I have a HP nx7400 laptop. Now I have a docking station DC power adapter - Works Fine. Ordered another DC so i could travel with it, but when used ubuntu runs at a very slow speed.
View 3 Replies
I just want to know how to easily speed up my computer because it runs desperately slow. I am running windows Xp which is about two years old.
View 9 Replies View RelatedI have a machine currently running Debian Lenny on which I would like to run Ubuntu for the driver support in its newer kernel. However, I did a test boot from the installation CD and it appears to be running at less than half its rated speed. This is the output from the Debian kernel:
brendand@kant:~$ uname -a
Linux kant 2.6.26-2-amd64 #1 SMP Wed May 12 18:03:14 UTC 2010 x86_64 GNU/Linux
brendand@kant:~$ cat /proc/cpuinfo
processor: 0
[Code].....
Maybe this is some sort of power save bug where the CPU speed is incorrectly scaled back. Has anyone else encountered this problem? Should I report it as a bug, and, if so, how do I do that?
I have a Compaq 8710w and after upgrading to the latest Debian/testing (Linux version 4.1.0-1-amd64)the fan runs at full speed all the time. There seems to be something strange with the temperatures reported by temp4, it is stuck at 100 degrees.:
Code: Select allroot@...:~# sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +16.0°C (crit = +105.0°C)
temp2: +38.0°C (crit = +105.0°C)
temp3: +22.6°C (crit = +110.0°C)
temp4: +100.0°C (crit = +110.0°C)
temp5: +37.0°C (crit = +110.0°C)
[code]...
I found this related problem: URL... . Note that here the problem is that the fan does not spin and that temp4 reports 0 degrees.
I have machine which I am using a server for all my office activities. We have fedora (11.0) installed in that system. When even power goes out system is getting shut-down abruptly. We have UPS for this system and some times UPS also runs out of power. Do we have any software, which monitors battery power and shutdown the system gracefully, when system knows that power is running out. I am using desktop machine, not a laptop. So I may some hardware like battery which runs fot sometime, even though there is no power. Then there will software which monitors and shut down the system gracfully.
View 3 Replies View RelatedI've been having issues with my laptop. It's a Vostro 1700..My web browser runs very slow and every now and then the computer will become unresponsive. Sometimes it will not open application and will get: couldn't exe command GCACTOOL.I decided to go back to Windows XP to see if Ubuntu was the problem but it wasn't.I got error messages regarding the HD, soo I bought a new HD but the problem is still there.
View 6 Replies View RelatedI installed ubuntu 10.04 and then updated my system with gui, now it's running slow like a second or two sometimes for apps to respond? wonder if anyone can tell me what's up?
View 8 Replies View RelatedI've been asked to look at a system which is running slowly. It's running hardy on an intel Q9400 quad core CPU system which should be a pretty fast machine.
The most obvious symptom of this problem is that the terminal takes about 10 seconds to open instead of the usual fraction of a second.
What I've discovered so far is that the system has 2 network ports one configured to access the LAN and the other to connect directly to another piece of hardware using a different subnet. If the LAN is not connected the system runs slowly and if it is connected it runs at normal speed. It also makes no difference whether or not the second network port is connected.
I've looked at the system monitor and can see no abnormal network traffic or processes using a lot of CPU resources.
I've just upgraded my from F11 to F12 via software update and found F12 extremely slow to the extent that only the mosue cursor moves, the rest does not - not even opening folders or starting application.
My specs:
Core2Duo
1GB RAM
160GB HDD
It seems that
npviewer.bin is taking up up to 50% of CPU. Xorg takes 20%..
My friend recently gave up on Windows Vista on his old laptop and installed Ubuntu 10.10 64 Bit on it. He came over the other day because I wanted to show him and install some cool things. One of those things was a dock. I tried both AWN and Docky. When the dock started running his system became so unbearably slow. Like it took over 5 seconds to respond to movements sometimes. When he closed the dock everything went speedy again. He has a whole lot of compiz stuff running now, including desktop cube/animations burning up windows when he closes them. I'm wondering why the dock is causing such a major slow down.
His specs aren't even that bad. He has a Dell XPS M1330 with the following specs:Intel Core 2 Duo T6400 (2.0GHZ)4GB of RAMNVIDIA 8400M GSMy laptop has very similar specs to his, except my integrated graphics card is an ATI 3200 and it runs AWN and Docky flawlessly. Anyone have any ideas what could be causing this? His graphics card was one of those faulty NVidia cards from back then but he already had it fixed twice and its been running Vista without any graphic issues fine since. I didn't get a chance to look at it again since then so I couldn't play around.. I'm thinking he might have possibly messed something up playing around when he first installed it. I may suggest a clean install and do everything again to see if the problem persists.
