I have SSH -X working fine, displaying stuff that's running on the remote machine on my local machine. But how do I display on the remote machine? I did this many years ago on unix and seem to recall that this was either default or a simple case of setting DISPLAY....
View 3 RepliesI'm having trouble displaying Xwindows programs on a remote machine. If I run "ssh -X newmachine" and I login and then run a program like xclock, I get the error message:
Error: Can't open display: localhost:10.0
If I run the same command to an anothermachine which is running Ubuntu 8.04 it works fine and xclock displays on my localmachine. If I run the command "echo $DISPLAY" on newmachine, I see:
localhost:10.0
Also, I have checked and xauth is installed on newmachine. What setting I have to change on Ubuntu 10.04 to allow remote display of Xwindows programs?
In the past, when I open a gvim session on a remote machine, the title bar of gvim would show the machine name in brackets. I am not sure if this was done by the remote gvim itself, or the local window manager. In the past I have used gnome2, although I am currently using unity (and finding it rather frustrating). Is there some setting I can change to always force remote windows to display the source machine?
View 1 Replies View RelatedHow do you transfer files on a Linux machine with ftp,sftp and scp disabled onto a remote machine
View 2 Replies View RelatedWhenever I put ssh into remote machine am getting the following messages. Write Failed: Broken Pipe (After logged into that machine ) Read Socket Failed: Connection reset by peer (While trying to log in ) Also known_hosts file is changed frequently.
View 1 Replies View RelatedIs there any way to redirect a remote Linux machine mplayer output audio to local one?
View 2 Replies View RelatedI am struggling to figure out why I cannot display GUI applications from one of the Sun Solaris 10 servers (named espresso) on the network over to my local Linux workstation (beluga). Seems to work perfectly fine when I use my other Solaris 8 (stoli) box for display.Here is what I do, the part that works fine:
stoli: xhost+
stoli: rlogin espresso
espresso: setenv DISPLAY stoli:0.0
espresso: oclock
Now trying the same thing over to linux box, beluga, and it fails with message "Error: Can't open display: beluga:0.0":
beluga: xhost+
beluga: rlogin espresso
espresso: setenv DISPLAY beluga:0.0
I have made a shortcut on desktop and want that one to ssh from machineA to machineB and run a command.I have fixed the .pub file so I can ssh without password.This is what I want to doPHP Code:ssh -X user@machineB && start-the-program ..but it seems to not run the command after "&&".How can I do to make it automaticly run a command after it has connected over ssh?
View 5 Replies View RelatedI'm wondering if it's possible to control a TTY on a remote machine via SSH. I'm aware of ssh's -t option, but it doesn't seem to do what I want. Basically, I'm thinking in terms of VNC-like operation, where the remote user and local user see the same thing, only instead of a GUI, they both see TTY1 (or 2, or etc). Is that doable, or no?
View 3 Replies View RelatedHostname: Borg
OS: Lucid Lynx
Kernel: 2.6.32-24
Problem:
1. borg > xhost +
2. borg > ssh <anyuser>@<anyhost>
3. anyhost > export DISPLAY:<borg's IP>:0.0
4. xclock
NOTHING HAPPENS!!!! Any ideas? Here is what I have tried thus far.
Efforts:
1. gdmsetup - looked for security tab, doesn't exist
2. installed gdm2setup - still not there
3. looked for gdm.conf - not there
4. when doing ps -ef|grep X - there is a -nolisten tcp "could this be culprit" hmm not sure
5. modified /etc/ssh/ssh_config to Forward X
I can ssh from my local machine (Ubuntu 10.4 64bit) to a remote Linux server. When I try to copy a file back to my machine (or just ssh to my machine) I get the following error - "port 22: No route to host".ifconfig on my local machine gives one ip address for "lo Link encap:Local Loopback" and one for "wlan0 Link encap:Ethernet"; I tried ssh both.I work on a laptop with a wireless router (which is also the modem)
View 6 Replies View RelatedI ran the following commands on my ubuntu desktop :
xrandr --output VGA-0 --mode 1680x1050
xrandr --output VGA-1 --mode 1680x1050
xrandr --output VGA-1 --left-of VGA-0
This gives me dual head. I have a second machine on the same 100mbps network that is also running Ubuntu. I want to run X on that machine and have it's X session as a monitor in xrandr, so I would add something like this :xrandr --output REMOTE-1 --right-of VGA-1Is this possible?
I am running a local webserver mainly for development. I have everything set up. The issue I currently have is that I cannot shut down the machine from the command line. I can issue the command but the machine remains on. I also cannot get to the desktop via VNC.The reason for this, is that there is no monitor attached so Ubuntu says that it is trying to run in Low Graphics Mode. I found this out as I plugged the monitor in to my server.So question is, how do I get around this? How can I set up Ubuntu to get past this, or do I need to install Ubuntu Server?
View 3 Replies View RelatedI set up a print server with a USB printer attached. I can remotely bring up CUPS and print a test page, but I would like to be able to add a printer in windows like I normally would. Add printer, network work printer and so on, but I am not sure how to implement this on Ubuntu server. Do I need to use IPP or do I have to share it out using Samba? Oh, my server does not have a graphical desktop, it is strictly console based.
View 1 Replies View RelatedI'm try to assess the viability of of setting up remote administration on a distant machine. Just for background, the computer I wish to administer is located on a boat in Southern Ireland while I'm in SE England. Sadly, the the boat operator is a far better fisherman than computer user and every now and then some rogue sensor numbers get captured by the boat's computer and these eventually need operator intervention. Anyone who has tried to talk a non PC literate user through correction routines over a dodgy mobile telephone while the said user is trying to operate mouse/keyboard in an Atlantic swell will appreciate the problem.
