Simple question, which implies lot of complexity, unfortunately : how to install Clonezilla and mount multi-partitions cloned image disk under DEBIAN ?
Wishing that one day Linux would be so easy and complete as Windows. But we are gaining more users, so Linux will have more apps
I have a 2GB file which is a dd image of a block device. The block device (a USB-connected flash memory) contains multiple partitions, and therein lies the problem. I want/need to access the various partitions in the image file, but need to do this without actually using a physical flash memory device. If the image was that of a single partition, I could simply mount it on a loop device, and access the filesystem as necessary. However, I can find no kind of virtual block device upon which to write/mount the image.
I've searched the net exhaustively for anything that would seem to allow me to do what I need, but without even a sniff of success. Sadly, I have seen bits of information that suggest "you can't get there from here". Even the outstanding dd tutorial by AwesomeMachine on LQ didn't help. Anyone know of a kind of virtual block device on which a multi-partition image can be written and mounted? Or any other way I can access individual partitions (with various filesystem types on each) and then re-assemble them back to a single image?
I'm looking for some help on this issue. I have an image (Windows XP) made with CloneZilla of a 160Gb disk (used space = 11Gb) and I 'need' to restore that image to a smaller disk (120Gb). In order to try everything out I created a virtual machine in VMWare. I've tried about every option available in CloneZilla without succes. The latest thing I tried was using dd to just copy over the partition to a created partition on the smaller disk but when booting I got:
Code:Booting...Error loading operating system.Then I thought installing the image to a disk with the same size, resize the partition with GParted and make a new CloneZilla image, but for some odd reason (typical to Windows) when booting I get a BSOD, impossible to read. The BSOD happens when booting from the disk with the same size, before resizing the partition. This also is a virtual machine.Can anyone point out what I'm missing? Or, if anyone has succesfully done this, how did you go about it?
I work in a library and want to set up several newer PCs. I cloned a HD containing Ubuntu 9.10 using Clonezilla. When I put the HD in another computer (exactly the same as the one on which I did the cloning) it will not boot.
After pressing the power button, it proceeds as follows:
BIOS loads "Grub Loading" appears on screen for several seconds Ubuntu icon appears for several seconds Icon disappears and then nothing, blank screen
Regarding Clonezilla, I used the advanced screens but chose only the default settings.
Also, if I boot to the Clonezilla CD on the cloned computer, I can choose the HD and the OS loads without a problem.
my /dev/sdb contains 2 partitions with fat 32 2 partitions with NTFS 1 partition with LINUX ext3 and a swap linux. I did :
Code:
dd if=/dev/sdb of=image_disk_sdb.img
How can I mount those several partitions
we have a Win NT4 system used for an important application used at two places. At one place it has gone bad. I want to create an image from good system and restore it at the second location. Is it possible to do this using "clonwzilla live cd"? Does it harm the good system? Can I save the created image to an USB drive?
View 3 Replies View RelatedI have an Ubuntu server and i've installed drbl-clonezilla to clone and restore pc, I have a 40 gigabyte image to be deployed on other pc's with larger hard drive ex. 160 GB or 240giga, my problem is that when I deploy the image on a larger disk I end up with a disk with a partition of 40 GB and the rest unallocated, how can i restore the the disk and use full disk space, the goal is to automate the process. In clonezilla-drbl there is the possibility to start a "prerun" and "postrun" fonction that could help complete the deployment process.
View 2 Replies View RelatedOn getting Debian for install, what's the main difference between the CD installation disk and the multi-DVDs?
View 6 Replies View RelatedI downloaded an raw SD card image that has two partitions. It caused some file system errors when I tried to dd it directly into an SD card. I am not sure if the card is defective or the image. Is there a way to examine this image without writing it to a physical card? Like trying to mount the partitions separately or checking the tables?
View 2 Replies View Relatedmy /dev/sdb contains
2 partitions with fat 32
2 partitions with NTFS
1 partition with LINUX ext3
and a swap linux.
I did :
Code:
dd if=/dev/sdb of=image_disk_sdb.img
How can I mount those several partitions?
I am installing Linux on some spare space I left over from my previous two Windows installations.
From within Linux, what's the most risk-free way of imaging these two partitions and saving them to a single image file or archive? I want to preserve the entire partition because I have no idea what I may have forgotten to copy. What is the most suitable program that can do this?
Is there any way to run the partition in a virtual machine at a later date?
After this is done, I want to delete those old partitions and extend my Linux ones.
I'm trying to install debian-6.0.2.1 from hard diskand it can't find my iso image wich is on the slackware partition.i downloaded initrd.gz an vmlinuz,added some lines to lilo.conf so that i can boot but then when it searches for the iso image doesn't find it .
View 6 Replies View RelatedI recently used clonezilla to make a backup image of hdd, before doing factory restore, now the image is of not necessary as I can image the restored computer (Acer Aspire 3620).Is it possible to extract image to blu-ray and make bootable as in live-cd?
