Ubuntu :: 10.10 LiveCD Grub Error?
Oct 17, 2010
So Im running windows, but I want to switch back to ubuntu. I have a spare hard drive for my laptop, so this is a basic one partition on one drive setup. The problem I'm having is the cd or dvd will not boot. I keep getting the grub error, rescue mode. I've read many of the other posts, but they are dual/triple boot, multiple drives, upgrades etc. I don't need any of that nonsense, just a simple explanation as to why the many copies of 10.10, and one of 10.4 give me the same error.
View 3 Replies
ADVERTISEMENT
May 23, 2010
I have a Windows / Ubuntu dual boot system and I recently upgraded my system to 10.04 from the package manager. I ran into what seem to be not an unusual issue with the new version of GRUB2 being installed hosing up the MBR. When I try to boot now I get a message stating: the symbol 'grub_puts_' not found.
There are a few posts and solutions out there about the issue... but the most promising ones, using the Ubuntu 10.04 liveCD don't work for me. The GRUB changes don't seem to stick. It's almost like I'm doing all the grub command line work in a virtual system that gets wiped out as soon as I reboot.
For reference, here is one of the posts I've been working w/, some links in there seemed very promising, but again nothing seem to stick for me from the liveCD:[URL]..Should I be using some rescue disk of some sort? Or is there a way to boot directly to a command line from the Ubuntu CD menu?
View 9 Replies
View Related
Jan 20, 2010
I was thinking of trying to install Window XP in a dual boot fashion but with the purpose of trying to configure wine to use it as it base instead of its normal setup. Only thing is Ubuntu is the sole controller of my laptop here atm and as you know installing XP will remove grub as boot controller. And while I know about SuperGrub I was wondering how, if possible,do I re-install grub from Karmic's LiveCD?
View 2 Replies
View Related
Jan 25, 2011
I installed Windows after installing Ubuntu. But Ubuntu is still intact in its partition.
I'm trying to run the Ubuntu LiveCD to recover grub, but the LiveCD no longer works. It stops the boot process and does not load completely.
I can not run Ubuntu in live mode to recover grub.
Is there any way to recover the grub/grub2 without the LiveCD?
View 2 Replies
View Related
Aug 12, 2011
I have a system without a cd reader so i dd'd the livecd iso (I'm stuck with 7.10) to a partition. I can boot the system with grub4dos by loading the kernel and ramdisk. Is there a kernel parameter I can append so I can change the keymap like I was able to by pressing F3 in the cd boot menu?
View 2 Replies
View Related
Oct 7, 2010
The computer I'm using is a Dell Vostro 1000. If you need any specific stats, let me know and I'll post them, but I don't have access to anything that will list them.
As of this afternoon, Grub will not longer boot. I don't know what prompted it; the only change I made was to the power management settings and installing IcedTea. It brings me to "BusyBox" after saying "No init found. Try passing init= bootarg." Then it brings me to some command prompt that doesn't respond to most bash commands I know, and it says "(initramfs)."
I had that problem two or three weeks ago after Fedora broke Grub, but I fixed it by using "grub-install" in an Ubuntu LiveCD. (No easy task to find what command I needed to use, though.)
But, now the LiveCD won't load. It hangs on the splash screen that just says "Ubuntu" with the dots underneath that indicate it's loading. This exact same disk (and I've reburned it, of course) worked fine when I had to clean up the mess that Fedora made. I tried switching to a terminal at the point where it hangs and there are no messages at all.
I already tried using acpi = off and burning the disk at the slowest speed (from two different computers).
I tried with the Mepis LiveCD, but the GUI just shows a blank screen. I can run commands using Alt+F2, and the cursor is visible, but that's it. I can switch to a terminal, but I can barely use grub-install at all as it is, and I can't figure out how to mount a drive through the command line.
An older version of a Sabayon Linux LiveCD works fine, but, unfortunately, doesn't do anything useful. I haven't tried Knoppix because it never worked on this computer.
If there are any other distros that I can use to run grub-install (preferably lightweight; I'm getting impatient downloading so many 700 mb iso files), I'm open to suggestion. Those are just the ones that I'm familiar with already.
