Installation :: Slow Boot After Upgrading To Ubuntu 10.04 / Speed It Up?
Aug 12, 2010
First of all i would like to inform that I am new to Ubuntu. I had Ubuntu 9.04 install on my HP Pav. Laptop with Winxp. Before some days I upgraded it first to 9.10 and then to 10.04 as suggested in Ubuntu site. After the upgrade I found that the boot up is very slow. I heard and read that Ubuntu 10.04 has very fast booting but I don't experience that, though shutdown is faster.
I read many threads on this forum about slow booting and tried to resolve the issue using those, but nothing is working. I also installed bootchart and tried to get something out of it, but frankly saying I don't understand that chat . I have 1gb of ram.
I have attached the bootchart image. Please help to find the problem.
my laptop's boot speed has been tremendously dropped (approximately from 30 secs to 3-4 minutes) after I've upgraded from 10.10 to 11.04.What do you recommend me to check in order to get back my lost time?
I just installed ubuntu 10.4 on my new laptop and when it boots up there is no splash screen (All I see is a blinking cursor) and it takes about 28 seconds to boot up... I do have all the graphic stuff working...
Ran the update manager, system was pretty much up to date, only a few files to download. Was it ever SLOW. Most of the time I can download from other sites about 650 kB/s. The update was around 10 kB/s and slower sometimes. What is wrong? Just a lot of people updating at the same time?
I try to upgrade to 10.04, but the download rate is extreme slow (10.0 B/s sometimes a bit better and sometimes even worser). I switch to different server but the problem remains.
I took wubi to install ubuntu 11.04. And after installing wubi, my desktop's boot speed become very slow.
After switched, ASUS(the screen that DEL key can make acess bios screen) screen takes very long time to get next screen(OS selecting). And, after choosing ubuntu, also took long time as black screen(with white bar appearing at upper left). Qurious thing is, I did same things at my lab top too, but didn't get slow down.
I am running Ubuntu 10.04 from a USB key (16GB). Overall I'm pretty fine with it but there are a few problems I am having. It seems to be very slow. In particular, Firefox and Pidgin freeze every now and then, before becoming active again. The same thing also happens for other applications such as Rhythmbox, Gedit, and the terminal. Additionally my start up and shut down times are horrible (worse than when I use Vista and Ubuntu 8.04). I was wondering if there is something with my install or if this is all due to the fact that I am running from a USB. I don't think it's the USB since I ran 8.04 from a USB HDD (55GB) and didn't have any problems with speed.
I just installed Ubuntu 9.10, replacing Windows 7.
its running a little slower than I hoped it would, loading movies takes a while, and when i switch to full screen, it takes about 5 seconds to catch up.
im suspicious that my video card driver might not be configured correctly. can anyone tell me what I might need to configure to get things running smoother?
other things on the computer are also running slow, like opening Firefox, it takes a while for the window to appear.
I have been trying out Ubuntu One for the past couple of days but find it to be incredibly slow. At first i had put a folder will a large amount of images in the ubuntu one folder. The total size of it was 35Mb, after over 26 hours only 11,5Mb of that had been uploaded.
After looking around some on these forums i saw several comments about it being slow when it is a large amount of files, no matter if the filesize is small or large. I decided to try it out with a larger single file. I erased everything that was in the previous share and then put my testfile of 350Mb in the Ubuntu One folder.
After two hours of waiting i could still not see it on the U1 website so i decided to see how long it would take with dropbox and put a copy of that file in my dropbox folder as well. The file was uploaded correctly to dropbox in just a couple of minutes but it has still not been uploaded to the U1 website even though it has been 4-5 hours since i first put it in my U1 folder.
I need to transcript some recordings to a friend of mine. I woule like to have the sound playing slower than usual. Is it possibe on any Ubuntu (L. Lynx) anyway? How?
I wanted to use Ubuntu on one of my old laptops (a great, speedy modern OS on a modest hardware PC). Unfortunately this PC can not at the time read all CD-ROM's (can't figure out why it does read some) and I've installed Ubuntu 7.10 - the only CD it did read at the time.
I've used it for two years but I never got my wireless card to work (OK, most of the time it was collecting dust) A couple of days ago I finally realized how to use ndiswrapper (lol...) and I was able to get a working Wi-Fi connection on this laptop. I then proceeded to upgrade it over the internet, to Ubuntu 8.04, then 8.10, then 9.04 and, last night, to 9.10.It has worked through each and every of these updates, but after 9.10 the PC won't even boot (after "GRUB loading...).
I have dual boot my Windows 7 PC with Ubuntu 10.10 recently. Ubuntu boots well until I upgraded the system with Upgrade Manager. Then all of a sudden it won't load anymore.
When using launchpad and the ubuntu daily build website it is very slow. I get 1.2mb/s normally and the speed drops quickly to 0kb/s This is the case from any version of ubuntu that is installed on my laptop.In windows it is no problem, equally there is no problem from a live cd or an install on my external hard disk. Is canonical blacklisting/slow listing my ip?
I am behind a university network but am sure this problem occurs at home .I did a clean install and had no problem until about an hour ago. When I tried to re download a project using bzr my speed instantly ropped.I had downloaded it fine a couple of hours ago. I hope that someone can shine some light on this, its very hard to work on projects if I can't download them.
I have a HP nx7400 laptop. Now I have a docking station DC power adapter - Works Fine. Ordered another DC so i could travel with it, but when used ubuntu runs at a very slow speed.
I have very suboptimal Internet speed in Wifi with Ubuntu. Normally in WIndows 7 I get download speeds up to 800 KB/s and a very fast Wifi experience, but in Ubuntu I get 100KB/s maximum and web page load speed is very extremely slow. Also, pinging to AP often gives very high response times and a lot of lost packages while in Windows they are very low and none packages are lost. I have a Netgear wg111v3 which worked out of box when I installed Ubuntu but always with this problem. It is updated and I've reinstalled Ubuntu many times..
Also I forgot to say that in Ubuntu the connection goes down very often and sometimes will not connect again until I reboot. Again in Windows never happened that. Motherboard: GA-MA74GM-S2H CPU: AMD Athlon 64X2 dual core 2 GB RAM Ubuntu 10.10 64 bit Wireless adapter Netgear wg111v3 USB .....
I installed Ubuntu 9.10 on Windows 7 system using Ubuntu disk partion option. Unbuntu works great but I can no longer access W7. Windows Loader Boot Option is in normal position as last selection of Grub menu but arrow keys do work. Acts as if keyboard is locked. System defaults to Ubuntu 9.10. How do I select Windows Loader Option
I am trying to upgrade to Ubuntu 10.04 and stumbled on a little problem. My partition scheme is as follows and I am installing Ubuntu on an External USB harddrive:
499 GB HARD DISK WD My Passport 070B MBR Partition table 49 MB Filesystem --/boot Linux Ext4 (version1.0)
I have a dual boot (2 hard drive) system, and upgraded to 10.4. Booting into XP results in a flashing cursor that doesn't do anything. I know that GRUB screwed everything up, but I need to know what to do--and assume I don't know what I'm doing--to restore my dual boot ability.
Here's what I get after running a boot info script code...
i was in ubuntu 10.04 and I thought geting the lastest version is the smart thing to do right? so i went to the update manager and upgraded it to 10.10. but now when i restart the computer all I get is " a black screen with white text that says "Gnu Grub Version 1.98+20100804-5ubuntu3Minimal bash - like editing is supported for the first blah blah, Tab lists possible command completions. Anywher else TAB lists possible device or file completions.grub> "I have a dual boot that has Windows 7 and Ubuntu, Ubuntu being my main OS, I really need to get back on it.
I had ubuntu 10.04 dual boot with win xp and I recently decided to upgrade windows to win 7. Once I did that I could no longer see the grub therefore I couldn't manage to boot into ubuntu. I don't know what to do, the installation is there because I never touched that partition
I have just formated and did a fresh install to start all over. I installed Ubuntu 9.1 and everything went fine but the network. The computer serve as a NAS and MediaPlayer. When getting a file from the server, I get a speed of 40-60mb/sec, which are good for a Gigabit network. When I try to put a file in, the speed can't pass more than 1mb/sec and often stop.
I've been using Ubuntu 8.04 for about a year and the wireless has been fine but now it's gone screwy and I can't figure out why. This has happened on my laptop and wife's who uses Ubuntu Hardy also. The speed drops to almost 0 mb/s whenever the signal strength is less than 95%.
It isn't the internet connection as vista (I dual boot) works fine below 95% signal strength. To get the internet speed to be at a level that can load an internet page, I have to within 3 feet of the router!! Both of the laptops don't use ndiswrapper, the internet connected straight away from a fresh install.
I'm experiencing slow speed transfer between two wireless connected laptops running ubuntu 9.10. Using SSH to tranfer files between these two laptops, which connect to the internet via a wirelesss router, with good speed. This is why I'm surprised by this low speed : 52.3 KB/s, averaging 3 hours and 31 minutes for a 700 Mb movie. Is there any way to make this faster ?
Using 10.04 my download speed is so slow, with Opera browser(tried FF too)using places like rapidshare, I get 70/80 kbs , but on windows machine on same connection/line, i get 500/700 using same link,Did i miss something? Is this a firewall problem? or is it just me?
Basically the problem is a slow download speed over my wireless connection that does not occur in Windows Vista. The reason I'm so annoyed is that the speed is not constantly slow. It bursts at around 600kb/s (good for my internet connection). The problem is that while trying to download a file it bursts for about a second,then total throughput decreases to +/- 1kb/s for a few seconds, then another burst and so on. Note the file I'm downloading is a http:// download, not p2p or anything. I've attached a screenshot of the System Monitor. Screenshot-System Monitor.png Some additional info. I'm using Ubuntu 10.04 with all available updates installed. The browser in use is Google Chrome.
I have been having come problem, my surfing speed has gone to zero. I can download at full speed but surfing is crawl speed or just timing out. I am pretty sure it's because firefox is clogged, I just want to know is there a way to clear the clog w/o losing my settings? I fixed this before by making a new user, but I don't want to loose all my saved form's and bookmarks.
I started a thread in the hardware section, but I've narrowed it down to being a software issue. The problem is that all USB devices are written to at about 1MB/s, and is read at equally slow speeds. After testing my computer on an older Ubuntu release (8.04 32bit), I verified it wasn't a hardware issue, because the read and write speeds were like they were supposed to be. Then, I downloaded the 32bit release of the Ubuntu version I'm currently using (an up-to-date version of Natty) and booted the live cd of it. It was equally slow there as well.
The read/write speeds are equally poor on openSUSE and Arch Linux, so I don't think that it's an issue with Ubuntu, as much as it seems like a kernel issue (or maybe not, you guys can correct me if it seems like it isn't ).
I have a big problem my hard drive is works fast all the time and now i hear clicks and scratching and weird stuff from so how can i make it slow down. i cant buy a new one if it breaks down ...