View 8 Replies View RelatedIm new to ubuntu. How to auto mount hard disk partitions.
View 1 Replies View RelatedIs it possible to mount a virtual disk image like qcow2 as a rw filesystem? I would assume guestfs could do it, but I couldn't figure it out from the man page. Basically I want to be able to read and write to the contents of a Windows virtual machine, just like I mounted a physical disk.
View 4 Replies View RelatedI have a large qcow2 formatted disk image, which I use as storage. Often I need to move data to and from this disk image. I mount the disk using the qemu-nbd tool as follows:
modprobe nbd max_part=63
qemu-nbd -c /dev/nbd0 /host/disk100G.img
mount /dev/nbd0p1 /home/rup/disk
But disk access fails every now and then in the midst of some I/O operation with an "Input/output error". At that point I have to manually unmount the disk and re-mount it so that I can run the program again:qemu-nbd -d /dev/nbd0umount joborkhaki/What could be the reason for this? Is there a better tool that I can use to maintain a qcow2 disk image?
This probably is something simple, and may have already been addressed on here.I have a 1.4MB floppy disk image file that I would like to mount as a drive.
View 5 Replies View RelatedI am having a rather strange issue. I have windows 98 installed into a disk image that I use bochs to boot it with. I want to transfer some files to the image but now I am unable to mount it. I will attach the drive to the loopback device but when I go to mount I get wrong fs type bad option ... etc.
The command I used to mount was
Code:
#mount -t vfat /dev/loop0 /media/loopdisk
cfdisk shows it ok as does fdisk. shows as a fat16 file system. When I attempt to check it for errors using fsck.msdos I get
Code:
# dosfsck 3.0.6 04 Oct 2009, FAT32, LFN
# Logical sector size (64543) is not a multiple of the physical sector size.
When I boot into windows 98 in bochs and check the disk it tells me there is no problems.
I have a hp laptop with two internal drives and I also have a large USB drive. When I boot normally the internal boot drive is /dev/sda, the second internal drive is /dev/sdb, and the USB drive is /dev/sdc. I used Acronis True image to clone the internal boot drive onto the USB drive. I would like to be able to boot the Fedora 12 instance on the USB drive but do not seem to be having much luck... Here is what I have tried so far... The following is an entry in grub.conf
title Fedora (2.6.31.12-174.2.3.fc12.i686.PAE)
root (hd0,5)
kernel /boot/vmlinuz-2.6.31.12-174.2.3.fc12.i686.PAE ro root=UUID=101b1556-d097-4d85-9bc5-fac2f9abe5d8 LANG=en_US.UTF-8
[code].....
and tried to boot....Got a no such device error.While in grub I tried the grub command setup (hd2) and then got in the bios and set the boot order to USB drive before internal drive.In this case a reboot does nothing I just get a flashing cursor, grub is not entered.
I made a clone of my ordinary disk with Clonezilla some times ago. Now I want to access some files on that cloned disk. Since the cloned disk also has a LVM structure I don't know how to mount it. When I connect the cloned disk I can see both /dev/sdb1 & sdb2. vgdisplay -v gives me:
[Code]...
I'm trying to backup a drive with an LVM2 partition. 8 of the 10 partitions in the LVM restore fine, two do not. SDA1 is the boot partition, SDA2 is an LVM2 partition with 10 partitions inside of it. When I restore the image created by Clonezilla the partition names are there but two of the partitions are unreadable and unmountable. I'm certain Clonezilla is skipping these two partitions because its entire image is around 40G and when I TGZ these two partitions I get an 80GB file. Clonezilla doesn't appear to give any errors and as it "winds up" it shows that it's unmounting the LVM partitions and I see my missing two in its list but when Clonezilla makes the image it never mentions the two I (really) want. I'm trying Clonezilla's DD method right now but it appears to be DDing each partition (going through the LVMs right now).
View 1 Replies View RelatedIn 2010 I want to build a new linux box. I currently have a dual-boot system...
IDE1 = WinXP 200GB Master
IDE1 = Opensuse 11.0 Slave 80GB
I have cloned both drives with CloneZilla (CZ) and restored with it aswell. My 80GB is a Western Digital Caviar Model (WD800BB-00JKC0). The drive I'm thinking of buying is a WD Caviar SE (WD800AAJB) [URL]. Will my restore images work with this drive? Its a 80GB but the model numbers differ. Does it make a difference?
I'm working with Clonezilla to back up my test server, I want to store the image to a partition in our network, for example: my computer. But it still doesn't work. These are my steps:
I reboot my server with Clonezilla CD.
I choose device-image
I choose ssh_server
I choose my network device with dhcp mode
I provide the IP of my computer and port 22, then my username
I choose the path to my hard drive, like /home/username/backup
But after I type my password to connect, Clonezilla says "remote host has disconnected. Clonezilla image home directory /home/partimag is not a mountint point! Failed to mount other device as /home/partimag! Are you sure you want to continue?"
I try to connect to my computer from another machine, it works, but I don't know why Clonezilla can't.
