I upgraded from 10.04 to 10.10. When booting, there is this "Ubuntu" writing on purple background and dots which are lighting up in order. On my machine this is in text mode. In 10.04 it was graphical. What can I do to have it again graphical?
View 1 RepliesI installed fandora 14.I modified "/etc/inittab" for change "text mode".
id:5:initdefault:
to
id:3:initdefault:
And I want to disappear the booting logo splash. Beacuse I want to see kernel messages at the linux booting.
I have a question regarding to the Graphical Splash Screen. Is their a way to show the text based startup on booting your OS? So. I don't the OpenSuse Background with the loading line. But i want the half transparent black background if possible or just the black background with all the loading texts. The black and white screen.
View 9 Replies View RelatedWhat happened was, i used sticonfig to attempt to OC my graphics card, it all seemed to work well, then i put some stress on the card and got a 'black-ish' screen. No matter i though i will boot into text mode (How do you do it normally? The only reason i could was because i crashed my system and could choose recovery mode to then choose text based) and change it back to default and it will all be fine, woo... But apparently you need to be in X server for that command to take effect. ****...........
How do i get into text mode from booting up?
How can i fix this?!
I have tried looking in BIOS but there is nothing there. Have i just fried my card? (It was close to max settings - although only on full load for like 1 second) Could booting up normally, and just 'going in blind' work, like opening up terminal with a hotkey and just entering the command from there....
Ubuntu 10.10
PowerColor Radeon HD 5870
Ati catalyst drivers installled
I have the following trouble when I try to install Fedora 10 with a USB Flash Drive created by Fedora LiveUSB 3.6.3 [url]...ator-3.6.3.zip in a HP Mini-Note 2133 Notebook.
Everything looked ok during install, restarted the PC, get the booting count down and splash screen.
After some seconds then get this:
I'm using in the server 8.4 and installed the package startupmanager which is GUI, through this package I can show the text during boot, unlike in the 9.10, I checked the "show the text during boot" same I did in the 8.4 bu It's not showing the text and still show the splash...
how to change it direct from shell instead of the stupid GUI
Can you give me a step by step screenshot procedure in installing Fedora Version 8 64bit?
View 6 Replies View RelatedI received the Ubuntu CD by mail the other day and tried to install a dual boot with it. I first tried it out by running from the CD and the first problem I had was the screen froze after the splash screen. So I lurked around for a bit and found out that I can press any key on the screen with the keyboard and person to get to a different screen. At this screen I entered "F6" and then entered "nomodeset", this allowed me to pass the splash screen.
Next, I got into Unbuntu but I found out that the keyboard and mouse weren't working, so I lurked again and found out that I have to enter "noacpi" (sorry if I got that wrong, I forgot the name ). I ran by CD once more and everything worked, so I decided to finally install it next to my Vista. However, after installing it goes straight to the splash screen, and the freezing happens again. The screen where the keyboard and the person are not showing up so I have no idea how add the "nomodeset" and "noacpi". So my question is, how do I get to the screen where I can add both those things? Also, is there a way to add it permanently so I don't have to keep pressing F6?
It seems I had no say in the matter. The installer automatically did text mode and it starts up in text mode now. I'm very new to Fedora, though I had Ubuntu installed recently but removed it because Fedora seemed a little more interesting to me. I'm on an HP Pavilion dv2807nr laptop if that helps.
View 14 Replies View RelatedI tried installing Fedora 11 on my i386 using the 6 CD set that I downloaded. Since my system has only 128M of RAM, the text install mode was used. The 1st CD installation seemed to work OK. After 181 out of 181 packages were installed, the system rebooted and did not ask for me to insert the other CDs. now when my system comes up, it is always in text mode.
Q. Is there a command I can use to have the remaining CD's installed so I can install the graphics system?
I made a clean installation of F15 on my laptop, is a Qosmio x505, it has an nvidia M360, so I download the nvidia drivers and intall it separatly.To install the nvidia drivers I change the runlevel with the commandln -sf /lib/systemd/system/multi-user.target /etc/systemd/system/default.targetAnd then, change it again to the graphical mode with the commandln -sf /lib/systemd/system/graphical.target /etc/systemd/system/default.targetEverything seems ok, but the system only boot in text mode. I can load the Gnome with the command startx without problems, but how can I made that it loads the Gnome automatically?
View 2 Replies View RelatedI have just been using distro's that install with a graphical interface, but some of the distro's forum members recommend are installed text mode only. How difficult is a text mode install
View 9 Replies View RelatedI just bought a new Toshiba Satellite C650D which has AMD processor. For some rescuing, I wanted to put ubuntu live CD. Ubuntu starts with some screen but then it converts to text mode and just sit there. I have checked md5sum of the iso file I got , before burning it on the CD. After burning the image, I also checked the directory structure on the iso file and the CD. They are fine. Currently I am writing this from XP. How do I use Ubuntu Live CD.
For burning, I used infrarecorder with 'Burn Image' option. I had installed debian and win xp with the same CD , so I can't see the problem with the CD. Anyway, I tried doing this with different CD and the same problem appears.
The CD's are memorex
CD-RW 700 MB 4X multi speed.
And I don't get the ubuntu boot screen at all. Some screen with ubuntu symbol appears and then text mode with some information about the hardware and it hangs there.
I'm some what new to ubuntu and i would really like to start using it as my main operating system and get rid of windows. The first problem i face here is that I am unable to install Ubuntu using the normal gui mode.As soon as i select the option to install ubuntu the files starts loading and then the screen goes blank.. but the monitor is still live. So i installed ubuntu using the text based installer.. everything went fine, i installed the system and at boot loader i selected my Os but still the old demon comes in "Blank screen". I've tried all the related forums and tried all the options best to my knowledge, but its still the same.. I am not even able to get a command prompt/terminal. I know that this is a problem with my ATI (i can hear the sighs!!!!!) video card. Now I know that Ubuntu is being loaded cause i can hear the welcome sound of Ubuntu(drums sound).
View 2 Replies View RelatedI wanna install Fedora 10 in text mode and use it in text mode. So i wanna know what kinda packages or software i should exclude when installing to save some time and space.
View 1 Replies View Relatedim currently using a RHEL5 RIS server in my Lab to deploy rhel5 for all my systems. everything has been configured and installation works fine, but i am not able to run the installation in text interface mode. when i type "linux text", i get an error saying invalid kernel parameter. i'll paste my /etc/dhcpd.conf file here. please have a look and let me know what changes i should be making in order for my text interface installation to be working.
View 1 Replies View RelatedI did a text installation of the Minimal Install CD of 9.10 (Karmic) and wound up with a console only. I installed Icewm, how to boot to graphic (GUI) mode.
View 5 Replies View RelatedIt has been a few days I'm struggling to install Kubuntu 10.10 on my computer. I started with the normal CD, burnt it and boot the computer. Halfway through the graphical installer, I got a black screen and system froze up. I tried several things (including running the installer with nomodest and single options) but didn't help.
Then I downloaded the alternate CD and started to install in the text mode. I could get passed installing the kernel and programs but right after adding a user/password, the text installer crashed with a black screen and system froze!
Now, I already have Windows 7 64 bits on this computer and have done all kinds of memory/hardware tests on it and it works fine. The CPU, GPU and the case is well ventilated so nothing is overheating. I also run heavy loads on Windows (MATLAB, Chess engine tournaments) for hours and hours and never had a crash. So I guess the hardware is fine.
Here are the specs of the system if it can help:
CPU: i7 950 GPU: ATI HD5870 (model Gigabyte GV-R587UD-1GD) RAM: 12 GB DDR-1666 Motherboard: Gigabyte GA-X58A-UD3R (rev. 2.0) Optical drive: Liteon ihbs112 USB Mouse and Keyboard
Windows is installed on a SSD and I have 2x 2.0TB hard disks for data. Kubunto, however was being installed on a separate and dedicated 200GB hard disk. During installation process I format and partition this drive. I didn't disconnect/disable the other drives. In BIOS, all SATA controllers are set to run in AHCI mode.
My primary suspect is the graphics card. However, why it would ever crash even in the text mode? Although it works fine in Windows even with heavy gaming so graphics card is itself stable.
So I decided to try Ubuntu from a live USB drive 10.04 LTS on my Toshiba laptop as the windows Vista SP2 was running really slow. I liked it and clicked on the install icon. From there I set it for duel boot and off it went. The install worked great. I then downloaded the startup manager and changed the start up to be default of windows loader. Now when it boots into windows it goes to the windows recovery thing and won't start windows.
View 9 Replies View RelatedThe system always boot up in Graphic Mode. After installation of Web Server, I want to disable Graphic Mode and change it to boot to Text Mode to save memory. Is there a way to disable graphic mode?
View 1 Replies View RelatedOn some computers I can not use graphical installation interface of Fedora 9. So I use text mode.I would like to have a very small installation with very few installed packages, so at package selection I uncheck everything. In text mode installation there is no option to customize installed packages down to package names. I can only check main themes.So I uncheck everything and installation starts. This method results over 400 packages to bo installed... This is too much with many unnecessary packages.If I use graphical interface and uncheck every package name at custom package selection then about 150 packages will be installed.Is there any good way to use textmode installation and don't install more than 400 packages?
View 2 Replies View RelatedSince the kernel of F11 live-cd can't recognize my video card, I have to run it in text mode. I also have to run "liveinst" in text mode and the install progess seemed ok. But on the partitioning selection step, there is no "custom layout" option! I rembered that in the graphic mode there was such option. How can I find it in the text mode?
View 2 Replies View RelatedI install Fedora10 in my computer but when it begins the process of installation, it says that "x startup failed" and falls to text mode of installation. Howerver, the graphic mode works in another computer.
View 1 Replies View Relatedwhen I tried to install Nvidia driver for my computer, and when I reboot it, I found i can not log into the x-window mode as the screen display freeze at the point where suppose to be login screen. so use grub go to text mode, try to reinstall the akmod-nvidia xorg-x11-drv-nvidia-libs.i686, but it failed, sames i don't have internet connection to retrieve it. how can I start my network connection under text mode?
View 13 Replies View RelatedI am in a situation to boot fedora 15 live cd in to command line mode, not graphical mode, for some testing purpose. how to change argument during booting mode
View 4 Replies View RelatedI trying install fedora 12 in text mode, but every time the system crash, i cant install in text mode. Someone have one solution ?
View 1 Replies View RelatedI have an older PC that was running F11 without any problems. At some point I started updating to F12 through the web and got a a nice black screen that pretty much hosed my OS. (Not a big deal).So I went and downloaded the F12 Live CD which did the same thing.., at some point just after install the screen would be black and reset is the only option.Got the full F12 32-bit DVD and during the installation I get: "X Startup Failed,Falling back to text mode."Finishing the install I get to a nice black log-in prompt so I can log-in as root.From there I cant do much as I am a n00d in Linux to some extent and my network doesn't work
My video card is a Geforce FX 5200 which installed and worked just fine under F11 (without me doing anything but basic install and Ubuntu 9.10)
I think it should be that the splash comes out immediately after one click ubuntu to boot in grub. just like that in windows....
But always it's black with a cursor twinkling before the splash comes out.And in fact it holds most of the boot time in the black screen.When splash comes out it just exists less than one second and immediately goes to the login window.
Though ubuntu lucid is very very wonderful now , i want it to be better .
I would like to modify the splash screen that you see when booting up Xubuntu 10.10. I want something light. What dimesions should I have it at like 800X600 1280X768 and etc. I will be using this on many different resolutions. Also where does the splash reside on this build?
View 2 Replies View RelatedHow do I change boot splash in fedora 15 fallback mode.
View 2 Replies View Related