Ubuntu :: Asrock Ion Built In IR Wont Work With The Drivers?

Jun 15, 2010

Ever since newer karmic kernels 2.6.31-21 and 2.6.31-22 the Asrock ion built in IR wont work with the drivers Asrock provides even though they have since then provided drivers for 10.04, which still doesnt fix the issues with the remote (just doesnt work)

THE PROBLEM

The solution is of course to downgrade kernel to 2.6.31-20 #58 which remote works fine and newer script version introduces a fix to this. However looking at the available packages seems that most of the kernel 2.6.31-20 is no longer available to re-install.

e.g. linux-headers linux-image-wireless-backports etc etc were able to get a fairly working 2.6.31-20 but most of that kernel version ike I said s no longer available.

So question is. Can anyone shed light where to find the missing 2.6.31-20 #58 stuff so we have access to a full downgrade? Any information taht could help get a full downgrade to 2.6.31-20 #58.

View 1 Replies


ADVERTISEMENT

OpenSUSE Hardware :: Asrock - Cannot Get Sound To Work

Mar 12, 2011

I can not get my sound to work I have a openSUSE 11.3 on an Asrock. it is a driwer for 5.1 CH HD Audio (via vt1705 audio codec) is missing or not functioning.

View 9 Replies View Related

Fedora X86/64bit :: FC12 Rt2870 Drivers - Built Into DVD ISO?

May 22, 2010

I just installed the Fedora 12 live CD, but the driver for my EnGenius EUB 9801 (rt2870) USB WiFi adapter is not installed. I tried some of the suggestions found on this forum, but since I'm new at Linux I haven't yet been successful with installing the driver.

Does anyone know if the much larger DVD ISO already contains the driver built-in for the rt2870 for Fedora? If so I'm thinking it would be easier (for me) to just download the DVD ISO and re-install FC12 using that to get my WiFi USB adapter working.

View 5 Replies View Related

Fedora Networking :: Patching Rpm Built WiFi Drivers

Apr 28, 2011

I have been trying to get aircrack-ng program to get to work but apparently i needed a negative-one-channel-maxim patch in order for it to work successfully. I have looked over wiki of aircrack and followed the guide a few times but every time my compiled module was rejected my modprobe.

View 1 Replies View Related

Fedora Installation :: Madwifi Wireless Drivers For Built In Atheros Adapter?

Nov 19, 2010

I'm using LiveCD to test my laptop with FC 14. It booted from the LiveCD image last night, but my wireless didn't work. I need the madwifi wireless drivers for my built in Atheros adapter.

Can I download the latest and greatest madwifi drivers, compile them and use them while running from the LiveCD image?

View 4 Replies View Related

Ubuntu :: Get Built In Webcam / Microphone To Work

Jan 7, 2010

I have a Dell system with a Dell SP2309 monitor. I have been told it's supposed to have a built in webcam and microphone. How can I chek to see if this is true and if so...how do I get them to work?

View 3 Replies View Related

Ubuntu :: Built In Webcam Won't Work On TinyChat?

Jun 5, 2010

I've tried my built in webcam with TinyChat and it wont work. It works on some other programs, but for some reason TinyChat can't find my webcam.

I have an HP Pavilion dv2000 and a built in webcam with it. I'm currently running Ubuntu v.10.4 LTS

View 2 Replies View Related

Ubuntu :: How To Get Built In Mic To Work On Asus 1005HA

Jul 4, 2010

I have ubuntu netbook remix on my netbook and how Do I wondering how to get the built mic working. I am wondering how to get the built mic workin. My camera works perfectly but not the mic. When I make vids on ....., there is no sound!

View 1 Replies View Related

Ubuntu :: Built In Laptop Mouse Doesn't Work?

Oct 30, 2010

I just installed Ubuntu 10.10 I love it. The only problem is my built-in mouse doesn't work. My usb mouse works fine but not the built-in one. When i was installing Ubuntu i used the USB mouse, The only problem is my mum needs it for her computer.

View 1 Replies View Related

Ubuntu :: 904 Can Work On Old Computer Machine With Built In Ati Display Card

Aug 13, 2011

i found ubuntu 904 can work on my old computer machine with a built in ati display card.updating as it return a message saying that the repository may not be available..

View 4 Replies View Related

Hardware :: Getting The Built-in Webcam To Work On An Asus X83Vb-X2 With Ubuntu 9.04?

Jun 29, 2009

I'm having trouble with the webcam on my laptop. This is a full-sized laptop, not one of the Eee models.I'm not entirely sure what the model or chipset of the webcam is, as there doesn't seem to be much documentation available (as far as I know, this is Asus' first foray into the laptop market in the US).

