Ubuntu Multimedia :: Nvidia Keeps Booting Into Low Graphics Mode
Oct 4, 2010
I cannot get my driver to work in 10.04 LTS. I've googled all around and still can't fix this. Randomly when I boot up it says ubuntu is running in low graphics mode. It was working yesterday. I had this problem before and it just randomly fixed its self. I have an Nvidia 320m graphics card with drivers from the hardware drivers program.
I have just installed Ubuntu (9.10) and noted that in order to successfully run the trial off the CD I had to test in "safe graphics" mode. I have an NVIDIA GEforce 6600 GT card - which was discovered by Ubuntu in the first few minutes of the trial and so I activated the recommended driver and continued to test. After a successful trial I installed Ubuntu (dual partition Ubuntu / Windows XP), however, it seems the install didn't activate the required driver (as part of the process) and so I'm unable to get into my newly-installed Ubuntu at all. All I get is a flashing tty screen asking for my username and password - however it's erratic and won't recognise what I type. So - I'm stuck in a catch-22 as there doesn't seems to be a safe graphics mode option via the start (GRUB?) menu list.
A few days ago, I upgraded my system from the EOL 9.04 to 10.04LTS. This did go relatively well, though the upgrade process reported some "could not update" errors for the NVIDIA drivers and at the first boot it reported it had to start in low graphics mode. I noticed that I had manually installed drivers from NVIDIA's website before the upgrade, while afterwards the hardware drivers from the package manager had been enabled. I then disabled Ubuntu's drivers, and attempted to manually reinstall NVIDIA's own drivers.
This resulted in some errors related to the install script not being able to find some vdpau related stuff. Something interesting then occured. As root everything worked flawless, but as normal user I still ended up with errors resulting Ubuntu to continue in low graphics mode. So I enabled the package managers driver again. This seemed to solve all issues for the next 5 boots. Until this morning, I again get a black screen with only a blinking "_" on the screen for quite some time, after which (nice feature) Ubuntu proposes to continue in low graphics mode.
Here is a relevant part from my syslog: Aug 10 08:17:53 linux kernel: [24.075265] [TTM] Zone kernel: Available graphics memory: 1028724 kiB. Aug 10 08:17:53 linux kernel: [24.075275] [drm] nouveau 0000:04:00.0: 256 MiB VRAM Aug 10 08:17:53 linux kernel: [24.097167] [drm] nouveau 0000:04:00.0: 512 MiB GART (aperture) Aug 10 08:17:53 linux kernel: [24.098283] [drm] nouveau 0000:04:00.0: Allocating FIFO number 1 Aug 10 08:17:53 linux kernel: [24.102934] [drm] nouveau 0000:04:00.0: nouveau_channel_alloc: initialised FIFO 1 Aug 10 08:17:53 linux kernel: [24.103515] [drm] nouveau 0000:04:00.0: Detected a DAC output Aug 10 08:17:53 linux kernel: [24.103518] [drm] nouveau 0000:04:00.0: Detected a TMDS output Aug 10 08:17:53 linux kernel: [24.103521] [drm] nouveau 0000:04:00.0: DCB encoder 1 unknown Aug 10 08:17:53 linux kernel: [24.103522] [drm] nouveau 0000:04:00.0: Detected a DAC output Aug 10 08:17:53 linux kernel: [24.103526] [drm] nouveau 0000:04:00.0: Detected a VGA connector Aug 10 08:17:53 linux kernel: [24.103577] [drm] nouveau 0000:04:00.0: Detected a DVI-I connector Aug 10 08:17:53 linux kernel: [24.858579] nvidia: module license 'NVIDIA' taints kernel. Aug 10 08:17:53 linux kernel: [24.858583] Disabling lock debugging due to kernel taint Aug 10 08:17:54 linux kernel: [25.401599] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5 Aug 10 08:17:54 linux kernel: [25.632700] NVRM: The NVIDIA probe routine was not called for 1 device(s). Aug 10 08:17:54 linux kernel: [25.632704] NVRM: This can occur when a driver such as nouveau, rivafb, Aug 10 08:17:54 linux kernel: [25.632705] NVRM: nvidiafb, or rivatv was loaded and obtained ownership of Aug 10 08:17:54 linux kernel: [25.632706] NVRM: the NVIDIA device(s). Aug 10 08:17:54 linux kernel: [25.632708] NVRM: Try unloading the conflicting kernel module (and/or Aug 10 08:17:54 linux kernel: [25.632709] NVRM: reconfigure your kernel without the conflicting Aug 10 08:17:54 linux kernel: [25.632710] NVRM: driver(s)), then try loading the NVIDIA kernel module Aug 10 08:17:54 linux kernel: [25.632711] NVRM: again. Aug 10 08:17:54 linux kernel: [25.632713] NVRM: No NVIDIA graphics adapter probed!
