I want to restore a HDD image I have to my laptop's HDD while booted off the Ubuntu Live CD.The laptop's HDD is unformatted and has no partitions.I expected this to work:$ sudo dd if=/path/to/backup.img of=/dev/sdaBut I'm tolddd: opening `/dev/sda': Permission denied.
View 1 Repliesim trying to clone my ubuntu system installed in a laptop in case the laptop crashes.
But, first of all: when i try to restore the system in a new PC, could be incompatibilities because the hardware of the broken laptop and the new laptop is different?
I dont mind if i have to buy another laptop with the same processor type (i386, etc), but, for example, the type of the RAM could be cause of problems?
I'm trying to restore an image from a 40gb partition(6gb used) to a 100gb partition. I set everything up in gparted and and restored the partition image with clonezilla. In gparted, the partition shows the full 100gb partition with 6gb used, however when I boot windows and open the properties on the C: partition, it shows that it's only 40gb. Is there some setting to restore the partition image and use the full 100gb?
View 7 Replies View RelatedI plan on creating a backup of my Windows installation using DriveImage XML (unless you have a better idea ) then wiping my hard drive clean, creating a new partition for the backup install to live, and then installing Ubuntu on another partition. Is there a method of restoring my Windows backup to partition 1 by using the live cd? Then of course I can install ubuntu to partition 2.
View 2 Replies View RelatedI need little help on live disk creation and disk image backup.
Can I create live disk using my hard drive installation? If yes then, can I restore the fedora from the live disk to the hard drive. I mean to say that from that live disk can I install fedora again in my hard drive.
Second question is, if I create the disk image of my hard drive( including ntfs & FAT32 partition) , can I restore it in a blank drive. If so , then can os will be restored also?
Several months back I backed up a windows hard drive using an ubuntu live cd and this commanddd if=/dev/hdx | gzip > /path/to/image.gzI now want to restore that image but so far have not been successfulI have tried to restore using this commandsudo dd if=/path/to/file.gz of=/dev/sdb1After some time has passed, the terminal reads23568129+1 records in23568129+1 records out12066882348 bytes (12 GB) copied, 1327.65 s, 9.1 MB/sIf I reboot to windows with the 2nd hard drive connected as a slave. I go to my computer to try and browse the files of the restored HD but when I double click the drive, windows saysthe disk is not formatted.I have also tried sudo dd if=/path/to/file.gz of=/dev/sdbAnd when I do this, the disk does not show up in places/my computer but it will show up in gparted and Disk Management
View 4 Replies View Relatedthe links are my stage of backing up my / and /home, both on different partitions.
short-sum up: with rsync, 2-weekly, manual on an external disk.
viewtopic.php?f=10&t=47836&start=0
viewtopic.php?f=10&t=48582
all my test restores in vbox worked fine. i may use the backup as a second OS, so it works. but there i first deleted the old OS and than ran cp -a /media/backup_partition /media/restore_parititon.
yesterday i ran into trouble and had to restore my system.
mount /dev/sda1 /media/restore
mount /dev/sdb1 /media/backup
rsync -auv /media/backup/ /media/restore
that did work, but not so good. dpkg-errors, all non-repo-apps, like opera and some old thrash, were a mess. i had to reinstall them with dpkg to delete them. besides that the system is up and running, but it was a lot of work.
I'm doing an rsync backup to an external drive in order to take a shot at setting up partition encryption. My rsync command is, as root: Code: rsync -av / /external1/backup.Once I've finished my cryptsetup and done a fresh Linux install, what command should I use to properly restore my backup (without messing up the encryption setup)?
View 1 Replies View RelatedBefore I reinstalled Ubuntu (this time allocating the entire disk to it as I never really used Windows any more) I backed up the entire contents of my /home folder using Deja Dup. Now that I am done reinstalling Ubuntu I am trying to restore the backup. However, when it actually begins restoring the backup, it says "Restore failed: failed with an unknown error".
View 9 Replies View RelatedI did a backup of /photos /documents /downloads and /music with mintbackup creating backup on /dev/sdb1
I cannot get mintbackup to restore the file, and I was able finally to get /music file restored. Below is error from cli
Code:
BoredOOMM@ursa-major ~/temp $ sudo tar xzvf 2011-01-16-1424-backup.tar.gz
[sudo] password for BoredOOMM:
.mintbackup
Music/TheWhistler1947.zip
Music/SUSPENSE6.zip
Music/TheWhistler1946.zip
[Code]...
