Ubuntu :: Usb Does Not Work When Booting Into Low Graphics Mode?

Aug 12, 2011

Does any one know how to force the usb ports to work under low graphics boot mode? The mouse and usb memory stick both do not work.

View 2 Replies


ADVERTISEMENT

Ubuntu Multimedia :: Nvidia Keeps Booting Into Low Graphics Mode

Oct 4, 2010

I cannot get my driver to work in 10.04 LTS. I've googled all around and still can't fix this. Randomly when I boot up it says ubuntu is running in low graphics mode. It was working yesterday. I had this problem before and it just randomly fixed its self. I have an Nvidia 320m graphics card with drivers from the hardware drivers program.

Heres my xorg.conf file ...
Code:
Section "Screen"
Identifier"Default Screen"
DefaultDepth24
EndSection

Section "Module"
Load"glx"
EndSection

Section "Device"
Identifier"Default Device"
Driver"nvidia"
Option"NoLogo""True"
EndSection

View 6 Replies View Related

Ubuntu :: Ati Graphics - 10.10, OC'ing - Get A 'black-ish' Screen - Get Into Text Mode From Booting Up?

Dec 31, 2010

What happened was, i used sticonfig to attempt to OC my graphics card, it all seemed to work well, then i put some stress on the card and got a 'black-ish' screen. No matter i though i will boot into text mode (How do you do it normally? The only reason i could was because i crashed my system and could choose recovery mode to then choose text based) and change it back to default and it will all be fine, woo... But apparently you need to be in X server for that command to take effect. ****...........

How do i get into text mode from booting up?
How can i fix this?!

I have tried looking in BIOS but there is nothing there. Have i just fried my card? (It was close to max settings - although only on full load for like 1 second) Could booting up normally, and just 'going in blind' work, like opening up terminal with a hotkey and just entering the command from there....

Ubuntu 10.10
PowerColor Radeon HD 5870
Ati catalyst drivers installled

View 2 Replies View Related

Ubuntu :: 3D Acceleration Does Not Work - Low Graphics Mode

Sep 4, 2010

For some reason after updating, somewhere my system is messed up where my 3d acceleration doesn't work. I found a workaround though, I can get it to work when I reboot, and manually select my OS at the grub2 menu by pressing enter. It doesn't work all the time this way, but most the time it does allow 3d acceleration to work almost normal. If I let the grub2 timer count down to auto select it will never be 3d accelerated, and prompts me it's going to run in low-graphics mode and I'm given an option to Restart X. Ok that's one part of it...

Now with my workaround say I got 3d acceleration to work, when I go to System > Preferences > Appearance : and for Visual Effects I select "Normal" (was on none). It will apply fine, until I reboot it gets set back to none. So I'm having to manually put everything back (graphics) every time I boot, this is a horrible bug. Then onto another aspect of this wonderful update. All my letters and numbers on the keyboard are normal, except when I use control and ALT, they don't seem to be mapped correctly because I can't use any of my Keyboard Shortcuts.

View 9 Replies View Related

Debian :: Getting Graphics Mode To Work

Aug 15, 2010

I decided to use Debian for my system at work, and while trying to set up the system this weekend I've run into a major problem trying to start X11. I'm not very experienced with Linux, so there is probably going to be some huge gaps in my knowledge as I've only used Ubuntu on my netbook with only a little terminal work, so bear with me. As background info I'm using a Radeon HD 4350 and an nForce 4 board with an Athlon XP 3200 ( I think). Yeah it's some ghetto hardware but it's good enough for what I need to do at work.

Anyway, I successfully install Debian using disc 1 here, and did the Advanced Installation. As a note, I installed Debian once using the standard install, but I was trying to run a few X commands that I only found out after reinstalling need to have X-server running, which it obviously isn't in single user mode. This shouldn't be an issue since I rewrote the partition table and am not using the drive for anything else. After the install finished and I restarted the computer, after the kernel loaded my screen shows wither "Not Support!" or "Input not supported." depending on which monitor I'm using. The first message comes from a cheap Japanese tv so the engrish is understandable, but from what I can tell it's the same error message for both. First guide I tried following was this one. I completed all the steps, and my xorg.conf is currently set at those values. For people who don't want to read through the whole thing:

[Code]...

