i found ubuntu 904 can work on my old computer machine with a built in ati display card.updating as it return a message saying that the repository may not be available..
View 4 RepliesAs a newbie I am trying to use kbuntu 9.04 on my AMD64 computer with built in Nvidia 7050 display. I can only get 640x480 or 800x600 screen resolution that does not suit my 22" Supermatch monitor. I have tried numerous xrandr instructions but cannot make any progress please help in simple language.
View 1 Replies View RelatedI have installed Ubuntu on my MSI Mega PC but have no sound, also the display on the front of the computer doens't work. Unsure if there are drivers for this but here goes:
[Code]...
I just bought a new graphics card and installed it. it works perfectly although my sound worked perfectly this morning and I think the graphics card is overriding my built in sound card. I need help fixing the sound. The graphics card I bought is an ATI Radeon Cedar HD 5450 The sound I want to use is HDA VIA VT82xx
when I run alsamixer I get Card:
HD-Audio Generic
Chip: ATI R6xx HDMI
[Code]....
So Im having problems getting sound to work on my new machine. I dont know if its a hardware problem or if its something else. Im kinda a linux amateur but have been using it for a couple years off and on. Im running
Ubuntu 10.10
Biostar N68s+ mother board
AMD athlon 64 x2 dual core processor
my video card is a MSI N8400GS.
Im using a DVI to HDMI cord and running it into my flat screen TV for my monitor. I normally just used a analog splitter from the back of the pc to the tv for my sound to work. Never had a problem before I had this machine put together.
I am trying to build a low cost computer, and over the last few days, I was interested in Linux as my OS to use. All I really need for the computer was the internet, word processors, and 3 games: "Wizard101", "Fusion Fall", and "Free Realms". Would Linux run on a built computer with an AMD processor and an on-board GPU? And would Linux run all of my needs/wants for this computer?
View 9 Replies View Relatedso here's my problem. I am trying to install windows xp on my computer in virtual machine so i can watch netflix on my computer. The disk will not start up, if I restart and try to boot from load i just sits there and says boot from cd. The disk drive plays music cd's fine, so i dont really know what the issue is.
I dont know that much aboutut ubuntu. a tech friend put it on hard drive he gave me after mine crashed. also i should ad that i took the disk to someone else's house that haswidnows installed and the disk worked just fine, so its not a disk problem
I am using Intel builtin VGA card. I got a problem with resolution which is max here 800*600. I want to set it to 1024*768. I already did that using xandr but the problem is every time I restart I get to my default settings feeling like ubuntu discharge all my changes all fields even if i followed the steps of saving.
View 5 Replies View RelatedMy friend has following configuration
Pentium 4 2.4 Ghz
256 MB DDR RAM
Western Digital WD1600AVJS-63WNA0 hard disk
PM8M-VHMS7104 VER 3.0 motherboard
The motherboard has Realtek sound card built in but there is no sound output. He is using Ubuntu 9.10.
I'm using 10.04 and it's been excellent all the way through up until this problem happened. My laptop's built-in SD card reader has stopped working out of nowhere.
Here are the basic facts:Laptop is a Compaq Presario CQ50-115NR I tried older Linux Kernels, it's not the newest kernel causing the problem. The SD card reader is not shown in disk utility anymore. It used to be shown, even when no SD card was inserted. Now? Nothing.lspci output:
Code:
00:00.0 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation Device 075e (rev a2)
00:01.1 SMBus: nVidia Corporation MCP78S [GeForce 8200] SMBus (rev a1)
00:01.3 Co-processor: nVidia Corporation MCP78S [GeForce 8200] Co-Processor (rev a2)
00:01.4 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a1)
[Code]...
I am trying to disable the built-in card reader in my MBP (5,3) running Debian testing. I've noticed that powertop lists the card reader as a major contributor of wake up events and would like to disable it as I rarely need to read SD cards.
