General :: NTPD Server Configuration - Synchronize Failed Error
Mar 15, 2010How will configure ntpd server? I tried to do it but I am used to get synchronize failed error.
View 2 Replies
ADVERTISEMENT
General :: Synchronize The Time Of VM Server With Ntpd?
Mar 22, 2010I am trying to synchronize the time of my VM server with ntpd. I have the following configuration. And in the /etc/ntp.conf, I have the following line:
restrict default ignore
restrict 127.0.0.1.
server time1.server
server time2.server
Whenever I have this line, the erver is not able to synchronize its time... So far as I understood, this line prevents other servers using this machine as a time server. And the second line says to allow localhost to use as time server. But why do I need to use its own time server when I have specified to use time1.server and time2.server ? ( firewall for tcp and udp ports 123 is open)
However, when I replace the first line of the configuration with the following line, it works. restrict default kod nomodify notrap noquery But with this, i am allowing other servers to use this server a ntp (which I wouldn't like to). Why this machine tries to use ntp server of its own (to snyc time) and why it is not working though i have the entry "restrict 127.0.0.1" ??
Red Hat / Fedora :: NTP In Virtual Server - Error; # /etc/init.d/ntpd Status Ntpd Dead
Apr 1, 2010I am facing issue in ntp, it is getting killed frequently. see below error; # /etc/init.d/ntpd status ntpd dead but pid file exists After starting service it is works fine but again after sometimes it get in dead postition.
View 5 Replies View RelatedCentOS 5 :: Starting Ntpd: Ntpd: Error While Loading Shared Libraries: Libm.so.6
Mar 30, 2011[root@espeed log]# /etc/init.d/ntpd start
Starting ntpd: ntpd: error while loading shared libraries: libm.so.6: cannot open shared object file: No such file or directory
[root@espeed log]# ldd /usr/sbin/ntpd
linux-gate.so.1 => (0x00786000)
libm.so.6 => /lib/libm.so.6 (0x0059d000)
[code]....
Ubuntu :: Error - Failed To Contact Configuration Server
Mar 31, 2011I'm getting a strange error on Ubuntu 10.04 when starting firefox, see output:
Code:
Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL] for information. (Details - 1: Failed to get connection to session: /bin/dbus-launch terminated abnormally with the following error: EOF in dbus-launch reading address from bus daemon
[code]...
My version of Firefox I'm running is:
Code:
Mozilla Firefox 3.6.9, Copyright (c) 1998 - 2010
OpenSUSE :: GConf Error: Failed To Contact Configuration Server
Jul 26, 2011I developed a java application to organize the articles and notes for what I need for my work reports. The path appear in a jlist component and by clicking on I'd like the file opened. The application works fine in /home side.
In /root side I get this message error:
"GConf Error: Failed to contact configuration server; the most common cause is a missing or misconfigured D-Bus session bus daemon." I work in KDE (OpenSuse 11.4). Why I need a configuration tipically of GNOME?