I have long been using clonezilla as my backup/restore software and have never had a problem with it before, ever. Today I backed up my entire disk (windows 7 and Ubuntu 10.10) and upgraded to 11.04 to try it out. I didn't like it, so I decided to restore the backup. Now I can't boot my computer. It gets to a black screen and nothing happens. No error message, nothing. I can still boot from a live USB (which is what I am using now), and I can also boot from a Windows Live CD. I tried using the MBR repair on Windows and reinstalling Grub through the Ubuntu Live USB. Neither of them have worked. Do you have any ideas what the problem might be?
View 5 Replies View RelatedI'm trying to restore an image from a 40gb partition(6gb used) to a 100gb partition. I set everything up in gparted and and restored the partition image with clonezilla. In gparted, the partition shows the full 100gb partition with 6gb used, however when I boot windows and open the properties on the C: partition, it shows that it's only 40gb. Is there some setting to restore the partition image and use the full 100gb?
View 7 Replies View RelatedI used Clonezilla an older version not the latest to backup an entire NTFS Windows XP drive to DVD last year. I have a series of three (3) of these DVD's but now cannot restore the backup image back to the same PC. The problem is that when booting with Clonezilla I don't have an option to restore from a CD or DVD drive since the computer comes with two working CD/DVD drives that are detected by the BIOS when the POST is displayed. I used one of these drives to boot with Clonezilla and the other one containing the backup image Disk 1 of Disk 3. Clonezilla only detects the two hard drives and a USB drive which is removable. Is there a bug in the restore process because it allowed me to backup the entire image of the hard drive onto a DVD last year but this time around there are no CD or DVD drive options available to choose other then the CD drive Clonezilla was used to boot up.
View 8 Replies View RelatedI'm trying to install a multi-disk (cd's) program and I've run into a snag. It's a windows program so I'm using Wine. The installer is asking for the second disk of a two disk set. However, the program won't release the drive so it won't open. I've searched a bit and discovered the command "eject" but it tells me I'm not root so I can't do that. I'm also worried about the consequences of typing a command I'm not familiar with (as root). I don't want to unmount the drive if that will disable it when I'm not confident I could remount it given my lack of expertise. I just want to eject the disk.
I tried the "straightened paper clip in the little hole on the drive" method. It didn't work. It knocks the drive out somehow and I had to cancel the installation to get it working again.
That is my disk
Code:
fdisk -l
Device Boot Start End Blocks Id System
/dev/sda1 1 3724 29912998+ 83 Linux
/dev/sda2 29256 30401 9205245 7 HPFS/NTFS
/dev/sda3 3725 4271 4393777+ 5 Extended
/dev/sda4 * 4272 12104 62918572+ 83 Linux
/dev/sda5 3725 4271 4393746 82 Linux swap / Solaris
I want ot install a new opensuse 11.4 as yest another OS. Due to the fact that I already have 4 sda partitions, I have to make some changes. What I am thinking about is to copy the sda2 (windows recovery) data to some folder etc (nevermind), then delete the sda2. Then I want to create a new primary partition for the new suse 11.4 and install it. What is worying me is the grub boot menu. I was planning to edit the new one (the opensuse 11.4), with old data.
Code:
###Don't change this comment - YaST2 identifier: Original name: linux###
title Desktop -- openSUSE 11.2 - 2.6.31.5-0.1
root (hd0,3)
kernel /boot/vmlinuz-2.6.31.5-0.1-desktop root=/dev/disk/by-id/ata-Hitachi_HTS542525K9SA00_080105BB0F00WDHE41DC-part4 resume=/dev/disk/by-id/ata-Hitachi_HTS542525K9SA00_080105$
initrd /boot/initrd-2.6.31.5-0.1-desktop .....
Now my question is will the settings of (hda0,n), change due to the fact that I have deleted the sda2? I have a lot of unused space at the end of my disk and want to create a new "sda2" there.
how to mount windows partitions in Debian just like in Ubuntu. what I want is to mount disk partitions when I click partitions (just like in ubuntu)
View 4 Replies View RelatedI am a noob at Ubuntu. I currently have 8.04 and I am looking at upgrading to 8.10 and beyond. I want to make a recovery disk with Clonezilla so if something goes wrong with the upgrade I can go right back to where I am now. I have a 16 Gig thumb drive that I want to boot Clonezilla from. Then I want to burn an image to my DVD burner. I am stuck at one point in the process. I am reading the instructions from[URL]..
This part is where I am stuck is step 4.To make your USB flash drive bootable, first change the working dir, e.g. "cd /media/usb/utils/linux", then run "bash makeboot.sh /dev/sdb1" (replace /dev/sdb1 as your USB flash drive device name), and follow the prompts to finish that. My USB drive is named M-S325 so if I enter cd/ media/M-S325/utils/linux in terminal I get the error no such file or directory. I know it is something stupid simple I am doing wrong, but I am stuck. What do I need to do to make my UBD drive bootable with Clonezilla ?