I'm trying to use my iphone in ubuntu (it's jailbroken) and I tried following a couple guides at work to no avail. I JUST installed ubuntu (a clean upgrade) only a few hours ago, and this is the first thing I tried.
I had the same problem:
Code:
I would like to get past this, or have an alternative to putting music on it's stupid ipod application!
IPhone OS 3.1.2, ubuntu 9.10
Whenever I do sudo apt-get or use the Ubuntu Software Center, I can't download anything because a message comes up saying "Action requires installation of untrusted packages: The action would require the installation of packages from not authenticated sources." I've been trying to download GIMP and Thunderbird, so... I dunno what the problem is.
View 8 Replies View RelatedI just upgraded from 11.2 to 11.4 and the installation/upgrade worked just perfect. I than followed the instructions in the "New User How To/FAQ", "Multimedia and restricted format" post. I was following the instruction in the 11.4 section. I added the additional repositories as explained. I then was on the section where it talks about going into software management and selecting the "Packman" repository and clicking to "switch systems packages" to the versions in this repository (packman). I than click this link and the "warning" screen appears and I am present with conflict resolution after conflict resolution dialog. It just seems that there are some many conflicts, it just seems wrong and I canceled.
The installation/upgrade appears to have worked just fine. My mail is there, audio and dvd play back worked the first try after the upgrade. I am not clear if this is what I should expect or their is something wrong or if I even need to complete this step for a successfully installation.
im using fedora 14 and i have a slow internet connection. i want 2 install some packages from the fedora 14 dvd instead of downloading from internet using add/remove packages. i tried to edit /etc/yum.repos.d/fedora.repo and /etc/yum.repos.d/fedora-updates.repo but it dint work.
View 2 Replies View RelatedHOW TO INSTALL PACKAGES IN IT ,IT SHOWS SOME ERROR (Cannot install source packages) OR (No packages were given for installation.)
View 5 Replies View RelatedI am trying to install a Java based game to try it out and i keep getting a crash report can anyone assist me with getting this to work?
Code: Unexpected crash while launching login The error was: <null>
It's possible you might figure out what's wrong from the log file below.
Contents of temporary launch log:
Time is Mon Mar 28 06:40:58 EDT 2011
Running client version 2.7.5g
System information:
Executing from /home/jerry/Documents
Operating system: Linux (arch: amd64, version: 2.6.37.1-1.2-desktop)
Java version: 1.6.0_20 (Sun Microsystems Inc.) <http://java.sun.com/>
Jvm version: 19.0-b09 (Sun Microsystems Inc.) [OpenJDK 64-Bit Server VM]
Available CPUs: 2
Main thread exiting.
CLIENT CRASH
I installed the Warsow pkg just to see what it was.
As I ran it, the resolution went funky and then the laptop froze. Had to hard reset it. Not it will not boot fully. The Ubuntu symbol comes up then it flashes the loading symbol a couple times then goes black. When the hard reset button is pressed the screen goes purple.
I tried recovery mode but startx brought my into another terminal.
I seem to be install heavy. I'd like to figure it out but if I can't fast I'm going to have to reinstall. I've got a paper due Friday, and I don't want to have to work off a live cd for long. Thanks.
Tried to install 11.04 with auto update aplication from 10.10, normal desctop ubuntu, it started out and downloaded fine then i walked away for a while and screensaver came on. when i moved the mouse the screensaver just froze and stayed like that. i waited a while then hard booted. when i turned it on again it had just this command prompt thing that needed my password, i dont know linux commands so it didnt get me very far. its a dual boot so at startup i can choose from a bunch of old versions of ubuntu and an xp which is what i'm on now. i was thinking i could update one of these versions?
View 1 Replies View RelatedI've installed OpenSUSE 11.2 x64 on my Intel Core 2 Quad machine with 8GB of RAM nstallation went perfect. After the main installation, I've installed the XEN-kernel. Booting into the XEN-kernel goes fine.But, now I want to install the first domU (paravirtualized). I use the same installation disk but OpenSUSE 11.2 won't install. It crashes directly. Neither the x64 or the x86 version works.The strange thing is that I can install OpenSUSE 11.2 as "full virtualized".Also, OpenSUSE 11.1 (paravirtualized!) as a domU works perfect!!
View 9 Replies View RelatedI have tried install drivers of Ati ,9.10 and 9.11 always same result black screen, i think problem is information on installation system is on glibc 2.1 but, I have tested and glibc 2.3 and 2.2 are installed, for that the result is :
Unloading radeon module...
Unloading drm module...
[Message] Kernel Module : Trying to install a precompiled kernel module.
[code]....
The crash happened when I was reading a web page and the screen went black and the mouse pinterr dropped to the middle of the bottom of the screen and froze. I had to do a warm reboot to get going again. I'm using 11.4 with KDE.This is the section of the /var/log/messages from around the time of the crash at 16.42/16.44.
View 9 Replies View RelatedAfter installation of Red Hat Linux Enterprise Server 5 on to my desktop computer
i got d below error and it can not booting to next screen, on da sreen displaying dat, code...
memory for crash kernel (0x0 to 0x0) not within permissible range
I've been using Ubuntu for about a year or so and have never had any problems installing it up until now.
I can boot from live CD for 9.10, but if at any point I attempt to install it to my hardrive, it either locks up or the screen goes black. Sometimes I'm able to start the installer, but the screen will go blank. The most progress I've been able to make on the install was up to 98% before it locked up, every other time I've gotten a blank screen or a lock up around 40-60%. After a hard reboot I get an error that reads "DISK BOOT FAILURE. INSERT SYSTEM DISK AND PRESS ENTER"
This problem doesn't only occur with 9.10, but with every other linux distro I've tried on it. My first attempt was with Ubuntu Studio, but I got similar errors. I've searched literally for hours and have found nary a solution that even comes close to solving my problem. using HP Pavilion a404x desktop
My son kicked out power during the install phase of 10.04 (about half complete) and now the system is unbootable.
The boot process dies shortly after starting fsck with the error:
init: plymouth main process (382) killed by SEGV signal
So this looks bad (to me), segmentation violations are never good.
So does anyone have any suggestions for booting and completing the upgrade?
If I'm SOL on this OS image is there a way to image over the OS and save my data?
The only option I see now is to buy a new disk, image onto it, mount my current disk and copy my data. (takes money and time)
Fresh install of Ubuntu 10.04, Gnome session fails to start. Gnome-failsafe and XFCE work great. xsession-errors: [URL].... i also cannot switch between ttys, if i do video becomes blured to the point of unreadable. I think this is an issue with X. I have tried the generic kernel (non-pae) with noapic and apci=off with no results.
View 3 Replies View RelatedI used to have my ubuntu 10.04 running with a virtualbox for a windows xp. I remove that virtualbox and create another one, bigger, with 10gb. On the process, my computer freezes.. now I'm stuck on that initramfs screen.I really need to recover my linux (I have apache, mysql, samba, all up and running).I can reach "grub" booting with right shift pressed, but I really don't know where I have to begin.
View 3 Replies View RelatedUbuntu 10.10 has crashed and I'm resigned to a re-install, however is there any way to recover or access my files via the CD, live, during install or after ?
View 3 Replies View RelatedI was going to install the Beta for Ubuntu 11.04 using the command update-manager -d. Everything went fine accept the fact that I had maybe two other programs running the same time as the update wich made my computer performance get really high wich ended in overheating and that my computer (using a laptop, of course) shut off. When I started my laptop again it will not go any further than the Ubuntu start screen saying something like "The device / cannot be found or is not ready yet". Can I all my files although I haven't done any backup?
View 6 Replies View Relatedmy OpenSuse 11.3 worked absolutely perfect - till now ! It suddenly started not to load KDE, but instead prompts the login screen. When i then log in, it just crashes after a minute or so. I tried to boot in IceWm and it appeared more stable to me, but when i opened a programm like firefox or gimp, this Environment crashed too.
View 4 Replies View RelatedI am having plasma crashes for the past few days. I'm running KDE 4.5.2 and it was all running fine. Then the latest runs of updates happened and now I can't get a desktop. KDE runs but plasma fails to start leaving me with a black screen and a mouse pointer. This happens in both failsafe and normal, with or without a fresh .kde4 folder and consistently! Here's what the KDE bug window tells me.
[Code]....
I installed the last CentOS x86 with Gnome on an IBM Netfinity 5600 Server but after the install, at the reboot, when X start i got many colors bars with the X cursor of the mouse in center of the screen and the server is frozen.I looked if the good display driver was load, and it all right.Booting at runlevel 3, but nothing more.. same problem when i start the configuration or X.By the way, i'm new here so please, don't judge me for my knowledge.Usually I was using Slackware)Here the specs for the server:-2x PIII 800 CPU-1024Mb RAM-6x SCSI HDD 18.5Gb in RAID 5-Graphic card: S3 Trio3D 4MbIs the card too low in RAM to run X?
View 4 Replies View RelatedThis was my first experience with Ubuntu, I was told to switch the hard drives on my computer and put the Windows drive in a safe place for the install. The first time I did the install on the hard drive (which was the clean second hard drive that came with my computer), I either didn't realize I believe I didn't realize I had to click a button and thought the install had gotten stuck, and therefore cut off the install midway through. The second time around the install went without a hitch, and I was able to boot to desktop once. There, I was notified that I needed/should install NVIDIA drivers, I believe version 173 was listed as the next most recent drives (the other was "current"), I have an NVIDIA GeForce 7350LE graphics card, and after installing the drivers, I went to the restart menu as directed and clicked restart, not shut down but restart, and there were several listed errors on the text/DOS screen, shutdown errors I believe (the errors were 5 digits and were something like 56759 or something like that, I can't be certain if I'm remembering right, though, but there were two errors going over again). I then proceeded to turn off the computer manually, and upon it coming on again, instead of the normal Ubuntu flash screen before login, a more choppy Ubuntu 10.10 screen popped up and it led me to the DOS mode, where I was able to login, but it did me no good because I don't know command logic for Ubuntu. The best I did (its the best I ever do when these things happen) is get menus to pop up that are basically useless. I turned the computer off and on again three times, and tried booting directly from disk, but that failed.
I'm actually using the same computer I just reinserted the Windows drive back in after the frustrating experience. Windows has been giving me problems itself, and I really wanted to switch to Ubuntu but I need to know that this is a fluke and not the norm. I can live with this sort of thing being so uncommon I must have did something that was very strange and out of the ordinary to my computer. But if its commonplace, I want to know that too, because that's just something I can't live with.
I downloaded ubuntu 11.04 and did the usual shizz and it was all going well. I went to get a drink and by the time i got back my computer had completely crashed. I cant move the mouse or anything and it is stuck on 'Installing System'.
Ive restarted my computer (unplug), i had to format the harddrive i was installing it on (luckily it was empty already).
I've lost the ability to Install or Un-Install Packages on my Advent 4213 Netbook running Ubuntu 10.04 Desktop Edition. I keep getting an error message saying Previous installation hasn't been completed
The installation could have failed because of an error in the corresponding software package or it was cancelled in an unfriendly way. You have to repair this before you can install or remove any further software.
every time I try to Install or Un-Install Packages using Ubuntu Software Centre. Is there a way to repair my Install without having to resort to doing a clean Re-Install?
I have searched everywhere for the error I am getting which pertains to "E: Sub-process /usr/bin/dpkg returned an error code (1)" I came across this when I was trying to uninstall dovecot through apt. This is what I am doing:
Quote:
# apt-get --purge remove dovecot
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]....
I have tried the following:
apt-get update
apt-get upgrade
apt-get -f install
apt-get clean
dpkg -P courier-pop-ssl
dkkg --remove courier-pop-ssl
None of these seem to work in efforts to unblock what I am trying to ultimately do, which is uninstall dovecot.
I think I've totally destroyed my Suse install, but I have no idea what happened.
I was running Yast's "Create a backup" utility and my screen totally went black and kicked me to the login screen. I was unable to log in, except to a terminal.
So, then I tried to restart X (by typing startx) and I get "Fatal server error: Server is already active for display 0"
I've tried running the repair utility, and it doesn't work. Through a number of commands, I was able to start up a second X session, but that wasn't really much help.
My system just crashed and I had to reboot. The only interesting message I have found in the logs before the crash was :
Code:
2010-11-22 07:49:22 linux-lx7s smartd[2259] Device: /dev/sda [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 114 to 115
2010-11-22 07:49:22 linux-lx7s smartd[2259] Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 61 to 60
2010-11-22 07:49:22 linux-lx7s smartd[2259] Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 39 to 40
[Code]...
So I installed this system with the net install disk. I really don't want to do that again. It said it needed one update shortly after install and I figured that a net install would pretty much be up to date and I would be fine to wait on that for a day or two. Wrong. I used bit torrent for about 20 hours and downloaded ~60 GB's to the external hard drive. After a while while clicked the little update button closed every thing else then hit apply.
Walk off, come back and the computer is completely non-responsive and the monitor is not getting a feed from the tower. Not even any num-lock blinky light action on the key board. I gave it a minute or two to show any kind of life then turned it off. It came back on well enough to get online and post this but, like the title indicates, that package manager appears to be broken in some way. In Debian based systems there is a command that clears this up. Is there an equivalent for this distro?
I attempted to finish the update but got this error:
Code:
installation of package failed.
Subprocess failed. Error: RPM failed: error: package NetworkManager-glib-0.8-7.4.i586 is not installed.
Why not just disable that update and see what happens? That's what I said; heres what happens:
Code:
Installation of package failed.
Subprocess failed. Error: RPM failed: error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index .....
The above pertains to a fire fox update of some kind. I still have the install disk handy but would rather not wait the 3 hours it takes to download the packages. How I can fix this. I switched from Ubuntu to SUSE because it is supported by online learning soft ware I have access to.
Bug-buddy tells me vmware-user crash on every-time I boot up. I don't know what to do about this just pop-up without i changed anything on my machine. I saved a "crash report" on the desktop but couldn't understand what was the "problem" when I read it.
Opensuse 11.3 gnome.
After upgrade KDE to 4.7, I restarted system, when login, the klasma-desktop always crash. can't start.See, below picture:https://picasaweb.google.com/lh/phot...eat=directlinkAnd got below info:
Code:
Application: Plasma Desktop Shell (kdeinit4), signal: Segmentation fault
[KCrash Handler]
[code]....