Ubuntu Installation :: Stuck In Initramfs After Virtualbox Install Crash?
Dec 9, 2010
I used to have my ubuntu 10.04 running with a virtualbox for a windows xp. I remove that virtualbox and create another one, bigger, with 10gb. On the process, my computer freezes.. now I'm stuck on that initramfs screen.I really need to recover my linux (I have apache, mysql, samba, all up and running).I can reach "grub" booting with right shift pressed, but I really don't know where I have to begin.
I have Debian Squeeze with linux-2.6.32-5-amd64Ok, so what I did is first changed fstab ext3 to ext4, rebooted, everything looked good. Then I enabled extents and other ext4 features on my root and home partitions using commands
tune2fs -O extents,uninit_bg,dir_index /dev/sda3 tune2fs -O extents,uninit_bg,dir_index /dev/sda4 then I ran e2fsck -fDC0 /dev/sda3
I downloaded ubuntu 11.04 and did the usual shizz and it was all going well. I went to get a drink and by the time i got back my computer had completely crashed. I cant move the mouse or anything and it is stuck on 'Installing System'.
Ive restarted my computer (unplug), i had to format the harddrive i was installing it on (luckily it was empty already).
I'm trying to install Sid in Virtualbox using debian-testing-amd64-businesscard.iso : Expert install, Sid mirror, Standard system utilities....So far, so good. After that I want to install a minimum gnome, but this time ( I've done it before with success ) I got stuck :
I installed Umbuntu (MythBuntu 11.04 as backend system) and initially when starting it just went to a blank screen (no prompt, nothing). After going through safe mode I was able to get to a prompt and into the UI in low graphic mode.After updating the graphic drivers (nvidea) to the latest and changing some grub options (GRUB_CMDLINE_LINUX_DEFAULT="acpi=off splash") when I restarted it went to the busybox initramfs prompt. I typed "exit" and the UI started up normally.
The next time I restarted it went through to a blank screen. I typed "exit" again and enter and the UI started up normally again (even though I couldn't see what I was typing at the time).While I was going through the recovery mode I do remember some messages about disk not found/mounted, when I googled it I found stuff about entering rootdelay=90 in menu.lst which doesn't exist anymore. Is there a similar option I can enter somewhere in 11.04?Also I'm new to Ubuntu (in fact any Linux distro as an admin), where would I find any log files that may help with finding the problem.
I had Windows XP running fine on Virtualbox, but it's started crashing. This happens instantly when I try to startup the virtual machine. It doesn't get anywhere near booting up. Total crash, no ctrl-alt-del on host. I've tried reducing the RAM and number of processors but it doesn't help. I hadn't changed anything when the problem started.
Virtualbox Version 4.0.12 NAT network Host kernel Linux 2.6.35-30-generic-pae(i686), distro Ubuntu 10.10
it stuck after loading. should got login window. instead it show me a blank page and a blinking courser i can only press ctrl+alt+del it will reboot my laptop n stuck after the loading process
The package manager is scrambled in my Ubuntu 11.04. It started with the repositories list being scrambled with multiple entries. Now when the Package Manager is launched it just accesses the hard drive forever. I did give it a half an hour just in case so it clearly stuck in a loop of some kind.
What I'd like to know is: Is there some way to reset, clear, turn off or de-select the added Repositories list from the command line (terminal.) This seems to be the only way since the Package Manager gets stuck. Keep in mind that I'm only slightly competent with Linux and have no idea where the Debian Package Manager data is located or how it works. If I go poking around without at least some guidance I may make things worse.
The problem seems to be spreading. Got stuck again while saving this message. Turned off the system, rebooted to recovery mode and did a file system check. Okay for now. Switching to clean OS on other partition.
I'll check for answers there but it's only Ubuntu 10.04 and I'd very much prefer to have 11.04 working and not have an effectively dead partition and don't want to loose everything on it with a re-format and 2 day re-install process (no installation disk.)
I am attempting to load 10.10-i386 on a Dell Inspiron. I have created my boot CD and all works fine with the install manager until it gets to the "Who are you?" page. It will not let me advance past this page. I am a complete rookie on Ubuntu and Linux OS.
