I am running OpenSUSE 11.3 GNOME, and I recently reinstalled Windows, and it overwrote GRUB. I only have an Ubuntu LiveCD (I installed with the OpenSUSE DVD), how do I get GRUB back? Note that the Ubuntu LiveCD doesn't recognize the LVM Encrypted partition, so I can't mount it.
View 2 RepliesI've recently begun using PING (Partimage is not Ghost) imaging software, and it works great with other Linux distros. Upon my first use on openSUSE, I found that I could not restore the image onto another computer. After a successful restoration of the image, I get: "Could not find /dev/mapper/isw_ddedgibjfd_ARRAY_part2 Want to fall back to /dev/mapper/isw_ddedgibjfd_ARRAY_part2? (Y/n)" during the first boot. I don't know what to do, I've tried taking multiple images, and restoring them on multiple computers, but I always get the same error.
View 7 Replies View RelatedTo fix a Windows problem with hibernation, I had to let it overwrite my MBR. I can still boot into openSUSE 11.3 thanks to a wonderful piece of freeware called Plop Boot Manager, but the GRUB menu is no longer in my MBR (obviously).How can I force a rewrite of GRUB to the MBR from YaST?
View 9 Replies View Relatedhad a lvm (non luks i suspect) home partition on my 11.04 install. I've since install opensue on the same laptop hoping that if i don't leave that partition alone during opensuse installation i would be able to mount and enter my key to access the data within...stupid me.... i formated my /boot and / partition, not my /home partition of 450gb. I'm now back on ubuntu 11.04 trying to get access to my data. i'v found the command "encryptfs-recover-private" but i only works on mounted partitons, i can't mount my encrypted partition because the system does not recongnize it. I've have to format it to mount it.
fdisk
(bold is my encrypted partition)
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 96256 83 Linux
Partition 1 does not end on cylinder boundary.
[Code].....
I've lost my GUI while attempting to install the latest ATI proprietary driver. I followed their instructions on how to uninstall it but it didn't give me my GUI back. How do I get back to the default drivers that came with my installation? I have a Radeon 3850.
Booting into safe mode doesn't give me a GUI.
I want to try to reinstall the ATI proprietary drivers eventually. I have them on the hard drive, but I have had no luck installing them using the CLI so far.
I've recently performed a clean upgrade from 11.0 to 11.3 (wipe / partition to ext4, retain /home disk, swap partition etc.) and everything is fine, installed as Gnome distro with KDE3 from repos.Anyway, I've noticed that SuSE will say "doing fast boot" and suspend any console spew until after the kernel has finished with hardware detection and the like. I'd like to be able to see exactly what's happening with the kernel at boot, as I'm quite paranoid and in the event of system failure etc. it would be difficult to view the logs post-boot. Also, my IDE optical drives have a habit of sometimes only being partially detected due to the power line being somewhat intermittent, and I've seen the kernel attempt to re-stablish a link on 11.0, whereas I'd never be able to see that in 11.3 unless I see the console spew, so it would look like the system hanging on "doing fast boot".
Note: I do not want to disable splash=silent, unless spalsh has another option which will give me the desired functionality. I want to have a silent boot, with the option of going verbose with Esc; it's one of the things that I love about SuSE.Oh, and Grub was a nightmare as usual with disk ordering differing at run-time from config file and the total freeze at "loading stage2", so I had to manually fix that. Why does the installer seemingly ignore or revert the specific options I set for GRUB? I understand that the default options for GRUB are ok for single disk users, but my disk ordering is not overly exotic. I stress that this was not user error, as I've had the same issue from going from 10.2 to 10.3 to 11.0, even though they were clean grub installs (rewrites). /rant.
recently I've installed Opensuse 11.4 dual booting beside windows 7 . now I want to restore windows 7 boot to remove OpenSuse 11.4 ...I've tried many ways to remove grub and restore window's boot . I tried bootrec /fixmbr and bootrec /fixboot but in when it comes to the last step it says (cannot find system path )I also tried nt60sys method to restore windows boot and it failed 2 sound like the grub installed is rock solid one
View 1 Replies View RelatedWe are looking for a solution that allows us to restore a servers "identity" in the event of hardware failure...ie Name, IP address, dhcpd, named configs etc.
We have ISO images of the appliance images that contains all the software and stuff. There is no real data on these servers.
If we backup the entire ETC directory and perhaps the /var/lib can we simply restore that and get everything back?