Ubuntu :: Error: Failed To Contact Configuration Server; Some Possible Causes Are That You Need To Enable
Mar 13, 2010whenever i do anything as sudo i get GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL].. for information. (Details - 1: Could not send message to GConf daemon: Connection is closed)
View 2 Replies View RelatedFedora :: Gksu - GConf Error: Failed To Contact Configuration Server
Apr 3, 2010Anyone what this gksu error is about (it repeats it three times)
gksu-2.0.0-1.el5.rf.x86_64.rpm
# gksu ls
GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL] for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)
Ubuntu :: Error: Failed To Contact Configuration Server; The Most Common Cause Is A Missing Or Misconfigured
Nov 24, 2010I just installed ubuntu 10.10 x64 It worked okay for awhile, but now everytime I startup I get this error message:
GConf error: Failed to contact configuration server; the most common cause is a missing or misconfigured D-Bus session bus daemon. See http... (Details-1:Server ping error:IDLmg.org/CORBA/CoMM_FAILURE:1.0)
So my desktop is basically worthless (Can't vnc in, windows have no title bar, can't launch anything)
OpenSUSE :: Errors Trying To Use Zypper (from Console) - GConf Error: Failed To Contact Configuration Server
Jun 30, 2011i been getting errors when trying to use zypper from the console. This happens in 2 pcs, and errors seem to be the same,One has 11.4 + gnome 2, standar installation (with gnome) from 11.4 DVD. The error i get whenever i run something like zypper install xxxyyy.rpm or zypper update is:
GLib-GIO:ERROR:gdbusconnection.c:2279:initable_init: assertion failed: (connection->initialization_error == NULL)
the other one, 11.4 with gnome 3 (clean install from live dvd):
GLib-GIO:ERROR:gdbusconnection.c:2279:initable_init: assertion failed: (connection->initialization_error == NULL)
GConf Error: Failed to contact configuration server; the most common cause is a missing or misconfigured D-Bus session bus daemon. See GConf configuration system for information. (Details - 1: Failed to get connection to session: The connection is closed)
I dont know if its related, but the one with gnome 3 constantly gives me (what i think is) a kernel panic when i shut down the system, it happens fast and the text on the screen is not "linear" but spread all over the screen, so i cant read the whole message, but it does say something about glib and corruption.This is actually the first time(s) ibe seen a kernel panic ever since i used ubuntu.
Ubuntu Installation :: Error: "Failed To Contact Configuration Server"
Mar 9, 2010Attempting clean install of ubuntu 9.10 using Flash drive. received the above error message. Have been away for almost a year and have forgotten much of what I thought I had learned. I tried a second download, despite "no errors".
View 1 Replies View RelatedGeneral :: Setup Server To Automatically Synchronize Its Server Clocks?
Oct 5, 2009How can I setup my Linux server to automatically synchronize its server clocks? We need to ensure our server clocks are set to the correct time always.
View 2 Replies View RelatedGeneral :: Synchronize Files With Ftp Server?
Jan 30, 2011what is the best way to synchronize files with ftp server
and I wnat to do this automaticlly
General :: Fatal Server Error:PAM Authentication Failed, Cannot Start X Server
Jun 29, 2011When I am trying to run the Xserver using the command startx I am getting the below mentioned error
xauth: creating new authority file /oracle/oracle10g/.serverauth.22555
Fatal server error:PAM authentication failed, cannot start X server. Perhaps you do not have console ownership?
[code]....
General :: Error: Failed To Start The X Server
Aug 13, 2010I have SUSE Linux Enterprise Desktop 10 running on HP Mini 2133. It's been working like a dream since I got it, but one day I got the following error message when booting it: Failed to start the X server (your graphical interface). It is likely that it is not set up correctly. Would you like to view the X server output to diagnose problem? <Yes> <No>.
X server output says alot of things, but I think this is the most important:
(==)Using config file: "/etc/X11/xorg.conf"
ACPI: OSPMOpen Called
ACPI: Opening device
(EE) VIA(0): No valid modes found
I then get the login:. I'm able to login, but I have no clue on what to do. How can I fix this?
General :: Error - Failed To Start X Server (RedHat 5.3)
Mar 7, 2010I installed Red-hat 5.3. Problem is that it is not showing graphical interface. Only kernel / command prompt is available. I tried startx, then I got this msg. No video BIOS modes for chosen depth. Also showing that:
ERROR: Failed to start X server.
Ubuntu Servers :: Clients Can't Use The Email From The Outside - Configuration / Synchronize?
Mar 22, 2011I have one local mail server hosted in Mdaemon in my office and ip is 192.168.10.2. My clients can't use the email from the outside. If they want to use the mail, they need to come to office. I want them to use from the outside. How can i set up the mail server. Do i need to host the server on the hosting? I want to synchronize with my local mail server. I don't have the public IP BTW.
View 2 Replies View RelatedServer :: Skipping Failed Dependencies Error / Rpm -u /packages Recieve A Failed Dependencies Error?
