CentOS 5 :: Internal Server Error When Enable Suphp?
Sep 15, 2011I just run Php5handler on suphp, but suddenly i got internal server error (everything ok when i running php5handler on dso) How to fix this problem?
View 1 RepliesI just run Php5handler on suphp, but suddenly i got internal server error (everything ok when i running php5handler on dso) How to fix this problem?
View 1 RepliesI did a fresh installation of centos 5.5. I installed KVM. And configured a eth1 for KVM host network and i configured eth0 to be bridged.
When i do service libvirtd reload i get: internal error Bridge generation exceeded max id 256
I have builded a svn server using apache before. But recently I can not check out from the svn server,and error code is as follows:
svn: Can't find a temporary directory: Internal error
I have searched in the google,they said no space on the server.But my server have much space.
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 49G 22G 24G 48% /
tmpfs 220M 0 220M 0% /dev/shm
/dev/sdb1 917G 867G 3.8G 100% /mnt/md0
/dev/hda1 151G 129G 15G 91% /mnt/meego
The server is at the /dev/hda1 partition.
I am new to CentOS and need this urgent help.
On my machine, I am not able to login using any of the user account or root. It's showing this message:
Then comes another message:
YOur session lasted for less than 10 seconds. Try logging using Failsfe.
....
session_child_run: Could not exec /etc/X11/xinit/Xsession default
I tried to use the failsafe as well, but nothing seems to work.
Would someone please help me regarding this issue?
I use web server apache use php fastcgi (Centos 5.2, apache 2.2.9 , php 5.2.5 and fcgi-2.2.4 ). I receive error : "The server encountered an internal error or misconfiguration and was unable to complete your request. contact the server administrator, no-reply@zz.vn and inform them of the time the error occurred, and anything you might have done that may have caused the error. I view log :
[code]...
I installed debian 7 and apache 2.2 with virtualhosts. I'd like to run CGI, but always get internal server error. i tested it with a simple test.cgi file.I got this in apache error log.Wed Sep 30 21:39:02 2015] [error] [client 192.168.0.156] Premature end of script headers: test.cgi
When is switch off "Addhandler cgi-script .cgi" in the config file i see the code. Permissions are 755 on the whole directory. I have checked a2enmod, the modul is loaded (sudo a2enmod cgi)..here are the part of config files :
ScriptAlias /gestioip "/var/www/gestioip"
<Directory "/var/www/gestioip">
AddHandler cgi-script .cgi
AddDefaultCharset utf8
[code]...
I'd like to have anything that tries to send mail locally on my machine (including crontab reports for instance) to be handled by my ISP's smtp server instead of my machine acting like it's own SMTP server. I've spent around 15 hours trying to figure out how to do this and I keep either getting into things that I don't understand, or hitting brick walls (for instance, I found nullmailer, but after installing it, it seemed like it would only work on Unix) Is there an application like nullmailer which I can use as my MTA to forward all internal mail to a different SMTP?
View 3 Replies View Relatedi'm facing an error 500 internal error and i don't know where to start .... How can i get information about the error in order to fix it ???at /var/log/apache2/error.log i can't find anythingi have virtualmin installed , i searched at/var/log/virtualmin/domainname_error_log but nothing .... where is apache supposed to keep log for 500 errors ?
View 1 Replies View RelatedMy httpd error_log says the following error while running the htpasswd.pl
[Thu Jun 24 08:25:54 2010] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)
[Thu Jun 24 08:25:54 2010] [notice] Digest: generating secret for digest authentication ...
[Thu Jun 24 08:25:54 2010] [notice] Digest: done
[Thu Jun 24 08:25:54 2010] [notice] Apache/2.2.3 (CentOS) configured -- resuming normal operations
[Thu Jun 24 08:26:01 2010] [error] [client 117.204.119.181] (2)No such file or directory: exec of '/var/www/cgi-bin/htpasswd.pl' failed
[Thu Jun 24 08:26:01 2010] [error] [client 117.204.119.181] Premature end of script headers: htpasswd.pl
Also the apache shows this error in the webpage. Internal Server Error. The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, root@localhost and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log.
Apache/2.2.3 (CentOS) Server at 59.93.43.183 Port 8284
I am using the htpasswd.pl script dwoloaded from net. I can run the perl file using the command line and gets the sytax OK message. The contents of te htpasswd file is as follows:
#! /usr/local/bin/perl -T
# htpasswd.cgi by David Efflandt (efflandt@xnet.com) 8/97
# Last update 10/4/99
# Update password file from the web for use with user authentication.
# Stores each line in the format: username:crypted_password .....
i am forwarding HTTP request to a internal server, it is quiet successful but access logs donot show the ip of the external m/c. Rather it shows the ip of the machine on which i have enabled port forwarding.
