General :: GRUB Xubuntu Boot - Instead Of Reaching The Login Screen?
May 24, 2010
I had been using Xubuntu 9.10 successfully for some time. Recently, however, I tried to boot Xubuntu, and instead of reaching the login screen, a "GRUB" interface appeared. The title was "GNU GRUB VERSION 1.97~beta4"
Below that, there were a few instructions describing the use of the Tab key and a blank command line interface beginning with "sh:grub7". Before this started occurring, my computer would turn on and then display a menu to choose the OS. If I selected Xubuntu, a few lines would flash by, and the login screen would appear. My computer is a Dell XPS M1530 laptop. The operating systems installed are Windows Vista Ultimate and Xubuntu 9.10. The Xubuntu was installed using a Wubi installation.
As far as I remember, I did not make any changes that may have caused this. The only significant event that did occur was a power outage, but my computer was not plugged in nor on at this time.
If everything works normally, how would I boot Wubi Xubuntu from the GRUB interface? Are there any other solutions to this problem?
When I start up my computer Xubuntu is asking me to login (which is strange as I have login disabled). Then, when I do enter my password, it is accepted and after a few screen changes I am returned to the login screen. (I know the password is correct as the login screen informs you immediately if you enter it incorrectly.) Also, I can see that my display settings have been changed--the monitor resolution is wrong--my cursor is way big as are buttons, text etc..
I just installed Xubuntu 11.04 and all of a sudden I got a brown screen when I logged in that made my desktop unvisible (everything else worked fine). After a while I understood it was a problem with nautilus which I installed because I thought I needed to for Dropbox. So this is what I did and it worked:
I set login automatically in the login screen in the systems menu. but on after every boot it shows the login screen many times even after a correct login, and sometimes it doesn't show. I already updated my system so what should I do so that no more login screens after boot?
I've been running xubuntu for a few weeks now, but just today I began having a few problems. When I boot my computer, it simply freezes at the xubuntu logo just before the login screen.
The last thing I remember doing before this is typing export DISPLAY=:0.0 in the tty1 terminal.
i installed Xubuntu desktop and decided i didn't like and uninstalled it.. but it hijacked my boot screen and login/logout screen. i restored the boot screen but i can't find out how to restore the login/logout screen.
I installed Xubuntu 10.04 on my Dell laptop earlier, and all went well until I tried to finally login. A dull black screen is presented (I don't know if that's normal; I expected a pleasant splash screen haha). As a windows user, I can only explain it as looking like a command prompt. The first line asks me for my login (which is my first name). I type it in, press enter, and then it asks me for my password. The problem is, no matter what I press, nothing happens after that.
i installed Xubuntu on my system having a dual boot with Xubuntu and windows xp but when i select to boot on Xubuntu it freezes and gets a message saying that the file hal.dll in system32 cant be found. Before showing me this message i tryed to uninstall the Xubuntu inside from windows xp because several problems showed up after installing Xubuntu. I can boot on windows xp but i cant boot to xubuntu and cant uninstall xubuntu.
I'd like to change the boot splash screen from the current 'Xubuntu' text in white on a black background.Making changes in Settings->Xfce 4 Setting Manager->Session and Startup has had no effect, and Startup Manager does not display an option to change the splash. I feel I'm missing something obvious here, but where should I be looking?
I have freshly installed Xubuntu on my HP compaq nx9010 laptop and grub doesn't boot system. Only minimal BASH-like line scripting is supported. How can I fix it?
10.10 32 bit on a pc with a GForce 9600 GT VGA and P5KPL-SE mainboard.Sometimes, while booting, after the letters on the screen message " booting from hd1..." get thinner, everything stops and I dont get the purple login screen. After switcihng pc off and rebooting, usually, everything is OK. I used proprietary nvidia driver version current and after switching to version 173 (considering that it might had to do with the driver), maybe it somewhat improved things but the problem persists. IT is not that terrible to reboot except for that I use this pc at work and switching it off sometimes starts the disk check for errors utility which lasts long since disk is 1 TBI tried to read dmesg but am not familiar with the terms I show and gave up
I try to boot the live CD and try xubuntu without installing, and my computer just hangs at a black screen, cuts off, then goes black and repeats. I also tried just installing with nomodeset enabled and it seemed to install fine, but it did the same thing as it does with the live cd, GRUB wouldn't even load... the computers specs [URL]
i am having a boot problem with opensuse.i installed a theme named suse-elegant under personal settings(configure desktop)-system administration-login screen.
i had also added vbox users(i ticked vboxusers) under yast-security and users-user and group management-edit-details to make virtual box work.
i want to check that installed theme so i restarted my laptop.after the restart opensuse taking too long time to boot
note:the login theme also not working.
after the boot i restored defaults in login screen themes.it is also not working.
i don't know which cause this problem(vboxusers or login theme).i am also seeing a root user has been added in my login area.i tried opensuse failsafe also.
the screen is still on but it's like the computer is going idle or something, It makes watching tv shows/movies pretty hard. I have to constantly keep moving the mouse. I have a pentium 4 with about 600 megs of ram. Latest version of Xubuntu.I went into screensaver options and power management options. It's set to two hours before the screensaver comes on, and never to put the screen idle but the screen seems to do it every 20-30 minutes.I'm not entirely sure where to look now, i don't think there could be anything wrong with the hardware, otherwise moving the mouse wouldn't make the screen come back on.