After installing Ubuntu 8.4 on an old laptop. Double boot w/ XP. I was brought to the terminal with "initramfs". I installed it through the windows partition and assigned it to partition F: which I made sure was reformatted before installation. I tried doing some commands but it seems to bring me nowhere.
Having an issue with a fresh install which gets stuck at partitions formatting 33%. Tried different HDD's, 2 optical drives, 4 sticks of RAM, different SATA cable, disconnect floppy. Have tried both normal and alt cd images using different burn speeds.
I have acer aspire one netbook i'm using ubuntu 10.04 on my desktop but i wan't to install ubuntu on the netbook. i made usb installer ubuntu will run from the usb drive but when i try to install it gets stuck on step 3 of 7. wth? tried over and over again
Trying to install Ubuntu 10.04 on a HP 6540b laptop - dual boot with Windows 7. I keep getting stuck on:
1. [GUI install] after step 3 of 7 where a KB layout (I've tried many other layout) is selected then going next and it hangs there trying to do something.
2. [Alternative install] stuck on 45% of scanning disks at "Starting up the partitioner" code...
I've tried desktop 32bit and 64bit install and also alternative 32 and 64. Also tried installing from CD & USB drive.
I guess it's something to do with the disk partition? Anyone come across this before?
I've installed 10.04 with similar dual boot partitions layout on an older HP 6710b without any issues.
how to install virtualbox on ubuntu 7.04. I tryed to install VirtualBox-3.1.2_OSE from virtualbox.org and following the instructions i have downloaded it using terminal but i dont know how to install it .
Tried to install 11.04 with auto update aplication from 10.10, normal desctop ubuntu, it started out and downloaded fine then i walked away for a while and screensaver came on. when i moved the mouse the screensaver just froze and stayed like that. i waited a while then hard booted. when i turned it on again it had just this command prompt thing that needed my password, i dont know linux commands so it didnt get me very far. its a dual boot so at startup i can choose from a bunch of old versions of ubuntu and an xp which is what i'm on now. i was thinking i could update one of these versions?
I have one hard drive and one operating system on that one drive. No dual boot, no raid, no windows, no usb boot. Just 9.10 installed on one 40 gb drive. After trying the various techniques from this forum, I'm now stuck at Grub loading, error, grub rescue prompt. No menu list to choose from or edit (e).Here is the output of 'sudo fdisk -l'
my error when trying to run a VB (Virtualbox). Error as copied from error box. install the virtualbox-ose-modules package for your kernel and execute 'modprobe vboxdrv' as root. VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).
[code]...
I get this when trying to launch a VB after making one with wizzard.
I have tried to install Debian from various .iso files over the last couple of days. However, the installations always get stuck on "Partition disks" section. On the screen, the progress bar for "Starting up the partitioner" keep getting stuck at 50%, and refuses to progress further. I understand that it might take a little time to scan the hard drive, so as an experiment, I left it on over night. However, it is still stuck there when I woke up 6 hours later.
I bought a new issue of Linux Format magazine and saw it had a bootable disk with Fedora installer/live DVD on it which I was eager to try out "The worlds most advanced Linux distro" I put the DVD in my computer and rebooted it. I selected 'install or upgrade'. It started to load (blasting white text at me). I skipped the media test but then the screen was black and reacted to no mouse moving or keyboard pressing. Not even the OFF button, so I pressed RESET and selected 'install with basic video driver' this time it worked. It didn't fill my whole screen like many 'basic video drivers' but they don't cut off much so I was willing to forgive Fedora using one it was proberly only for the install anyway I could download a new one after. I have a Radeon HD 4200 (extreamly crap) intergrated into the north bridge. I can't afford an expensive graphics card. I build it myself so I can tell you what parts it's got if needed. Anyway I progressed through the setup without problems until I got to the partitionor which defaulted to 'Replace existing Linux system' this would delete Ubuntu an maybe Windows 7. I changed it to custom layout or something like that. It started a partitioner and I remembered I wanted to give ubuntu 30GB more room so I resized it. I created a new 50 GB logical partition and select it as the '/' partition, plenty more space for future Linux distributions. Here's the real problem. Soon after I hit install it said some repositorys require a network connection. It had only one option 'eth0' my motherboard has built in Ethernet but I connect to the net with a wifi card I do not have a cable long enough to reach this computer on the other side of the room. So how was I suppost to continue the setup? I pressed okay hoping it would give up and let me continue the setup but it didn't it said they was an error connecting to the Internet therefore setup could not continue. With only one option: 'Exit Installer'. GRRRR. Interestingly enough after I clicked it the disk drive's light kept flashing but the screen went black forcing me to reboot. Can anyone help me so I can install "The worlds most advanced Linux distribution"*
I am currently running VirtualBox OSE but I need USB support. If I install the closed source version, is it possible to have it use the OSE's virtual machines or will I have to redo all of it?
I'm now on ubuntu and I want to install virtualbox on my system i.e. maverick 10.10. I downloaded virtualbox-4.0_4.0.4-70112~Ubuntu~maverick_i386.deb but there was a problem. My software center says "Cannot install 'libqt4-network". I even did it with terminal but same problem: 'Cannot install 'libqt4-network'.
I've been using Ubuntu for about a year or so and have never had any problems installing it up until now.
I can boot from live CD for 9.10, but if at any point I attempt to install it to my hardrive, it either locks up or the screen goes black. Sometimes I'm able to start the installer, but the screen will go blank. The most progress I've been able to make on the install was up to 98% before it locked up, every other time I've gotten a blank screen or a lock up around 40-60%. After a hard reboot I get an error that reads "DISK BOOT FAILURE. INSERT SYSTEM DISK AND PRESS ENTER"
This problem doesn't only occur with 9.10, but with every other linux distro I've tried on it. My first attempt was with Ubuntu Studio, but I got similar errors. I've searched literally for hours and have found nary a solution that even comes close to solving my problem. using HP Pavilion a404x desktop
I upgrade to 10.10, and now I can't boot normally. The only way I can get X going is if I boot to the previous kernel's recovery mode and choose failsafeX.
I was having a hard time installing Xubuntu on a an old Japanese FMV Biblo LOOX S73A, with no internal drive. trying both from a USB stick and from a CD ( I think the USB's were USB 1's, not sure) but it was finally rolling with the CD---the bios lists USB booting- yet things happen, power shortage and the battery was out-
I'm stuck with a broken Xubuntu intall I have 3 grub options, regular, recovery mode and mem test I've tried to reinstall forcing the computer to boot from the CD in the bios, but get "no os found" If I let it boot from the hard drive, I get to Busybox/initramfs commands that I know nothing of. I just want to do a clean reinstall of the whle thing, but cannot find out how to do so. as mentioned this bios has an option to boot from USB CD ROM DRIVE, hard disk, or floppy
unable to install initramfs-tools error in Karmic I'm having a devilish time installing Karmic on my AMD 64-bit.
Today's missive is: "Unable to install initramfs-tools." "Check /var/log/syslog"
After a trying to fix a corrupted 9.04, I have attempted repeated installs of 9.10 on a completely reformatted clean drive. I can get the live CD working, but when I try the permanent install, using the guided full drive install, it stopped at "Unable to install initramfs-tools." and halts the base system install. I can't find anything on this for Karmic and Launchpad says it was superseded.
Can I skip this and go on? It showed a install list going forward, but if I can't put in the base system, how do I proceed? I've burned 2 9.10 disks, a new 9.04 disk, downloaded 9.10 via package manager while in Live CD and get errors on all during the install process. the check sums match on D/L, but I can't figure how to do a chksum after it's burned to disk. The file sizes do match, but when I go for the install something always halts it at different steps with different errors. No joy.
I downloaded x86-64 hybrid DVD and done everything according to instructions from Installation without CD - openSUSE.After booting from USB HDD, the first page took about 3 minutes to switch menu to the installation media option then afterwards the installation got stuck on Hard drive detection (probably 2 hours before i rebooted into windows 7). Installation scenario is:
Machine: Compaq presario C767TU HDD: 320 GB with Windows 7 Ultimate on root partition, all other partitions NTFS Free Space for Linux: 30 GB (Extended partition) currently having Mandriva 2010 with /swap 2GB, / 10GB,