View 1 Replies View Related

Ubuntu :: Using Safe Graphics Mode It Doesn't Work?

May 29, 2011

This is the crap I get when I try to use Google Earth (see attachment please). I've tried using safe graphics mode-- it doesn't work. When I installed it it says it was not a trusted package and now that it's installed, I cant find it in Synaptic Package Manager nor Ubuntu Software Center. I originally downloaded it as a deb from google.

View 9 Replies View Related

Hardware :: Ubuntu Is Running In Low Graphics Mode And Ubuntu Stops Booting?

Feb 21, 2011

I have Ubuntu 10.10 and when I boot my PC I can see the following message: Ubuntu is running in low graphics mode and Ubuntu stops booting. I can-t boot in it I can only use command line.I think I accidentally uninstalled some packages clicking at completelly removal at some ipod utillities in synaptic.

View 10 Replies View Related

Ubuntu Installation :: 10.04 64bit Low Graphics Mode Cannot Get Display To Work

Aug 19, 2010

I had some crackling sound I thought I would remove some ALSA drivers and re-install them. Somehow, in the process, my computer rebooted itself and I am stuck with the classic "ubuntu is running in low-graphics mode".

Attempting to actually get graphics does not work. A CTRL-ALT-F7 yeilds the ubuntu loading screen with dots filling but it stays there eternally. I can however access my console login and am able to execute terminal commands.

I have tried a few things to no avail such as:

sudo apt-get update
sudp apt-get install nvidia-current

I run a Nvidia Geforce250.

View 1 Replies View Related

CentOS 5 :: Graphics Card Can't Work After The System Resume From 'suspend' Mode

May 18, 2009

My computer have ATI X600 graphics card installed, and I installed CentOS5.3.

Every time I suspend my computer and then resume it, it seem the graphics card can't resume and the monitor says 'no signal', but the system still responses, I can use keyboard.

Is there any configuration I can't do to make it resume normally? I've searched a lot in Google but can't find out any one else run into the same problem.

Information about the card:

Quote:

View 5 Replies View Related

Ubuntu Installation :: NVIDIA Graphics Driver - Graphics Mode Option Via The Start (GRUB)?

Jan 26, 2010

I have just installed Ubuntu (9.10) and noted that in order to successfully run the trial off the CD I had to test in "safe graphics" mode. I have an NVIDIA GEforce 6600 GT card - which was discovered by Ubuntu in the first few minutes of the trial and so I activated the recommended driver and continued to test. After a successful trial I installed Ubuntu (dual partition Ubuntu / Windows XP), however, it seems the install didn't activate the required driver (as part of the process) and so I'm unable to get into my newly-installed Ubuntu at all. All I get is a flashing tty screen asking for my username and password - however it's erratic and won't recognise what I type. So - I'm stuck in a catch-22 as there doesn't seems to be a safe graphics mode option via the start (GRUB?) menu list.

View 4 Replies View Related

Ubuntu :: Just Won't Login Anymore - "run In Low Graphics Mode For One Session" Doesn't Work

Jul 21, 2010

I've been using ubuntu for months now and it was really frustrating dealing with hardware issues. Just when I thought everything's going ok, today, when I boot up, I am greeted by the following error: "Ubuntu is running in low-graphics mode your screen, graphics card, and input device settings could not be detected correctly, you will need to configure these yourself."

Selecting "run in low graphics mode for one session" doesn't work. It looks like it's loading something but nothing. I tried various options like "reconfigure X" and none of them works. I can login the console find though. I have a backup from a month ago but I've changed a lot since then.

