Ubuntu has been very good for us, fast, small foot print, But just yesterday it decided not to boot up. It gets to the login screen, and shows a warning... "Install problem, the Gnome power management configuration installed incorrectly, contact your administrator" What can I do to free this up?
View 1 RepliesI was using simple backup config to backup home to an external drive and it was working fine for the past week or so and today after the backup the computer was restarted and I am unable to log on. I get an error message saying. "the configuration defaults for gnome power manager have not been installed correctly "
I did some googling and the problem is that / is full. I have been trying for the past three hours to delete some space on / so that I can log on. I used ctr-alt-f1 and I can log on there but whatever command I use to delete the root trash it fails. I get an error message saying /root/.local/share/Trash/files/ is not a file or directory.
delete root trash so I can log onto this computer. I have used every variant of sudo rm -r /root/.local/share/Trash/files/ that I could find including one using Chmod. I have already tried the commands found in this tutorial [URL]
I also reinstalled gnome but that did nothing.
I just tried to start up Ubuntu and got the following error message. "The configuration deaults for gnome power manager have not been installed correctly. Please contact your computer administrator."
I then get a black screen, with the menu bar at the bottom, and a choice of who to log in as. No matter who I choose I get the same error message and then it takes me back to the same screen. It also gives me the choice of what session to use but again, no matter what I choose it just takes me back to the error message and the same screen. I am running Ubuntu 10.10 on an Eeepc 901. I have the Netbook version installed, but I was using the desktop session. The last time my computer worked I ran update manager and it updated some Intel driver i think. Sorry I can't remember the exact details. Not sure if this is something to do with it.
Laptop Acer Aspire 6930, Ubuntu 9.10 (Mint.
When I switch my laptop on when it runs from a battery, gnome-power-manager shows that it works from AC. It is enough if I really plug AC in and unplug it again, than g-p-m knows it works on a battery... It is frustrating when I want to use the laptop on the go, it doesn't know when battery is going to die.
My monitor kept powering down after 20 minutes so I installed Gnome-power-manager by yum so that I could change the settings. After the installation and every time I try to use it I get a message saying:
Quote:
Install problem!
The configuration defaults for Gnome Power Manager have not installed correctly. Please contact your computer administrator
I'm now unable to effect a change in the power settings and the display keeps turning off.
1) Is someone able to post their config file from a working F12 install? I believe it's /etc/dbus-1/system.d/gnome-power-manager.conf but not certain as I don't have one ;-)
2) ~/.gconf/apps/gnome-power-manager/%gconf.xml is empty - is it empty for someone with a working install?
3) how I can change the power settings without the gui - I'm googling on this point and will post the answer as and when I find it.
Code:
[ecvej@desktop ~]$ uname -r
2.6.31.5-127.fc12.x86_64
Edit: In case it is relevant, this is the contents of my /etc/gconf/gconf.xml.system/%gconf-tree.xml
[Code]....
Opps should raed GNOME power manager problem, but im sure you all guessed.I get an error when i try and log in.The configuration defaults for GNOME Power Manager have not been installed correctly. Please contact your computer administrator."I did try and follow the advice on other threads but nothing works so far.
I have an eepc- no cdrom drive.Right now im in malaysia so i dont have anyone to help me out. If you have any suggestions make them simple please i dont care if i loose everything on my computer just need it to work again
Things were running fine until GNOME misbehaved;
GNOME failed to load telling me:
Install error, Configuration defaults for GNOME power manager have not been installed correctly.
So I
Code:
To the shell and check the logs in gdm and find this:
Could not ask power manager if user can suspend, launch helper exited with unknown return code 0.
So I try
Code:
To see if another user will get the desktop; I get the error
Cant create etc/passwd no space left on device.
So I
Code:
And get the following
I insert a usb drive to prepare for back up; Run
Code:
On the shell to get the usb device name; Then run
Code:
To mount the device.
I end up with:
Cant create lock file /etc/mtab~ 4610 No space left on device(use -n flag to override)
So, I
Code:
And see 9 partitionitions
Code:
Again to check which ones are loaded at boot up time and get
plus some other file systems mounted at boot up, but not mapping to any physical partitionition.
I try
Code:
On partition9 and get warnings because its mounted, so I chicken out and try
Code:
And run into the error:
cant create lock file /etc/mtab~4832 no space left on device (use -n flag to override)
Good thing is there is a
Code:
Since space is a problem, I
Code:
On partition6 which is not mounted at boot up time and try to
Code:
I still get the error
cant create lock file /etc/mtab~4735 no space left on device (use -n flag to override
Code:
For package update tells me
cant open /var/run/zypp.pid in mode w
Code:
For power management tells me its not even recognised as a command.