Nov 2, 2010I am currently trying to upgrade over 100 rpms on multiple Red Hat servers. Whenever I try to do a rpm -u /packages/*.rpm i recieve a failed dependencies error on the very first rpm. I know that I can go though each rpm one by one and trace each dependency but that will take forever. Is there a way to skip these errors? I know the -nodeps command for rpm but I dont want to screw something up but running all of these rpms on -nodeps
View 10 Replies View RelatedFedora Security :: NTPD Error Report At Startup Of Machine
Jan 25, 2011I've been trying to make sense out of this error report. I get it every once in a while on startup of my machine.
Code:
Summary:
SELinux is preventing /usr/sbin/ntpd access to a leaked netlink_route_socket
file descriptor.
Detailed Description:
[ntpd has a permissive type (ntpd_t). This access was not denied.]
SELinux denied access requested by the ntpd command. It looks like this is either a leaked descriptor or ntpd output was redirected to a file it is not allowed to access. Leaks usually can be ignored since SELinux is just closing the leak and reporting the error. The application does not use the descriptor, so it will run properly. If this is a redirection, you will not get output in the netlink_route_socket. You should generate a bugzilla on selinux-policy, and it will get routed to the appropriate package. You can safely ignore this avc.
Allowing Access:
You can generate a local policy module to allow this access - see FAQ [URL]
Additional Information:
Source Context system_u:system_r:ntpd_t:s0
Target Context system_u:system_r:firstboot_t:s0
Target Objects netlink_route_socket [ netlink_route_socket ]
Source ntpd
Source Path /usr/sbin/ntpd
Port <Unknown>
Host localhost.localdomain
Source RPM Packages ntp-4.2.6p2-7.fc14
Target RPM Packages
Policy RPM selinux-policy-3.9.7-3.fc14
Selinux Enabled True
Policy Type targeted
Enforcing Mode Enforcing
Plugin Name leaks
Host Name localhost.localdomain
Platform Linux localhost.localdomain 2.6.35.6-45.fc14.i686
#1 SMP Mon Oct 18 23:56:17 UTC 2010 i686 i686
Alert Count 1
First Seen Fri 21 Jan 2011 02:01:09 AM PST
Last Seen Fri 21 Jan 2011 02:01:09 AM PST
Local ID fb73799a-8d3c-4d9a-8c06-a0c1b6d4814e
Line Numbers
Raw Audit Messages
node=localhost.localdomain type=AVC msg=audit(1295604069.730:15): avc: denied { read write } for pid=1731 comm="ntpd" path="socket:[14643]" dev=sockfs ino=14643 scontext=system_u:system_r:ntpd_t:s0 tcontext=system_u:system_r:firstboot_t:s0 tclass=netlink_route_socket
node=localhost.localdomain type=SYSCALL msg=audit(1295604069.730:15): arch=40000003 syscall=11 success=yes exit=0 a0=8a1ad60 a1=8a1b040 a2=8a1b2c8 a3=8a1b040 items=0 ppid=1730 pid=1731 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ntpd" exe="/usr/sbin/ntpd" subj=system_u:system_r:ntpd_t:s0 key=(null)
Debian Configuration :: Amd64_edac: Probe Of 0000:00:18.2 Failed With Error -22
Mar 2, 2011OS:Debian Linux 2.6.32-5-amd64 Should i need to worry about these error messages? If 'Yes', how to check and fix? When it boot,
/var/log/syslog
Mar 2 23:29:03 ipb167 kernel: [ 1.465629] PM: Error -22 checking image file
Mar 2 23:29:03 ipb167 kernel: [ 4.110123] amd64_edac: probe of 0000:00:18.2 failed
[code]....
Server :: NTPD Giving Non Local Time - How To Set
Feb 10, 2011NTPD on Fedora 14.
View 2 Replies View RelatedServer :: Install Symantec Endpoint - Error: Unpacking Of Archive Failed On File - Cpio: Mkdir Failed - No Such File Or Directory
Nov 23, 2010i am trying to install symantec endpoint on a linux server by this command rpm -ivh sav-1.0.3-8.i386.rpm but it gives me the following error error: unpacking of archive failed on file /opt/Symantec/bin/navdefutil;4ceb8d6b: cpio: mkdir failed - No such file or directory
View 3 Replies View RelatedDebian Configuration :: [squeeze] Update Manager Internal Error Fetch Failed
May 18, 2011when I try to update my Debian, I have the following internal error:Error message:Fetch failed: W:Failed to fetch [URL] Unable to find expected entry free/binary-i386/Packages in Meta-index file (malformed Release file?), W:Failed to fetch [URL] Unable to find expected entry free/binary-i386/Packages in Meta-index file (malformed Release file?)
