I have recently been attempting to install GASP for Python. After several attempts I finally managed to find the .tar file, since yum's GASP was severely outdated. After downloading, I have to extract the file to /usr/libexec/perf-core/scripts/python/, and once I tried to do so in the Ark package manager, nothing would extract after several attempts. I then tried to move it in the Dolphin FileBrowser and got this error message:
Access denied to /usr/libexec/perf-core/scripts/python/gasp-0.3.3.tar.gz.
After much googling and FAQ searching, I have had no results.I am running Fedora 14 KDE build,and have been doing so for about about a week,without any previous Linux experience, so it is probably user error.
I have Samba 3.5.3-61 running on a Fedora Core 13 system. I created a share that is browseable to all systems, and I made sure to create a user account via the smbpasswd utility. When I try to connect to the server from a Windows XP system, I am able to enter the appropriate sharename as well as the username and password.
i have search for a long time regarding this matter but i couldn't found nothing.... The facts are like this:
1. I have a server on Ubuntu Linux 10.10 with the following modules installed: - Webmin 1.530 - BIND DNS Server - Fetchmail Retrieval - Dovecot - Postfix - a domain (www.domain.com) - the website it's not hosted on my machine
What i did until now:
- establish a local mail network like user@testserver.local - successfully installed and configure Fetchmail Retrieval. like: user@domain.com mapped to user@testserver.local
2. The problem: Sending an e-mail using a POP3 client like Outlook from an local account! If i use the local address and try to deliver a message outside my local network the following error is sent by System Administrator: Code: Your message did not reach some or all of the intended recipients.
I am trying to use Wireshark and on startup the program pops up a window saying: Couldn't run /usr/sbin/dumpcap in child process: Permission denied Are you member of 'wireshark' group? Try running 'usermod -a -G wireshark <username>' as root.
I ran the usermod command to add my account in the group and checked it Code: less /etc/group wireshark:x:490:myaccount but the same error message pops up.
I have got centos 5.3 running on my system. I have installed vsftpd and created a separate folder to upload files (upload folder created in/var/ftp/pub). From my client end I can download ftp files but when I try to upload files from my client I get a error message 550: permission denied. The upload folder has full permission ie 777. Checked the ftp config file everything looks ok.
I am running Postfix 2.6.1 on Suse 11.2, and am receiving an error message on my windows machine saying "Recipient address rejected: Relay access denied." If I login to my email on the local machine or via squirrelmail I have no problem sending mail. The output of postconf -n is as follows:
server:~ # postconf -n alias_maps = hash:/etc/aliases biff = no
I recently installed 64-bit Ubuntu Maverick. This was a clean install as opposed to an upgrade. Since the install I have been having a heck of a time getting a remote filesystem mounted via nfs. The file system I have been trying to mount is located on my HDX-1000 media server. This machine is running a flavor a linux as it's operating system, and I have been using it for about 2 years now. I have been able to mount it's filesystem on all other machine in my house which include Windows 7, and a couple of earlier versions of Ubuntu linux. But I just could not get it to mount using Maverick. I kept getting the "mount.nfs access denied by server while mounting ..." message. Finally, I found a list of all the different parameters that can be specified on an entry in the fstab. The one that worked for me was simply to change the fstab entry from this:
I have same problem with *.bin files.When I try to install software from *.bin file I see error:
Code: [andrew@notebook Programming]$ ./installbuilder-qt-professional-6.3.0-linux-x64-installer.bin bash: ./installbuilder-qt-professional-6.3.0-linux-x64-installer.bin: Access denied [andrew@notebook Programming]$ When I run command ls -la I see this:
Code: [andrew@notebook Programming]$ ls -la installbuilder-qt-professional-6.3.0-linux-x64-installer.bin -rwxrwxrwx. 1 andrew andrew 82624164 Апр 4 16:39 installbuilder-qt-professional-6.3.0-linux-x64-installer.bin [andrew@notebook Programming]$ This error exist if I try to install this application with root access. What I mast do for fix this error?