I previously had the camera working just fine in Windows Vista, so I know the hardware is just fine. I have tried several programs to get the device working, and some (Cheese, for example) are able to get the green light next to the camera to turn on. I've tried running a number of programs as both the normal user and as root, but I don't seem to be able to get the camera to output video. I didn't see any drivers on the Asus site. Is anyone able to lend a hand with this? I'm moving out of the country in a month, and would really love to be able to keep in touch with my family and friends over skype or something similar.

EDIT: In programs like Cheese, the webcam seems to be detected as "USB2.0 UVC PC Camera (/dev/video0)". I imagine it's a good sign that video0 is available.

View 1 Replies View Related

OpenSUSE Hardware :: Built In Web Cam Ricoh Does Not Work?

Sep 11, 2010

Since some days a try to activate my web cam in a Sony VAIO VGN-FZ21Z. I had no success in openSUSE 11.3, neither Gnome nor KDE, neither 32 bit nor 64 bit. (It works in VISTA, not in Fedora and not in Mint).

Code:
alfredo@linux-7zs0:~> lsusb
Bus 001 Device 002: ID 05ca:183b Ricoh Co., Ltd Visual Communication Camera VGP-VCC8 [R5U870]
Kopete: no web cam.
Linux UVC drivers: -; Gspca: -; Microdia: -.
Searching for "R5U870": links lead to old sites or ERROR.

View 2 Replies View Related

General :: Built In Fingerprint Scanner To Work

Mar 23, 2010

How to get a built in fingerprint scanner to work with linux? the device was installed on my laptop when i initially ordered it, i have a dell studio 1735 (i think its 1735) and i would like to use it with my linux. by the way im running mandriva.

View 6 Replies View Related

Fedora Installation :: Getting Sudo Insults To Work - Not Built Into The Rpm

Jan 21, 2009

I'm running into an issue on my fedora installations getting sudo insults to work. I'm fairly new to the distro, but in other distros, I just had to add insults to the Defaults line within visudo. Then I could sudo -K to reset my sudo session and it worked.

Since I installed sudo from yum, I suppose it's possible that insult support is not built into the rpm. I'm sure others got it working and I was hoping not to have to manually compile sudo with insults support as I don't want to break yum for updates/upgrades. If that's the only option, I'm more than happy to go that route, just would like it as a last resort.

View 1 Replies View Related

Software :: Uninstall Drivers And Get It Work Again Without ATI Drivers?

Jan 15, 2010

when I boot into Fedora right before the login screen I get a black screen with a command line.How can I uninstall the drivers and get it work again without ATI Drivers? I have switchable graphics and for Fedora have to switch them in the BIOS but with integrated as well as discrete graphics I get the same black screen.I have the LiveDVD ready and only need advice on howto log in in text mode or recover via LiveDVD.

View 1 Replies View Related

Hardware :: Getting Acer 5536 Built-in Modem Conexant CX11270 To Work With Efax-gtk?

Nov 13, 2010

I'm using Ubuntu 10.04 on Acer Aspire 5536. Used efax-gtk debian unstable package v3.2.3 to send a .ps file. Even by running software with root privileges the output is:

Code:

Socket running on port 9900
efax-0.9a: 11:28:27 opened /dev/ttyS1
efax-0.9a: 11:28:27 Error: tcgetattr on fd=7 failed: Input/output error

[code]....

Decided to first get ride of input output error. using sudo wvdialconf /etc/wvdial.conf command:

Code:

Editing `/etc/wvdial.conf'. Scanning your serial ports for a modem.

Modem Port Scan<*1>: S0 S1 S2 S3

If you still have problems, send mail to <wvdial-list@lists.nit.ca>. Using setserial command returned a huge syntax text. Modem is recognized under windows and it is HDA CX11270 Softmodem. How can I get it to work?

View 1 Replies View Related

Ubuntu :: Wireless Does Not Work + Printer Drivers So Buggy + MP3 Players And Digital Cameras Not Work?

Jul 7, 2010

I wanted some input on chronic problems with Ubuntu:

1. Why does wireless almost never work right on Ubuntu?

2. Why, when Ubuntu just decides to turn off my wireless card, can I not just turn it back on?

3. Why do tar balls almost never unpack right?

4. Why are printer drivers so buggy?

5. Why do my MP3 players and digital cameras not work with Ubuntu?

I spent 3 hours last night trying to unpack a tar.bz2 file so I can run my Ralink network card. It worked fine until my son unplugged my computer. Now my card is disconnected and it will not reconnect. When I check forums no one has a simple answer for something as simple as turning a network card back on. On my Apple, it's simple: click my wireless icon and hit "on." tell me an easy way to just turn my wireless card back on, it would renew my faith a little in Linux.

View 4 Replies View Related

Fedora Installation :: Dell Vostro 1700 - Input Doesn't Work Correctly Neither Built In Microphone

Mar 20, 2009

I've installed fc10 but I got some problem with the audio driver for my Dell Vostro 1700. In particular line input doesn't work correctly neither the built in microphone, neither the line input. Is there a special driver?

View 3 Replies View Related

Ubuntu :: Install 11.04 On An Asrock?

Jun 14, 2011

I am thinking of buying an Asrock Ion 3D 152D D525, 2GB, 320GB, can anyone let me know if it is possible to install Ubuntu 11.04 on this machine or will I have problems with drivers etc.

View 2 Replies View Related

Ubuntu :: Asrock ION 330 - No Sound With HDMI To TV On 9.10

Jan 1, 2010

Trying to put up my HTPC with Ubuntu 9.10 but I cant get any sound to work. Im using a HDMI cable between the pc and TV. Computer is an Asrock ION HT/BD 330. Also running a 64 bit version of Ubuntu. I have upgraded all I know or think I know what to do but still with no luck. To start of heres my multimedia.

*-multimedia
description: Audio device
product: MCP79 High Definition Audio
vendor: nVidia Corporation
physical id: 8
bus info: pci@0000:00:08.0
version: b1
width: 32 bits
clock: 66MHz
capabilities: pm bus_master cap_list
configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2
resources: irq:23 memory:fae78000-fae7bfff

my cat /proc/asound/version is as follow
Advanced Linux Sound Architecture Driver Version 1.0.22.
Compiled on Dec 17 2009 for kernel 2.6.31-16-generic (SMP).

My lsmod is as follow:
Module Size Used by
vfat 13184 0
fat 59832 1 vfat
binfmt_misc 10220 1
ppdev 8232 0
snd_hda_codec_nvhdmi 6304 1
snd_hda_codec_realtek 288292 1
snd_hda_intel 30208 0
snd_hda_codec 96384

My modinfo soundcore is as follow
filename: /lib/modules/2.6.31-16-generic/kernel/sound/soundcore.ko
alias: char-major-14-*
license: GPL
author: Alan Cox
description: Core sound module
srcversion: 3A50BBE947364A4D9DB6A97
depends:
vermagic: 2.6.31-16-generic SMP mod_unload modversions

View 7 Replies View Related

Ubuntu :: Starting Up APP Over Ssh On Asrock 330ht?

Apr 22, 2010

I'm setting up another xbmc machine. This one is a asrock 330 machine. My other machine is running ubuntu 8.10. I have a script that I use on my other machine, so that when I hit a button on my remote it will kill xbmc if its running and start xbmc if it is not. This script works without any problems on my other pc. When i try and run in from the ssh terminal on the asrock I receive the following log statements.

I should add, i installed ubuntu 9.10 on the asrock. I then installed xbmc using the ppa repositories. So i guess this is the full blown gdm installation with xbmc on top of that. The final goal is to then configure irexec to use this script to start and stop this application on the main gdm desktop.

I'm a beginner to linux configuration and just get by from reading peoples tutorials on how to setup their machines.

Code:
xbmc@xbmc-desktop:~/scripts$ ./startStop.sh
xbmc@xbmc-desktop:~/scripts$ No protocol specified
/usr/lib/pymodules/python2.6/gtk-2.0/gtk/__init__.py:57: GtkWarning: could not open display
warnings.warn(str(e), _gtk.Warning)

[Code]....

View 1 Replies View Related

Ubuntu Installation :: Asrock 890 Deluxe 4 Won't Boot

Nov 18, 2010

i cant get ubuntu to install on this board live usb ,desktop, alternate or cd alternate nothing i can get to the screen where you choose options i can pick the things i want and hit enter then get a non blinking cursor the board is pretty new so i can t seem to find anything about it Google gives me a few people running Linux on it if i use the alternate i get to the detecting hardware section and it locks up.

i installed the wubi but that wont work either there is a short 5 second splash screen the te1lls you to push esc for options ive tried all the options and it wont boot either i have even tried the newest fedora it locks up just about the same place. i wonder if its a bios setting or some acpi stuff but i dont know this board even offers usb3 and sata 3 so is linux just lagging behind a bit? i tried emailing asrock and got a bad English response saying they offer no linux support

Quote:

ASRock support Windows OS does not support any Linux version. what to do what to do ? i am currently running xp64bit it runs boots and loaded fine with no tweaking but i cant use winblows

specs as it sits:

asrock 890fx deluxe 4
amd 6 core proc
ati video
ocz ddr3 ram
wd sata 320 hdd
ide dvd burner and dvd rom

View 3 Replies View Related

Ubuntu Installation :: AsRock Core Audio Over HDMI?

Jan 28, 2011

I've a problem with my AsRock Core and my audio over HDMI. Trying to get it work now for over 2 months.On Ubuntu 10.04 it was working with the offical Realtek HDA Intel driver for Linux but on Ubuntu 10.10 the driver installation failed.

