whenever i do anything as sudo i get GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL].. for information. (Details - 1: Could not send message to GConf daemon: Connection is closed)
View 2 RepliesI'm getting a strange error on Ubuntu 10.04 when starting firefox, see output:
Code:
Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL] for information. (Details - 1: Failed to get connection to session: /bin/dbus-launch terminated abnormally with the following error: EOF in dbus-launch reading address from bus daemon
[code]...
My version of Firefox I'm running is:
Code:
Mozilla Firefox 3.6.9, Copyright (c) 1998 - 2010
I developed a java application to organize the articles and notes for what I need for my work reports. The path appear in a jlist component and by clicking on I'd like the file opened. The application works fine in /home side.
In /root side I get this message error:
"GConf Error: Failed to contact configuration server; the most common cause is a missing or misconfigured D-Bus session bus daemon." I work in KDE (OpenSuse 11.4). Why I need a configuration tipically of GNOME?
I just installed ubuntu 10.10 x64 It worked okay for awhile, but now everytime I startup I get this error message:
GConf error: Failed to contact configuration server; the most common cause is a missing or misconfigured D-Bus session bus daemon. See http... (Details-1:Server ping error:IDLmg.org/CORBA/CoMM_FAILURE:1.0)
So my desktop is basically worthless (Can't vnc in, windows have no title bar, can't launch anything)
Anyone what this gksu error is about (it repeats it three times)
gksu-2.0.0-1.el5.rf.x86_64.rpm
# gksu ls
GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL] for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)
i been getting errors when trying to use zypper from the console. This happens in 2 pcs, and errors seem to be the same,One has 11.4 + gnome 2, standar installation (with gnome) from 11.4 DVD. The error i get whenever i run something like zypper install xxxyyy.rpm or zypper update is:
GLib-GIO:ERROR:gdbusconnection.c:2279:initable_init: assertion failed: (connection->initialization_error == NULL)
the other one, 11.4 with gnome 3 (clean install from live dvd):
GLib-GIO:ERROR:gdbusconnection.c:2279:initable_init: assertion failed: (connection->initialization_error == NULL)
GConf Error: Failed to contact configuration server; the most common cause is a missing or misconfigured D-Bus session bus daemon. See GConf configuration system for information. (Details - 1: Failed to get connection to session: The connection is closed)
I dont know if its related, but the one with gnome 3 constantly gives me (what i think is) a kernel panic when i shut down the system, it happens fast and the text on the screen is not "linear" but spread all over the screen, so i cant read the whole message, but it does say something about glib and corruption.This is actually the first time(s) ibe seen a kernel panic ever since i used ubuntu.
Attempting clean install of ubuntu 9.10 using Flash drive. received the above error message. Have been away for almost a year and have forgotten much of what I thought I had learned. I tried a second download, despite "no errors".
View 1 Replies View RelatedThis seems to have just started. I read a .pdf document with evince and I get a whole bunch of messages like the following.GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See URL... for information. (Details - 1: Server ping error:IDL:omg org/ CORBA/COMM_FAILURE:1.0)What does this mean? why is evince trying to contact a server when I just want to read a document?
View 1 Replies View RelatedI have just recently switched from Gnome to KDE in 11.2 since there was some sort of major KDE update that fixed the issues I had been having with KDE. Ever since, I have not been able to get miro to load. I try to run it and all I get is the bouncing logo, then nothing. When I try to run Miro in terminal, I get this:
solomon@linux-yz7i:~> miro
ERROR:dbus.proxies:Introspect error on :1.150:/org/participatoryculture/dtv/OneTime: dbus.etop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote applicge bus security policy blocked the reply, the reply timeout expired, or the network connect
PyNotify support disabled on your platform.
And it will sit there for eternity or until I close the terminal window. When I run Miro as root, I get this:
linux-yz7i:/home/solomon # miro
Traceback (most recent call last):
File "/usr/bin/miro.real", line 48, in <module>
upgrade.upgrade()
File "/usr/lib/python2.6/site-packages/miro/plat/upgrade.py", line 77, in upgrade
if client.dir_exists("/apps/democracy/player") and not client.dir_exists("/apps/miro"):
glib.GError: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See GConf configuration system for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)
How will configure ntpd server? I tried to do it but I am used to get synchronize failed error.