Ubuntu 10.04
HP G61 laptop
ATI Radeon HD 4200

View 1 Replies View Related

General :: Booting Live Cd Of Fedora 15 / Change Argument During Booting Mode?

Jun 1, 2011

I am in a situation to boot fedora 15 live cd in to command line mode, not graphical mode, for some testing purpose. how to change argument during booting mode

View 4 Replies View Related

Ubuntu :: Gunna Run In Low Graphics Mode

Mar 16, 2010

i did an update after a LONG time on my machine (there were like 77 updates) and when i restarted the computer, as reccomended, it booted up saying that ubuntu is gunna run in low graphics mode... apparently i am not able to use a window manager either, as became evident when i clicked on the "show desktop" button...

also there are no tabs for any of the open windows on my "start bar" (the lower bar across the screen... also i cant switch to different desktops anymore and i cant maximize/minize or drag windows like my web browser around (probably cause there isnt a window manager running)....

View 2 Replies View Related

Ubuntu :: 10.04 Randomly Go Into Low Graphics Mode

May 14, 2010

I have (not so recently) installed 10.04. It seems to randomly go into low graphics mode completely randomly i.e. using firefox, gimp, terminal.... not just with high graphics programs. A dialog will pop up and say that my devices are not detected/ configured properly. I then have to force shutdown..

View 9 Replies View Related

Ubuntu :: Cannot Boot 9.10 With Graphics Mode

Apr 9, 2011

In these days I install ubuntu 9.10 64bit on several notebook (Intel + AMD Switchable Graphics, NVIDIA Optimus Hybrid graphics), but the same problem is it can't boot ubuntu with graphic mode. I only can install it with text mode, and after installation, it still boot with text mode. I tried to execute startx, but failed to switch to graphics mode. I didn't see this issue with some notebooks with ATI/NVIDIA graphics, so I think this issue may relate with VBIOS VBE mode settings.

When I try to execute "startx" under the text mode, some error information appears as below.
(EE) open /dev/fb0: No such file or directory
(EE) No devices detected.
Fatal server error:
no screens found

View 3 Replies View Related

Ubuntu :: Running In Low Graphics Mode

May 7, 2011

I was attempting to install conky, but I hit some errors and now my ubuntu is running in low graphics mode.

View 1 Replies View Related

Ubuntu :: Running In Low Graphics Mode / Fix This?

Feb 21, 2011

I have Ubuntu 10.10 and when I boot my PC I can see the following message: Ubuntu is running in low graphics mode and Ubuntu stops booting. I can-t boot in it I can only use command line.
I think I accidentally uninstalled some packages clicking at completelly removal at some ipod utillities in synaptic. How can I fix this?

View 4 Replies View Related

Ubuntu :: 9.10 Running In Low Graphics Mode - EE Messages

Mar 2, 2010

I'm running Ubuntu 9.10. I tried a solution for a wifi problem (wasn't always connecting) and now when I reboot I get "Ubuntu is running in low graphics mode" along with a bunch of EE messages. When I click OK it gives me "Run Ubuntu in low-graphics mode for just one session." Which gets me back to the desktop.

View 1 Replies View Related

Ubuntu Installation :: Running In Low Graphics Mode?

Mar 24, 2010

I am getting the following upon booting up after upgrading from 9.10 to 10.04 Beta:

Ubuntu is running in low-graphics mode. The following encountered. You may need to update your configuration to solve this

(EE) intel(0):[drm] failed to set drm interface version
(EE) intel(0):Failed to become DRM master
(EE) intel(0):failed to get resources:Bad file descriptor
(EE) intel(0:Kernel modesetting setup failed
(EE) Screen(s) found, but none have a usable configuration.

I then press the OK button (no other option given). Then I'm presented a menu with the following options:

(x) Run Ubuntu in low-graphics mode for just one session
( ) Reconfigure graphics
( ) Troubleshoot the error
( ) Exit to console login
( ) Restart X

Cancel and OK buttons. I choose OK and the system seems to boot ok.