since i have installed the nvidia drivers i have lost the graphical boot and just had a bar at the bottom of the screen instead. i tried to get the graphical screen back by adding vga=795 to my /boot/grub/grub.conf but when i rebooted not only did i not get the graphical boot or the toolbar at bottom.
i got list of all the drivers and services it is starting with ok next to it. i have also since doing this lost the bit when restarting or shutting down getting the words restarting or shutting down and just get blank screen with flashing cursor. i removed the vga=795 and i still get the list of drivers/services loading.
how do i get the quiet option back. i have checked /boot/grub/grub.conf and it has the quiet in it.i have also tried running update-grub but get message command not found. i have attached the grub.conf file
I've been running openSuse 11.2 for a while on my notebook.Today I turned it off at work and came home. When I tried to turn it on, it boots, shows a black screen written 'GRUB' and then NOTHING. It doesn't complete the boot process.
I am using Ubuntu 10.04.1 and I run it 24 hours a day. Recently one morning I went to my laptop and opened the screen but the login screen wouldn't appear. Anytime the cursor appeared, HDD activity would go to 100%. I'm assuming this because the HDD light on my laptop was permanently on. So I made the dumb decision of just holding the power button down and turning it off. When I turned it back on, I noticed it came to a command prompt type screen listing "initramfs" at the bottom apparently wanting me to input a command. I did a lot of research and couldn't find much of anything that would help me. I read about GRUB, superblocks, fsck, e2fsck, etc.. . I tried all of those and nothing has worked so far. Any ideas? I did notice one thing. When I went into the actual install with the livecd, it told me the drive was /dev/sda5, but in Disk Utility on the livecd, it told me it was /dev/sda1
my Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
i used to have 9.10 but now upgraded to the latest version. Back then I changed the background to full black for both the preboot screen and login screen.Now after upgrading it changed it to the purple color screen. I am wondering how I can change back the background color?
I have recently installed Ubuntu 10.10 and it's working fine. The only problem I have is that grub is not showing and I automatically come across the login screen.
I installed Fedora on a separate partition and during the install prompts forgot to uncheck the Grub installation. So, Fedora installed with Grub 1 (imagine that) although I was able to find instructions to upgrade it to Grub 2 (plus it recognized all the OS on the computer). So far so good, I don't have a preference whether Fedora's or Ubuntu's Grub is installed, however the Ubuntu Startup Splash screen is messed up, ie. a simple purple background with "Ubuntu" in system fonts. Is there a way to fix this back to the graceful default splash screen? Can I change back the Grub to be Ubuntu's?
Ever since the intro of Grub2, on the main Log-in screen, there is a "User" listed at the bottom of whoever is listed on the Users Log-in. Just what or who is this used for?. If it is 'clicked' on, then it asks for a password, as if 'it' is some kind of "user". But, as I don't know just what 'it' is for, therefore I also don't know 'its' password either.
I am trying to streamline my boot screen/GRUB Menu. I know what I want it to look like (grub_wanted.jpg), and I think I know how to get it by uninstalling a couple of things, (synaptic.jpg). Now I have too many items on the screen, and it looks cluttered to me (grub.jpg).
I followed a tutorial to install XP across my entire HDD. I installed Ubuntu 10.10 "Alongside another OS". Ubuntu loads fine, but when trying to load XP, the boot screen shows up, but then the computer restarts and returns to the GRUB menu.
I saw some threads on this site and tried to type: sudo gedit /boot/grub/menu.lst
In the terminal. It returned a blank text document so I'm not sure if that information was outdated. I then typed: sudo fdisk -l
And got this:
Not sure what any of this means, but I sure hope someone else does. I would say forget XP, but it's hard to let go of some of the games and software I use. I appreciate any responses, thank you.
I tried to format the table as it appeared, but the forum corrected the extra spaces.
I've installed Ubuntu desktop edition 10.04 so far, using alcohol tool as I wanted to install "inside Windows".I successfully installed it everything seems to be fine to me. But, the problem is when I select Ubuntu from boot menu it stops at a console with some grub loader message and doesn't shows login screen.
Please, not that I had installed it a couple of time before and it worked perfectly for some reason and Windows problem I had to uninstall it.
I can also post pictures of that screen if you require, I've to capture it through my mobile phone, which is with suck graphics.
I'm trying to test out using xubuntu 10.04 on my one computer and keep getting a black/blank screen after selecting the 'try' menu option.Is there a way to fix this?I have tried some of settings via F6 with no luck.
FYI -The CD works fine as I have tested it on other machines.The version I am trying is xubuntu x86 (although I have tried ubuntu 10.04 x86 with similar results).I can Alt+Ctrl+F1 fine and get to the cmd prompt
How do I install SDL (and other libraries) onto my dual-boot (XP/Xubuntu) computer? With only what came on the Xubuntu disk, I am able to play Oolite at what seems to be 1000 FPS, and Torcs at about 70 FPS.