What happened was, i used sticonfig to attempt to OC my graphics card, it all seemed to work well, then i put some stress on the card and got a 'black-ish' screen. No matter i though i will boot into text mode (How do you do it normally? The only reason i could was because i crashed my system and could choose recovery mode to then choose text based) and change it back to default and it will all be fine, woo... But apparently you need to be in X server for that command to take effect. ****...........
How do i get into text mode from booting up? How can i fix this?!
I have tried looking in BIOS but there is nothing there. Have i just fried my card? (It was close to max settings - although only on full load for like 1 second) Could booting up normally, and just 'going in blind' work, like opening up terminal with a hotkey and just entering the command from there....
Ubuntu 10.10 PowerColor Radeon HD 5870 Ati catalyst drivers installled
I can run Ubuntu 10.04 just fine as long as I have my hardware drivers disabled, but when I enable my hardware drivers I get an error before the GDM login screen that says something to the effect of it being unable to load the NVIDIA KernelI'm then given the choice of booting into low-graphics mode, configuring xorg for this hardware, troubleshooting, dropping to console, or restarting X.Booting to low-graphics mode does nothing useful, just boots to low gfx mode.Configuring xorg for this hardware does nothing at all - same errors after trying every single option in the configuring xorg sectionTroubleshooting is equally useless to me - I can't copy and paste the very-long error reports, I'm not an xorg pro so editing the xorg conf doesn't help me, and when I tried following the option to export all my config and error logs, it said that it has exported it to $xorg_backup_file - but that's just a variable not a file.. after a reboot I can't find this anywhere.
I've googled this and the only useful info I've found is to run nvidia-xconfig as root, which I've done and it has zero effect.The only temporary solution is to disable the nvidia driver, which lets me boot normally using metacity at full resolution, but has no accelerated 3d or composite overlay so I'm unable to run compiz or have any nifty 3d.Details: Vid card: NVIDIA G96 (according to lspci) Driver: NVIDIA accelerated graphics driver (version current) [Recommended] OS: Ubuntu 10.04
sudo apt-get purge nvidia* sudo apt-get install nvidia-current sudo update-alternatives --config gl_conf (not sure what to choose, I just pick an option at random) sudo ldconfig sudo nvidia-xconfig
and then restart gets everything apparently working correctly, with my desktop spread across two monitors.
However, after two or three computer restarts, it 'forgets' and defaults back to low graphics mode and all the common error messages mentioned in multiple threads here, with my second monitor just duplicating the primary monitor.
Under System-Hardware drivers it says Nvidia_current is activated but not in use, regardless of whether it starts normally or in low graphics mode.
What's up? It's a pain to have to go through that sequence over and over again, and then restart my computer every two or three days, and leaving the computer on 24/7 isn't an option. power saving and all that.
So I've searched across these forums and haven't quite found the same problem I'm having. For the record, I'm running Ubuntu 9.10 So I built my new box, and my video card is a Gigabyte Nvidia GeForce 9600GT (GIGABYTE GV-N96TZL-1GI). I go to System > Administration > Hardware Drivers to install the drivers so I can use those fancy 3D effects. It tells me I need to restart, so I do.
When it comes up though, I get an error message about running in low graphics mode, the top 5th of my screen is blacked out, and the screen has been shifted so that the left boundary is in the middle, and the right boundary goes off the screen and back to the left side. It goes back to working fine (but without the fancy 3D effects) when I remove the drivers. Both drivers in the hardware drivers (185 and 173) have this problem. I'd post log files and such, but I'm at work right now.
I have Ubuntu 10.10 and when I boot my PC I can see the following message: Ubuntu is running in low graphics mode and Ubuntu stops booting. I can-t boot in it I can only use command line.I think I accidentally uninstalled some packages clicking at completelly removal at some ipod utillities in synaptic.