I found this with "dmesg":
scsi 6:0:0:0: Direct-Access APPLE SD Card Reader 1.00 PQ: 0 ANSI: 0
and this from "sg_scan -i":
/dev/sg2: scsi6 channel=0 id=0 lun=0 [em]
APPLE SD Card Reader 1.00 [rmb=1 cmdq=0 pqual=0 pdev=0x0]
I don't know where to find the device in /proc and there are no modules loaded for this device (I'm guessing it has support compiled into the kernel).
So, ideally, I would like to be able to enable/disable this device without a kernel recompile. Is this possible?
I just lost my weekend trying to install Xubuntu 10.04 on my pc I made the ps a while back - its built on a ASUS P4S800D-E motherboard and it has an ATI Radeon 9200 LE graphics card. It has a PS/2 keyboard and mouse, 1Gb of memory and a 160Gb PATA/IDE hard drive (I unplugged the SATA drives) Every time I installed or made a tweak to the config it failed in the same way. It showed its failure by continually repeating the first character typed. Regardless of whether this was the password screen for synaptic or just the first character typed into a terminal. Until the first character was typed the mouse seemed to work ok but then it would stall too
I've tried most things, running Xorg with/without an xorg.conf file, loading the ppa kernel and tweaking loads of bios and grub boot parameters all to no avail. So I think I want a more linux friendly graphics card and I fear I may need a new motherboard. Can someone recommend a replacement graphics card for this motherboard? Can anyone reassure me that my motherboard is ok with linux?
I have an Acer Aspire One running Fedora 10.The Aspire One has a built in multi-format memory card reader compatible with SDHC, XD, Memory Stick Pro and MMC cards, however the card reader is only detected during bootup if a card is inserted otherwise the device isn't detected, the relevant drivers aren't loaded and the card reader doesn't work.
In other words if Fedora is booted without a card in the reader and I then want to use the card reader I have to insert a card and reboot in order to use it, after which cards can be inserted & removed and are detected and automounted with no problems.When the card reader is working lsmod shows the following modules are loaded.
[Code]...
If the laptop is booted without a card in the reader none this shows up. I've also tried manually loading the mmc_core, mmc_block, sdhci, memstick & jmb38x_ms modules to see if this kicks the reader into life but it doesn't. Is there a way of forcing the detection of this device during bootup?
I'm trying to add a webcam and it get's registered nicely. The problem is that after a reboot it registers as card 0, my internal card gets registered as card 1, and I lose all sound.
arecord -l without webcam:
Code:
card 0: default [PnP Audio Device ], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
[code]....
C-Media is the built-in soundcard and Philips is the webcam.why the built-in is registered as an usb-device but it is and external sources confirm that this is correct. According to the alsa project wiki the correct way to give two devices using the same module (such as two usb-devices) a specific index is to add something along the following in the main alsa configuration file.
Code:
options snd-usb-audio index=1,2 vid=0x0ccd,0x0d8c pid=0x0028,0x000c
As I use Debian Squeeze 64-bit with the odd package from sid and multimedia repository enabled I found that the correct file to add this in is /etc/modprobe.conf. I therefore added this:
Code:
options snd-usb-audio index=0,1 vid=0d8c,0471 pid=0201,0333
This corresponds to my hardwares' VID and PID. When I reboot I and do arecord -l I get:
Code:
arecord: device_list:223: no soundcards found...
As an alternative I tried to add this snippet to /etc/modprobe.d/sound instead but at boot I get the message that "vid 0d8c" is an invalid parameter. Well, it's not. It adds upp with the output from lsusb and the external source linked to above. Do I need to add that arecord -l tells me I have no soundcard?
I am running fedora 14,
have 456.2 MB RAM
59.9 GB disk space
Kernel 2.6.35.13-91.fc14.i686
Intel Pentium 4 CPU 2.00Ghz
SIS motherboard
Unknown brand sound card
Have tried tried the following music apps
-Amarok
-Audacity
-Banshee
-Rhythymbox
-Kaffiene
-Movie Player
Have played
-mp3
-m4a
-wav
Used several diff speakers and heaphones
What is the problem?
I have a Dell system with a Dell SP2309 monitor. I have been told it's supposed to have a built in webcam and microphone. How can I chek to see if this is true and if so...how do I get them to work?