, W:Failed to fetch [URL] Unable to find expected entry free/binary-i386/Packages in Meta-index file (malformed Release file?), E:Some index files failed to download, they have been ignored, or old ones used instead.
Fedora :: Failed To Contact Configuration Server
Mar 15, 2010This seems to have just started. I read a .pdf document with evince and I get a whole bunch of messages like the following.GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See URL... for information. (Details - 1: Server ping error:IDL:omg org/ CORBA/COMM_FAILURE:1.0)What does this mean? why is evince trying to contact a server when I just want to read a document?
View 1 Replies View RelatedNetworking :: NTPD - No Server Suitable For Synchronization Found
Mar 29, 2011I am having a situation with an NTPD server.
Code:
remote refid st t when poll reach delay offset jitter
plesk2.datacent .INIT. 16 u - 64 0 0.000 0.000 0.000
91.198.87.118.b .INIT. 16 u - 64 0 0.000 0.000 0.000
core.fr.zeroloo .INIT. 16 u - 64 0 0.000 0.000 0.000
178-26-105-100- .INIT. 16 u - 64 0 0.000 0.000 0.000
and it remains so no matter how long I wait...
Hoping to get better results with ntpdate, I stopped NTPS and tried :
Code:
# ntpdate ntp.skynet.be
29 Mar 09:12:26 ntpdate[4715]: no server suitable for synchronization found
# ntpdate -ud ntp.skynet.be
29 Mar 09:14:02 ntpdate[4814]: ntpdate 4.2.4p4@1.1520-o Sun Nov 22 16:14:35 UTC 2009 (1)
transmit(195.13.23.5)
receive(195.13.23.5) .....
I am running Debian Lenny 64b, and every packages are totally updated. I have 25 identical servers. And there is just one giving me this problem. From what I see, it is not a connection/FW issue since ntpdate get replies from the ntp server (ntp.skynet.be is my isp's stratum 2 ntp server).
CentOS 5 Server :: Ntpd Startup Fails During Boot
Sep 1, 2010ntpd startup fails during boot.Does startup just fine manually from command line once it's booted though. Any suggestions what I might adjust?
View 2 Replies View RelatedSoftware :: Oracle IPlanet Web Server 7 - Configuration Failed
Jul 5, 2011Installing Oracle iPlanet Web Server
Installation Summary
Product Status Information
1. Oracle iPlanet Web Server Configuration Failed View log file
1. View log file
2. Done
Ubuntu Servers :: Setting A Ntpd Server To Allow Peers To Sync?
Jun 6, 2010What configuration options in /etc/ntp.conf do I have to set to allow other computers to receive time from a ntpd server? I've tried removing "nopeers" and "noquery" from the restrict lines, but I can't see anything on port 123.
View 2 Replies View RelatedSoftware :: CentOS 5.3 VM With Ntpd, No Server Suitable For Synchronization Found?
Jan 8, 2010I cant get ntpd to synchronize with the ntp servers. I have a CentOS 5.3 32 bit Virtual Machine. I'm in USA on Pacific Standard Time. Here's all configuration and other important information for troubleshooting. Is there anything wrong with my config? btw, I used wireshark to look at the UDP packets - I dont get any responses from any of the servers back. I only see requests going out from my server, but no response. Is this a firewall Issue? If it is, then do I need to just enable UDP port 123 on the firewall?
[Code]...
OpenSUSE :: Subprocess Failed - Error: RPM Failed: Error: Failed Dependencies
Mar 31, 2010When the RPM runs it come up with this error. How do I install the required dependencies? I have added more repositories, but still there are a few dependencies missing. Is there a zypper/sudo -get or something available? Opensuse 11.1 Gnome
[code]...