View 2 Replies View RelatedI'm using FC12 with kde and cannot update the system time using the gui. The error is :Error unable to contact time server. How do i get it to work for the rest of the family who do not want to mess aboutcli mode?This does work from the terminal:ntpdate -u ntp.exnet.com so client software is present and correct leaving me at a loss.
View 4 Replies View Relatedi have configured ldapserver on rhel4 for creating address book
following are configuration files on ldap server
/etc/openldap/slapd.conf
include /etc/openldap/schema/core.schema
include /etc/openldap/schema/cosine.schema
include /etc/openldap/schema/inetorgperson.schema
include /etc/openldap/schema/nis.schema
i am able to import this ldif file into database.also when i perform the ldapsearch on this server with command"ldapsearch �x �W �D �cn=manager, dc=example, dc =com� �b �dc=example, dc=com�" i get correct output.
but when i am trying to search from another client machine, i am getting "error ldap_sasl_bind(SIMPLE): Can't contact LDAP server (-1)"
also when i configured address book on mozilla on server., it is working fine.but not working on another machine.is any configuration is missing on client machine.both ldap server and client are configured on rhel4es without any firewall or selinux.
I am currently trying to upgrade over 100 rpms on multiple Red Hat servers. Whenever I try to do a rpm -u /packages/*.rpm i recieve a failed dependencies error on the very first rpm. I know that I can go though each rpm one by one and trace each dependency but that will take forever. Is there a way to skip these errors? I know the -nodeps command for rpm but I dont want to screw something up but running all of these rpms on -nodeps
View 10 Replies View RelatedInstalling file sharing using eBox and get the following error:
[Code]///
OS:Debian Linux 2.6.32-5-amd64 Should i need to worry about these error messages? If 'Yes', how to check and fix? When it boot,
/var/log/syslog
Mar 2 23:29:03 ipb167 kernel: [ 1.465629] PM: Error -22 checking image file
Mar 2 23:29:03 ipb167 kernel: [ 4.110123] amd64_edac: probe of 0000:00:18.2 failed
[code]....
I have a server that I can only access via SSH (it's located far away) and I would like to secure it by blocking all ports except the ones that I need (which are HTTP and SSH). I still want to be able to make outgoing connections to enable software updates and other things.This is my iptables -L -n :
Code:
Chain INPUT (policy ACCEPT)
target prot opt source destination
ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
DROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpts:1:21
DROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpts:23:79
DROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpts:81:65535
code....
In my opinion, this should block all incoming packets except the ones on port 80 and 22, but allow responses to outgoing connections. But a wget http://google.com does not work, it can't establish the connection.
Maybe this is not the best style for iptables rules, but I want to be absolutely sure to not accidently lock myself out from SSH, so I chose not to configure a "block-everything rule".
Does this configuration not enable incoming packets from connections initiated from inside?
i am trying to install symantec endpoint on a linux server by this command rpm -ivh sav-1.0.3-8.i386.rpm but it gives me the following error error: unpacking of archive failed on file /opt/Symantec/bin/navdefutil;4ceb8d6b: cpio: mkdir failed - No such file or directory
View 3 Replies View Relatedwhen I try to update my Debian, I have the following internal error:Error message:Fetch failed: W:Failed to fetch [URL] Unable to find expected entry free/binary-i386/Packages in Meta-index file (malformed Release file?), W:Failed to fetch [URL] Unable to find expected entry free/binary-i386/Packages in Meta-index file (malformed Release file?)
, W:Failed to fetch [URL] Unable to find expected entry free/binary-i386/Packages in Meta-index file (malformed Release file?), E:Some index files failed to download, they have been ignored, or old ones used instead.