I'm not sure what is wrong or how to go about solving this one.

View 3 Replies View Related

Ubuntu Multimedia :: Lucid Low Graphics Mode?

May 15, 2010

This started yesterday.I have been running Lucid since the Beta release with no problems. Yesterday, I found about 20 or so updates ready for 10.04. I looked them over, mostly lib files, so I decided to go ahead and let them update. That evening I rebooted my machine before I left for the night, and it came up with the error "Ubuntu is running in Low Graphics Mode". In a word X is totally hosed. The display is cut just left of center, with part of the windows on the right carrying off the screen to come back onto the screen to the left.

I thought maybe Xconf might have been messed up, but not sure how. The updates I applied did not do anything to Xorg; and my understanding was that I didn't need that file because I am running with an Nvidia card. I tried to "reconfigure" the X settings from the error message, that did not work. I logged into a text only terminal, and copied a good backup of Xorg.conf back into place and rebooted. Same thing, still running in Low Graphics mode.

View 9 Replies View Related

Ubuntu :: System Running In Low Graphics Mode / Fix This?

Jun 20, 2010

(Consider yourselves forewarned: I'm completely new and will be incredibly stupid. Give me slack. )

So I'm trying to run my S-Video cord from my HP Desktop to my television screen. Everything was set up, then I looked up how to get it to start playing on forums here. I went to my NVIDIA, and when I went to change what apparently had to be changed, it was already set up in the format I was supposed to set it up as. I hit "save", and then restarted my computer, as the step-by-step instructions said. Upon restarting, I got an interesting message saying that Ubuntu had to be run in low graphics mode. I don't know the logistics of my computer, or really anything (it was given to me, and I don't know how to check ) I've been reading some things here, and a few things sounded like what was wrong with me, but when I followed the directions, it got me no where. I'm coming to you to prevent me from chucking this thing out my window .

So, what I'm asking from you:

1)How do I get out of Low Graphic Mode
2)How do I set up my NVIDIA to play to my TV?

View 1 Replies View Related

Ubuntu :: Low Graphics Mode - Intel 845G

Jul 30, 2010

Have a reasonably old HP D510 running onboard Intel 845G graphics, which has worked fine to date using Suse 10/11.x x86 and also have tried various Ubuntu breeds on it before, as well. Have just installed Kubuntu 10.04, and am having issues that irregularly, and apparently randomly, screen goes black and I get a message saying "Ubuntu is running in low-graphics mode".

I OK this and get a messages asking me what I would like to do:
1 Run in low graphic for this session
2 Reconfigure graphic
3 Troubleshoot
4 Exit to console
5 Restart x

Basically, none of these work. If I click 2, there are a number of choices which don't work, can only cancel. Basically the only fix is a reboot, and it will again work for a 'random period of time'. Have never had this issue previously, so it is obviously something that has been introduced with 10.04? Briefly installed Ubuntu 10.04 prior to Kubuntu, and think I had the same prob.

View 3 Replies View Related

Ubuntu Installation :: How To Boot Into Low Graphics Mode

Sep 11, 2010

Installed ubuntu successfully on the hard disk through live CD. My machine is a ASUS K40IN, with Graphics card GEForce G102M. Can't get ubuntu to run normally so I have to access through terminal in recovery mode. I need to install the drivers for the graphics card so I can run ubuntu in some form of gdm, otherwise I'm pretty much blind since I'm not too good with code.

/etc/x11/xorg.conf does not exist, so I can't use the exploit to get me to low graphics mode.

If there's a command I can enter into grub to run me in low graphics mode, anyone? I'm keeping [URL] and [URL] threads in view, since it's very possible I'm running into the same problems. I have the nvidia driver loaded on my ntfs usb stick ready to transfer and install but I can't seem to mount it proper. FailsafeX graphics mode does not work. I get a blank black screen.