My ubuntu isnt working after i write my password and press enter it does nothig but gives a massage ''the configuration defaults for GNOME power manager have not been installed correctly'' the recovery console doesnt work too(same problem) the problem appeared after i installed bittorent client called smth starting with 'd'.
View 4 Replies View Relatederror message says "configuration defaults for GNOME power manager has not been installed correctly";however, my laptop was working fine this morning. Now it does not even let me sign-in. I was attempting to install a back-up software using the "Accessories" button icon and the computer stopped working. Now it won't let me even sign-in.I use Ubuntu 10.04 and had done an update successfully (or so I thought), but what do I do now?
This message is coming to you from my desktop computer while the problem exists on the Dell laptop. Its model number is Inspiron 9300.
When i istalled kde4 on ubuntu 10.04 and login that this erro show me: p, li { white-space: pre-wrap; } Configuration file "/home/bahram/.kde/share/config/klipperrc" not writable. Please contact your system administrator.
View 1 Replies View RelatedHere's the error I get:
"The configuration has not installed correctly for Gnome power management".
Updated my 11.04 install via the update manager last night. When I turned my computer on today it wouldn't boot into the normal gui desktop. Where my normal login screen usually appears a different login screen appears with my username. I login. Screen flickers black for a few seconds and a page with a ton of text shows up for a fraction of a second ( too short of a time to read a single word). more flickering. Then I am returned to the slightly different login screen once again with the error. I tried booting into failsafeX gui mode. Same issue.
I am trying to figure out where the harddisk power management can be found in Squeeze. Before it was in the scripts under /etc/acpi, but in Squeeze it's not. I'd like to be able to change the hdparm -B value from 128 to 200 when using battery.
View 3 Replies View RelatedI disable that from the gnome power management utility screen go black after 10 minute. It's very annoying since I cannot watch a movie in that way!
View 6 Replies View RelatedI've just installed openSuSE 11.2, and I need to disable the feature that causes the laptop to suspend when you close the lid (and it's plugged in to the wall). I've already done this for my user profile, and I've attempted to do it for the root profile, as well, but when the GDM login screen is shown, the laptop still suspends when you close the lid.
View 3 Replies View RelatedAfter I have installed the Education package I cannot put my HP Pavilion laptop to sleep mode. I opened the Power Management and I can see the red light next to "CPU can be turn off". Also, when I close laptop lid it doesn't go to "Suspend to RAM" mode it still spin the fan.
View 2 Replies View RelatedRecently when I booted up my computer I get an error at the login screen.
"Install problem! The configuration defaults for GNOME Power Manager have not been installed correctly. Please contact your computer administrator."
When I try to login in, nothing happens. I cant seem to get past the login screen.
On the last release, I had this app installed where I could pick my power profile. I could use power conservatively, and performance would suffer a bit, but longer batt life,or I could have it automatically detect, or I could have the apps use all the power they want and then some. I'm looking to reinstall that app. What was the name of it?I can't remember, and so far, can't find.
View 2 Replies View RelatedHave not been installed correctly.
This message comes up as I am logging into my account. Upon entering my password it goes back to the logon screen.
Booting into recovery mode and different kernels doesn't help.
I'm running 10/11 on a toshiba satellite. i kinda got tired of loosing stuff because i mis-timed the battery discharge, so some months ago i pulled the battery and just ran on the adapter (back ground, i don't know if it's nothing, related to, or caused the problem).
monday morning fired her up - boom got the power "gnome manager not installed correctly"message. tuesday, googled gnome then power then... you get the route, and found Fedoraforum.org, read the stuff, did the yum remove...., did the yum install.... everthing seemed cool. 2nd reboot she stopped at the "f/infinity/balloon" kinda logo.
i went to verbose startup and - all sorts of services were failing; the word deprecate(d, ing, tion) came up a lot "device full..." came up a fair bit as well. when i tried the "yum remove" approach again i got [rpmdb: write: 0x1fd48b0, 8192: No space left on device]. similarily on "yum install" same kinda stuff - deprecation, BaseExpection, deprecated..... kinda long winded. up till now (13 years)
One day I was using Gparted and following this I rebooted and had this came up
"Install problem! Configuration defaults for Gnome Power Manager have not been installed correctly. Please contact your computer administrator."
Initially from reading the forums I figured it was because my Ubuntu partition ( I dual boot Windows 7 and Ubuntu 10.4) filled up for some reason.
I used a boot CD and cleared some files in /media. It seems like I kept about 17 GB of backups there for some reason.
The problem is that even though I cleared this out, I still have the same message.
I could just reinstall, but I want to try to keep my data for once, especially my virtualbox harddisks, unless someone can suggest a way to save it and reuse it.
After trying to backup my hard drive on my HP Mini 210-1054TU notebook PC, On start up the users menu comes up (A little changed) and when I sign in it comes back with a window flag that say: The configuration defaults for GNOME power manager have not been installed correctly.I can booth with a stick and see my files and directory but, I am not allowed to open any. There is no access to a terminal or anything but, the users menu. It appears to take the password as, if not right, it would say so but, only comes back with same menu and window flag.Ironic, I was trying to backup my files so I would not lose them.
View 1 Replies View RelatedI decided to upgrade my Asus Eee 900 from Lenny to Squeeze, to fix some issues that I was having. I did a fresh install using the beta1 netinstall cd image, and now my system is mostly working as I'd like it. Overall it seems quite good, and it even boots much faster than it did with Lenny.
I've encountered a problem, though. The suspend key doesn't work. I installed the package 'hibernate', and now the system can suspend via a command (which seems to work properly, although I haven't tested it extensively). I've noticed that the squeeze system doesn't have a command that my other Lenny systems do, 's2ram'. And I've noticed also that a package, uswsusp, which seems to be related to this kind of thing, can't be installed because it's not in the repositories: Package uswsusp is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package 'uswsusp' has no installation candidate
Despite having the Gnome Power Manager set to put the display to seep after 30 minutes, it always happens after 5 minutes. The display will go blank but still lit, and then it powers off after the 30 minutes. Surely, if I set it to 30 minutes, the display should power off then, and not just blank after 5? I have no screensaver packages installed so it's nothing to do with that.
View 2 Replies View RelatedI've done an upgrade from lenny to squeeze.Now, I'm getting a lot of udev warning messages at the boot time.Knows someone howto remove them?
View 6 Replies View RelatedI recently did a fresh install of current and once I had it up and running I compiled a fresh 2.6.33 kernel using my old config file, but now I get this warning durning boot, specifically during module loading WARNING: All config files need .conf: /etc/modprobe.d/sound, it will be ignored in a future release. This doesn't seem to be causing any problems but I am curious to know what the message meams? I checked /etc/modprobe but everything looks normal.
View 1 Replies View RelatedI have been doing some research on problems I have been having and I have narrows Compiz down to being the problem. I am running the prop Nvidea driver. I can use Unity 2d fine however I cannot use Unity at all I just get a blank screen with the mouse cursor no desktop ever loads. I have tried switching between gdm and kdm. I have now worked out that compiz looks like the problem. If I issue a compiz --replace at the terminal I get the same sort of problem I get when I log into the Unity 3d. I loose my left hand monitor (it goes black but I can move my mouse around) and on my right hand monitor I can operate things using the keyboard but when you click with the mouse it does not work although you can move it around fine. Never used Compiz and I dont know if anyone knows any troubleshooting I can try I have exhausted what I could find on the Internet (A few exports of global variables but none fixed anything).
View 1 Replies View RelatedI have a FC11 over AMD Sempron 2400+ 512Mb RAM and Im using it as 24 hours server, but after a few hours of work it makes something like suspend (don't response to network, clock freeze, etc. but screen works) till I touch mouse or keyboard.
I think this is a configuration item, but I'd searching about pm-utils and I found how config suspend and hibernate states, but nothing about what thing order a suspend every few hours.
I'd installed gnome-power-manager, and after config it for "never suspend", only change is, maybe, a bit more time before automatic suspend.
On my login-screen, there is a message saying that the configuration defaults for Gnome Power Manager have not been installed correctly. I can still log in and work normally, but it seems to me that the system is pretty slow (which might or might not be because of this). It's been there for a while when I used version 9.10, but didn't disappear when I updated to 10.04. I searched for other threads with this problem, and found:
1) This one:URL...saying that it could be because the root drive was full, and said that I could run "sudo apt-get clean" to try to solve it. This didn't work, and it doesn't look like I'm low on space, anyway. Plus I can log in normally, so it doesn't look like the same problem.
2) This one: URL....advises me to run "sudo dpkg --configure -a", which seems to have worked for other people, but it didn't help me--when I restart, I still get the same error message.
pt@pt-laptop:~$ gnome-power-cmd
gnome-power-cmd: command not found
pt@pt-laptop:~$ gnome-power-cmd
gnome-power-cmd: command not found
pt@pt-laptop:~$ gnome-power-cmd shutdown
gnome-power-cmd: command not found
how to install gnome-power-cmd cammand?
I had 9.04 64-bit with / and /home in separate partitions. Today I used 10.10 alternate install to install a command line system. Then installed gnome-core, synaptic, gparted, and a few other things. Now when I go to System > Administration > Synaptic Package Manager or to Gparted, I am asked for the "administrator password". I type in my password, but it is not accepted. However, from a terminal I can "sudo synaptic", give my password, and install whatever I want.
View 9 Replies View Related