Code:
Linux myMachine 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:44 UTC 2011 x86_64 GNU/Linux
aplay -l
Code:
**** List of PLAYBACK Hardware Devices ****

[Code]...

View 9 Replies View Related

Fedora Installation :: ASRock ION 330 And F10 (Run Level 5)

Jul 27, 2009

I have recently purchased an asrock ion 330. I have done a fresh install of fedora 10. All initially appears fine. When I modify etc/inittab to run level 5 I start getting problems. When fedora boots tty1 never gets to the login prompt. It stops with 'fuse init (api version 7.9). I don't get the desired graphical login. If I reset to run level 3 it boots fine To the text console and I can login and startx with no problems.

View 14 Replies View Related

Ubuntu Multimedia :: ASROCK 330 ION And GeForce 7300GS - Lspci Cannot Detect Both?

Jul 7, 2010

I installed a secondary Nvidia GeForce7300GS 256 PCIe video card in an ASROCK ION 330 motherboard. The idea is to provide an S-video output. The interesting bit is that lspci shows only one of the two cards. If I set the ION video adaptor primary in BIOS, then lspci will detect only ION, if I set the PCIe video card then lspci will detect the GeForce 7300GS. I'd like to write my own xorg.conf, but how can I refer to drivers without the pci bus address?

View 2 Replies View Related

Ubuntu Multimedia :: Alsamixer Not Working - ASROCK CORE 100HT

Sep 11, 2010

i just bought a ASROCK core 100ht and installed ubuntu 10.04.

My speakers and headphone works fine but my microphone is not working, a common problem. Usually i solve it through alsamixer. However my Alsamixer shows only " Master PCM S/PDIF Capture " (see pic)! And no microphone option. Does anyone knows what is going on?

these are few of my outputs :

francesco@checco:~$ cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfbcf0000 irq 22
francesco@checco:~$ amixer
Simple mixer control 'Master',0

[Code]....

View 3 Replies View Related

OpenSUSE Hardware :: AsRock K8A780LM Crash On Printing

Jun 19, 2010

if have a problem with a K8A78LM Mainboard from AsRock. If I try to print something, the mashine freez. A echo "Hello World" > /dev/lp0 send only 2 or 3 chars to the Printer.

View 1 Replies View Related

Ubuntu :: Asrock Z68 Pro3 - 10.04lts - Video - Cannot Get The Resolution Higher Then 1280*1024

Aug 4, 2011

I got myself a brand new pc, it has an asrock z68 pro3 motherboard and an i2500k proc. the screen is a dell u2311h the problem is i cannot get the resolution higher then 1280*1024. with 10.10 the monitor works perfectly, but the system crashes. so i want to use 10.04, which seems quite stable on my hardware.

View 2 Replies View Related

OpenSUSE Multimedia :: Sound Too Silent On Asrock N68C-S UCC Motherboard?

May 7, 2011

I tried to listen mp3 on in, but it was too silent (of course, I tried to put speakers to be louder).. I switched to winXP (as a second OS) on this computer, and sound volume is ok, so I suppose it's problem in OpenSuse... I have ASROCK N68C-S UCC motherboard with nForce 630a sound chip on it.

View 2 Replies View Related

Debian Hardware :: No Driver For Onboard Network Card - Asrock H97M ITx / AC

Sep 28, 2014

The ethernet adapter on my Asrock H97M ITx/AC motherboard isn't recognized during install. It's a Qualcomm Atheros AR8171 and none of the available options like alx or e1000e are working.

I originally tried to install openmediavault [URL] .... - which is based on debian - from an USB Stick and only came up tothe point where it tries to recognize the network card. It couldn't and promted me to choose one manually. So I checked the specs of my motherboard (a shiny new Asrock H97M ITx/AC with a Qualcomm Atheros AR8171) and after a short search I narrowed it down to alx or e1000e. Both of which only triggered a short flash of the interface and nothing more. I guess that's linux' way of sticking its tongue out at me.

For the last 2 days I therefore searched high and low and came across many possible solutions that either didn't work or included too much linux lingo that I couldn't understand it.

One solutions was to install a vanilla debian and then somehow install OMV over it, but debian itself couldn't recognize the network card either. So now I have a pretty minimal debian (CD1 install only) running but how to make it recognize and use the onboard network device.

Just out of curiosity, I plugged in an old hard drive with Win7 that hasn't been updated for at least 10 months. It only had a driver for AR8131 and warned me of using that, but it worked totally fine. Debian however doesn't even try to use an old driver but just flashes its interface at me.

Is there a way to make it work or is this board just not supported by debian and I have to resort to some other distro or a windows installation?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved