Ubuntu hung up so I restarted my computer now I get the error message: "out of disk" and the grub console (and I have no idea what to do there) I'm currently working on a Live system and when I try to manually activated the software RAID I set up via Alternate installer and I get:
$ sudo dmraid -r
no raid disks
I had a successful dual boot with win 7 and ubuntu 10.04. I just moved computers from a dell XPS with a P4 to a Xeon. I switched the hard drives between the machines. As I expected GRUB somehow imploded on the idea and now only displays a cruel "No such disk" message. Anyways, I was hoping to tap into someones vast knowledge of grub and re-configure it. It would make my day. I am also using a LiveCD so any commands I would use must be able to work on a LiveCD
fdisk -l
Code:
Disk /dev/sda: 203.9 GB, 203928109056 bytes
255 heads, 63 sectors/track, 24792 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xdf29521d
Device Boot Start End Blocks Id System
/dev/sda1 1 23781 191020851 83 Linux
/dev/sda2 23782 24792 8120857+ 5 Extended
/dev/sda5 23782 24792 8120826 82 Linux swap / Solaris
Disk /dev/sdc: 160.0 GB, 160000000000 bytes
255 heads, 63 sectors/track, 19452 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000f0422
Device Boot Start End Blocks Id System
Disk /dev/sdb: 300.1 GB, 300090728448 bytes
255 heads, 63 sectors/track, 36483 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xe3b8e3b8
Device Boot Start End Blocks Id System
/dev/sdb1 1 3863 31029516 7 HPFS/NTFS
/dev/sdb2 3864 36483 262020150 f W95 Ext'd (LBA)
/dev/sdb5 3864 36483 262020118+ 7 HPFS/NTFS
sudo update-grub
Code:
/usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?).
Company laptop HP Compaq 6710b, NTFS on hd0, Win7 installed. BIOS allows boot from USB drive, so wanted to use Ubuntu with no influence on laptop (no disconnecting internal drive, no dual boot, etc). Performed an install from CD to an USB drive making a JFS partition mounted on / and a swap partition. The installer made the JFS partition bootable (boot flag is set) as I asked. On first boot I got:
error: hd0 out of disk.
grub rescue>
Greetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
View 9 Replies View RelatedI been running both OS's for a few months now with no major problems besides wireless internet issues. Today, however, as I go to boot my laptop up, the Dell logo loads with the F2 and F12 boot and setup options which both work. Directly after that though I get the message "GRUB loading. Symbol '?' not found. Aborted. Press any key to Exit." then it repeats when I push a key, and then it tells me to press F1 to retry, F2 to go to setup, or F5 to run diagnostics. It passes all the tests in diagnostics. I've tried booting off of the ubuntu cd I used to load it initially with no luck. So I'm stuck at either that error message or in setup but I can't go any further, and it does not change anything when I tried to boot from the cd.
View 8 Replies View RelatedAfter updating my motherboard BIOS, I'm now getting these error messages every time I boot up:
[ 16.157447] ata3.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6
[ 16.157488] ata3.00: failed command: SET FEATURES
[ 16.157525] ata3.00: cmd ef/05:fe:00:00:00/00:00:00:00:00/40 tag 0
[Code].....
I've got a 200GB hard drive, using an ECS SiS 755 A2 motherboard w/1.1b BIOS.
I know nothing about this at all. I have never programmed a computer.. I loaned my tower to a friend who put this on ...now i have it back and cant get to my windows 98. all i get each time i boot is ...
GRUB loading ... error:no such disk grub recover>
I have tried ubuntu sec 8.4 recover mode and all i get is unreconized command.. i do not know how to set anything.. i have no disks for this not even the orginal windows recover disk.. is their anything i can do to get win to run as it use to??
Although I have been running Ubuntu for about 1 year I still regard myself as a Newbee! I have got away with not knowing anything about the Terminal or Command Lines. I am happy with Ubuntu and have become familiar with the OS and all the software I require. However, I have started to receive an error message which states, DISK FAILURE IS IMMINENT Does this really mean that my hard disk needs to be replaced or could there be something else that needs "tweeking"? I am running two operating systems: Ubuntu 10.4 and Windows Vista - but am using Ubuntu about 99% of the time. Everything is running OK except for the error message. What is the best approach to address the issue?
View 3 Replies View RelatedI just bought a brand new hardrive (40gb western digital) IDE, 10 pin.I have gone through the installation and partioned the hardrive, when it gets to 100% it asks me to reboot.So i take the disk out, and then it says DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER:So i press enter and i get the same message> How can i get Ubuntu to boot up?The computer is a 2003 Medion pc with 512mb of RAM And an AMD Athlon processor. The computer has a sticker on that says: Designed for windows xp.
View 9 Replies View RelatedI tried using the Windows installer, after not having success burning the ISO to cd, and I received another error message. "There is no disk in the drive. Please insert a disk into drive. DeviceHarddisk3DR3"
View 9 Replies View RelatedI just updated to 10.04 LTS & I would like to edit my grub menu to get rid of the unneeded entries.
When I enter /etc/default/grub into terminal It gives me bash: /etc/default/grub: Permission denied.
From what I have read I just need to put # in front of what I don't want to see in the menu, but I'm unable to access the file to make the changes.
I would also like to make a backup of the file first before editing it.
I use ubuntu 10.10. Everything was great until i formatted my C drive which had win xp. Now at startup an error message occurs instead of booting ubuntu (BOOTMGR is missing. Press Cntrl+alt+delete to restart). I searched a little bit and found that may be I need to install GRUB (boot loader). how do i install grub? using "fdisk -l" .. I found out that my bootable partition is C drive (NTFS /dev/sda1) while ubuntu is installed on another partition (ext3 /dev/sda3)!
View 7 Replies View RelatedI have just installed Lucid Lynx as after a live run of it I thought it was about time to upgrade. Everything ran smoothly in the live version so I backed up my files and installed it. When I went to boot I get this -
Grub loading, please wait ...
Error 2
The strange thing is it seems to be specific to the computer. I have an older, lower spaced desktop, computer that I tried the hard drive in and it worked fine. Problem is its too low spaced for what I want so it seems the install went ok but its something with the computer? How I would be able to boot into the install?
I have an old computer that I use for trying out software and other things before putting them on my newer machine so as to avoid irreparable damage. The machine has 2 hard discs; the first disc contains Windows and I wanted to use the second disc for Linux. I installed Fedora 14 on the second disc and followed this with Ubuntu 10.10.
After I installed Fedora I re-booted and had a choice between booting into Windows or Fedora. After adding Ubuntu I assumed that Grub2 would pick up both Windows and Fedora and add them to the grub menu but instead, the grub menu only contained the options to boot Fedora or Ubuntu. I tried running 'sudo update-grub' but got the following message:
"cannot access /var/lib/os-prober/mount/boot
Boot: No such file or directory"
When I had a look in /os-prober all that was there was a file called 'labels' and when I opened it it consisted of the one line "Fedora 1" It looks to me, who doesn't know a lot about grub2, that something is missing from grub and had wondered whether to re-install it or whether doing so would be jumping out of the frying pan into the fire.
i got a dual-boot. both are debian. yesterday i upgraded one of them to debian-squeeze and to grub2.that installations boots just fine.but for the second i get the error message from the thread title:"render error detected"after the grub-menu.if i choose single user mode it boots and hangs waiting for the root file system.i found this results at google (which i am not allowed to post yet) but i don't understand them.
View 8 Replies View RelatedI was trying to install ubuntu 9.10 as a dual boot system with windows and I recieved this error message: The Grub package failed to install into /target/. Without the Grub boot loader, the installed system will not boot
This Error comes up after 94% of the install. I also cannot seem to get the side by side install option to work (sometimes this option appears sometimes it does not) I am not sure but I beleive seome of the install files have been placed on the hard drive because I only get the option now to install on the hard drive and totally wipe clean or the emptiest hard drive. So how would I get the possible Ubuntu install off the Hard drive. I have used this CD to Install before it has no scratches therefore should work. Also If I have Win Xp on a Raid 0 will the Ubuntu 9.10 install ?
Today, I finished assembling my dream computer. I can boot it into the BIOS, and I checked that everything was working correctly through there. Anyway, I attempted to transfer the hard drive from this computer to that one. This computer is a Dell (blech) Optiplex GX280 with an Intel processor and integrated graphics. The new one has an AMD Phenom II processor with an ATI card and an ASRock motherboard (drastically different machines, I know...) When I try to boot, GRUB gives me an error message that says something like:
Code:
blah whatever cannot find /dev/disk/by-uuid/372de761-9577-48be-ba19-c6b2890cb229
Did I do something wrong installing the hard drive? Or is this a problem that is going to happen no matter how hard I try to make it not happen? If the second is true, will it help if I wipe the disk and reinstall Ubuntu on the new computer?
P.S. I know similar threads about transferring hard disks have been posted, but no thread has mentioned this error.
I'm trying to install Fedora for the first time on my Desktop. Unfortunately, upon restart once the installation is complete I get the following error:
Code:
This is from Fedora 12 x86_64 DVD. I presume that this obviously has to do with my disk selection during partitioning, during which I deselcted the two drives that I didn't want to be part of the install and left the one that I did selected. I also selected "use entire disk". The drive had copies of both Ubuntu and Windows 7 on it, which I expect were wiped out during install.
I know that the details are sparse...but that's all I did. I'm happy to go back into the installer to retreive any necessary information that may be needed/to reinstall.
Just delete a linux partition and now when i boot a message appears and says error: unknown filesystem grub rescue >
I have search on the net for this problem and i have understand it a little. But my situation is a bit different and because i don't want to format my hard disc i wanna try to fix it. So before a couple months i download ubuntu 9.10 and i installed it a month later. But my computer used to crash all the time and i couldnt use it. So i download the latest ubuntu 10.4 and install it while having windows xp and the old ubuntu 9.10(so i had windows xp, ubuntu 9.10 and ubuntu 10.4 partitions). Now i tried to delete the partition of ubuntu 9.10 from disc utility. so i have the message i wrote above when i boot. I dont wanna delete my windows xp and ubuntu 10.4. what should i do to stop this message from appearing.
I have a dual boot system with Windows 7 and Ubuntu 9.10. I booted into Ubuntu and started the process to upgrade to Ubuntu 10.04. When it was all finished, it restarted and attempted to boot into the GRUB load screen. However, I get this message:
GRUB loading.
error: no such disck
grub rescue>
Firstly, I'm ubuntu-naive so things may need to be explained painfully slowly. Secondly, I tried doing a search for similar problems but I had a hard time following the solutions so rather than just jump on another thread I figure i'd start a new one.I am trying to move on from XP and tried setting up 9.10. I did the LiveCD; followed the installtion prompts and installed, and restarted. Following restart I get the following;GRUB loading.error: no such diskgrub rescue>I've tried doing the boot info script lines but I keep getting "unknown command sudo" msgs.I can't get beyond this point.
View 3 Replies View RelatedI just replaced the HD in my computer with a larger one (1tb) and installed Ubuntu Lucid 64bit onto two partitions (100gb for / and the rest for /home). I rebooted and it loaded up fine. Did some stuff, had to restart (NVidia drivers) and it stopped at a GRUB rescue prompt, reporting the error "Error : Out of Disk". So I rebooted again and it worked no problem. But since then, every second bootup or so delivers this error, while other times it loads Ubuntu fine. I've tried running update-grub a few times and this always seems to work. But ultimately, the problem never goes away. I also had a look at this [URL] But it seems the advice given to change the 10_linux file must be only for an earlier version of GRUB2 as the file on my machine is very different.
EDIT: I've attached the output of a Boot Info Script that I got here: [URL]
Edit: This is somewhat inaccurate, please see post #16 on page 2 for my actual situation
I'm more than a little confused by this. A little while back I had to reinstall my machine because I had a hard disk failure and I replaced my primary drive.Everything went perfectly smoothly, but then a couple of weeks after that when I rebooted, it dumped my into the grub rescue console
Code:
error: out of disk.
grub rescue>
So, I found a solution to the problem on these forums, rebooted perfectly fine, and thought everything was fine. Until the next time I rebooted, when it happened again. And now, every single time I reboot, I get the same issue.I have to do the following, each and every time I want to reboot - and i'm at a loss to explain why grub is borking itself every time.Boot off a live cd.Open a konsole window
Code:
sudo su -
mount /dev/sda6 /mnt
mount /dev/sda1 /mnt/boot
mount --bind /dev /mnt/dev
[code]....
what I think will be a long post, but I want to include as much information as possible to get some help. I post my question here because it is mostly a boot issue and not strictly a server issue, although that is what I am trying to install. I bought a used server, motherboard has all IDE connectors for HD and cd/dvd. The board is am Asus cuv4x-d. It is a rather old board, introduced to market around Sept. 2000. The two IDE hard drives that came with the mobo have presented the problem as what I will describe for the SATA problem. I wanted to use my SATA-Hard Drive as my storage. I bought an SATA-to-IDE adapter. I installed the hardware and booted from the Ubuntu Server cd. Everything went fine and the installation smooth. When the initial reboot started, this is where the error comes. I get an error that says, Error: out of disk. The next line shows a grub rescue prompt. It appears that Grub can't be found. The motherboard has a Primary and Secondary IDE connection. I have tried connecting the adapter to both.
View 6 Replies View RelatedSo my hard drive crashed. (i was running Linux 10.4)so i put in another hard drive, installed Ubuntu 10.4, and on boot up i get that error. I've tried reinstalling it with the server edition. different hard drives. all I get is that message.
View 9 Replies View RelatedI installed Debian squeeze amd64 (using LVM with ext4 for /, /home, and ext2 for /boot). This is on a whole hdd on its own. Before I installed it, I have win7 on it. There is also another hdd with winxp. The dual boot loader is in the hdd. After I installed Debian, grub 1.98 was installed. After reboot, grub says "welcome", and after 10 seconds, it says "error: no such disk". It went on to display the menu with a choice of my debian and MS windows.
There does not seem to be any effect of this "error:no such disk". However, after I chose Debian to boot, gnome comes on, and I typed in the username and password. The screen goes blank for about 30 seconds before my desk top comes on.
I have 2 questions:
1. How do I fix my grub "error:no such disk" message?
2. Is there something wrong with a 30 seconds delay for the desktop to show after typing username and password, and if so, what can be done?
i get this error when i try to boot from harddrive:
grub loading error: no such disk grub rescue>_
Trying to do a new install of ubuntu 10.10 to my laptop. Installation and all works fine, but upon rebooting, after the bios screen i get:
Code:
error: out of disk.
grub rescue>
I tried using following some instructions i found after googling for the problem:
Code:
ls (displays the partitions and devices Grub can see)
set prefix=(hdX,Y)/boot/grub
[Code]...
but after the 5th step, i get another "error: out of disk" message. The odd thing is that I had an install of 10.10 on this laptop a month ago, and it worked fine. As a side note, I installed fedora 14 after this happened, which worked fine. Reinstalled ubuntu, and it was back to the same problem. I also tried installing with a kubuntu cd I had, to make sure it wasnt the install media, and had the same problem.
OS: Debian unstable 32bit, kernel 2.6.32-2, grub 1.98 from late january 2010 (only have working net-access from work now, so I am grabbing information from memory). EXT3 and EXT4 support is compiled into the kernel along with chipset/scsi/sata support (not as modules), and I have tested to boot ext3 with it before proceeding. Prereq: my old disk started to have too much S.M.A.R.T errors, so I bought another one, put in a USB cabinet, added swap and ext4 partition/filesystem to it, and copied over all data from the old system to the new that was mounted at /dest using the command "find ./ -xdev -print0 | cpio -paV0 /dest". Swiched disks, so I now have the ext4 disk sitting at /dev/sda (partitions: sda1 => ext4, sda2 => swap), and booted into rescue-mode from cdrom, using /dev/sda1 as root with a shell on. After doing this, I performed the following commands:
mount --bind /dev /dest/dev
chroot /dest
modified the /etc/default/grub to instruct the kernel to boot using ext4, ran grub-install --recheck /dev/sda
ran update-grub to modify /boot/grub/grub.cfg (which looks as it should) After doing this, grub finds my partition and mounts it. It however stalls with the message: "warning: unable to open an initial console" and does nothing after this point. I have no ramdisk, but my old kernel booted fine from ext3 (and still does if I copy it to a ext3 partition), and since the ext4 support is compiled into the kernel - should I really need a ramdisk?
My computer has become quite strange the last days, last week grub stopped working and just halted at the grub prompt.
I can manually start the system by writing
insmod /boot/grub/linux.mod
linux /vmlinuz root=/dev/sda1 ro
initrd /initrd.img
boot
[Code].....
Note:
The system is a Ubuntu 10.04 based system on a old HP laptop.
Related questions:
grub2 error: out of disk