I have a laptop with a sis 650 video card. It works just fine except in video games like assault cube where it runs really slow. Now that could be because I have less than a gig of memory, but more likely it seems lack of 3D support. I found the sis_drv.o-402 file on the sis site, which seems to be a kernel module. This info came from an article that is a couple of years old. It, and other references speak of using "insmod sis_drv.o-402". I can not find such a command, nor can I find reference to it in the opensuse site. I also can not seem to find which driver I am currently using, and if it has 3D support.
View 1 Replies View RelatedI've tried watching ESPN3 on several systems using F14 with no success. Everything runs very slow and after a few seconds, I get a frozen screen and then a white screen. I'm wondering if anyone else is having this problem or is it just me? [URL] Everything else that uses flash seems OK, even HD vids on ......
View 5 Replies View RelatedHow to temporarily lock CPU speed or stop power management? There is no /etc/init.d/powernowd
View 4 Replies View RelatedI am running Ubuntu 10.04 from a USB key (16GB). Overall I'm pretty fine with it but there are a few problems I am having. It seems to be very slow. In particular, Firefox and Pidgin freeze every now and then, before becoming active again. The same thing also happens for other applications such as Rhythmbox, Gedit, and the terminal. Additionally my start up and shut down times are horrible (worse than when I use Vista and Ubuntu 8.04). I was wondering if there is something with my install or if this is all due to the fact that I am running from a USB. I don't think it's the USB since I ran 8.04 from a USB HDD (55GB) and didn't have any problems with speed.
View 4 Replies View RelatedI have a server and i think that my server is under Ddos attack. i see that server is not having much load and only few process runs but my site opens very slow. i executed the following command on my ssh:
[Code]....
I just installed Ubuntu 9.10, replacing Windows 7.
its running a little slower than I hoped it would, loading movies takes a while, and when i switch to full screen, it takes about 5 seconds to catch up.
im suspicious that my video card driver might not be configured correctly. can anyone tell me what I might need to configure to get things running smoother?
other things on the computer are also running slow, like opening Firefox, it takes a while for the window to appear.
- Athlon 64 x2 5200+
- Gigabyte GA-MA78GM-S2h motherboard
- Radeon HD 3650 512mb pci-e
- 4gb DDR2 800
and I do have ATI catalyst installed
I have been trying out Ubuntu One for the past couple of days but find it to be incredibly slow. At first i had put a folder will a large amount of images in the ubuntu one folder. The total size of it was 35Mb, after over 26 hours only 11,5Mb of that had been uploaded.
After looking around some on these forums i saw several comments about it being slow when it is a large amount of files, no matter if the filesize is small or large. I decided to try it out with a larger single file. I erased everything that was in the previous share and then put my testfile of 350Mb in the Ubuntu One folder.
After two hours of waiting i could still not see it on the U1 website so i decided to see how long it would take with dropbox and put a copy of that file in my dropbox folder as well. The file was uploaded correctly to dropbox in just a couple of minutes but it has still not been uploaded to the U1 website even though it has been 4-5 hours since i first put it in my U1 folder.
I need to transcript some recordings to a friend of mine. I woule like to have the sound playing slower than usual. Is it possibe on any Ubuntu (L. Lynx) anyway? How?
View 7 Replies View RelatedWhen using launchpad and the ubuntu daily build website it is very slow. I get 1.2mb/s normally and the speed drops quickly to 0kb/s This is the case from any version of ubuntu that is installed on my laptop.In windows it is no problem, equally there is no problem from a live cd or an install on my external hard disk. Is canonical blacklisting/slow listing my ip?
I am behind a university network but am sure this problem occurs at home .I did a clean install and had no problem until about an hour ago. When I tried to re download a project using bzr my speed instantly ropped.I had downloaded it fine a couple of hours ago. I hope that someone can shine some light on this, its very hard to work on projects if I can't download them.
I use Brasero 2.32.0 to burn DVD's and the max speed I reach writing on my 16x DVD's is 2.5x (more or less).
Follows info's about my OS and HW setup code...
I have very suboptimal Internet speed in Wifi with Ubuntu. Normally in WIndows 7 I get download speeds up to 800 KB/s and a very fast Wifi experience, but in Ubuntu I get 100KB/s maximum and web page load speed is very extremely slow. Also, pinging to AP often gives very high response times and a lot of lost packages while in Windows they are very low and none packages are lost. I have a Netgear wg111v3 which worked out of box when I installed Ubuntu but always with this problem. It is updated and I've reinstalled Ubuntu many times..
Also I forgot to say that in Ubuntu the connection goes down very often and sometimes will not connect again until I reboot. Again in Windows never happened that.
Motherboard: GA-MA74GM-S2H
CPU: AMD Athlon 64X2 dual core
2 GB RAM
Ubuntu 10.10 64 bit
Wireless adapter Netgear wg111v3 USB .....
I have just formated and did a fresh install to start all over. I installed Ubuntu 9.1 and everything went fine but the network. The computer serve as a NAS and MediaPlayer. When getting a file from the server, I get a speed of 40-60mb/sec, which are good for a Gigabit network. When I try to put a file in, the speed can't pass more than 1mb/sec and often stop.
Here's the network info:
Code:
vric@XBMC:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:24:8c:a1:eb:55
inet addr:192.168.1.5 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::224:8cff:fea1:eb55/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]...
Edit: Looks like it's a Gigabit Problem. I connected the Ubuntu box to my Linksys router which is 10/100 and everything is MUCH faster.
I've been using Ubuntu 8.04 for about a year and the wireless has been fine but now it's gone screwy and I can't figure out why. This has happened on my laptop and wife's who uses Ubuntu Hardy also. The speed drops to almost 0 mb/s whenever the signal strength is less than 95%.
It isn't the internet connection as vista (I dual boot) works fine below 95% signal strength. To get the internet speed to be at a level that can load an internet page, I have to within 3 feet of the router!! Both of the laptops don't use ndiswrapper, the internet connected straight away from a fresh install.
I'm experiencing slow speed transfer between two wireless connected laptops running ubuntu 9.10. Using SSH to tranfer files between these two laptops, which connect to the internet via a wirelesss router, with good speed. This is why I'm surprised by this low speed : 52.3 KB/s, averaging 3 hours and 31 minutes for a 700 Mb movie. Is there any way to make this faster ?
View 3 Replies View RelatedI just installed ubuntu 10.4 on my new laptop and when it boots up there is no splash screen (All I see is a blinking cursor) and it takes about 28 seconds to boot up... I do have all the graphic stuff working...
View 2 Replies View RelatedUsing 10.04 my download speed is so slow, with Opera browser(tried FF too)using places like rapidshare, I get 70/80 kbs , but on windows machine on same connection/line, i get 500/700 using same link,Did i miss something? Is this a firewall problem? or is it just me?
View 1 Replies View RelatedBasically the problem is a slow download speed over my wireless connection that does not occur in Windows Vista. The reason I'm so annoyed is that the speed is not constantly slow. It bursts at around 600kb/s (good for my internet connection). The problem is that while trying to download a file it bursts for about a second,then total throughput decreases to +/- 1kb/s for a few seconds, then another burst and so on. Note the file I'm downloading is a http:// download, not p2p or anything. I've attached a screenshot of the System Monitor.
Screenshot-System Monitor.png
Some additional info. I'm using Ubuntu 10.04 with all available updates installed. The browser in use is Google Chrome.
I have been having come problem, my surfing speed has gone to zero. I can download at full speed but surfing is crawl speed or just timing out. I am pretty sure it's because firefox is clogged, I just want to know is there a way to clear the clog w/o losing my settings? I fixed this before by making a new user, but I don't want to loose all my saved form's and bookmarks.
View 8 Replies View RelatedI have installed ubuntu 9.04 version. But now its too slow to copy files to any devices or even to other drives.
View 3 Replies View RelatedFirst of all i would like to inform that I am new to Ubuntu. I had Ubuntu 9.04 install on my HP Pav. Laptop with Winxp. Before some days I upgraded it first to 9.10 and then to 10.04 as suggested in Ubuntu site. After the upgrade I found that the boot up is very slow. I heard and read that Ubuntu 10.04 has very fast booting but I don't experience that, though shutdown is faster.
I read many threads on this forum about slow booting and tried to resolve the issue using those, but nothing is working. I also installed bootchart and tried to get something out of it, but frankly saying I don't understand that chat . I have 1gb of ram.
I have attached the bootchart image. Please help to find the problem.
