OpenSUSE Install :: 11.2 Crash As Xen-domU?
Nov 13, 2009
I've installed OpenSUSE 11.2 x64 on my Intel Core 2 Quad machine with 8GB of RAM nstallation went perfect. After the main installation, I've installed the XEN-kernel. Booting into the XEN-kernel goes fine.But, now I want to install the first domU (paravirtualized). I use the same installation disk but OpenSUSE 11.2 won't install. It crashes directly. Neither the x64 or the x86 version works.The strange thing is that I can install OpenSUSE 11.2 as "full virtualized".Also, OpenSUSE 11.1 (paravirtualized!) as a domU works perfect!!
View 9 Replies
ADVERTISEMENT
May 31, 2011
I've setup a server running OpenSUSE 11.4 64bit and configured as a Xen server. I was easily able to install another OpenSUSE 11.4 installation in a DomU and also a Windows DomU. However, I have major issues trying to install CentOS 5.6 in a DomU. For example, if I install right from the DVD, I get a kernel panic using HVM and a "can't find disk, choose disk driver" error using PVM. Some of our server applications require a RHEL5 host distro which is why I'm running CentOS 5.6 for those services.
View 2 Replies
View Related
Feb 9, 2011
problem booting into xen domu. THe console shows this.
[ 1.457957] PCI: Fatal: No config space access function found
[ 1.648029] bootsplash: found, but framebuffer can't handle it!
[ 1.677603] i8042.c: No controller found.
[code]....
View 1 Replies
View Related
May 19, 2010
I am trying to install opensuse 11.2 as DomU on a Host running also opensuse 11.2. When I use a file as destination everything goes well and the installation finishes with success. But when i install the DomU on an LV (Logical volume) with Yast, once the installation finished and the DomU restarts, I get the Error "Boot Loader didn't return any data"
I mounted the LV and I verified the presence of /boot/vmlinuz-xen, /boot/inirtd-xen, menu/lst etc ....
[Code].....
View 1 Replies
View Related
Mar 28, 2011
I am trying to install a Java based game to try it out and i keep getting a crash report can anyone assist me with getting this to work?
Code: Unexpected crash while launching login The error was: <null>
It's possible you might figure out what's wrong from the log file below.
Contents of temporary launch log:
Time is Mon Mar 28 06:40:58 EDT 2011
Running client version 2.7.5g
System information:
Executing from /home/jerry/Documents
Operating system: Linux (arch: amd64, version: 2.6.37.1-1.2-desktop)
Java version: 1.6.0_20 (Sun Microsystems Inc.) <http://java.sun.com/>
Jvm version: 19.0-b09 (Sun Microsystems Inc.) [OpenJDK 64-Bit Server VM]
Available CPUs: 2
Main thread exiting.
CLIENT CRASH
View 7 Replies
View Related
Mar 10, 2010
I have an etch-based Xen server that has several Xen domU's on it. All the domU's are etch or lenny based, but I'd like to install a karmic guest. I use xen-tools to install my domU's - e.g., xen-create-image --debootstrap <etc.>After much googling, I've found bits and pieces of info that have gotten me closer to the goal, but the debootstrap script I have is for hoary (I think etch came with this), and I'm pretty sure this won't work.
If you have been able to successfully install a Karmic guest on an etch or lenny host, I'd be very grateful for pointers.
View 1 Replies
View Related
Dec 2, 2009
I have tried install drivers of Ati ,9.10 and 9.11 always same result black screen, i think problem is information on installation system is on glibc 2.1 but, I have tested and glibc 2.3 and 2.2 are installed, for that the result is :
Unloading radeon module...
Unloading drm module...
[Message] Kernel Module : Trying to install a precompiled kernel module.
[code]....
View 6 Replies
View Related
Jun 22, 2011
The crash happened when I was reading a web page and the screen went black and the mouse pinterr dropped to the middle of the bottom of the screen and froze. I had to do a warm reboot to get going again. I'm using 11.4 with KDE.This is the section of the /var/log/messages from around the time of the crash at 16.42/16.44.
View 9 Replies
View Related
Oct 12, 2010
my OpenSuse 11.3 worked absolutely perfect - till now ! It suddenly started not to load KDE, but instead prompts the login screen. When i then log in, it just crashes after a minute or so. I tried to boot in IceWm and it appeared more stable to me, but when i opened a programm like firefox or gimp, this Environment crashed too.