What concerns me is how some versions of Suse use UUID for the network config and the mounts points.
Is it possible like in MS Windows to restore the computer to an earlier date by which all the changes including the installed applications can be removed?
View 9 Replies View RelatedI have long been using clonezilla as my backup/restore software and have never had a problem with it before, ever. Today I backed up my entire disk (windows 7 and Ubuntu 10.10) and upgraded to 11.04 to try it out. I didn't like it, so I decided to restore the backup. Now I can't boot my computer. It gets to a black screen and nothing happens. No error message, nothing. I can still boot from a live USB (which is what I am using now), and I can also boot from a Windows Live CD. I tried using the MBR repair on Windows and reinstalling Grub through the Ubuntu Live USB. Neither of them have worked. Do you have any ideas what the problem might be?
View 5 Replies View RelatedMy Windows installation had a problem and I had to reinstall Windows. The problem now is that I need to get grub back so that I can boot into Fedora. I'm using a Fedora 11 LiveCD I had sitting around. Here are the results of the command most of the way down the first page:
Quote:
Disk /dev/sda: 250.0 GB, 250059350016 bytes
240 heads, 63 sectors/track, 32301 cylinders
Units = cylinders of 15120 * 512 = 7741440 bytes
Disk identifier: 0x000f09ab
[Code].....
I'm tempted to try the grub-install command quoted near the end of the thread, but I don't want to do anything that will hose the system.
I had to install windows for my sister, and I had a 20gb partition there for backup ( /data/ ), and well, that's where I was going for. After reformatting and installing Windows, I try restoring grub and this is what I get:
Code: grub> root (hd0,5)
grub> setup (hd0)
Checking if "/boot/grub/stage1" exists... yes
[code]...
Probing devices to guess BIOS drives. This may take a long time. /dev/hda: Not found or not a block device. Searching for an alternative way to install it, I found that if I 'installed' Ubuntu over my Ubuntu partition, it would automatically restore grub. But when I get to the partition tables, I get a message saying that "The computer has no operating systems on it" and it considers my hard drive as empty.
I have an encrypted filesystem that I've decided I don't want encrypted anymore. Seems the easiest way to do this is simply reformat the filesystem, but I can't. If I try to do it in YaST2 I get either system error code -3005 (unknown) or -3008 (apparently in use). When I try to do it from the command line I get:
Code:
frylock:/home/joel # umount /dev/sdb5
umount: /dev/sdb5: not mounted
frylock:/home/joel # mkfs -t ext4 /dev/sdb5
mke2fs 1.41.9 (22-Aug-2009)
/dev/sdb5 is apparently in use by the system; will not make a filesystem here!
frylock:/home/joel #
It's unmounted, I don't know how to make it any less in use than that.I can't delete the partition because it's not the last logical partition in the extended partition.
I haven't used encryption previously but through that for better security, I would enable it on one of my disks. I went though the process and when done, copied data to the device etc. My house had a powercut the other day and I noticed that the device did not mount automatically upon restart. Unfortunately, I have forgotten the de-cryption password and have lost access to my data. Is there a way of either recovering my password or getting the partition to mount without the password so I can access the data, copy/back up and then re-create the partition without encryption?
View 2 Replies View RelatedAfter update to 11.4, I would like to regain access to my encrypted home that I left intact. Both user.img and user.key files are there, but when I create the same user again in YaST, it does not recognize their presence and it asks again for size of the image. I am afraid it will just overwrite the old image. I do have full backup of hte data, but since its 150GB, I would rather not have to transfer it again.
How can I remount my old encrypted home?
I've been running a dual boot set-up with Win XP and Ubuntu 9.10. The old 40 gb drive was showing signs of impending failure, so I replaced it with a new 120 gb drive, after saving an image of the old setup. After restoring the image from the original drive to the new one, Windows boots fine from the GRUB menu, but Ubuntu doesn't. I briefly see the Ubuntu "circle" then the screen goes blank. If I hit any key, I get a console screen of error messages (I can provide details if needed).
I think the problem is caused by the fact that the restore process scaled the saved image to fit the new, larger drive, with the result that the Ubuntu partition doesn't actually start where GRUB expects to find it. I'd like to recover the Ubuntu installation, but if is too big a deal, I'll just wait until 10.4 is released and do a clean install.
I just upgraded my OpenSuSE 11.2 system to 11.3 and have experienced the following problem:
My hard drive was encrypted beforehand, and after the upgrade(which went smoothly) will no longer decrypt. I type in my passphrase at the prompt, press enter and the start up process never resumes. I am able to access the filesystem from the Rescue System option in the install disk. What's strange is that this worked smoothly on another laptop of mine.
I am trying to open an encrypted home directory from opensuse 11.2 with opensuse 11.3. This means i have a user.img and a user.key So far i have done:
losetup /dev/loop3 user.img
cryptsetup luksOpen /dev/loop3 home
Enter passphrase for /dev/loop3:
No key available with this passphrase. At this point it will not accept my passphrase.
A luksDump reveals:
cryptsetup luksDump /dev/loop3
LUKS header information for /dev/loop3
[code]....
When i try to use the key file, i get:
cryptsetup luksOpen /dev/loop3 home --key-file home.key No key available with this passphrase.
I am having a problem setting up an encrypted home directory with openSUSE 11.3. I used Yast User and Group Management to edit an existing user to encrypt the home directory and the user.key and user.img files were created in the /home directory. I tried it out and logged in as user and created a new file. I logged out and logged in as a different user and was able to see the newly created file in the first users home directory.
I figured I did something wrong so I went back to Yast and deleted the user. I deleted the /home/user directory using file manager su mode. I tried again to create a new user with an encrypted home directory using Yast and now when Yast tries to write the changes I get an error: "pam_mount is already setup for user. Use --replace to replace the
existing entry." I do not know how to proceed from here except to try with a different user name as I do not understand what the error message means and what command to use --replace with.
I've chosen to encrypt my swap partition while I was installing opensuse 11.3 on my PC.
I want to know how I can change its password(passphrase)?
I recently installed OpenSUSE 11.4 64 bit with GNOME yesterday and everything is going fantastic. I like it much better than Ubuntu 10.10 64 bit Maverick Meerkat because it is much more stable, reliable, and dependable. I own a heavily modified ASUS N61JV-X2 notebook PC. I installed OpenSUSE using the LVM based method and LUKS encryption. When I turn on the power to my notebook PC, it asks me for my password to decrypt my Intel 2nd Generation 160.00 GB Solid State Drive. I expected this behavior. However, I never get to see the OpenSUSE login screen. After I type in my password to decrypt my SSD, it loads up the desktop immediately. How do I configure my OpenSUSE so that I can see the login screen so that I can select my standard user profile and enter the user password to login?
View 9 Replies View RelatedI have a Ubuntu server with encrypted LVM2 (logical volumes - /, /var,/tmp,/home etc.). I need to migrate this to an OpenSUSE 11.2 server (cannot use a later version due to the availability of a binary-only module - that is just the way it is). When I fire up the installer, I cannot seem to find an option to mount the encrypted disk (/dev/sda) which has the LVM2 structure. I do not want to lose /home (logical LVM2 volume), so a clean blank slate install is not an option.
View 2 Replies View RelatedI'm guessing that a file is created as a loopback device and encrypted (using LUKS?)
What is the mechanism used at user login to decrypt and mount the encrypted $HOME and to re-encrypt it at logout?
I confess an ulterior motive here - SWMBO has recently got her hands on an Acer Aspire one running Linpus Lite and there's absolutely no security on it
Personally I'd dump Linpus and put on openSUSE but it's her box and she likes the simple interface that Acer have supplied so maybe I can set up the encrypted $HOME as YaST does for openSUSE if I can find out what to do.
First off I'm new to the openSUSE community and would just like to say So, to the issue at hand. I recently switched to openSUSE 11.4 from Debian. I noticed the setup didn't have an option encrypt the home folder like it does in Debian, so not being aware of any other way to encrypt it, I created a new partition, backed up my current home directory, created a new partition and mounted it as home before copying in the contents of the backup to the encrypted home partition I created. Now of course it is askingme to put the crypto password in at each boot, which isn't ideal because it's a family machine and no-one would remember the password but me. Is there any way of being able to automount the encrypted partition without having to put the key in every time? Or better yet an encrypted home folder that doesn't require the key to be put in on each login (as in Debian) without even using a dedicated partition.
View 4 Replies View RelatedI've installed opensuse 11.4 by doing a network install, (boot off kernel + initrd, everything else is fetched off network) and i skipped the bootloader part because i've already got two other linux systems set up with grub2 on my computer. I picked the minimal server install (text mode) and didn't make any other software selectiono changes.
My partition layout is as follows
ssd drive contains / partitions for distributions (GPT layout) hdd drive contains encrypted lvm PV (PV on a luks partition). inside that PV is a VG with volumes for /home and /var (and other), where each distribution has its own /var.
The problem is that i cannot get initrd to open the luks properly. i tried chrooting, rebuilding the image with mkinitrd -f "lvm2 luks" ( i saw that somewhere on opensuse wiki, i think ) and adding boot parameters like this : lvm_box=/dev/disk/by-uuid/<luks partiiton UUID> lvm="box" (where box is the name of the lvm array).
[Code]...
My computer initially had one hard drive, with Debian Lenny 5.0.4 installed. I haven't done any special configuration, so upon boot, I was presented with the GRUB kernel select menu, then gdm, etc. I think I used the Debian installer's 'use entire drive with LVM' configuration.
I then added a second hard drive, with the intention of installing Windows XP on it. After I installed XP on this second drive, I found out that it had overwritten the MBR on the first drive. (It was my intention do use the BIOS' F8-key boot menu to choose between the two drives, each with their own distinct boot loader. The two drives and OS's would be completely independent.)
Using my Debian installer CD, I think I have GRUB installed on the first drive again. I've found a number of tutorials which say I can use 'set' and 'linux' to boot the system, but the linux command always returns a file not found error.
I think my LVM filesystem is still intact, as the Debian installer's fdisk reports it, it can also chroot to it and my installation appears to be intact. 'ls' within GRUB shows (derek-swap_1) (derek-root) (hd0) (hd0,1) (hd0,2) (hd1) (hd1,1) (fd0) . 'derek' was the hostname I used.
I would like to simply restore the system to the way it was before: with the standard GRUB that comes with Debian 5.0.4, which then boots into the debian with my LVM filesystem. Is there a way to do this from the Debian installer CD? (I was hoping there would be a 'dummy install' command which would install GRUB and configure it properly, but leave all my existing partitions and filesystems intact.)
I have recently installed Debian alongside Vista on the same boot menu using the GRUB booting device. Only problem is, I couldn't boot Vista at all any more, so I removed my Debian installation from that drive. But the GRUB boot record persists, I don't have the Recovery disk to restore my old system, so I have to find a way to manually remove the GRUB track and put the old record in its place. I assume there was a copy made of it by the installation program, now my only problem is to find that file and copy the content back in place (at the address at the very beginning of the drive) all that by using Linux code, since that is all I have left. Being new to this game, I have no idea how to begin writing the right command for a job like this
View 3 Replies View RelatedI am pretty new to ubuntu, and not sure if this question has been solved by anyone, I tried search this forum, but didn't find enough information. The closest thread I found here was this one:[URL].. Here is my situation, I have installed Ubuntu 9.04 a few days ago with an old Live CD, after running it pretty well, I upgraded it to 9.10 with the online update tool. (I guess this makes sure I was using Grub 1, the legacy Grub). After updated to 9.10, I installed a Windows XP on my hard drive, obviously, it wiped off my Grub from the MBR. So I tried to restore the Grub back to the MBR, but failed, please see below:I first run the fdisk
Code:
ubuntu@ubuntu:~$ sudo fdisk -l
omitting empty partition (5)
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code]...
openSUSE Install/Boot/Login: I am looking for a Linux distribution with a working LTSP OOTB. LTSP-openSUSE / KIWI-LTSP looks interesting (http://en.opensuse.org/LTSP).
When I boot openSUSE-11.1-DVD-i586.iso, go through the installer, and attempt to use encrypted LVM, I get the following error dialog:
Code:
YaST2
Error Failure occurred during following action: Setting up encrypted dm device on /dev/sda2 System error code was: -3034
i have an external harddrive which i encrypted scince opensuse 10.2 with luks. Now i installed opensuse 11.2 its impossible to me to mount this drive correctly.
the harddrive was recocnized in my former opensuse 11.0 correctly as luks encrypted and during installation yast installed the kernel module and encrypted the harddrive so that i regulay could mount it on boot by giving the password for that harddrive. Scince opensuse 11.2 however yast thinks this is an dmcrypted partitoon and tries to unlock the harddrive using dmcrypt which of course fails.
does somebody know how i can encrypt and mount the externeal drive automaticly?
i have made a backup of /etc before i made a new installation of opensuse 11.2. is the possible to use the old fstab entries for that after installing luks?