Fedora :: Dual Boot Single Hard Drive Off USB
Oct 5, 2010
I currently have Windows 7 installed on my laptop and I would like to dual boot w/ Fedora on the same hdd.I have two NTSF partitions, I shrunk my D drive 50GB for ext4 & swap.I've tried both liveusb-created & unetbootin to create a bootable USB to install Fedora.Anaconda starts up and I get through most of the install configuration, I set up GRUB & the partitions. Once I proceed to the next screen I get missing ISO image 9660 error My laptop doesn't have a DVD drive. It seems like a lot of people are getting this error, but I have found no concrete solution though.
How do I put the image on the drive? Windows can't read ext4 and I haven't been able to find a program that can.I have a USB to SATA adapter that I could hook up a DVD-ROM drive too, but I don't know if fedora will pick up on it.
View 12 Replies
ADVERTISEMENT
Feb 1, 2009
After going back & forth between win7b & F10 installs, I can't get both to live on the same hard disk for dual booting anymore. win7 complains about fedora's GPT disk being unacceptable for installation. win7 blows away fedora's GPT partitions when it installs. Fedora doesn't recognize win7 partitions when it installs. I can't specify exact partition boundaries with windows even if I know what they are, and I can't seem to find any info how to do it in parted either. I have win7 installed in partition 3 in a known location on disk, but if I reinstall f10 (again), it's going to blow away the win7 boot data on the disk. How do I tell grub where to find the chainloader thingy? Can that still even be used? win7 no longer uses ntldr, and I haven't found an updated procedure for this new boot method.
View 4 Replies
View Related
Aug 27, 2010
Partition info:
sda2: Win7
sdb1: /boot
sdb2: LVM, containing , home, swap...
[code]....
View 14 Replies
View Related
Jan 12, 2011
i installed Ubuntu 10.10 on our second hard drive, and i cant dual boot it. it is set as slave, so should i set it to master, or do i need to hit a key @ initial boot. ive gotten a list that shows vista on it, which is on C: , but not ubuntu, which is on F:.
View 9 Replies
View Related
Jul 3, 2011
I currently have a 160GB hhd running Ubuntu 11.04 and Windows XP, with the following partition configuration:
sda1 Windows NTFS (primary-active and boot and system)
sda5 Linux Swap (logical)
sda6 Linux Ubuntu ext3 (root)
sda7 Linux Ubuntu ext3 (home)
sda2 other
I have Grub2 installed, which provides me the choice at boot to start either Ubuntu or XP. This currently works fine.
I want to clone this hhd and transfer to a new, larger hhd, and have several questions, since I don't want to make a mistake with something so crtical. 1) Which software is generally considered the safest, most reliable and easiest to use (dd, Gddrescue, Clonezilla, Paragon, Macrum Reflect, Easeus, Drive Image XML, or something else)?
2) Which software will be able to copy and include both operating systems in the partitions to be cloned?
3) Will that software change the booting process or options in the cloned copy in any way? I've read where using Easeus corrupts Grub2 and thus requires re-installing Grub2!
Are there any other concerns, considerations or factors I need to consider in cloning the hhd; e.g. prior formatting an external hhd, and with what file system? I've also read where FAT32 would be the choice, but don't really know for sure.
View 3 Replies
View Related
Sep 1, 2010
I have ubuntu 10.4 installed in xp. Ubuntu tells me I have 50 gigs HD space yet the folder tells me I only have 700 mgs and I am getting a warning of not enough space on the computer. My question is. Is this due to windows claiming the space and not allowing enough to be used by ubuntu? If I delete windows and make this computer all linux will that help?
View 2 Replies
View Related
Mar 1, 2010
partitioning my hard drive to dual boot windows 7 and open suse
View 2 Replies
View Related
Mar 17, 2010
I have a pc with windows on it, about 90% of the hard drive is full. I want to install dual
boot ubuntu with ubuntu using about 70% of the hard drive, do I need to manually create space, or can I just set during the install will ubuntu just over-write that much. I don't care about the files I have under windows.