View 4 Replies
View Related
Oct 26, 2010
I am having plasma crashes for the past few days. I'm running KDE 4.5.2 and it was all running fine. Then the latest runs of updates happened and now I can't get a desktop. KDE runs but plasma fails to start leaving me with a black screen and a mouse pointer. This happens in both failsafe and normal, with or without a fresh .kde4 folder and consistently! Here's what the KDE bug window tells me.
[Code]....
View 8 Replies
View Related
Jan 24, 2010
I think I've totally destroyed my Suse install, but I have no idea what happened.
I was running Yast's "Create a backup" utility and my screen totally went black and kicked me to the login screen. I was unable to log in, except to a terminal.
So, then I tried to restart X (by typing startx) and I get "Fatal server error: Server is already active for display 0"
I've tried running the repair utility, and it doesn't work. Through a number of commands, I was able to start up a second X session, but that wasn't really much help.
View 8 Replies
View Related
Nov 21, 2010
My system just crashed and I had to reboot. The only interesting message I have found in the logs before the crash was :
Code:
2010-11-22 07:49:22 linux-lx7s smartd[2259] Device: /dev/sda [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 114 to 115
2010-11-22 07:49:22 linux-lx7s smartd[2259] Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 61 to 60
2010-11-22 07:49:22 linux-lx7s smartd[2259] Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 39 to 40
[Code]...
View 9 Replies
View Related
Jan 1, 2011
So I installed this system with the net install disk. I really don't want to do that again. It said it needed one update shortly after install and I figured that a net install would pretty much be up to date and I would be fine to wait on that for a day or two. Wrong. I used bit torrent for about 20 hours and downloaded ~60 GB's to the external hard drive. After a while while clicked the little update button closed every thing else then hit apply.
Walk off, come back and the computer is completely non-responsive and the monitor is not getting a feed from the tower. Not even any num-lock blinky light action on the key board. I gave it a minute or two to show any kind of life then turned it off. It came back on well enough to get online and post this but, like the title indicates, that package manager appears to be broken in some way. In Debian based systems there is a command that clears this up. Is there an equivalent for this distro?
I attempted to finish the update but got this error:
Code:
installation of package failed.
Subprocess failed. Error: RPM failed: error: package NetworkManager-glib-0.8-7.4.i586 is not installed.
Why not just disable that update and see what happens? That's what I said; heres what happens:
Code:
Installation of package failed.
Subprocess failed. Error: RPM failed: error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index .....
The above pertains to a fire fox update of some kind. I still have the install disk handy but would rather not wait the 3 hours it takes to download the packages. How I can fix this. I switched from Ubuntu to SUSE because it is supported by online learning soft ware I have access to.
View 9 Replies
View Related
Jun 28, 2011
Bug-buddy tells me vmware-user crash on every-time I boot up. I don't know what to do about this just pop-up without i changed anything on my machine. I saved a "crash report" on the desktop but couldn't understand what was the "problem" when I read it.
Opensuse 11.3 gnome.
View 9 Replies
View Related
Aug 7, 2011
After upgrade KDE to 4.7, I restarted system, when login, the klasma-desktop always crash. can't start.See, below picture:https://picasaweb.google.com/lh/phot...eat=directlinkAnd got below info:
Code:
Application: Plasma Desktop Shell (kdeinit4), signal: Segmentation fault
[KCrash Handler]
[code]....
View 2 Replies
View Related
Oct 7, 2010
My wifes computor crashed during an update with a message to fill in a report. It would not respond to any key presses. The computor has been running 11.3 since it was realeased without problems other than jerky video. The computor will not boot it asks for the password but does not accept it, Although I can see the Home folder it does not mount. I have tried testdisk but although it sees the partions it cannot acess them.
View 5 Replies
View Related
Jan 30, 2010
I like to download the source. I never had like the 1 click install. It no fun. It take out all the fun to install. I know that nVidia is way better for linux. But having a integrated nvidia 6100. Kinda make my keyboard crash at times. I ask my friend parent. And they said they give me there for FREE. So here I am with a Radeon X700 PRO (RV410) (PCIE). I have a x32 bit computer ^.^ and 11.2. But I'm having trouble finding good info on install the driver. So I can used it to play games and such. So I'm asking is, to hit me up with everything I'm going to need to install this right.
View 4 Replies
View Related
Jan 12, 2010
I am meeting some problems on my opensuse 11.2 system in the last week, I see an higher load on CPU and the system seems to swap a lot of time. Checking on dmesg I found that at boot time I have a lot of errors: I paste a little part of the full log at the end of this post
If I am not wrong I have found and installed an official opensuse 11.2 kernel update through zypper some days ago Moreover, actually I am not able to use yast package manager because it seems to crash during repositories refresh (or just after it)
[Code]...