View 3 Replies View RelatedI've tried my built in webcam with TinyChat and it wont work. It works on some other programs, but for some reason TinyChat can't find my webcam.
I have an HP Pavilion dv2000 and a built in webcam with it. I'm currently running Ubuntu v.10.4 LTS
I have ubuntu netbook remix on my netbook and how Do I wondering how to get the built mic working. I am wondering how to get the built mic workin. My camera works perfectly but not the mic. When I make vids on ....., there is no sound!
View 1 Replies View RelatedI am trying to switch from the video device built into the mother board, to a card i just put into my machine. I'm using gnome and don't know where to start. I shouldn't need new drivers (based on a possible misunderstanding) because I am going from a nvidia 6100 to a 8600. I have looked in various places like the control center but haven't had any luck. I just started using linux and have very little experience in the terminal. Issues with the current card are stopping me in my learning process.
View 9 Replies View RelatedEver since newer karmic kernels 2.6.31-21 and 2.6.31-22 the Asrock ion built in IR wont work with the drivers Asrock provides even though they have since then provided drivers for 10.04, which still doesnt fix the issues with the remote (just doesnt work)
THE PROBLEM
The solution is of course to downgrade kernel to 2.6.31-20 #58 which remote works fine and newer script version introduces a fix to this. However looking at the available packages seems that most of the kernel 2.6.31-20 is no longer available to re-install.
e.g. linux-headers linux-image-wireless-backports etc etc were able to get a fairly working 2.6.31-20 but most of that kernel version ike I said s no longer available.
So question is. Can anyone shed light where to find the missing 2.6.31-20 #58 stuff so we have access to a full downgrade? Any information taht could help get a full downgrade to 2.6.31-20 #58.
I just installed Ubuntu 10.10 I love it. The only problem is my built-in mouse doesn't work. My usb mouse works fine but not the built-in one. When i was installing Ubuntu i used the USB mouse, The only problem is my mum needs it for her computer.
View 1 Replies View RelatedI recently installed Ubuntu x64 on my dell studio 1535 using the windows installer (wubi).
All seems to be working fine apart from the built in wireless card, the proprietary driver (found in hardware drivers) installs and activates successfully and works perfectly. Until I shut down or restart the system. On the next boot the wireless card is 'disabled' and no longer works.
The card I have is a Broadcom Corporation BCM4312 802.11b/g
I am going to try a proper install on a second partition rather than using wubi later on but wondered if this was a commonly occuring problem?
The wireless card works as soon as the driver installs, however I am shown a "restart to activate driver" message and after restarting it's dead.
I'm having trouble with the webcam on my laptop. This is a full-sized laptop, not one of the Eee models.I'm not entirely sure what the model or chipset of the webcam is, as there doesn't seem to be much documentation available (as far as I know, this is Asus' first foray into the laptop market in the US).
I previously had the camera working just fine in Windows Vista, so I know the hardware is just fine. I have tried several programs to get the device working, and some (Cheese, for example) are able to get the green light next to the camera to turn on. I've tried running a number of programs as both the normal user and as root, but I don't seem to be able to get the camera to output video. I didn't see any drivers on the Asus site. Is anyone able to lend a hand with this? I'm moving out of the country in a month, and would really love to be able to keep in touch with my family and friends over skype or something similar.
EDIT: In programs like Cheese, the webcam seems to be detected as "USB2.0 UVC PC Camera (/dev/video0)". I imagine it's a good sign that video0 is available.
Since some days a try to activate my web cam in a Sony VAIO VGN-FZ21Z. I had no success in openSUSE 11.3, neither Gnome nor KDE, neither 32 bit nor 64 bit. (It works in VISTA, not in Fedora and not in Mint).
Code:
alfredo@linux-7zs0:~> lsusb
Bus 001 Device 002: ID 05ca:183b Ricoh Co., Ltd Visual Communication Camera VGP-VCC8 [R5U870]
Kopete: no web cam.
Linux UVC drivers: -; Gspca: -; Microdia: -.
Searching for "R5U870": links lead to old sites or ERROR.
How to get a built in fingerprint scanner to work with linux? the device was installed on my laptop when i initially ordered it, i have a dell studio 1735 (i think its 1735) and i would like to use it with my linux. by the way im running mandriva.
View 6 Replies View RelatedI'm running into an issue on my fedora installations getting sudo insults to work. I'm fairly new to the distro, but in other distros, I just had to add insults to the Defaults line within visudo. Then I could sudo -K to reset my sudo session and it worked.
Since I installed sudo from yum, I suppose it's possible that insult support is not built into the rpm. I'm sure others got it working and I was hoping not to have to manually compile sudo with insults support as I don't want to break yum for updates/upgrades. If that's the only option, I'm more than happy to go that route, just would like it as a last resort.
I have a really weird one. This may be a putty issue, or it may be a config issue in Ubuntu. I've no idea who to blame. I have four machines involved in my little issue that has me scratching my head on where to even BEGIN to diagnose what is going on. The computer I'm attempting to connect to (For identification purposes, I'll call it the main machine) is running a relatively new install of KUbuntu 10.04, stock install of openssh daemon. ufw is disabled, firewalls are off, etc, and I can prove that later.
The machine acting odd is a Win XP 32 bit running Putty. Haven't had a problem until this reload of the previously mentioned machine. A Work machine that is running RedHad of some flavour. A Virtual Machine running a headless setup of Ubunto 8.04. Now that the introductions are over, here is a quick map of the machines that can successfully connect with. My major problem is that I cannot get SSH (And ONLY SSH) to work between the XP machine and the main machine.
Work -> Main = Works
Work -> VM = Works
XP -> VM = Works
XP -> Main = Fails
XP -> VM -> Main = Works
Main -> Main = Works (IE: "ssh localhost")
VM -> Main = Works
When I try to get the XP machine to connect to the Main machine, I get an error with Putty saying:
"Server sent disconnect message
type 2(protocol error):
baad service request ssh-connection"
I've changed Putty to try using SSH Protocol 1 only, but it says the protocol isn't installed on the Main machine, which is true. I've tried setting just 1, and it gives me the error, and I've tried setting it to "2 only" and it again comes up with the error. I went into /var/log as root on the Main machine, and did a "tail -n0 -f *" and then tried to connect, but nothing relevant shows up.
As for the proof that the firewall is disabled, three of the machines are working with Synergy, I am able to swap between all three of the machines without a problem, I can get to WebAdmin from the XP machine to the Main machine, and I can open a Samba share from the XP machine to the Main machine without a problem. This sounds like a protocol issue, but I can't see anything in WebAdmin that'll put me in the right direction.
I'm using Ubuntu 10.04 on Acer Aspire 5536. Used efax-gtk debian unstable package v3.2.3 to send a .ps file. Even by running software with root privileges the output is:
Code:
Socket running on port 9900
efax-0.9a: 11:28:27 opened /dev/ttyS1
efax-0.9a: 11:28:27 Error: tcgetattr on fd=7 failed: Input/output error
[code]....
Decided to first get ride of input output error. using sudo wvdialconf /etc/wvdial.conf command:
Code:
Editing `/etc/wvdial.conf'. Scanning your serial ports for a modem.
Modem Port Scan<*1>: S0 S1 S2 S3
If you still have problems, send mail to <wvdial-list@lists.nit.ca>. Using setserial command returned a huge syntax text. Modem is recognized under windows and it is HDA CX11270 Softmodem. How can I get it to work?
I have SSH -X working fine, displaying stuff that's running on the remote machine on my local machine. But how do I display on the remote machine? I did this many years ago on unix and seem to recall that this was either default or a simple case of setting DISPLAY....
View 3 Replies View RelatedI'm running Ubuntu 10.04 Server. I can't get my Wireless Card & Wired Card to work at the same time. My interfaces file is incorrect, when I comment out 1 of the interfaces the other works. I have attached my interfaces file.
View 2 Replies View Related