View 4 Replies
View Related
Dec 14, 2009
Make: Fujitsu-Siemens
Model: LifeBook P7120
For some reason (hardware - I am guessing) the LiveCD does not boot on some laptops. The LiveCD worked well on my Dell Inspiron 1525 without any problems but my Fujitsu-Siemens refused to boot up. If you are trying to install or use F12 with the LiveCD ISO image burnt onto a CD on a laptop and fails with the following error:[drm:drm_mode_rmfb] *ERROR* tried to remove a fb that we didn't own Boot has failed, sleeping foreverthis workaround may work for you. Sometimes it will come up with another error about 'Root Device Not Found'
The workaround only works on a bootable USB key for some other reason, created with 'live-usb creator' and not a CD nor a LiveCD image on a USB created on a windows machine. I have tried them all.
[Code]...
View 1 Replies
View Related
Apr 8, 2010
liveCD hangs on the ubuntu splash screen. this is the second time grub has hosed this system (last time was 9.10 upgrade).
View 9 Replies
View Related
Nov 9, 2010
I recently had to reinstall windows on another partition on my hard drive due to there not being any good way to run unrealed under ubuntu (believe me, I've tried everything) Is there a way to install grub from windows without using a liveCD or booting to a USB? I have downloaded WINGRUB and to be fair I have no clue how to use it.I no longer can access my Ubuntu partition.
View 1 Replies
View Related
Sep 18, 2009
I had Win XP on my T61. I installed Fedora 11 from Gnome LiveCD. Now I cant even see GRUB. The laptop boots directly into Win XP. I had the partitions like this:
/dev/sda1 - Win XP - NTFS - 75 GB
/dev/sda2 - Win Recovery - NTFS - 5 GB
/dev/sda3 - /boot - ext3 - 1 GB
/dev/sda4 - Logical extended partition
/dev/sda5 - / - ext4 - 10 GB
/dev/sda6 - swap - 3 GB
Installed GRUB on the MBR (/dev/sda, and not on any partition). Once I completed installing Fedora 11 from the LiveCD and rebooted, the laptop directly boots into Win XP. No sign of Fedora there. How do I get to install GRUB now?
View 5 Replies
View Related
Nov 23, 2010
I have a dual boot system with ubuntu 9.10 x64 and Windows 7. Everything has been working fine for a a long time but yesterday I tried to delete an unused partition through the Disk Utility in ubuntu (System->Adminstration->Disk Utility) and everything was messed up. I used to get the "Grub error: Unknown filesystem". I managed to create an ubuntu bootable usb and followed some tutorials for fixing grub but all i managed to do is to get another error: "Grub error: No such disc". After some experimentation i got
"Grub stage 1.5" which gave me a grub> command prompt./dev/sda is the drive containing Windows and Ubuntu.
Code:
[ Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 0.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #6 for /boot/grub/stage2 and /boot/grub/menu.lst.
[code].....
View 5 Replies
View Related
Jul 8, 2011
I am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
View 9 Replies
View Related
Mar 12, 2010
Using the ubuntu live cd 9.10 I get weird error messages when shutting down the system, sometimes it is this one:
device removed: /freedesktop/Hal/devices/net_80_00_60_0f_e8_00
Other times it is bunch of errors saying something like:
i/o error/end request/dev/sector ****, with all different sector numbers..
These happens even when I have not installed anything, not using any flash drives etc...
View 1 Replies
View Related
Oct 13, 2010
I've just installed Fedora (F13) for the first time, on a new HDD, to give myself a dual-boot system. So currently I have:
So, at the appropriate stage in the install menu, there is an option for where to install GRUB, and a drop-down to choose which drive is the primary BIOS boot drive.
However, in both cases, no other drive except my new sdc is visible. So, I can install GRUB to MBR of sdc, or to first sector of boot partition - but no option to put it to my primary boot drive MBR on sda.
Likewise, in the GRUB configuration page, if I go to Add another OS, the only option it gives me is my new Fedora install. It doesn't list the Vista OS on sda at all.
The result is that I can boot to either OS by changing the boot drive priority in BIOS.
I guess my question is this:
- is this expected behaviour from the installer, meaning that I'll need to configure GRUB manually somehow? (gulp ) or
- did I do something wrong in the install process? or
- is this some weird bug manifesting itself?
View 12 Replies
View Related
May 23, 2010
When I try and boot my Debian computer I get the messages: Grub Loading stage1.5. Grub loading, please wait... Error 15 Is there any way of recovering from this - or is it simply a fresh install? I was attempting an upgrade from Lenny to Squeeze and despite a few hurdles it looked like it was all happening. Got the new kernel loading, and the new grub. It looked as though grub2 was working so I ran the grub-remove-legacy-support command (something like that) and now my computer won't boot grub or Linux.