This started yesterday.I have been running Lucid since the Beta release with no problems. Yesterday, I found about 20 or so updates ready for 10.04. I looked them over, mostly lib files, so I decided to go ahead and let them update. That evening I rebooted my machine before I left for the night, and it came up with the error "Ubuntu is running in Low Graphics Mode". In a word X is totally hosed. The display is cut just left of center, with part of the windows on the right carrying off the screen to come back onto the screen to the left.
I thought maybe Xconf might have been messed up, but not sure how. The updates I applied did not do anything to Xorg; and my understanding was that I didn't need that file because I am running with an Nvidia card. I tried to "reconfigure" the X settings from the error message, that did not work. I logged into a text only terminal, and copied a good backup of Xorg.conf back into place and rebooted. Same thing, still running in Low Graphics mode.
After installing Ubuntu 10.04 LTS over the weekend I had some problems, which I subsequently solved and thought I'd mention here. - First, the dreaded Low Graphics (EE)NOUVEAU(0):Error allocating scanout buffer:-12 which wouldn't allow me to change my monitor resolution. - Second, TVTime television viewer would not launch at all.
Solution to BOTH of these problems: From Synaptic uninstall xserver-xorg-video-nouveau (experimental) and reinstall xserver-xorg-video-nv. Now everything works!
My problem is that I anyway cannot get to the text console when I have run the desktop environment. When I press Ctrl+Alt+Fx (where x - number of tty console), the video adapter doesn't send signal into monitor. Keyboard also stops reacting, only Magic SysRq Key works. The same result I can see when I turn off the desktop environment (I have uninstalled gdm) or kill X-server with the "kill -9" command. The only way to get to console (except window terminal) is remote connection via SSH.
The problem occurs only when I have run X-server. When I turn on the computer, I can see start messages. Since I've uninstalled gdm, I have also access to the console after I turn on my computer. I can normally switch between tty consoles, until I type "startx" command. Everything started when I've tryed to install non-free ATI video drivers. They practically worked, because I've had some problems with them (I just don't remember what problems), so I've uninstalled them and returned to the open. Then this problem apeeared. I tried to reinstall Xorg, change kernel (installed from repos), switch off the framebuffer, but it gave nothing.
then install ubuntu 9.04,GMA500 Driver,but refer Inf is:
The following error was encountered. You may need to update your configuration to solve this;
(EE) psb(0):THE STOLENbASE IS :OX1FC00000 (EE) psb(0):Screenindex is:0; fbphys is :0x1fc00000;fbsize is:0x003bf000 (EE) Psb(0):Could not find a valid initial configuration for this screen; (EE) screen(s) found, but none have a usable configuration;
, then I try to modify the Stolen Memory to 8MB,but result no change; I doubt BIOS need do some change ,but don't know how to do,
I have recently been experiencing some issues with the powersave on my computer. I had my computer set to put the display to sleep after 10 minutes and put the computer to sleep after 30 minutes. The screen saver also activates at 5 minutes. When I woke up my computer (hit the power button) the computer would sometimes tell me that it was going into low graphics mode. I had to reboot to get my x server back. I disabled the power save to fix the problem, but I would really like to have it back. My latest Xorg.log gives an error, but I'm not sure if the power save caused the problem (more below). I am running a computer with an Intel Integrated chipset.My questions:
What caused the x server to crash?Should I post a bug report on Launchpad? If so, how? (im a bit of a noob as far as bug reporting)How can I fix the problem?Xorg.log:
Code: X.Org X Server 1.7.6 Release Date: 2010-03-17
I made a backup of xorg.conf and added Xinerama and the other configuration items I needed. X failed to load. Then I copied my backup to xorg.conf and...X failed to load. Then I tried booting up in safe graphics made, and X failed to load. I tried dpkg-reconfigure xserver-xorg, but it did nothing. Literally nothing -- no error, no output, no nothing. Then I saw someone who had suggested to apt-get remove --purge xserver-xorg, then reinstall it, and X failed to load.
I am at a complete loss. I have now read that the dpkg-reconfigure xserver-xorg is no longer used, that the os is supposed to autodetect everything now, but in that case I don't see how I will ever get dual monitors. In any case, I can live without dual monitors, but I need at least ONE monitor, and I have no idea how to get the configuration working.
