When I boot into recovery mode I get fsck from util-linux-ng 2.16 /dev/sda1: clean, 148044/217728 files, 630631/869510 blocks.And then it stops. Booting into normal mode results in an endless hang. I'm not sure what the error means, or how to fix it.I'm running Ubuntu Netbook Remix on a Dell Mini 9.
View 9 Replieshow do I make grub boot to allow me to choose, like safe mode and normal mode and all that second, how do I do automated back ups (preferably using file copy) for something like every sunday at 11:00 am using the command line, i use to know but forgot.
View 1 Replies View RelatedI accidentally chose the "recovery mode" and now i dont know what to do. What commands i have to enter to go back to normal ubuntu mode with graphic etc?
View 9 Replies View RelatedI played with the graphics in kde4 and seem to have losy my installation. i have tried the rescue system option, recover system options and in desperation (i was just about to reinstall) tried booting in failsafe mode, and it worked!
where do i go to find out what the problem is regarding the normal boot mode? i think my pc is starting to resent the continual use of the reset button!
I have installed uec on my ubuntu-desktop through packages and made cc and nc etc on a single machine ..now i am unable to boot my ubuntu.I want to remove the UEC enrty on startup ..what should I d
View 2 Replies View RelatedI'm trying ti boot an xubuntu lice cd 6.06 on a new computer , Intel DG43NB board. I have tried several options at boot with the f6 key and have had no luck at all.It goes to the OK booting the kernel screen and locks up there.
View 1 Replies View RelatedI did a normal Install Updates this morning, but it seemed to hang. Furthermore, after hanging, when I tried to save files it wouldn't let me, saying either the drive was unavailable for writing or write protected or something. Well since I had a Restart Required message, I figured this would be a good time for a restart. It ended up booting me right into BusyBox v1.13.3 after telling me Target file system doesn't have /sbin/init/ and No init found. Try passing init= bootarg followed by a (initramfs) prompt.
I've gathered to mean that my hard drive isn't being mounted; most solutions to this begin with booting from a Live CD. However, I made a Live CD with a USB stick, but when I try to boot from there, the splash screen pops up with the red/white dots moving around, but doesn't continue loading. Pressing an arrow button lets me see the messages "can't open /dev/sr0: No medium found" and "unable to open /dev/sda". If I try going into grub, I'll select one of over a dozen Ubuntu, with Linux 2.6.32-xx-generic options (with and without recovery mode), but again, those end up just kicking me to BusyBox again.
I am in a situation to boot fedora 15 live cd in to command line mode, not graphical mode, for some testing purpose. how to change argument during booting mode
View 4 Replies View RelatedBut when i try the Ubuntu Server Edition, using the same method of burning the iso file i downloaded from ubuntu homepage into a cd, and when i reboot my pc and the screen display the following:ISOLINUX 3.63 Debian 2008-07-15 Copyright (c) 1944-2008 H. Peter Anvin
Loading...Initializing gfx codeand it hang there.Do anyone know what happened? I have verified the file i download and the disc i burnt through MD5SUM.
My Laptop spec:
Intel(R) Pentium(R) M Processor1.86GHZ
1GB Ram, 80Gb Hardisk
OS1: Microsoft XP Home edition SP2
OS2: Ubuntu Desktop Edition
I've installed UNR 10.04 on an old UMPC. Graphics are a total mess, even console text doesn't display properly. All I get is a bunch of pixels, smeared across the screen. I'd blame KMS, but that's only supposed to affect X. Anyway, according to https://wiki.ubuntu.com/X/KernelModeSetting/, "KMS is enabled by default for the -intel, -ati, and -nouveau drivers. It is not available for any other drivers". Mine isn't any of those, so KMS shouldn't be enabled at all. I've found that failsafeX in a recovery console works OK. My question is, how can I get UNR 10.4 to default to failsafeX in normal mode?
View 8 Replies View RelatedI'm posting this in the "General Help" category, because it doesn't really fit in another one. Feel free to move this thread, if it's the wrong place. I'm having a problem with my Linux. Since today, my Kubuntu 10.10 (running on an Dell XPS M1530) doesn't but anymore.
Neither normal, nor recovery-mode is working. I also tried out different kernels in the grub-menu without any success. The boot-process stops at:
Code:
...
...