View 1 Replies
View Related
Jul 28, 2010
I would like to have 1 hard drive operate with Ubuntu 10.04 and another with Windows 7 Pro, with a proper boot selection menu when I boot up my computer.
View 5 Replies
View Related
Sep 29, 2010
I have Windows 7 x64 on a RAID0 Setup and have a separate 120GB Hard Drive and want to DualBoot with Ubuntu! How do I go by doing that seeing that LiveCD is not detecting Windows 7 Loader?
Twitpic : [URL]
View 3 Replies
View Related
Oct 23, 2010
I'm trying to create a dual-boot system, and have been following the instructions here. However my hard disk has bad sectors, and GParted won't let me resize the Windows partition. It tells me to use ntfsresize with --bad-sectors as an option, after having done some checks, all of which I've done. I've successfully shrunk the NTFS volume in this way -
when I boot into Windows, it says the hard drive is the size I set it at. However, the Ubuntu installer and Gparted still see the Windows partition taking up the entire hard drive. So, for the installation, do I have to set the size of the volumes manually, or is there a way to make Ubuntu see what ntfsresize has done?
View 2 Replies
View Related
Dec 24, 2010
I just got a new hard drive and need to transfer my dual boot window 7/Ubuntu 10.10 onto the new hard drive and be bootable. Is there an easy was to do this?
View 3 Replies
View Related
Jan 9, 2011
I have a laptop with two partitions, one with Windows XP and one for storage (formatted in NTFS). I would like to install Ubuntu on the storage partition, but my problem is that I can't boot from CD (or anything else) because my BIOS is password protected. I obviously don't know the password. y question is: If I plug the laptop's hard drive into another computer, install Ubuntu as described above and then reconnect it to my laptop, will it work?
View 2 Replies
View Related
Jul 28, 2011
I was attempting dual boot my computer (ubuntu 11.04 and windows 7) and when I got to the stage to allocate drive space I accidentally formatted the largest partition of my hard drive to a linux swap. My computer froze while it was formatting the drive and I was forced to power off my laptop. Windows was my original operating system and was installed on the partition that is now formatted (or maybe not because of the crash during the formatting) as a linux swap. Therefore my windows no longer works and I cannot restore my computer for a backup because it wont let me restore it to the partition that is now a linux swap. Now when I boot from the linux install cd I get an error and am not able to install ubuntu or format/allocate drive space. Is there a way I can reformat and fix my harddrive so I can them restore windows.
View 9 Replies
View Related
Feb 23, 2010
A few weeks back I was trying to install this (alongside windows 7) and no matter what I tried it would not install. I tried both 9.04 32 bit and 9.10 64 bit. Each screen (language, keyboard, etc) took about 20 minutes to load, and when I finally got to the install it always stopped at about 2/3 percent, giving some type of I/O error. No matter how many times i reburned and redownloaded. (old thread if you're curious)
I eventually gave up but then realized I had an old xbox hard drive hooked up that I cannot boot or read or do anything. It was set as hard drive 0 in windows hard drive manager or whatever. So I unplugged it. Now my windows drive is drive 0, and I have a second internal drive.
I finally got back to installing this. I avoided the graphical installer at first because it was so slow, opting for the alternate cd. It went fast but when I tried to partition it was unclear to me which disk i was partitioning. Doesnt matter because when i clicked ok, it froze at 0% for 30 minutes so i had to do a hard restart. Windows ran the disk check, etc, etc, I checked the disk management in windows and it was just a single windows partition as it should be.
So I tried the graphical cd again instead. It goes really fast through the screens now, HOWEVER it will not detect my drive 0 windows drive! Just my second internal drive which of course I can't install on without wiping the entire thing. I have installed kubuntu 9.04 dual booted with windows xp on this exact hard drive, over a year ago successfully, so I don't get it. What do i do??