After updating Ubuntu 10.04 I'm getting this error message. "Ubuntu is running in low graphics mode. Failed to load the NVIDIA kernel module." I have a NVIDIA Geforce 220 video card and previously installed the NVIDIA drivers. All was working well until this last update. There are countless number of forum messages on how to fix this but my problem is compounded because when I get this message the machine appears to lock up.
It doesn't respond to any keyboard commands such as Ctrl-Alt-F1. I am not able to get to a command prompt at all. This was a fresh install of 10.04 so I believe it uses GRUB2 which automatically boots into the operating system with no menu. Is there a way to stop GRUB2 from automatically running the OS and giving me a menu? I really don't want to reinstall.
I have a dual boot xp -ubuntu - AGP ati 2600 series radeon. Intel 8300 dell. The message comes up after login "ubuntu is running in low-graphics mode". I hit ok and I get 5 choices and none of them work.
1) run ubuntu in low-graphics mode. 2) reconfigure graphics. 3) troubleshoot the error. 4) exit to console login. 5) restart X.
I downloaded a linux kernel from linux.org to check what is the kernel is about, i clicked on make_file or make sth .. and in the same session i downloaded a program called login window.
Now the problem is that the system boots ok, it gives me a msg saying that system is running in low graphics mode, when i press ok i get a few options like troubleshootin or restart x or use back up configuration .. and nothing works .. when i press start normally it never stops loading .. i can see the terminal when clicking ctrl + alt + f1,f2 ... but when i press ctrl + alt + f7 or return back to the desktop ubuntu is still loading .. it never stops loading.
And after using ubuntu for a while i really hate windows 7 .. i have it on the system, so is there a way to fix this problem?
I recently did a reinstall on my system and I am now running Squeeze. I am currently trying to get some software running, but I believe I am having issues with the graphics requirements. The software needs an X server with 8 bit / PseudoColor mode. It is recommended to work in "8,24"-overlay mode. This was set up on my old install on this computer, so I know it is not a problem with my graphics card. But in the installation guide it says to enable this function it is necessary to add some information in the file /etc/X11/XF86Config-4. The problem is I don't have this file. I had this file in my old install, but on the fresh install it is not there. I have the /etc/X11/ directory, and it contains: directories: app-defaults, applnk, cursors, fonts, twm, xinit, xkb, Xreset.d, Xresources, Xsession.d
I think I've looked through everything in the /etc/X11/ directory but I don't see anything that looks like the XF86Config-4 file. Is there possibly a package that I am missing or something I need to run to create this file? I know on my old install this file was created or modified by running 'xf86config' in the command line. I've tried that, but it tells me 'command not found'.
After a PSU and motherboard failure, I'm about to spec out a new PC. The last time I looked, Nvidia was the preferred graphics chipset as they tended to support Linux better than ATI. Is this still the case?[url].... seem to have lots of ATI cards in stock but hardly any Nvidia (despite offering a similar sized range), but I don't want to get an ATI card if it's not preferred for technological reasons (or even FOSS ethical reasons!).
After having some trouble with Intel graphics I decided to pick up a PCI Nvidia graphics card. Now I am wondering what driver to use. Is the open source drive good enough to use or should I install the Nvidia driver? I know that things are generally easier with the default driver, especially for support on older cards, but I would like to get the best performance I can. This is for my Dad's computer, so he won't be playing any games, but if it will help with 2D and video that would be great.
The card is an Geforce FX5200 fanless card, I've heard they are well supported in Linux.The computer is a P4 Dell 3000 with Ubuntu desktop 10.04 32bit.
I am having problems installing the graphics driver (from the Nvidia website) for my Nvidia Vanta card on Ubuntu 10.04. I disabled X via terminal and then I ran a Virtual Console. With the virtual console I ran the chmod command and the went through the installation. It did bring up a message with something about my distro not having a pre-configured script (or something like that) and asked me if I would like to continue anyway. I choose Yes and the installation failed.
When I leave my computer and later return, depending on how long I've been away, I find the screen-saver running, the screen turned off, or the computer suspended, i get the error as specified below on a black screen:
Quote:
Ubuntu is running in low-graphics mode.
Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself.
The message gives several options. Despite some experimentals, The only solution which I have found is to reboot and everything becomes fine as before.
I have a problem with starting ubuntu 10.10, I changed my graphics card from an ATI card to a Nivida card a week or so ago (Machine has dual boot). I've sort out the windows install, but cant get into ubuntu to update the drivers. It boots as far as console but just leaves me with the text screen. How do I update the drivers from there or get a basic console screen to come up so I can update?