Here is the scenario:
I have triple boot
Win 7 32 bit on hard drive 1
Win 7 64 bit on hard drive 2
Data partition accessible by 3 OSs
Ubuntu 10.10 on hard drive 2
[Code]...
Everything is working great. I'm using Windows Boot Loader (used easybcd to attach Ubuntu).
I want to expand /dev/sdb3 to have more space for Ubuntu. I am able to shrink the data partition /dev/sdb2, which leaves an unallocated space. I have backed up /dev/sdb3 using Paragon software.
My question is, what is the best way to expand the /sdb3 partition into the unallocated space and restore the ubuntu image backup so that it will use up all the space (unallocated and current /sdb3)? I don't want to screw up since everything is working properly, I just want some more space.
I have been looking for a complete backup solution like "Acronis True Image Backup and Recovery" on Windows for Slackware a while.
View 12 Replies View RelatedI've been using 11.04 Unity, & quite like it. I fired up Blender 2.49b the other day (not used it for a long time) & its behaviour was very erratic. Due to this I decided to reinstall 10.10 for the time being, until October or maybe even the 12.04 LTS. I backed everything up & reinstalled 10.10. I then tried to restore my Evolution from the Natty backup file, which simply didn't work. The message was something about it not being a valid file. I'm assuming this is a non backwards compatibility issue.
Any way getting Blender to work or restoring Evolution? With regard to Blender (in Natty); I've not tried proprietary drivers for my GPU yet as the open source defaults have always been fine, so that's an option. It means another reinstall (of Natty), but that really isn't such a big deal at this point. With regard to Evolution (in Maverick); I found a ppa but I'm unsure how to proceed once I've added it. Would I do an apt-get update & an apt-get install evolution?
I've been running a dual boot set-up with Win XP and Ubuntu 9.10. The old 40 gb drive was showing signs of impending failure, so I replaced it with a new 120 gb drive, after saving an image of the old setup. After restoring the image from the original drive to the new one, Windows boots fine from the GRUB menu, but Ubuntu doesn't. I briefly see the Ubuntu "circle" then the screen goes blank. If I hit any key, I get a console screen of error messages (I can provide details if needed).
I think the problem is caused by the fact that the restore process scaled the saved image to fit the new, larger drive, with the result that the Ubuntu partition doesn't actually start where GRUB expects to find it. I'd like to recover the Ubuntu installation, but if is too big a deal, I'll just wait until 10.4 is released and do a clean install.
In the event of theoretical anticipated motherboard failure; how would Ubuntu react to dissimilar hardware? In that the Linux kernel contains, as I understand, all the necessary drivers.
View 3 Replies View RelatedI have long been using clonezilla as my backup/restore software and have never had a problem with it before, ever. Today I backed up my entire disk (windows 7 and Ubuntu 10.10) and upgraded to 11.04 to try it out. I didn't like it, so I decided to restore the backup. Now I can't boot my computer. It gets to a black screen and nothing happens. No error message, nothing. I can still boot from a live USB (which is what I am using now), and I can also boot from a Windows Live CD. I tried using the MBR repair on Windows and reinstalling Grub through the Ubuntu Live USB. Neither of them have worked. Do you have any ideas what the problem might be?
View 5 Replies View RelatedWhat is best to make a image or a backup.
Whit what for program.
By a image form what partion do i have to make a image.
By backup what directory to backup.
so that when by linux is corrupt i can do a reinstall.
I created two debian bootable pendrive with the newest and basic commands: CP debian.iso and SYNC. When I tried to restoring the pendrive GPARTED sees only few space and is unable to perform any operation on the hidden partition as well in Windows 7.
CFDISK is able to see the partitions but is unable to write anything, just deleting. After deleted any partion GPARTED enconters a wrong block size so is unable to perform any changes.
Thus the only way I found to restoring the pendrive is delete the partion with CFDISK and then formatting the pendrive in Windows, where did I do wrong?
I'm getting ready to deploy a Ubuntu server in a remote location. I am deathly afraid of something going horribly wrong though, so what I'd like to do is be able to somehow image the system when it's working, and be able to restore that remotely via SSH if things go to hell. My first thoughts were that I could partition the hard drive, and install two separate instances of Ubuntu. One would be the server in it's working state, and the other one would be a separate instance of Ubuntu that I could boot into to restore an image (if that's possible).
1. If I had two separate instances of Ubuntu on two separate partitions, and I was currently booted into one of them, would it be possible to tell the Ubuntu server to reboot and boot into the other instance of Ubuntu on the other partition over SSH? (SSH is the only form of access I will have to the server)
2. Is there a better way to remotely restore a server than what I outlined above?
3. Also, I've used the dd command to make backups before, but it copies an entire hard drive byte for byte. Is there an argument I can tag on, or another command to use altogether that will only copy the bits that are being used?
i just wanted confirmation that what i've done should work, here's the deal, i want to make a backup of my entire linux installed system using tar and gzip, tar to keep it all nice and ordered and to preserve the permissions, and gzip to compress the resulting file.
now down to business, i have booted into an arch linux install CD so as to have a command line separate from that of my standard installed system, my HDD layout (as mounts in my installed system) is like this
Code:
/dev/sda1 /boot
/dev/sda2 swap
/dev/sda3 /
/dev/sda4 /home
/dev/sdb1 (unknown partition on external HDD left over from fiddling around)
/dev/sdb2 main storage on external HDD
[Code]...
I've recently begun using PING (Partimage is not Ghost) imaging software, and it works great with other Linux distros. Upon my first use on openSUSE, I found that I could not restore the image onto another computer. After a successful restoration of the image, I get: "Could not find /dev/mapper/isw_ddedgibjfd_ARRAY_part2 Want to fall back to /dev/mapper/isw_ddedgibjfd_ARRAY_part2? (Y/n)" during the first boot. I don't know what to do, I've tried taking multiple images, and restoring them on multiple computers, but I always get the same error.
View 7 Replies View RelatedI am looking for an Open Source software making it possible to make a disk image of an Ubuntu installation as well as a Windows XP installation.I have checked out Clonezilla which almost solved the problem. However, the disk to which you restore needs to be the same size or bigger. I want to restore the whole thingo a smaller disk than the original.I am considering getting myself an SSD disk which will be considerably smaller than the 160 gb disk I have right now. I need it to work for Windows as well. Unfortunately I can't get rid of Windows quite yet I often participate in webinars on GotoWebinar and they do not support Linux ...
View 9 Replies View RelatedI Acer aspire 3620 and would like to backup whole system. My laptop has a 40Gig hdd. Is there a way I can either create an image or copy(clone) to another computer just in case I need it. If it matters I have a spare 40 gig drive on the other computer. The reason for doing this is so that I can try a system restore and if anything goes wrong I want to be able to transfer back. Also if it is posible how could I put it back and be bootable.
View 14 Replies View RelatedI have a a software "Acronis True Image Home".Is it possible to backup CentOS Linux?on Windows do I need to create a bootdisk from Acronis and then boot it up on linux server?I wanted to copy all the files from Server to External USB Hard Drive or via FTP
View 4 Replies View RelatedRight now I have a OpenSuSE 11.1 server running on a single hard drive. I want to install the HighPoint RocketRAID 1740 card and utilize RAID 10.I wanted to know if the following process would work ok:
1. Image the current hard drive using clonezilla and remove the drive.
2. Install the RAID card with 4 hard drives of the same make and model as the current drive
3. Create the logical volume
4. Restore the image to that volume
Since I am restoring the image to a RAID volume, is that completely transparent to the OS? Or do I need to do a clean install on that volume and reconfigure everything?
Image Hard drive Ubuntu Operating system 9.10 Complete back up and restore. Changing over Hard Drives need a complete back up not just save files. So the image can be restored on any hard drive that restores the computer to its original state before it was imaged.
View 14 Replies View Relatedis it possible to boot fedora live cd image from usb thumb drive using grub? im trying to make multiboot usb thumb drive with live option on it, but cant seem to get it to work.trying to load kernel and initrd resulting in this at the end of the fedora loading screen:
Code:
No root device found!
Boot has failed sleeping forever!
Any suggestions would be greatly appreciated!
I recently used clonezilla to make a backup image of hdd, before doing factory restore, now the image is of not necessary as I can image the restored computer (Acer Aspire 3620).Is it possible to extract image to blu-ray and make bootable as in live-cd?
View 8 Replies View RelatedIf I use Clonezilla to backup my Ubuntu partition I get all sorts of problems trying to re-install Grub2 after image reinstall. If I backup the whole HD will this include Grub so when I re-install the image I get the whole thing back again?
View 4 Replies View RelatedI have a fresh install of Ubuntu 10.04 and have configured it the way I like. Is there a way I can make a restore image to use for backups? I know there's software like Acronis for Windows to make bootable images, can you do something similar in Linux?
View 5 Replies View Related