View 6 Replies
View Related
Oct 8, 2010
I'd like the final layout to have a Windows partition (will start out as XP and will become Win7 when I can afford yet another copy), a partition for Ubuntu, and a shared Data partition that I can use for all my files between both OSs. I think this should be fairly straight forward with Linux on a Primary partition with / and swap. Only thing is, from what I've read (and yes I know this is a bit old school) it might be a good idea to put in a /Home partition so that I can reinstall new upgrades and maintain settings. But I don't want to max out my 4 primary partitions so I can use a 4th partition as a kind of sandbox for OS testing without using VirtualBox all the time.
This leaves me in need of some advice, I've never used Fdisk and I was planning on just using the Ubuntu installer to do all of this, but I don't know if I can create /Home as a logical partition in the main Ubuntu partition and still have the benefit of being able to reformat /root without losing /Home. I might have just confused myself, because no matter how many guides and How Tos I read I still don't really get extended partitions, I understand logical vs. primary but extended is...confusing. I need the Ubuntu partition to be bootable, so it needs to be a primary partition...I think. Unless I can have: /boot, /, swap, and /Home...
Also, if Ubuntu can read NTFS, and Win7 can read Ext3, what should a do with /Data? Or should I just go with FAT32 and be done with it. (It's a big HDD btw, 640 GB, so /Data will be fairly large)
View 6 Replies
View Related
Nov 1, 2009
I have installed on my computer Fedora 10, now I want to install opensuse and create a dual boot environment and I want to have them both on the same hard disk. how to carry on with this task?
View 7 Replies
View Related
Feb 10, 2010
I recently got a netbook and setup as dual boot between win7 starter and 9.10 (64bit). Win 7 starter is not impressive so i want to nuke it and give the space all to my /USR partion. I am comfortable working with Gparted and assume that i can launch using my gparted live usb and delete the windows partion and then resize the /usr partion.
what changes do i need to make w/ Grub2? I would prefer not to see the Grub menu at all and have it load right the main kernel if possible. Also, if this is possible is there a way to get to the Grub menu during boot should i need to select a different kernel?
View 2 Replies
View Related
Jan 9, 2010
I've recently bought the "new" Macbook from Apple. It obviously came with OSX preinstalled. And I'm obviously not satisfied with the way it works, I also need a FAT32 partition so I can share my files between all three OS's. Tricky business. And I thought later on I might try and create me a nice LFS system to learn about Linux and show of to my mates. But doesn't a single hard drive only support up to 4 partitions? So off I went and got Ubuntu running besides Mac. It wasnt recognized by neither the default boot-loader nor rEFIt straight away. I had to hold alt to come up with the special BIOS or something every time I needed to use Ubuntu (always).
I got up to a point where I could run Ubuntu with wireless, sound and pretty much everything working. Until the kernel updates were installed. Somehow I (or maybe it) managed to screw up and booting had become impossible, for it would crash halfway through with kernel errors and other undefined weirdnesses. Meanwhile I had tried installing Windows 7 on a different partition. Which I found to be catastrophic also. I was forced to put up with OSX, which in my opinion is fine at what it does but it doesn't do very much for me. After a couple of tries I had to give up on fiddling with Ubuntu for I needed Windows 7 to run software for school. So my current partition layout looks like this......
View 9 Replies
View Related
Jul 21, 2010
how to format a single Ubuntu hard drive - no partinioning at the moment.
View 4 Replies
View Related
Sep 4, 2010
I've got a win7/ubuntu 10.04 dual boot running on my system. I did the usual of installing 7 first, then ubuntu and using it as the default boot option. I now want to get rid of win 7 and expand the ubuntu installation into the free space. My current hdd structure is in the attachment. If I just boot a live cd and gparted to remove the win 7 partitions and expand the ubuntu installation into the free space, will that work or will it have a massive panic? how to I get grub to silently boot after without offering me any boot options?