P.S. I have Fedora 12 x86_64 on my notebook ASUS M51Sn.
Gives error message permission denied. I've seen this in your forums but I still haven't found the fix. I've tried the latest release Wubi downloader too. This one is ran from a CD. Version 10.04
Every time I try to empty the waste bin I get dolphin error - 'The file or folder /.local/share/Trash/files/IMGP1676.DNG does not exist'I tried to recreate the file 'IMGP1676.DNG' , deleted it i.e. sent i to the waste bin and then tried the empty waste bin again, although this time it was there and deleted it still reported the same error.du -h .local/share/Trash/files/ 12K .local/share/Trash/files
Is it possible to change the general permission denied error. I have some rather young users on this system that think they can "hack the gibson" and I would love to change the general error message to something a little more rude/funnyex:# cd restricted area -sh: cd: restricted area: Permission deniedI am curious if its possible to change the error message in general?ex:# cd restricted area-sh: cd: restricted area: (funny/rude message goes here)Quick info:This is a Gentoo 2008.0 system, I would also love to do this on my slacware and OpenBSD boxes as well just for kicks.
I have not done the SMTP debug yet but just from basic troubleshooting, I think I know what the problem is. My mail server is rejecting my web server from sending mail due to 'relay access denied':
Code: root@www:# telnet mail.domain.tld 25 Trying 211.113.101.135... Connected to mail.domain.tld. Escape character is '^]'.
I cannot install files from source (tar.bz, tar.bz2, tar.gz, etc) my latest attempt began at tuxfiles. following the 'tutorial', if you will, I managed to unpack the files; but when it came to the ./configure step, I got the following error: zsh: no such file or directory: ./configure
Here I figured different distros, slight variances, so instead I tried putting a space in the command (./ configure), and got this error. zsh: permission denied: ./
So finally I tried both ./configure and ./ configure as su and I still got the same errors... this is the same problem that I've always had when installing from source. I am using Fedora 12.
I am having difficulties with Pure-FTPD. I had it working at one time. I recently had to reinstall Ubuntu 10.10 because pure-ftpd stopped working for some reason and now I have a fresh install but pure-ftpd still does not work. This is what I did to install it.
Sudo apt-get install pure-ftpd
Using the Ubuntu Spftware Center I installed PureAdmin. I then create a virtual user. Then in the terminal entered the following:
[code]...
I read somewhere that this could be a filezilla issue and to fix it I need to use active mode and use the filezilla external address [URL]... Of course I did this and the filezilla solution did not work this time. I am fairly sure it is a server issue this time.
running Ubuntu 10.10 and mozilla and seamonkey... Tried to access a website: [URL] and got the error: The page cannot be displayed You have attempted to execute a CGI, ISAPI, or other executable program from a directory that does not allow programs to be executed. Please try the following: Contact the Web site administrator if you believe this directory should allow execute access. HTTP Error 403.1 - Forbidden: Execute access is denied. Internet Information Services (IIS)
I just built an AMD Phenom II Six Core with 4 Gigs Ram a 160Gib / and swap, and (2) Two Tb mirror for Raid (data storage) I had been using DMRAID in the deprecated box but this box has MDADM v3.1.4 - 31st August 2010 from source (on MDADM wikipedia).
I have no permission problems with using the raid and dmraid is un-installed. The raid is working perfectly and is mounted in my fstab with ext4 defaults 0 2 as my options.
I have two exports /media/raid/Test /test
Both show IP and subnet on the showmount -e for the server. I can mount the test just fine on the server. I cannot, however, mount the /media/raid/Test error: mount.nfs: access denied by server while mounting hostname:/media/raid/Test Using dmraid I am able to have the deprecated box export and mount nfs shares from the raid but using MDADM on the new computer, I cannot. I get similar results with pointing MYSQL's data folder to a location on the "/media/raid/Database" (even with apparmor entries).
I mount a partition to a directory and ls -liah tells me that everyone has read/write/execute permissions on the whole thing, but I try to save a file into the partition and I get an access denied error. First of all this doesn't make sense because ls is telling me I do have access.
Then it gets weirder. I run sudo chown -R me:me directory. The command exits without error, but then when I go and look at the directory again with ls, it still shows up as owned by root and I still have the same problem. This is particularly strange because I am still able to change permissions normally in the operating system filesystem. It just won't work on the mounted partition.
I have been following this guide to install Apache, PHP & mysql - [URL]. When I get up to the step 'mysql -u root' I get given this error: Code: tom@tom-laptop:~$ mysql -u root ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: NO) How do I overcome this?
Hi I am running a fedora 10 desktop. when i send an email using evolution the message was not sent but returns a error message:"Error while performing operation.DATA command failedError: 550 Viagra SPAM - Hi in Subject" and the message did not have an attachment just plain words. what might have gone wrong for i have been using this for sometime without a problem. or what security measures should be in place to remove this viagra spamAm I infected by virus on this fedora, all my updates are up to date.
for some reason root lost grant privileges and I can't get it back. The user got grant_priv = 'Y' in the usertable. I've tried to reset all the priviliges to the user by killing MySQL process and started up again without grant options with no luck. I've also tried lots of other things but can't seem to get it work. Here is what I get: Quote:
[root@xxxxxxxxx mysqldba]# mysql -p Enter password: Welcome to the MySQL monitor. Commands end with ; or g. Your MySQL connection id is 2 Server version: 5.0.77 Source distribution
I need to get an old MySQL Client(4.1)to connect to an even older MySQL Server (3.23).The goal is to do a Java/JDBC connect to the old Linux/MySQL 3.23 database, in order to update text information for a Lucene search (which will also run on linuxdev2). The problem is that I can't connect to the Linux/MySQL 3.23 server from a remote Linux/MySql 4.1 client. I can't connect from JDBC; I can't connect from "mysql":
Code:
LOCAL (intranet): mysql -uSOMEUSER -pSOMEPASSWORD mysql => OK REMOTE (from linuxdev2): mysql -uSOMEUSER -pSOMEPASSWORD -hintranet mysql => FAILS: ERROR 1045 (00000): Access denied for user: 'SOMEUSER@linuxdev2' (Using password: YES)
I've got the Philips GoGear HDD1429 MP3 Player (4Gig), and it keeps annoying me. I can not sync it with Songbird, so I used Rhythmbox and it worked fine. Now I can't even access the player and plugging it in gives me this error message: The folder contents could not be displayed. Sorry, could not display all the contents of "Philips HDD14XX GoGear": DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
I run a mediaserver on Archlinux, working perfectly (or almost). I have set up NFS v3 and that worked for me on these clients:
- Debian Lenny - Archlinux 64bit
Now I've upgraded my Lenny-box to squeeze and I see that 2 of my 3 shared folders (tdone and twatch) are mounted like they should and the third one (media) doesn't come up. A 'mount -a' as root gives this error: mount.nfs4: access denied by server while mounting (null) My relevant fstab-lines:
I set up a servber on my local machine, & also PHp - Both working fine.I'm trying to load up MYSQL i have installed it, & *can* start/stop the server. however if I do anything else with it, I get this error :-
Quote:
root@gordon-desktop:~# sudo mysqladmin -u root -h localhost password MYPASSWORD mysqladmin: connect to server at 'localhost' failed error: 'Access denied for user 'root'@'localhost' (using password: NO)'
Query :-
1) How do I know MYSQL is actually active ? (apart from the message it says that its statrted (or stopped).
2) Is there a way to
a) Find out the usernames that are recorded on the MYSQL server ? b) set / RESET the 'root' username (I know MYSQL root user is different to PC root user) c) anything else I can do on the PHP / website code to see if MYSQL is working
(as yet, no tables / databases etc have been set up - as I can't get past this error message - I get the same error when setting up a database.)
Ps I did allow my usermname (when logged in to ubuntu) to edit / create files in the /usr/www/ directory (but it is still OWNED by 'root' - that directory)
