
Ques -2 When I start the terminal it showing the following line ? How i cat solve this?
Command 'lesspipe' is available in the following places
* /bin/lesspipe
* /usr/bin/lesspipe
The command could not be located because '/usr/bin:/bin' is not included in the PATH environment variable.
lesspipe: command not found
Command 'dircolors' is available in '/usr/bin/dircolors'
The command could not be located because '/usr/bin' is not included in the PATH environment variable.
[code]....
View 3 Replies
View Related
Nov 22, 2010
When the computer boots in Slackware 13.1 i get the default welcome message: "Welcome to Linux 2.6.33.4-smp (tty1)". How do i change it?
View 2 Replies
View Related
Oct 23, 2010
[code]...
Gives error message permission denied. I've seen this in your forums but I still haven't found the fix. I've tried the latest release Wubi downloader too. This one is ran from a CD. Version 10.04
View 3 Replies
View Related