[2.115441] EXT4-fs (sda2): mounted filesystem with ordered data mode: Opts: (null)
Begin: Running /scripts/local-bottom ... done.
done.
[code]....
Shut down the machine yesterday, got an error booting today. Since I'm new to Ubuntu (been using it for about a month now), I don't know what logs to check, what utilities to run, where to find bootup error message so I can copy here. I am now using it in recovery/low-graphics mode.
View 3 Replies View RelatedI get a blank screen with no progress when I use normal mode, but I am able to get into desktop environment using recovery mode and selecting safe graphics mode from there. Anything I could to do to restore my normal desktop environment.
View 9 Replies View RelatedJust a little disappointed. I downloaded the 11.4 Gnome by about midnight, checked the CD for integrity,and started the Live CD, and it worked quite well. Installed it, but troubles started. OpenSuse 11.4 won't boot up in the normal mode, but would boot up in the safe mode only. I am now writing from the safe mode, but would like to boot up normally. It get stuck after the first verbose page. And not a move from there. The laptop is Lenovo T400, Core2Duo with 4GB RAM, screen 1440x900. No problem with any other distros up to now.
View 9 Replies View Relatedi have to reinstall my pc with a testing version. The installation almost is the same as stable version (lenny). But, the problem is that, i can't login it after the installation completed. The new user i created during installation is invalid! So, i have to enter the single user mode, to my surprise, the new user(i created before) doesn't exist! So, i add a user here.But, i still can't login to my system as the normal mode.How should i resolve such a problem?
View 4 Replies View RelatedWhen I boot from the CD I don't get the normal choices to install. The only 2 choices I get are;
"Try Ubuntu without any change to your computer" and
"Live-Install"
I click on Live-install, and I get a boot loader box that has live-install in it and a OK click box i click ok and nothing happens.
I have a problem with my computer since it's behaving good in failsafe but is bad in normal mode for example I get no wireless in normal mode.
View 1 Replies View RelatedMy HDA NVidia (VT1708S Digital) doesn't work when I login normal user. It works perfectly when I login root.
View 3 Replies View RelatedI have recently installed openSUSE 11.2 on a dell d620. When ever I boot to the default, X seems to freeze and linux crashes. I cannot even hit Ctrl+Alt+F1 to get to the terminal shell.
When it happens, the windows in the bottom turn to a yellow tint color. The windows also become unreadable. The mouse seems to move. I can click the windows, but they are slow to respond and don't seem to correct themselves. When I press Ctrl+Alt+F1 is when the sytem becomes unresponsive and I have to power it off by holding the power button.
When I boot to Failsafe, this problem doesn't seem to occur. Is there a problem booting to Failsafe? What do I lose by doing this?
nVidia Quadro NVS 110M/GeForce Go 7300 Gfxcard and installed the x11-video-nvidiaG02 and nvidia-gfxG02-kmp-desktop packages for my 2.6.31.5-0.1-desktop kernel.
I tried to make Compiz work using the experimental 3D support of the free Nvidia driver, because I am suffering from a bug in the proprietary driver (click here for launchpad entry). The free driver I mean is the one that shows up as "Experimental 3D support for NVIDIA cards" in the "Additional Drivers" manager (note: for some reason, this option will only present itself when no proprietary driver is currently active).
Now the strange thing is: the driver does not provide 3d support, and behaves generally awful (lots of glitches and so on) when I boot my system normally. But when instead I boot from the grub menu into recovery mode, then select "failsafe graphics", and then select "restart X", the whole thing works perfectly! So now I am running the experimental 3d driver, I have compositing working, 3d animations on docky. Somehow, the failsafe boot sequence does something right that my normal boot sequence does not. When I reboot in normal mode, everything is screwed up again.
I have no idea what statistics about my system I should include here, because I really have no idea what could possibly be wrong. I am running 32bits Natty in Classic mode, on an Ahtlon Dual Core 4850e machine, with a GeForce 6150 LE graphics card. These are the normal and recovery entries in my grub.cfg:
Code:
menuentry 'Ubuntu, with Linux 2.6.38-8-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
[code]....
I've installed fglrx drivers with 1click install on openSuse11.3. If I try to boot in "normal mode" I end up in black screen. However if I boot in safe mode, then login and startx, everything works ok
Code:
~> fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Mobility Radeon HD 4300 Series
OpenGL version string: 3.3.10151 Compatibility Profile Context
Shows fglrx works OK, as well as overall performance is pretty good.
I've done
Code:
aticonfig --initial
radeon drivers is also blacklisted
but running (if it means something)
Code:
# depmod -a; lsmod | grep radeon
radeon 868858 0
ttm 64561 1 radeon
drm_kms_helper 32944 1 radeon
drm 221516 3 radeon,ttm,drm_kms_helper
i2c_algo_bit 6728 1 radeon
I've been installing proftpd on a server running fedora 8. It is setup in standalone server type, and I checked that the process is running and listening to port 21.
When I try to login using a ftp client in Normal mode with root user & password , I receive first a 220, then a 530 login incorrect error.
Can you help me?
I've been pasting my proftpd.conf configuration file below
Code:
I just read through the Lifehacker article on how to create a Linux boot from USB and thought it would be a good idea for when I want to use a light system on my netbook. Anyways, I encountered some problems when trying to boot the first time on my netbook. I got an error before it was loading up "Error: idle with IF=0" but everything ended up booting normal; however, I couldn't find my wireless connection.
Well, then I decided to boot up my other laptop with it and then was going to install the OS to my external hard drive; however, it never did find any storage devices (after I let it sit and load for about 10 minutes).My last question/issue is wondering if I can install it to my main hard drive and boot either WIndows XP/7 or Fedora instead of just one or the other. FYI, I was running the boot from a 4gb USB drive.
I'm using a system with nvidia graphics card gt220 with driver version 190. I tried installing mplayer and that installation procedure upgraded my nvidia driver. The installation was not successful and it gave an error that there are some broken packages. I ignored that warning and shutdown the system. When i tried to boot again after some time, it took me to a terminal instead of login screen.
I tried to recover the system using "report broken packages" option from recovery mode. I could able to delete all the broken packages. After removing all the broken packages, i tried to install nvidia drivers using command "apt-get install nvidia-glx-190".
I just installed Ubuntu 10.10 on a machine with a dodgey graphics card. This machine will break on normal graphics mode but run fine in failsafe graphics mode. I need this machine to be able to be controlled remotely and this is where the problem comes in.
If this machine is being controlled remotely, it may need to be rebooted remotely. Rebooting it into failsafe mode at the moment consists of two prompts: one to put it into failsafe, and the other to "keep it for one session". Does anyone know how to reconfigure Grub or whatever else so it will automatically go into Failsafe Graphics mode without any user interaction? (BTW, where it asked me to "keep for one session" or "reconfigure now", I clicked reconfigure and it didn't do anything. So I need to do it manually)
Does any one know how to force the usb ports to work under low graphics boot mode? The mouse and usb memory stick both do not work.
View 2 Replies View RelatedIs there a button I can press when booting to log into a 'safe mode' ? Like f5-f6 does on windows? Or a command prompt? My ubuntu fails when it loads X and cant get out of it, is there something I can do to allow me to log into the system to see whats the problem or revert it back to the old settings?
View 2 Replies View RelatedI cannot get my driver to work in 10.04 LTS. I've googled all around and still can't fix this. Randomly when I boot up it says ubuntu is running in low graphics mode. It was working yesterday. I had this problem before and it just randomly fixed its self. I have an Nvidia 320m graphics card with drivers from the hardware drivers program.
Heres my xorg.conf file ...
Code:
Section "Screen"
Identifier"Default Screen"
DefaultDepth24
EndSection
Section "Module"
Load"glx"
EndSection
Section "Device"
Identifier"Default Device"
Driver"nvidia"
Option"NoLogo""True"
EndSection
I upgraded from 10.04 to 10.10. When booting, there is this "Ubuntu" writing on purple background and dots which are lighting up in order. On my machine this is in text mode. In 10.04 it was graphical. What can I do to have it again graphical?
View 1 Replies View Relatedhow I might try using Recovery Mode to fix whatever is wrong? When i'm booting, I no longer get the gui login prompt. Instead I get a Terminal-like login prompt. I can login and everything but I'm a noob and don't know what to do. I booted to recovery mode and selected fix broken packages but this didn't fix the problem. is there anything else I can try?
View 5 Replies View Related