I'm assuming the MBR on my harddrive is lost, however I don't know what state the partition is in. I'm guessing that maybe this has been lost as well. I tried a few tools from the Ultimate Boot CD but nothing here was able to re-install my grub or boot from any partition or even mount my file-system. I'm fearing the worst but would like it confirmed before I blow it all away with a new install.
View 8 Replies
View Related
Jul 31, 2011
I'm having a problem trying to customize Ubuntu 11.04 LiveCD.Everything went well until I tried to run the system updates on the LiveCD.This is the error message output:
Code:
root@lkjoel-desktop:/# sudo apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
code....
View 3 Replies
View Related
Dec 9, 2009
I want to view movies and livestream on the Internet and I tried many times installing the flash player for my fedora liveCD but still its not working. There always been an error. I been using all the options and installation instruction posted on the adobe site but still I can't find my way in.
View 3 Replies
View Related
Jul 5, 2010
I am certain that the problem is not with the CD. It can boot on my laptop. It's the RC2 of OpenSuse 11.3 Gnome. When I try to boot on my PC, I get the error "No devices matches MBR identifier: 0x502eadc3".I had some problems when installing Ubuntu, with HDD partitioning because it's SATA3. I tried several things, chandged from IDE to ACHI in Bios, then after it didn't work I simply plugged out all of the Sata cables but still the same. It should be because of Bios settings I guess.I have Gigabyte X58A-UD3R mainboard. Please help, I really love OpenSuse
View 5 Replies
View Related
Apr 7, 2010
after doing an upgrade to 10.4 and updating grub I get this message. how do I address this
[Code]...
View 2 Replies
View Related
Jan 31, 2010
I've trawled the internet but can't seem to find the exact same issue, so I've made a new thread. So, I installed Ubuntu onto a 160gb drive. I have other drives in the system, but I disconnected them so that the system drive would be sda. Ubuntu installed perfectly with no issues whatsoever. I connected the other drives in the system, and again it booted up perfectly (although I can't remember whether the 160gb drive remained as sda or became sdd). Then I attached some extra drives temporarily to do some data shuffling.
This moved my system drive to become sdf. My computer booted fine multiple times like this, but when I was finished with the drives I rebooted and suddenly everything broke. For some reason my ubuntu installation showed up in the GRUB twice, and neither of them booted. So, I popped in the Live CD (which I'm using to type this post), and decided to update the grub. I chrooted into my system drive and ran update-grub, but it simply returned something like this:
[Code]....
View 7 Replies
View Related
Dec 16, 2010
I updated yesterday and now when I start my laptop it goes in to grub rescue mode. I have booted from a 'live cd' and thought I could repair grub from there. In gparted however the partition with ubuntu (sda1) is seen as unknown file system, in terminal when I list the partition table it shows up as FAT16 type. When I try a grub-install it gives this error message:
[Code]....
View 9 Replies
View Related
Feb 9, 2010
I know nothing about this at all. I have never programmed a computer.. I loaned my tower to a friend who put this on ...now i have it back and cant get to my windows 98. all i get each time i boot is ...
GRUB loading ... error:no such disk grub recover>
I have tried ubuntu sec 8.4 recover mode and all i get is unreconized command.. i do not know how to set anything.. i have no disks for this not even the orginal windows recover disk.. is their anything i can do to get win to run as it use to??
View 1 Replies
View Related
Apr 13, 2011
I'm currently setting up a dell server with hardware raid 1 on sas 6r. i got 4 sas installed on the server and configured to raid 1 as stated below,
array 1:
slot 0 & 1
array 2:
slot 2 & 3
during the installation, the installer detect the array 2 as sda and array 1 as sdb.. so i proceed with installation on array 2. after completed the installation, the first reboot lead me to a 'grub-rescue" prompt. by following the guide at url Mode, i've noticed that the boot folder has changed to (hd1,1), which i believe it has changed to sdb1. default root device shows that prefix=(hd0,1)/grub.