I have a PCI graphics card, Nvidia Geforce FX 5500, but can't get it to work. I have 10.04 installed on a Dell Dimension 3000, P4, 1Gb RAM, integrated graphics. I installed 10.04 without the card in the machine, then shut down and plugged the card in and booted it up again (BIOS setting is 'onboard' for integrated graphics, 8Mb; only other option is 'auto'). Checking the hardware drivers I can see the recommended Nvidia drivers (v173, not yet activated) and lspci gives me the integrated as well as the Nvidia listing:
So far so good, but that's where it ends. Changing the BIOS setting to 'auto' turns the screen off on reboot, both for the monitor connected to the VGA port of the Nvidia card and for the monitor connected to the VGA port of the motherboard. I have to shutdown, take the card out and set the BIOS back to 'onboard' to be able to boot again (and shutdown, plug the card back in and boot up again to get back to where I was).
Activating the recommended hardware driver and rebooting (still with BIOS set to onboard) gives a blank screen (screen is still on and there may have been a flash of the purple screen with the ubuntu logo); nothing else happens no matter how long I wait. Rebooting doesn't help, it turns off the screen; same result for booting in recovery mode. I can get to the GRUB bootloader and when I replace 'quiet splash' with 'nomodeset' I manage to boot again with the monitor connected to the VGA port of the motherboard, but am not anywhere closer to getting my monitor working on the Nvidea card.
Am using ACER Aspire 5745G which has switchable graphics. I recently installed Ubuntu 11.04 - the Natty Narwhal i updated everything after the installation. Now the issue is that when i go to NVIDIA X Server Settings, its giving me an error message:- " You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server. " Error.jpg also tried searching in the forum but it was so confusing, as am Newbie i have no idea where to start.
I already posted this message on another thread but I'd like to start a new thread with it now, and add a few more details. My son and I are having trouble getting the graphics card to work properly in his computer. The resolution is good, but the graphics card is not fully functioning. He works on animation and graphics of several kinds, and the graphics programs cannot run without a fully functioning graphics card.
The computer will not run Blender and other graphics programs. Nor will it even allow for the "normal" "Visual Effects" in the "Appearance Preferences." (It comes up with the error: "Desktop effects could not be enabled," after it tries to find the driver.) The system is:
We know the graphics card works because it works in Windows. (We set up the computer to boot off of either of two hard drives -- either in Windows XP or Ubuntu 9.10, karmic.) Neither my son nor I understand much of the terminology on your forums, although I have been using Ubuntu for some years and have read quite a bit. (I also have the "Beginning Ubuntu Linux" book.) I love Ubuntu, but sometimes I just cannot figure out how to get some things running. We have tried many different ways of installing the drivers and setting up the xorg.conf file. We have followed the instructions on this and other threads. We also installed NVIDIA-Linux-x86-64-190.53-pkg2.run, as well as 173 and 185. The screen will only work at a proper resolution when we set the "Driver" to "nv" in the xorg.conf file. The screen goes completely blank and dead if we set the "Driver" to "nvidia." Then we need to reboot in safe mode and edit the xorg.conf file with VIM.
I have recently upgraded to Ubuntu 10.10. However the bottom of the screen is cut off with only a trace of it visible. I had similar problems with version 10.04 where both and top and bottom of the screen were not displayed.
I have noticed that version 10.10 does not use the proprietry driver the previous versions used.
In desparation I have tried Kubuntu but the results are still much the same.
Does anyone have any idea how I can display a full screen with an Nvidia integrated graphics controller.
So, I am running Ubuntu 10.04 on my laptop. I just did a clean install (instead of upgrade) about a week ago or so. I've been tackling a couple of issues and one of the last ones on my list is with my Nvidia card in the laptop. Nvidia appears to have kindly designed a power saving mode (Powermizer) for our video cards, by clocking down the GPU. However, mine is defaulting to Adaptive mode for Powermizer, and causes much annoyance. While I'm able to switch it to Preferred Performance mode in the Nvidia X server settings, it resets back to Adaptive mode every time I restart the computer. I've tried using the button to save the settings to Xorg.conf, but I think that only saves display configurations such as resolution. I also tried a couple tricks I found online where you can manually edit the xorg.conf file to disable Powermizer completely, but no luck on that either.