View 7 Replies
View Related
May 25, 2011
Today I decided to give Fedora15 a shot, mainly because of Gnome3, and so decided to install it over my Ubuntu installation. This is my partition scheme:Two NTFS partitions for Windows;
One logical partition, which inside has:
/dev/sda5 for /boot
/dev/sda6 for /
[code]...
View 14 Replies
View Related
Feb 19, 2010
How do I erase windows completely and just run puppy. Also how do I download and install damn small linux.
View 4 Replies
View Related
Mar 19, 2010
I cloned a Fedora 12 hard drive to a new hard drive using Seagate DiscWizard. Everything appeared to go well. However the new hard drive will not boot. How do I make it bootable?
View 5 Replies
View Related
Feb 9, 2009
i'm tying to dual boot Vista64 (already installed) and Fedora 10 x86_64. I am running a Dell XPS 410 running 2 sata hard drives raid 0 (ICH8DH). I started the process by shrinking my C drive on disk0 leaving 64.45GB of unallocated space. Next I rebooted into Fedora install DVD and when i get to blue graphical install screen i get message asking if my drive is GPT and if it is it may be corrupted. I click NO, and it comes up with a message telling me i have to initialize my drive if i want to use it ( have to click NO twice) and if i do it i will lose all my data.
i can click no and keep proceding through the install until i get to the partition setup screen. No hard drives or partitions are shown. I've tried googling the problem and get bits of pieces of information scattered in different parts but nothing conclusive to my problem i think. As far as my background of knowledge goes, I'm new to the linux community but give me a thorough guide and i'll do fine (i hope). I've been using fedora on a separate laptop for 2 days now .
View 9 Replies
View Related
Jan 16, 2010
I currently have a dual boot of Windows Vista and Ubuntu 9.10. I only had Vista purely for playing games, and using certain applications, but recently I decided that I could just configure Wine to work on my system. I was wondering if it was possible to extend the Ubuntu partition as it is over the whole drive, so that I don't lose all my stuff from Ubuntu. Or should I just keep it dual boot, for those few programs that Wine doesn't have quite down? I know this might not have much to do with anything, but I have an NVidia GFX card.
View 1 Replies
View Related
Jul 25, 2010
I have two hard drives one with Windows XP and one with Ubuntu 10.04. The hard drive with Windows XP has been dying out slowly over the last week thankfully I backed up all my important information. The problem is that now that the Win XP hard drive is dead I can't boot into Ubuntu nothing pops up just the blinking cursor. I believe this is because when I installed ubuntu the Windows XP HD was already in the first slot and may have all the boot information. I have the LiveCD and can boot into that successfully.
View 3 Replies
View Related
Dec 5, 2010
I am not smart enough to figure out how to install Fedora 14 correctly. I have an older computer with 2 20gb drives. On the first drive (sda) I have Windows XP, and on the 2nd drive (sdb) I am trying to install Fedora 14. The catch is that I would like to put Grub and the MBR on the first drive so that when the computer boots, it asks whether to load Windows XP or Fedora. I know I have done it with Fedora 13 in the past, but have forgotten how to do it. How to accomplish this in Anaconda for Fedora 14?
View 2 Replies
View Related
Mar 5, 2010
Situation:
8GB SSD
#! on a 3.7GB partition, only 2.5GB used
Kuki (XFCE) on a 3.4GB partition, about 3GB used)
Both have their own /home folders within their individual /, but since I don't use this computer for documents/personal files, I figured it may be an idea to keep a 1GB partition just for my Home folder which would work for both distros. Both distros are Ubuntu based. Crunchbang uses Openbox, Kuki uses XFCE. They both are running the same kernel right now too in fact. I know how to use Gparted to create the spare 1GB partition, but I'm not sure how to get both distros to move their /home over there. I have the same usernames on each distros.
View 3 Replies
View Related
Jan 24, 2009
I just got a 1.5 tb I want to do a dual boot fedora 10 and vista. I don't have vista now. Can I install fedora 10 on a 200 gig partition and install vista on the rest when I buy it later?
View 3 Replies
View Related