View 3 Replies
View Related
Oct 3, 2009
i've just burned a livecd (fedora 11), but it doesn't work correctly.it says after i hit boot:
BUFFER I/O error on device sr0 logical block 352328
and then something else, which is similar so i didn't write it down.i read on bugzilla, that is should try to append the boot command with pci=nomsi, but it doesn't work for me
View 3 Replies
View Related
Jul 31, 2011
is it ever possible to do dual booting with grub(legacy) ever at all!. it is possible provided i take some pain, here is the link of that post [URL] i was coward and weak i didn't try that out then. but i did try it out. now so if u haven't seen the post .... I've installed Fedora 15 desktop(Gnome) with physical Logical volume called vg_fedora lv_root(ext4) ,lv_swap and lv_home(ext4), with 500MB /boot partition and had about 200GB free hard disk space ... so i wanted to install Scientific Linux 6.1 (because our school uses RHEL 6.1)
so, while running the installer I made (added) a logical volume lv_Scientific with ext4 FS and made its mount point (/) and used the MBR /boot which overwrote the Fedora /boot (completely OK and was as expected) i restarted after installation i got SL log in and as per the directions of the thread i copied the boot stanza from grub.conf of fedora 15 (which i already had copied and pasted into a text file and copied it from there)and pasted it into grub.conf of SL you may ask why did i choose same physical LVM too save swap space ... if i had made another physical LVM i had to make another swap ( i like LVM ... its cool)
completely unexpected happened Fedora now boots but not SL when grub starts i get this error 27 unrecognised commad and when i press <enter> i get grub menu with SL and fedora when i press on Fedora it works well i get my fedora login and i did login .. everything works fine but when i press SL it goes to the previous black screen grub error 27
[Code]...
View 14 Replies
View Related
May 3, 2010
My Server runs "fine", then I type init 6 for rebooting or some cron job initiates Init 6 and my system stops in grub at: GRUB loading stage1.5. Error 18 After another Ctrl+Alt+Del the system boots as if anything happened. this is why I doubt that it's an issue of too big HDD or BIOS.
View 2 Replies
View Related
Feb 4, 2010
I tried to install Open Office following a guide in OpenOffice.org but after several attempts debian refused to boot properly. I decided to re-install Debian 5.0. When we came to the installation of the boot loader GRUB refused to be installed. I stopped the installation expecting to go back to the beginning. But now it tries to boot saying:Grub loading stage 1.5.
Grub loading, please wait...
Error 15
This is an old Toshiba 3110 with Windows 98SE installed which I have successfully customized and do not want to loose. What can I do to get back into W98SE and then re-install Debian properly?
View 14 Replies
View Related
Jan 4, 2011
Ubuntu 10.10 doesn't boot at all. The liveCD only boots once every like 30 attempts, installing from liveCD froze, but the Alternate CD worked and installed ubuntu. Now when I try to boot into it using GRUB, it freezes at the beginning of the boot process.With normal boot it freezes at line: Starting AppArmor profiles Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox.With recovery mode it freezes even before showing me anything
A little kinda like the liveCD, if I try like 30 times, it might manage to boot once in normal mode.That line keeps on repeating, the the xxx.xxx integer changes each time, and this goes on forever.I tried removing my floppy drive, but it didn't help.I tried to boot with fd0=noprobeThe one time it booted, when I restarted, it froze while trying to restart.
View 9 Replies
View Related
Jun 30, 2010
A friend of mine has asked me to install Ubuntu for a long time. Today I set up his partitions with Lucid LiveCD and GParted.
However, the LiveCd throws an error that makes me hesitant to continue.
If I boot a LiveCD on my computer I get a question meaning "run Live or install?"
This question does not appear on my friends computer. The first thing you see (about 2 min after boot) is an alertpanel saying something like "The installer encountered an unrecoverable error. We will now set up a desktop environment so you can investigate the problem." After that the normal Lucid (Live) desktop appears and functions well, as far as I can understand.
Sorry for not being able to give more data about my friends system. It is a stationary computer about 2 yrs old, running XP. I can't really make investigations on his system either. I had hoped to go there next time and just install Lucid.
Maybe one should try the alternate installer, but my friend just got used to the LiveCD and I would therefore like to use the LiveCD.
I don't understand why it seems to start installation by itself.
Most of all. I wonder if it is a good idea to run the installation from the desktop icon? Maybe it will encounter the same error that the LiveCd seems to encounter at startup?
View 3 Replies
View Related
Feb 21, 2010
I been running both OS's for a few months now with no major problems besides wireless internet issues. Today, however, as I go to boot my laptop up, the Dell logo loads with the F2 and F12 boot and setup options which both work. Directly after that though I get the message "GRUB loading. Symbol '?' not found. Aborted. Press any key to Exit." then it repeats when I push a key, and then it tells me to press F1 to retry, F2 to go to setup, or F5 to run diagnostics. It passes all the tests in diagnostics. I've tried booting off of the ubuntu cd I used to load it initially with no luck. So I'm stuck at either that error message or in setup but I can't go any further, and it does not change anything when I tried to boot from the cd.
View 8 Replies
View Related