View 2 Replies
View Related
Feb 4, 2010
Im trying to setup multiple domU through the default bridge setup. I am able to access only one of them through the network at a time. If you ping one of the domU it works perfectly but you cannot ping any of the others until you stop pinging the one and even then it takes a bit before you can. Ive looked around for a while and seen similar problems but nothing ever seems quite the same. Im probably missing something really stupid. Or is this the way the bridge is supposed to behave? Do i need to use a routed virtual network?
[Code]....
View 1 Replies
View Related
Mar 5, 2010
I did a full install on 5.4 64bit. the installation aborted with the following errors:
View 1 Replies
View Related
Aug 30, 2010
I use release 11.2 and this one works very well. I try new release 11.3 and my system crash when I wont to start system on runlevel 5. There is Sempron 2 GHz CPU and nvidia fx550 graphics card. Keyboard PS2 does not responds but mouse on USB work well. When I start "safe" boot option system work well. What I can to do ? What I must change
View 4 Replies
View Related
Feb 3, 2010
The graphical login screen is loaded just fine. Though very shortly after (a moment after the loading screen could be seen) it crashes back to the graphical login. And that happens no matter what wm I'm trying - gnome, kde3, kde4, e16, e17, even twm.
It happened after the logout after a zypper up yesterday morning. Looking through the list of what packages were upgraded (two machines, both last zypper up'ed last Sunday, checked on the second one after the problem with the first one), the only packages which might be responsible are kwin or qt4.
The graphics card seems to be fine (NVidia 9600), as it happens whether or not I use nv or the propietary driver. Also tried reinstalling it from the repo as well as using the binary blob from NVidia. Has been tested on Windows and games are running fine there, so it shouldn't be the card.
What is strange, is that when calling upon sax2 -r from runlevel three, the initial screen loads nicely, but sax2 crashes back to the cli once one presses 'Change Configuration'. No error messages are being printed.
Any pointers on how I can narrow down the cause (and get it fixed)?
Packages:
OpenSuSE 11.2 + KDE 4 factory & enlightenment & qt 4.6 repos
X.Org 7.4-35.3
Kwin 4.3.98-406.6
libqt4 4.6.1+4.6.20100202-1.1
[Code]....
View 5 Replies
View Related
Mar 28, 2009
I installed Centos5.2 and have created 1 instance so far. It all works great, but when I created the new instance (using command line from ssh and "virt-install") it gave a message saying probing for video, not found, assuming headless and on I went with the install.
But now I have need for a framebuffer because I have a JBOSS/Java Captcha routine which throws an error if it can't use the X11 libraries or some such (I've resolved this before on a headless Amazon instance once by just running "Xorg"). But I can't run Xorg on my DomU because it can't find the fb device!
So, I searched around and did a makedev -d /dev/fb to create it, but it still doesn't work, because, I assume, the hardware isn't found anywhere. So... how do I get Xorg to work in this case? Or do I need to re-do the virt install and somehow force it to find video hardware (but how?)
Here is some salient output:
root@virty{/etc/X11}: uname -a
Linux virty 2.6.18-92.1.22.el5xen #1 SMP Tue Dec 16 12:26:32 EST 2008 x86_64 x86_64 x86_64 GNU/Linux
root@domU{/etc/X11}: uname -a
[Code].....
View 1 Replies
View Related
Apr 25, 2009
I have a problem with a VM running Centos 5.3 on a Centos 5.2 hypervisor. Any kernel install makes the system unbootable and I have to copy an old /boot directory to get it to boot again. After some investigation I found that grub was always failing. These are the partitions I have. xvda is the OS virtual drive. xvda1 is the /boot partitition and xvda2 is the LVM partition. A standard default install.
cat /proc/partitions
major minor #blocks name
202 0 14648448 xvda
202 1 104391 xvda1
202 2 14538825 xvda2
202 16 195313152 xvdb
202 17 195310206 xvdb1
253 0 11337728 dm-0
253 1 2031616 dm-1
253 2 190840832 dm-2
Apparently, this file could be suspect. But it seems to be OK according to what I have read.
cat /boot/grub/device.map
# this device map was generated by anaconda
(hd0) /dev/xvda
If I try to re-install grub I get...
Attempt 1)
grub-install hd0
/dev/xvda1 does not have any corresponding BIOS drive.