Installing Oracle iPlanet Web Server
Installation Summary
Product Status Information
1. Oracle iPlanet Web Server Configuration Failed View log file
1. View log file
2. Done
When the RPM runs it come up with this error. How do I install the required dependencies? I have added more repositories, but still there are a few dependencies missing. Is there a zypper/sudo -get or something available? Opensuse 11.1 Gnome
[code]...
I am getting these error in RHEL 5.3 while i did "yum update".
---> Package libstdc++-devel.i386 0:4.1.2-46.el5_4.2 set to be updated
---> Package libstdc++-devel.x86_64 0:4.1.2-46.el5_4.2 set to be updated
---> Package libstdc++44-devel.i386 0:4.4.0-6.el5 set to be updated
[code]....
The program package-cleanup is found in the yum-utils package.
When I am trying to run the Xserver using the command startx I am getting the below mentioned error
xauth: creating new authority file /oracle/oracle10g/.serverauth.22555
Fatal server error:PAM authentication failed, cannot start X server. Perhaps you do not have console ownership?
[code]....
I tried to install php from source file on centos server and i got the error as # ./configure --with-apxs2=/usr/local/packages/apache/bin/apxs --with-mysql --prefix=/usr/local/packages/apache/php --enable-force-cgi-redirect --disable-cgi --with-zlib --with-gettext --with-gdbm
checking for specified location of the MySQL UNIX socket... no checking for MySQL UNIX socket location... /var/lib/mysql/mysql.sock checking for mysql_close in -lmysqlclient... no checking for mysql_error in -lmysqlclient... no configure: error: mysql configure failed. Please check config.log for more information.
I just run Php5handler on suphp, but suddenly i got internal server error (everything ok when i running php5handler on dso) How to fix this problem?
View 1 Replies View RelatedI have installed openldap on debian lenny as said here [URL]clients" for both ldap server and ldap client on 192.168.1.192. Now I can make normal ldap successfully but I would like to do secure ldap and replication ldap too. "ldap_sasl_bind(SIMPLE): Can't contact LDAP server (-1)" here is the error I got stuck with when I follow this link for replication and ssl/tls part[URL]Then I google to find solution and then try these commands
debian:/etc/ldap# ldapsearch -H ldap://192.168.1.192 -b dc=webon -x -d-1
ldap_url_parse_ext(ldap://192.168.1.192)
ldap_create
[code]....
Just installed openldap server on a VM CentOS called 'ldapsrv', it works fine, ldapsearch returns all ldap information.
Installed openldap client on another VM CentOS called 'ldapclient1', configured it with most basic configuration, no ssl/tls etc. but ldapsearch returns error:
ldapsrv is pingable:
Some outputs:
PHP Code:
PHP Code:
I am behind a funny firewall, so that may have something to do with this, but since the problem materialized upon update to F14, I am assuming that this has something to do with it as well. (Both connections are on the internal network, so should not invoke the firewall/proxy, so the firewall issue is probably a red herring.)Since the update, neither evolution-mapi nor evolution-exchange (over OWA) are able to access my email. Here is the error given when using evolution-mapi:
Code:
Unable to authenticate to Exchange MAPI server: file exchange-mapi-connection.c: line 359 (exchange_mapi_connection_new): assertion `profile != NULL' failed Please enter the MAPI
[code]....
I have configure the virtual mail server both in vexim and postfix .But when i tried to configure the email client on thunderbird and evolution i get login failed error.I am using courier imap for pop3 and imap authentication.
View 1 Replies View RelatedUbuntu has been very good for us, fast, small foot print, But just yesterday it decided not to boot up. It gets to the login screen, and shows a warning... "Install problem, the Gnome power management configuration installed incorrectly, contact your administrator" What can I do to free this up?
View 1 Replies View Relatedduring an "apt-get install" the filesystem of a virtual machine filled up and so it failed. I have now increased the file-system size but running the same "apt-get install" again results in this error: "E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem." However when I try to run 'sudo dpkg --configure -a' I get this error: "dpkg: failed to write status database record about 'libxmuu1' to '/var/lob/dpkg/status': No space left on device" How can I recover from this situation?
View 1 Replies View Related