However, there is a fairly good mobile phone broadband signal available in the area so I was wondering if there was anyway I could set up a point to point connection with the boat over this medium. That would allow me to administer the machine remotely.
I ssh connect with a remote machine and have to use emacs.But emacs run only in term-mode. does anyone have a solution how can i run emacs in graph mode in the remote machine
View 1 Replies View Relatedow do you remotely shutdown an XP host from a linux machine? I know that you can use shutdown /s /f /m IP_GOES_HEREFrom windows, but how would you do that from linux? (wine does not port the shutdown command)
View 4 Replies View RelatedI have a VPS by my host running on a linux server, and they have given me SSH access. Is it possible to remote desktop into the server, like you can on Windows, so that I can physcially click on things rather than having to use SSH commands?
Surely this must be running on Fedora or Ubuntu etc. so there is some type of OS. You would probably have to install something on the servers end I suppose but just want to know if its possible and what the options are.
I have looked for clues in the sshd.conf etc. But I can't really find anything that give me a hint of why fedora 14 keeps blocking my access.I get all the way into the ssh interface.
login as: xxxxx
xxxxx@xx.xx.85.216's password:
Access denied
xxxxx@xx.xx.85.216's password:
Access denied
xxxxx@xx.xx.85.216's password:
So it's not a firewall problem and the port forwarding is working fine. I am using putty to access the machine remote.Anyone have any ideas of what I need to set in ssh or sshd.conf. I am expecting to login with password not with keys.
I want to access the remote machine I already login, but I forget the machines name, how can I find the machine name then?
View 3 Replies View RelatedI am running hummingbird exceed on Workstation with an ip address of a.b.c.d, and connecting to a sun machine with IP address x.y.z.w running Solaris with XDMCP. From the sun machine, we commonly telnet to other sun and linux machines and run X applications.
We have just installed ubuntu 10.04, and I can telnet into that machine no problem.
However, running xterm on the ubuntu machine fails:
xterm Xt error: cannot open display a.b.c.d:0.0
There is a way to make a remote access from a Ubuntu Linux to a Windows 7 machine using RDP(Remote Desktop Protocol)? I use "mstsc.exe" for Windows to Windows connections. What is like "mstsc.exe" that I can easily run from Ubuntu?
View 1 Replies View RelatedI am having trouble to make my SSH server working with remote machine.
Code:
telnet 192.168.1.102 22
PHP Code:
[Code].....
im trying to use ddrescue to clone a dying disk to a remote machine using ssh. this is my command:
Quote:
sudo ddrescue --block-size=4KiB /dev/sda1 - | ssh user@address 'cat /data/backup.img'
it returns the error "cat: can't open '/data/backup.img': No such file or directory"
I have had a look at the the information on the ubuntu forum about this but am having trouble getting the server to do what i want it to do.
I have a VPS running ubuntu 9.10 and i am trying to set it up to redirect port 25 to a remote machine via a VPN connection (remote machine connected via VPN)
i have tried setting this up in the firewall using webmin but it is not working.
I am connecting to remote Linux PCs via ssh, to update software and do other tasks. I want to send a notification to the remote PCs screen (eg, "Do not run program X, it is being updated now"), so the users do know what is happening.
Is there a reverse way for ssh -X host so I can connect to a remote Linux machine and run notify-send and it appears on the other display?
my local box is centos 5.5 running gnome.
I have a eucalyptus instance (vm) running an older version of centos (5.3?). As a vm it has no graphical display. I'd like to run a graphical app there so that it displays back on my local machine.
Used xhost locally and it shows the remote IP (eucalyptus instance) as enabled. On the remote side (eucalyptus instance) I set DISPLAY with:
export DISPLAY xx.xx.xx.xx:0.0
where xx.xx.xx.xx is my local ip address. Oh, I did install X in the vm instance (yum groupinstall "X Window System"). X is installed but not running there (does the point of origin of the x app need to have X running as well - and what does this mean in a vm which is a non-graphicla environment?).
Anyway, I try to run (from remote to local) xclock and get the typical
Error: Can't open display.
I cannot remote desktop to the Debian machine from anywhere,hether within the same network, or on a different network elsewhere. Also, the personal wiki I set up on it to be viewed via a normal web browser cannot be accessed, either. Both time out when attempting to connect to them. I can still ping the Debian machine when on the same network, though.
This started some time ago when we had a failure occur on our main server.had to powercycle everything in order to restore things back to normal, the Debian machine included. Since that time, this problem started to occur. This is a major thorn in my side in attempting to prepare for our website to move,I've been unable to figure out how to fix it.Originally, I thought it would be something in between the Debian machine and anything else, which would mean something like our firewall box or our hardware switch was the problem. But the tech support people who maintain those for us confirm that there is nothing wrong with them, so now I'm not certain anymore.
I just started to run Fedora/Linux on my laptop... I was using XP and using putty to connect to Linux servers at work. I am assuming I can use the terminal editor supplied with Fedora to connect to remote linux server? Can I uses the terminal to connect to remote linux server? How do accomplish this?
View 6 Replies View RelatedI have had a notebook with an ethernet plugged in cable before, sent a signal through the cable by resetting my router, and it switched my notebook on from cold. My question is, is there a way of doing this using a remote desktop client. Ideally, I would like a machine switched off at home running suse linux/windows, then have a client computer sent the remote request, this in turn activates the machine, which boots and then gives the rmote client control.
View 4 Replies View Related