Attempt 2)
grub-install /dev/xvda
expr: non-numeric argument
/dev/xvda1 does not have any corresponding BIOS drive.
Attempt 3)
grub-install --recheck hd0
Probing devices to guess BIOS drives. This may take a long time.
No suitable drive was found in the generated device map.
Reverting to backed up copy.
Attempt 4)
grub-install --recheck /dev/xvda
Probing devices to guess BIOS drives. This may take a long time.
No suitable drive was found in the generated device map.
Reverting to backed up copy.
Attempt 5)
grub
Probing devices to guess BIOS drives. This may take a long time.
GNU GRUB version 0.97 (640K lower / 3072K upper memory)
[Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists the possible completions of a device/filename.]
grub> root (hd0,0)
root (hd0,0)
Error 21: Selected disk does not exist
This is my grub.conf file...
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that all kernel and initrd paths are relative to /boot/, e.g.
# root (hd0,0)
# kernel /vmlinuz-version ro root=/dev/VolGroup00/LogVol00
# initrd /initrd-version.img
#boot=/dev/xvda
default=0
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
hiddenmenu
title CentOS (2.6.18-128.1.6.el5xen)
root (hd0,0)
kernel /vmlinuz-2.6.18-128.1.6.el5xen ro root=/dev/VolGroup00/LogVol00
initrd /initrd-2.6.18-128.1.6.el5xen.img
View 1 Replies
View Related
Apr 7, 2016
We have several systems (DELL-Server PowerEdgde) installed with Debian Jessie 8.4 (physical server and VM) and if the server has big Disk I/O (copy, backup with Backup Exec) the VMs freeze.
Console output:
[168960.072192] INFO: task jbd2/xvda2-8:139 blocked for more than 120 seconds.
[168960.072209] Not tainted 3.16.0-4-amd64 #1
[168960.072213] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[168960.072220] jbd2/xvda2-8 D ffff8803e72946e8 0 139 2 0x00000000
[code]....
The system installed: Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt25-1 (2016-03-06)
I installed Jessie with ext4 and ext3, same error!
View 3 Replies
View Related
Dec 1, 2008
I go Xen on my home server: If I set some settings differently in two seperate guest os, say hdparm settings (Guest1=UDMA4, Guest2=UDMA5), how will xen deal with that ? (given that both are on same physical drive).
View 1 Replies
View Related
Feb 8, 2010
I got this setup:
- Asus M2N32, Athlon X2, 4G Ram, Raid 5
- dom0 on lvm, boots always
- tried to create a domU using dirinstall
- creating a volume lamp in group VGsys with 5G and ext4
- mount /dev/VGsys/lamp /var/tmp/dirinstall
- yast dirinstall: fails when calling dirinstall_finish
- tried to create a domU using vm-install
- creating a volume lamp2 in group VGsys with 5G and ext4
- vm-install fails too
- tried to make an image on susestudio, successfully, but that does not boot, failing when trying to mount the rood partition
- copied the dom0 image to a domU disk
None of these domU booted sucessfully, all of them showed the following messages:
- kernels used 2.6.31.8 and kotd 2.6.31.12 give same results
I am told to disable scsi subsystem in the kernel, I have compiled a kernel before, but
1) I cannot believe I am the only one having this issue or I miss something truely obvious (then what do I miss, please?)
2) dirinstall and vm-install worked in 11.1, there were issues, but recoverable, why now not in 11.2?
View 1 Replies
View Related
Dec 15, 2010
I am trying to install a paravirtualised SLES10 domU in a Squeeze beta 1 dom0. But the Sles distro does not exist in the list in /usr/lib/xen-tools when I run the xen-create-image command. is there a general name to use ?
View 1 Replies
View Related
Aug 16, 2010
I have a XEN DomU VM running Lenny and set up using debootstrap. I also have the TimeWentBackwards issue sorted using: [URL]. The problem is that my cron jobs just don't run. I've set up a cron job that simply echoes a date string to a file as a tester but it's not running. I've tried it under the root crontab, in /etc/crontab and set up in /etc/cron.daily. Is there something I'm missing?
View 1 Replies
View Related
Feb 1, 2009
I'm running a CentOS 5.2 on dom0 and two CentOS 5.2 on domU.The domU use virbr0.I install domU via GUI interface and did not change anything ... the domUcan ping and connect to dom0 but can't access to Internet !!I search google and find someone mentioned that I need to enable IP forwardin dom0 ... I did but my domU still can't access to Internet.What else I need to do ?The routing table of dom0 is:
# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
[code]....
View 1 Replies
View Related