View 2 Replies View RelatedI have a white slate centos 5.5 installation on a virtual box at Media Temple (one of their new VE servers). I am trying to create a development environment where I can have Bind9 serve up one set of zone files to me and other developers on the internal network and another set of zone files to external requests (ie... using the views feature). I would like to be able to develop for sites for which the dns is not yet pointed at my server. The network is created by having the VE server be an OpenVPN server, and connecting my client box to the server (my mac - 10.8.0.6 / my ve server 10.8.0.1).
I have the connections working fine, I have also been able to route all network traffic from my mac through the vpn to the server. For some reason, I cannot get the DNS server on the ve server to serve me an internal view zone file. When my vpn is on, I cannot ping or navigate to any web pages from my mac. I think this is because my ve server is not setup as a dhcp server and the ip tables are not setup to allow all internal requests to use the server to go get web pages.
I cannot view-ping anything else from my mac/client when on the vpn, I can successfully ping any website my ve is authoritative for. This tells me that my ping is obviously going over the vpn, and thus an internal request, but the external zone file is still served up. The following is my named config.
acl "lan_hosts" {
10.8.0.0/24;
127.0.0.1;
};
[code]....
I have a VPS server with 512 MB memory. The php.ini is set so script memory limit = 16 MB. However, I have noticed in my top report, instances like the following:
Quote:
5484 coldclim 25 0 46476 32m 5920 R 0.0 6.4 0:00.93 php
The bold number of 6.4 is the % of sever memory this process is using. 6.4 % of 512 MB of memory is about 32 MB of memory, so it appears that this isn't being limited by php.ini. Am I correct? This leads to the next question: Is there some way to limit the amount of memory a single suphp process can use? (Basically, something like the setting in php.ini which limits suphp processes in the same way.)
I want write a 2-way chat application in the my website, and i have to use the juggernaut plugin. but a recieved an error that " internal server error"
View 1 Replies View RelatedWe're having an issue with HTTP POST file uploads on our two Ubuntu PCs. For some reason, whenever one of our users attempts to submit a file in an HTML form, the request times out, usually with a 500 Internal Server Error message. This problem is not limited to one site, but occurs on all sites that use file uploads. Also, the problem does not appear to be with our network, as a Windows 7 PC on the same network can upload files to the same sites without any difficulties. The problem is not browser-specific; we have tested with Firefox, Epiphany, and Google Chrome and all produce the same results. The issue is relatively new, and was first observed within the last month; before this time, both machines had no problems uploading files.
Does anyone have ANY idea what could be causing this? I've tried a number of things, including rebooting the PCs, rebooting the network, disabling IPv6, etc. I'm not very experienced in Linux system administration, but I can use the terminal and am familiar with some terminal-based diagnostic tools, so if you need any additional info or want me to try something, please let me know! I've exhausted my own computer knowledge with regards to finding a solution to this problem.
I want to enable quota on my centos 5.5, I've tried and it showed correctly quotacheck but when i rebooted the machine it showed me an error saying that fsck.ext3: no such file or direcotory while trying to open /dev/VolGroup00/LogVol00 below are my fdisk and fstab file. how can I enable quota based on below configuration. otherwise may be I have to reformat the machine..n it'll be really painfull for me.
[root@drikdhaka ~]# fdisk -l
Disk /dev/hda: 82.3 GB, 82348277760 bytes
255 heads, 63 sectors/track, 10011 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
explain to me how to get sound through the internal speaker of my computer. Everything else works fine. IE, if I plug in a headset or boxes, they work fine.
View 4 Replies View Relatedi'm running httpd 2.2.3-31 on a full update centos 5.4 , i need to enable mod_charset_lite on apache, how can do that?
View 3 Replies View RelatedI've got a final revision of the G4 Mac mini, the 1.5GHz model, dual booting 10.04 LTS and OS X. One of the issues I've had is that the internal speaker doesn't work under Linux, or so it's been reported on various post and sites. It turns out it's a simple matter of flipping some ALSA control options. With an ALSA mixer you must enable both the Speaker and the Headphone to get audio to play over the internal speaker. It will still play over the external headphones/speakers if they are still plugged in. I'm not sure if this is a problem with the ALSA, OSS, PCM or snd_powermac drivers or just something setup wonky in the configs. I've used both GNOME ALSA Mixer GUI and the alsamixer command line tool to do this. The alsamixer tool will mostly work in an X-term, as the F-keys don't pass though. It is fully functional on a console login. I also noticed that audio plays back per-user. When I switch from X to a console he sound is cut off, and when I get logged in as the same user the audio comes right back in.