View 1 Replies View Related

Ubuntu :: 10.04 - Internet In FailsafeX Graphics Mode

Oct 8, 2010

I'm facing a peculiar problem with my Ubuntu 10.04. In the normal graphics mode, while connecting to the internet, it is showing "Resolving host" in the browser and never gets connected. However, when I boot the m/c in to FailsafeX Graphics Mode (under repair option), I can surf the internet. I think there might be some problems with the graphics.

View 4 Replies View Related

Ubuntu :: Low Graphics Mode After Theme Install?

Oct 25, 2010

Running Ubuntu 10.10 on a Dell PC. I recently installed a theme called Faezna and now Ubuntu always runs in low graphics mode

I have
-Uninstalled and deleted theme files
-Changed theme back to default theme
-Rebooted several times
-Restored graphics settings in low graphics mode (pre-boot menu thing)

The thing that makes it worse is that the theme never even worked in the first place and T never got to see it!

View 4 Replies View Related

Ubuntu :: 10.04 Running In Low Graphics Mode Message

Oct 31, 2010

First off, I am still using 10.04. This hasn't happened to me until now. I was in Vista (I have vista on another partition) doing some things in Photoshop, and I saved it, and done. I restarted to go back into ubuntu and when it was booting it gave me a message saying:
Ubuntu is running in low-graphics mode. Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself.

If I click OK (there are no other options) it takes me to a screen asking, "What would you like to do?" The options are:
Run Ubuntu in low-graphics mode for just one session
Reconfigure graphics
Troubleshoot the error
Exit to console login
Restart X

View 2 Replies View Related

Ubuntu :: 10.04.1 Dont Boot In Graphics Mode

Feb 4, 2011

I had been using Ubuntu 10.04.1 in a Macbook pro (triple boot: Mac, Win7 and Ubuntu). Now I am not able to boot in to Ubuntu in graphics mode. It just freezes after the Ubuntu logo appears. It happened once before and I re-installed the OS. Now I have the same issue. I can boot in recovery mode and get into my account.

When I tried startx command I get the error below:

(there is more stuff splashed on the screen, but the above two are the only errors I see)

I thought of reinstalling the OS. But this may happen again and re-installing the OS every month wipes out all my configurations and files in my account.

View 2 Replies View Related

Ubuntu :: No Options Working In Low Graphics Mode

Feb 15, 2011

I recently uninstalled some unnecessary libs thinking that I could work around without them. It turned out I couldn't. So I installed every single one, and it seemed like everything was working fine. But then I tried to boot, and was thrown into a low-graphics. Well I tried to boot in a low-graphics environment temporarily but it turned out X just restarted. Then I tried to reconfigure the settings, but choosing any option it threw me back into the last menu without any action being taken.

So I googled up some lines it was vomiting at me and it indeed might be my xorg not configured properly. but every time I try to reconfigure it and I look into the .conf file it turns out it is completely blank. maybe I should also note I am sporting a 64 bit bubuntu, not an NVidia though, Intel Series 4 express chipset family thing. I think it is a GMA4500MHD but not sure, what shall I do so that I don't have to reinstall my beautiful pimped out system?

View 9 Replies View Related

Ubuntu Installation :: 10.10 Runs In Low Graphics Mode

Feb 16, 2011

I just installed Ubuntu on a laptop that is running windows 7. I accidentally tried installing a piece of software from the software centre before setting up my network. When I boot Ubuntu it now runs in low graphics mode only.

View 9 Replies View Related

Ubuntu :: Low Graphics Mode After Power Outage?

Mar 16, 2011

So the power went out at my house recently, and my home theater PC seems to have taken a blow. We had it on a surge protector, which didn't blow so that's fine, but it keeps telling me its in low graphics mode, and I can't seem to fix it for the life of me. I could reinstall ubuntu, but I have a bunch of movies and music on that drive that I want to keep.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved