Ubuntu :: Computer Won't Boot After Restoring Clonezilla Image?
Jul 18, 2011
I have long been using clonezilla as my backup/restore software and have never had a problem with it before, ever. Today I backed up my entire disk (windows 7 and Ubuntu 10.10) and upgraded to 11.04 to try it out. I didn't like it, so I decided to restore the backup. Now I can't boot my computer. It gets to a black screen and nothing happens. No error message, nothing. I can still boot from a live USB (which is what I am using now), and I can also boot from a Windows Live CD. I tried using the MBR repair on Windows and reinstalling Grub through the Ubuntu Live USB. Neither of them have worked. Do you have any ideas what the problem might be?
View 5 Replies
ADVERTISEMENT
Jan 2, 2010
I'm trying to restore an image from a 40gb partition(6gb used) to a 100gb partition. I set everything up in gparted and and restored the partition image with clonezilla. In gparted, the partition shows the full 100gb partition with 6gb used, however when I boot windows and open the properties on the C: partition, it shows that it's only 40gb. Is there some setting to restore the partition image and use the full 100gb?
View 7 Replies
View Related
Jan 31, 2011
I've recently begun using PING (Partimage is not Ghost) imaging software, and it works great with other Linux distros. Upon my first use on openSUSE, I found that I could not restore the image onto another computer. After a successful restoration of the image, I get: "Could not find /dev/mapper/isw_ddedgibjfd_ARRAY_part2 Want to fall back to /dev/mapper/isw_ddedgibjfd_ARRAY_part2? (Y/n)" during the first boot. I don't know what to do, I've tried taking multiple images, and restoring them on multiple computers, but I always get the same error.
View 7 Replies
View Related
Feb 5, 2016
I created two debian bootable pendrive with the newest and basic commands: CP debian.iso and SYNC. When I tried to restoring the pendrive GPARTED sees only few space and is unable to perform any operation on the hidden partition as well in Windows 7.
CFDISK is able to see the partitions but is unable to write anything, just deleting. After deleted any partion GPARTED enconters a wrong block size so is unable to perform any changes.
Thus the only way I found to restoring the pendrive is delete the partion with CFDISK and then formatting the pendrive in Windows, where did I do wrong?
View 4 Replies
View Related
Dec 26, 2010
I'm working with Clonezilla to back up my test server, I want to store the image to a partition in our network, for example: my computer. But it still doesn't work. These are my steps:
I reboot my server with Clonezilla CD.
I choose device-image
I choose ssh_server
I choose my network device with dhcp mode
I provide the IP of my computer and port 22, then my username
I choose the path to my hard drive, like /home/username/backup
But after I type my password to connect, Clonezilla says "remote host has disconnected. Clonezilla image home directory /home/partimag is not a mountint point! Failed to mount other device as /home/partimag! Are you sure you want to continue?"
I try to connect to my computer from another machine, it works, but I don't know why Clonezilla can't.
View 4 Replies
View Related
Dec 31, 2009
In 2010 I want to build a new linux box. I currently have a dual-boot system...
IDE1 = WinXP 200GB Master
IDE1 = Opensuse 11.0 Slave 80GB
I have cloned both drives with CloneZilla (CZ) and restored with it aswell. My 80GB is a Western Digital Caviar Model (WD800BB-00JKC0). The drive I'm thinking of buying is a WD Caviar SE (WD800AAJB) [URL]. Will my restore images work with this drive? Its a 80GB but the model numbers differ. Does it make a difference?
View 2 Replies
View Related
Aug 18, 2010
I'm looking for some help on this issue. I have an image (Windows XP) made with CloneZilla of a 160Gb disk (used space = 11Gb) and I 'need' to restore that image to a smaller disk (120Gb). In order to try everything out I created a virtual machine in VMWare. I've tried about every option available in CloneZilla without succes. The latest thing I tried was using dd to just copy over the partition to a created partition on the smaller disk but when booting I got:
Code:Booting...Error loading operating system.Then I thought installing the image to a disk with the same size, resize the partition with GParted and make a new CloneZilla image, but for some odd reason (typical to Windows) when booting I get a BSOD, impossible to read. The BSOD happens when booting from the disk with the same size, before resizing the partition. This also is a virtual machine.Can anyone point out what I'm missing? Or, if anyone has succesfully done this, how did you go about it?
View 1 Replies
View Related
Oct 25, 2010
we have a Win NT4 system used for an important application used at two places. At one place it has gone bad. I want to create an image from good system and restore it at the second location. Is it possible to do this using "clonwzilla live cd"? Does it harm the good system? Can I save the created image to an USB drive?
View 3 Replies
View Related
Apr 23, 2011
I used Clonezilla an older version not the latest to backup an entire NTFS Windows XP drive to DVD last year. I have a series of three (3) of these DVD's but now cannot restore the backup image back to the same PC. The problem is that when booting with Clonezilla I don't have an option to restore from a CD or DVD drive since the computer comes with two working CD/DVD drives that are detected by the BIOS when the POST is displayed. I used one of these drives to boot with Clonezilla and the other one containing the backup image Disk 1 of Disk 3. Clonezilla only detects the two hard drives and a USB drive which is removable. Is there a bug in the restore process because it allowed me to backup the entire image of the hard drive onto a DVD last year but this time around there are no CD or DVD drive options available to choose other then the CD drive Clonezilla was used to boot up.
View 8 Replies
View Related
Jun 21, 2011
I have an Ubuntu server and i've installed drbl-clonezilla to clone and restore pc, I have a 40 gigabyte image to be deployed on other pc's with larger hard drive ex. 160 GB or 240giga, my problem is that when I deploy the image on a larger disk I end up with a disk with a partition of 40 GB and the rest unallocated, how can i restore the the disk and use full disk space, the goal is to automate the process. In clonezilla-drbl there is the possibility to start a "prerun" and "postrun" fonction that could help complete the deployment process.
View 2 Replies
View Related
May 15, 2010
Simple question, which implies lot of complexity, unfortunately : how to install Clonezilla and mount multi-partitions cloned image disk under DEBIAN ?
Wishing that one day Linux would be so easy and complete as Windows. But we are gaining more users, so Linux will have more apps
View 5 Replies
View Related
Mar 1, 2016
I have a Debian Jessie 32 bits machine with standard partitions : one EFI, one for the root system and a swap.
I did a dd image backup of it hard drive thinking i would be easy to restore it or clone to another device... but it seems it is not that simple ! My PC won't boot : no bootable drive found !
I did the same once with a 64 bit Debian Jessie which i fixed using an ubuntu live CD with boot-repair, but here with the 32 bits version it doesn't work : it keeps saying i have an EFI incompatible partition and i should use a 64 bits linux...
Note : i boot-repair from a 64 bits ubuntu live cd. Should i use a 32 bits version ? Because i can"t make a 32 bits Debian live CD to boot, usb key won't show up in boot options (32 bits install CD works fine)
I ha read some things and tried some others but nothing works
Grub and EFI are really obscure for me...
How could i fix my debian 32 boot ?
Or how can i properly clone my debian 32 on other PC ? am i missing something using dd ? should i use another tool ?
View 10 Replies
View Related
Mar 10, 2011
Here is the scenario:
I have triple boot
Win 7 32 bit on hard drive 1
Win 7 64 bit on hard drive 2
Data partition accessible by 3 OSs
Ubuntu 10.10 on hard drive 2
[Code]...
Everything is working great. I'm using Windows Boot Loader (used easybcd to attach Ubuntu).
I want to expand /dev/sdb3 to have more space for Ubuntu. I am able to shrink the data partition /dev/sdb2, which leaves an unallocated space. I have backed up /dev/sdb3 using Paragon software.
My question is, what is the best way to expand the /sdb3 partition into the unallocated space and restore the ubuntu image backup so that it will use up all the space (unallocated and current /sdb3)? I don't want to screw up since everything is working properly, I just want some more space.
View 5 Replies
View Related
Feb 3, 2010
I want to restore a HDD image I have to my laptop's HDD while booted off the Ubuntu Live CD.The laptop's HDD is unformatted and has no partitions.I expected this to work:$ sudo dd if=/path/to/backup.img of=/dev/sdaBut I'm tolddd: opening `/dev/sda': Permission denied.
View 1 Replies
View Related
Mar 31, 2010
I've been running a dual boot set-up with Win XP and Ubuntu 9.10. The old 40 gb drive was showing signs of impending failure, so I replaced it with a new 120 gb drive, after saving an image of the old setup. After restoring the image from the original drive to the new one, Windows boots fine from the GRUB menu, but Ubuntu doesn't. I briefly see the Ubuntu "circle" then the screen goes blank. If I hit any key, I get a console screen of error messages (I can provide details if needed).
I think the problem is caused by the fact that the restore process scaled the saved image to fit the new, larger drive, with the result that the Ubuntu partition doesn't actually start where GRUB expects to find it. I'd like to recover the Ubuntu installation, but if is too big a deal, I'll just wait until 10.4 is released and do a clean install.
View 9 Replies
View Related
Apr 27, 2011
In the event of theoretical anticipated motherboard failure; how would Ubuntu react to dissimilar hardware? In that the Linux kernel contains, as I understand, all the necessary drivers.
View 3 Replies
View Related
Jan 28, 2010
basically put a new hard drive in my old computer and wanted to install fedora on it, downloaded fedora 12 dvd iso (3ish gb in size) have burnt it to a dvd disc, turned my laptop on and set it to boot from cd drive, restarted it, it reads the disc and displays the following message:
ISOLINUX 3.75 209-04-16 ETCD Copyright (C) 1994-2009 H.Peter Anvin et al
Could not find kernel image: Linux
boot:_
The uderscore is flashing and i can type stuff in but have no idea what to type in to find the kernel image, or why it cant find the kernel image.
View 2 Replies
View Related
Apr 18, 2010
I'm getting ready to deploy a Ubuntu server in a remote location. I am deathly afraid of something going horribly wrong though, so what I'd like to do is be able to somehow image the system when it's working, and be able to restore that remotely via SSH if things go to hell. My first thoughts were that I could partition the hard drive, and install two separate instances of Ubuntu. One would be the server in it's working state, and the other one would be a separate instance of Ubuntu that I could boot into to restore an image (if that's possible).
1. If I had two separate instances of Ubuntu on two separate partitions, and I was currently booted into one of them, would it be possible to tell the Ubuntu server to reboot and boot into the other instance of Ubuntu on the other partition over SSH? (SSH is the only form of access I will have to the server)
2. Is there a better way to remotely restore a server than what I outlined above?
3. Also, I've used the dd command to make backups before, but it copies an entire hard drive byte for byte. Is there an argument I can tag on, or another command to use altogether that will only copy the bits that are being used?
View 5 Replies
View Related
Jan 13, 2011
I am looking for an Open Source software making it possible to make a disk image of an Ubuntu installation as well as a Windows XP installation.I have checked out Clonezilla which almost solved the problem. However, the disk to which you restore needs to be the same size or bigger. I want to restore the whole thingo a smaller disk than the original.I am considering getting myself an SSD disk which will be considerably smaller than the 160 gb disk I have right now. I need it to work for Windows as well. Unfortunately I can't get rid of Windows quite yet I often participate in webinars on GotoWebinar and they do not support Linux ...
View 9 Replies
View Related
May 7, 2011
Is it possible like in MS Windows to restore the computer to an earlier date by which all the changes including the installed applications can be removed?
View 9 Replies
View Related
Sep 16, 2010
Right now I have a OpenSuSE 11.1 server running on a single hard drive. I want to install the HighPoint RocketRAID 1740 card and utilize RAID 10.I wanted to know if the following process would work ok:
1. Image the current hard drive using clonezilla and remove the drive.
2. Install the RAID card with 4 hard drives of the same make and model as the current drive
3. Create the logical volume
4. Restore the image to that volume
Since I am restoring the image to a RAID volume, is that completely transparent to the OS? Or do I need to do a clean install on that volume and reconfigure everything?
View 4 Replies
View Related
Jul 27, 2010
I am running OpenSUSE 11.3 GNOME, and I recently reinstalled Windows, and it overwrote GRUB. I only have an Ubuntu LiveCD (I installed with the OpenSUSE DVD), how do I get GRUB back? Note that the Ubuntu LiveCD doesn't recognize the LVM Encrypted partition, so I can't mount it.
View 2 Replies
View Related
Jan 28, 2010
I work in a library and want to set up several newer PCs. I cloned a HD containing Ubuntu 9.10 using Clonezilla. When I put the HD in another computer (exactly the same as the one on which I did the cloning) it will not boot.
After pressing the power button, it proceeds as follows:
BIOS loads "Grub Loading" appears on screen for several seconds Ubuntu icon appears for several seconds Icon disappears and then nothing, blank screen
Regarding Clonezilla, I used the advanced screens but chose only the default settings.
Also, if I boot to the Clonezilla CD on the cloned computer, I can choose the HD and the OS loads without a problem.
View 6 Replies
View Related
Sep 11, 2010
When i boot from Clonezilla it keeps on freezing at the same point.I boot up and select clonezilla live then select the 600X800 (or whatever it is), I then see text scrolling from the bottom of the screen upwards as it is loading the kernel etc but freezes at a specific point for some reason which means i cant clone my drive. Does any have any ideas on how to fix this issue?
View 1 Replies
View Related
Aug 12, 2010
I have a new HP ProBook 4510s, which will probably not run Win 7 which came with it. grin).So I figured I'd image the disk. Clonezilla won't boot. I tried with several CDs. Slax does boot. Ultimate boot CD boots.
View 7 Replies
View Related
Sep 29, 2010
I'm having a problem figuring out how to clone and restore partitions from images on a test host, ie. I have different Linux and Windows images in sda2 that I need to restore on sda1 to run tests.
Here's a typical scenario:
1. On a brand new hard-disk, create two partitions, one to hold the OS to run tests, and a second to hold Clonezilla images
2. Install XP in sda1
3. Boot with Clonezilla Live, and save sda1 into an image in sda2
4. Install Linux: It installs GRUB as boot loader in the MBR
5. Save Linux into an image in sda2
6. Restore XP: By default, Clonezilla doesn't restore XP's boot loader, and leaves GRUB to boot XP :-/
How can I force Clonezilla to restore the boot loader in the MBR (while leaving the partition table as-is), so that Linux=GRUB and Windows=NTLDR always?
View 3 Replies
View Related
May 15, 2010
essentially what the title says. Clonezilla cannot be installed in ubuntu so running a live linux on the usb and installing the applications in that is not an option.
View 2 Replies
View Related
Jul 14, 2010
I am at a loss trying to figure out the options to not show the scrolling boot messages during the boot-up of Clonezilla. Is there a way to have a loading splash screen or even have a static logo that is displayed during the boot process? I have my automated recovery method all ready to go short this one last feature. I have searched all over and am coming up empty on this one.
View 4 Replies
View Related
Nov 17, 2010
I've spent the better part of two days googling and trying out fixes. I've done quite a bit but still have the same issue.I want Ubuntu to be my secondary operating system. As such I'd like Ubuntu to be on the W7 bootloader, not W7 on Grub. This is, mainly, so that I can press power and not sit at the computer to manually select W7.I've tried EasyBCD, many times, but when I select both Grub (legacy) and Grub 2, add it, overwrite the MBR, and reboot, it wipes out the bootloader entirely, and Windows 7 boots up.
View 6 Replies
View Related
Jun 2, 2011
Im running ubuntu 10.10 on a dual boot machine together with vista. When I tried to delete a partition in gparted I accidentaly deleted the general partition table so I had to run testdisk on a live cd to restore it. The problem is that once I had done that and rebooted I get the message bootmgr is missing. I suppose Testdisk deleted or overwrote mz grubloader.
View 9 Replies
View Related