View 1 Replies View RelatedDisable internal wireless card & enable external? Can I do this really by network-manager or should I use some other program. If I plug-in external both are connected. If I disable internal by laptop button, I cannot enable wireless anymore in nm-applett (external on).
View 7 Replies View Relatedwhenever i do anything as sudo i get GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL].. for information. (Details - 1: Could not send message to GConf daemon: Connection is closed)
View 2 Replies View RelatedI am having a problem with bringing up a two node cluster.
It picks up a cluster configuration file from another cluster on the network where of course it does not find the local node
I've disabled openais, change the configuration to use a different ring but it is still happening.
I get the following error message code...
Is there a way to boost the logging for cman and openais so I can get more clues as to why it it is happening? I've only seen postings telling how to do it for resource manager .
I have a problem with compiling of mod_ruby-1.3.0 After a succesfull configure i get a error in the make, it say "make: *** [apachelib.o] error 1" . Here below you can find the results of de configuring and the make.I was following the roles in Howtoforge " The perfect server - Centos 5.3" everything goes perfect till mod_ruby-1.3.0
./configure.rb --with-apr-includes=/usr/include/apr-1
checking for a BSD compatible install... /usr/bin/install -c
checking whether we are using gcc... yes
[code]....
I am experiencing trouble configuring suPHP on my Ubuntu 8.04 web server. I've googled around quite a bit and the general consensus is that you first disable php5, then install the suphp module (I did that from the repo). I configured one of my Vhosts to use suPHP_UserGroup, but I get the following error:
Invalid command 'suPHP_UserGroup', perhaps misspelled or defined by a module not included in the server configuration
I know the module is loaded, so I'm not sure why I'm getting this error. Is a Vhost the right place for this setting? Note that I installed from the repository instead of compiling from source if that makes any difference. Any insight on this issue? I can provide configuration files if need be.
Edit: After some extended googling, from what I understand I have to recompile suPHP using the 'paranoid' mode. Am I correct?
I am setting a Lucid mail server, and got dspam and mailgraph installed. dspam requires suexec module for apache, but it breaks mailgraph with "500 Internal Server Error":
[Code].....
I've installed suPHP on my ubuntu server, only thing is, there's no examples of php code that I could find that shows how to do a root command (e.g. su useradd ... ) I've been on this for 3 days and it's hurting my head
View 2 Replies View RelatedI am installing a cluster which is hidden from the rest of the world and there is no router either froma general login node. I would therefore require a local repository of the updates to CentOS5.4. When I checked I only found instructions for a full mirror. As I have no room and neither the human resources to setup and maintain a full-blown mirror, this is not a solution. However if I try to find updates for 5.4 to download in a repository-type of way I fail to find a solution. Maybe I am just not looking in the right places.
View 1 Replies View Relatedi am currently trying to install vsFTP onto my new linux server and btw i just started using linux today this is my first time using linux so i got the ftp installed good it got downloaded and everything then i went to open a port for my server for vsFTP i used this comand to open it "-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 21 -j ACCEPT" then i closed it by pressing ESC then :wq! and it brought me back to my comand line again so now when i try to start the ip table thing with the comand "service iptables start" then when i execute that comand putty respondes with this "Applying iptables firewall rules: iptables-restore: line 1 failed [FAILED]"
The install Guide im using: [URL]
This is my first post, I hope I'm the the right place. I installed mysql mysql-server php-mysql perl-DBD-mysql libdbi-dbd-mysql via "yum install -y" on a server running CentOS 5.3 X86_64 The install completes successful with no errors, but once I start mysqld via "chkconfig --level 35 mysqld on" ; "service mysqld start" There are no errors in /var/log/mysqld.log netstat shows mysqld listening on 3306 and localhost is in /etc/hosts
[Code]...
I have mounted an NFS share with ISO images on my kvm Server. If i connect such a iso to a VM (using virt-manager) for installing a operating system i get the following error on startup: Error starting domain: internal error Process exited while reading console log output: char device redirected to /dev/pts/1 qemu: could not open disk image /mnt/iso/public/Linux/Distributions/Debian/debian-504-amd64-netinst.iso: Permission denied
The problem is definitly that kvm (or qemu or libvirt-bin, i don't know) tries to set permissions (rwx owner for libvirt-qemu, --- for kvm group, --- for other) on the file, although it has read permissions. Is it possible to change this behavior?
I'm trying to make some pages. For this I try to host them locally. However, when I have an error in my PHP code, the server shows an internal error 500 page and doesn't show on what line and what compile error it encountered. There is no such information in the error log either. What should I do about it, it's not really nice to comment all the lines and then try to uncomment them one by one. I've been googling for a while, but didn't find anything.. I forgot to mention, I;m using Fedora :P, the apache that came with it and mysql and php from the repository...
View 3 Replies View Related