Debian :: GRUB Refused To Be Installed / Grub Loader Error 15
Feb 4, 2010
I tried to install Open Office following a guide in OpenOffice.org but after several attempts debian refused to boot properly. I decided to re-install Debian 5.0. When we came to the installation of the boot loader GRUB refused to be installed. I stopped the installation expecting to go back to the beginning. But now it tries to boot saying:Grub loading stage 1.5.
Grub loading, please wait...
Error 15
This is an old Toshiba 3110 with Windows 98SE installed which I have successfully customized and do not want to loose. What can I do to get back into W98SE and then re-install Debian properly?
View 14 Replies
ADVERTISEMENT
Sep 21, 2010
I was installing sqeeze i386 on my laptop VOSTRO 1400 and got this the 'grub-pc' package failed to install into /target/. without the GRUB boot loader, the installed system will not boot.
View 3 Replies
View Related
Nov 16, 2010
I have a laptop with windows vista installed on the internal hardrive.Last March I installed wanted to start to use linux so I brought a separate external hardrive partitioned it to enable media storage on one section and installed ubuntu on the other half. It works fine and so does the windows vista on my internal hardrive, however I have to have the hardrive plugged in to boot.Until now this hasnt bothered me, however I've recently started to take my laptop into university and cannot switch it off unless I have the external hardrive with me as I cannot switch it on without it.With it plugged in it loads up GRUB and then gives me the option to load either Ubuntu or windows vista, however if it is not plugged in when I power up it says GRUB loader failed.It also occured to me that if for some reason my external hardrive fails in the future I wont be able to use my laptop anymore.Has the installation of ubuntu (and GRUB) altered the MBR?
Is there some way I can edit the settings so that I can load windows vista without the hardrive plugged in, and then if it is plugged in I get the choice which one to load?
View 6 Replies
View Related
Sep 2, 2009
A failed upgrade, from disk images, of Fedora 10 to 11 resulted in no GRUB bootloader main menu appearing on bootup (no WIN, no LINUX choices from which to boot). I am booted directly into the GRUB command shell...so, no WIN, no LINUX, nothing. And my understanding of GRUB shell commands is very low.I have 2 hard disks, WIN on the first, LINUX on the second. I believe GRUB Bootloader is on the first disk.Sadly, I have no external install media.An old grub.conf hardcopy indicates that root =/dev/sdb2, root (hd1,0), kernel /vmlinuz....olderversion...(relative to /boot),initrd /initrd...olderversion... (relative to boot). and WINDOWS on (hd0,1), with chainloader +1
I need to somehow get past this grub shell, and re-install/re-instate the grub bootloader, so it can boot normally.What grub command(s) must I use? I've played around with the commands, but with no success.I worry that if I can't resolve this, the whole machine may be useless.
View 9 Replies
View Related
May 18, 2010
PC: Dell Precision T7400.O/S: Windows XP SP3 64-bit & Scientific Linux 5.3 64-bit
The above PC has 2 HDDs installed one has XP and the other Scientific Linux.
Problem: XP needed to be re-installed, i've done this now but now the GRUB Boot loader doesnt load - So just boots straight into XP.
Qustion: Is there anywhere to fix the GRUB? Without wiping the 2nd HDD and re-installing Linux!
Let me know if you need any more info
View 11 Replies
View Related
Jun 29, 2010
I have a Windows 7 OS installed as my main OS, it installed on its own HDD with 3 other data storage drives.
On my 5th drive I installed a copy of OpenSUSE 11.02 to see if I like it. I have decided I don't wish to keep it so I reformatted the drive while in Win7. Of course on restart I got the Grub 1.5 Error 22. All my HDD's are seperate and there are no partitions.
I have had to reinstall OpenSUSE just to get my PC to boot.
All I want to is remove OpenSUSE from my computer without losing my Win 7 install.
My Win 7 install disc fails to recognise my Win 7 so I can not get the recovery command prompt/repair options.
Can someone explain in say 5 simple steps to get back my original MBR so I can boot straight to Windows as I can't seem to find a guide that actually explains what to do. Either by doing it in OpenSUSE 11.02 or Windows 7 Ultimate 64-bit.
View 9 Replies
View Related
Jan 10, 2010
I have a dual boot Vista/ Kubuntu and my vista SP2 has made both my vista and kubuntu unable to boot completely. I've been through many steps to recover vista but no restore point works and such so I am going to use my Toshiba recovery partition to reinstall but what I'm wondering is if after I do that will the grub loader be affected and give me the error 22? The two are on separate partitions and I've been meaning to get rid of Kubuntu from my laptop since I have it on my pc
View 1 Replies
View Related
Jul 15, 2010
I had Fedora 12 and windwos 7 installed,today i reinstalled windows, and when i restart i dont get anymore the boot menu to choose between linux and windwos and i tried to reinstalled fedora but i am getting this error Grub Loader error 17,what can i do to solve this problem,i am new to linux
View 4 Replies
View Related
Jun 19, 2011
I use Ubuntu on his edition 8.10 and have always been very pleased, until 11:04 last version. Actually used a dual boot for constant use of certain programs that only work on windows. By installing the latest version, everything is as before except that I can not see the initial grub, show me out of range. My boot loader resolution is 640x480 and still I can not see the grub at startup.
View 1 Replies
View Related
May 23, 2010
When I try and boot my Debian computer I get the messages: Grub Loading stage1.5. Grub loading, please wait... Error 15 Is there any way of recovering from this - or is it simply a fresh install? I was attempting an upgrade from Lenny to Squeeze and despite a few hurdles it looked like it was all happening. Got the new kernel loading, and the new grub. It looked as though grub2 was working so I ran the grub-remove-legacy-support command (something like that) and now my computer won't boot grub or Linux.
I'm assuming the MBR on my harddrive is lost, however I don't know what state the partition is in. I'm guessing that maybe this has been lost as well. I tried a few tools from the Ultimate Boot CD but nothing here was able to re-install my grub or boot from any partition or even mount my file-system. I'm fearing the worst but would like it confirmed before I blow it all away with a new install.
View 8 Replies
View Related
Oct 12, 2010
I am unable to get a knoppix poor mans install to boot using grub and opensuse 11.3. I have tried the same method on another box, same opensuse 11.3 and it boots fine. However, no matter what partition I put the knoppix files in on the problem box, it is the same error. I also have several opensuse kernels listed in the grub menu that were added when the kernel was updated, so the knoppix grub entry is off the screen. I have to down arrow to list the knoppix entry. I read that with this kind of error using ubunto as the host system, that running update-grub will force grub to look for bootable kernels and add it to the menu of boot choices. Does the same fix apply to opensuse 11.3? I have two versions of puppy linux working on this box as a poor mans install, so I am at a loss why it will not see the knoppix kernel. Can it be a problem of too many kernels listed in the menu.lst file? This box is a live update from opensuse 11.0.
View 13 Replies
View Related
Aug 26, 2015
I am thinking about maybe trying "LILO" [URL] ....
For my boot loader, from what I have read it sounds even more tempting.
I am totally sick of GRUB, even though it is what seems to be the most popular,and is what normally is used as the "default" when any linux system is installed, that is what the install ISO's use, but anyway, that is another topic, over the years, "grub failing", has been a problem for me , many times.
I saw this (From LILO to GRUB Howto).
View 5 Replies
View Related
Dec 18, 2010
I wanted to check what version of GRUB I have installed. I went to terminal and typed grub --versionI got this message back: The program 'grub' is currently not installed. You can install it by typing: sudo apt-get install grub
I am running Ubuntu 10.10 alongside windows xp pro. When I turn my pc on I have the option to boot to ubuntu or xp and at the top of the window it says that the version of grub running is "GNU GRUB Version 1.98+20100804-5Ubuntu-3" how I shold go about installing GRUB 2 or just leave it as is.
View 2 Replies
View Related
Mar 13, 2011
So here is my situation..i was using win 7 and ubuntu 10.10 in my dell studio 1555. and i wanted to try out debian so i installed debian in my pendrive. so the grub was modified. when the computer starts it shows debian,ubuntu and win7 no problem.. but if i remove the pendrive, nothing comes up. it shows grub rescue>..
so now i cant start up unless i plug in the pendrive. what to do now to solve this problem?? i want to restore my grub to the previos state.
View 2 Replies
View Related
Apr 3, 2010
I've had to give up trying to install linux. It just won't work on my machine, a Presario 6370us that has been upgraded over the years such that it is not compatible with linux, apparently. (You can read my travails elsewhere on this board; thanks very much to all who tried to help.)
Now, how do I remove the GRUB boot loader from my system? I need the system to boot directly to Windows XP.
I can't start linux in any way, shape, or form, so I need to either edit GRUB inside the GRUB environment itself, or to do so from Windows.
Ideally, I'd like to remove GRUB entirely. Failing that, I'd like to edit the GRUB config file so that only Windows is an option. Failing that, I need to make Windows the default OS.
View 3 Replies
View Related
Mar 11, 2015
Background: I am dual booting Debian and Window 7. Wanted to make windows-loader default and hide grub if possible. Google search took me here: [URL].... (third answer, about editing grub)
Make Windows (ANY variant) the default Grub2 menu option.
Description: This sets Windows as the default boot option, and (with NO user action) the PC will auto-launch Windows on startup.
STEPS:
A. sudo update-grub #List your current menu items
B. Edit setup file
sudo gedit /etc/default/grub
GRUB_DEFAULT=”Windows 7 (loader) on /dev/sda1″ #Set the boot default to your Windows boot partition
[WARNING: Just setting 'GRUB_DEFAULT=n', will NOT work after kernel updates, etc.
Save the file and close.]
sudo update-grub
Question: I must have done something wrong, for update-grub (as root) now gives this: "/usr/sbin/grub-mkconfig: 6: /etc/default/grub: 2: not found"
What should I do now to make grub as it was in the beginning?
[By the way, it's been very difficult to get Debian related pages...]
View 7 Replies
View Related
Feb 13, 2010
I used proprietary software (acronis trueimage) to clone an Opensuse 11.1 machine, onto another machine with somewhat distinct hardware (different motherboard, less memory). I expected to have to change entries in /boot/grub/menu.lst, /etc/fstab, etc. I was told a good way to do this was to use the Opensuse DVD's "repair installed system" feature.
When I ran the repair, I was informed that "bootloader configuration file contains errors". I attempted to re-install the bootloader, but received this unhelpful error: "An error occurred during boot loader installation. Retry boot loader configuration?". When I boot the system, I just see the text "GRUB ", followed by a flashing underscore character.
View 4 Replies
View Related
Feb 1, 2011
How to change boot loader from Grub to syslinux on running Lenny without damage the system?
View 1 Replies
View Related
May 27, 2009
00:12.0 VGA compatible controller: nVidia Corporation GeForce 7150M (rev a2)Linux rpmL 2.6.27.24-170.2.68.fc10.86_64 #1 SMP Wed May 20 22:47:23 EDT 2009 x86_64 x86_64 x86_64 GNU/Linuxere my predicamenti got a HP pavilion laptop running that Nvidia graphics card, on that build. So it was a fresh FC10 install, but it would hang up, and only load if i hit the keypad/mouse, which it still does. Eventually it gets to the shell login screen. root login and i then did a yum update, which got me to the current build. that didnt work. NO x window still.
tried startx again, got me an error. found something that said add "vga=ask" to the grub loader, which still loads into shell, but when i do startx, it made me a xorg.conf.new, which i copied into /etc/X11 rebooted and tried again. still have to move the mouse or keypad for the load to start (no idea y) but it loads to shell, and startx works.
View 2 Replies
View Related
Jul 8, 2011
I am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
View 9 Replies
View Related
Nov 23, 2010
I have a dual boot system with ubuntu 9.10 x64 and Windows 7. Everything has been working fine for a a long time but yesterday I tried to delete an unused partition through the Disk Utility in ubuntu (System->Adminstration->Disk Utility) and everything was messed up. I used to get the "Grub error: Unknown filesystem". I managed to create an ubuntu bootable usb and followed some tutorials for fixing grub but all i managed to do is to get another error: "Grub error: No such disc". After some experimentation i got
"Grub stage 1.5" which gave me a grub> command prompt./dev/sda is the drive containing Windows and Ubuntu.
Code:
[ Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 0.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #6 for /boot/grub/stage2 and /boot/grub/menu.lst.
[code].....
View 5 Replies
View Related
Jul 3, 2011
I've been serching the forum for hours and every thread related to "GRUB error: no such partition" that i've read relates to fixing the issue for users with windows OS also installed or trying to get windows to boot.
How it happened: I edited partitions and now I get GRUB error: no such partition. I ONLY have Linux installed.
I was able to boot the OS by typing:
Code:
set partition=(hd0,1)/boot/grub
set root=(hd0,1)
insmod normal
normal
[Code].....
View 6 Replies
View Related
Apr 7, 2010
after doing an upgrade to 10.4 and updating grub I get this message. how do I address this
[Code]...
View 2 Replies
View Related
Dec 16, 2010
This is the third time I try unsuccessfully to install Debian as a second OS on a hard drive. When it gets to the end of the installation process the installer asks whether I want to go ahead with the Grub Boot Loader, I choose yes. The end result is however that I can't boot that partition within the hard drive -- i.e., Debian. Can someone tell me what is going on? Should I not use the Grub Boot Loader when I have more than one operating system on a machine? Should I not install Grub on the Master Boot Record (MBR)?
View 3 Replies
View Related
Mar 27, 2011
I'm trying to install Debian 6.01 on my PC. I have only 1 hdd and it has 3 partitions. On first there is windows 7 and on second ubuntu 10.10 and GRUB is installed to MBR and I can load both systems with no problems.As PC has no optical drive I was trying to install debian using USB stick but had no success. I was ready to give up when I've discovered that there is a W32 installer that I can run under Win 7. So I downloaded it and executed, it starts and download certain files and then it asks for reboot.
After reboot I can still chose between Win 7 and Ubuntu. If I chose win 7 I'm given a choice to run Windows or to continue setup for debian. Very well installer starts and I can chose all the classic stuff between languages etc. Then I come to a point where I need to choose partitions, ok as I have free 30 Gb partition i choose it for debian with settings:
Format in Ext4
Mount point: /
I already have a swap part that I can use. Done that I can start with selection of packages which goes fine and installs everything directly from debian mirrosrs. After that I choose GRUB to be installed into MBR and it goes fine. Some final steps and reboot.
After reboot GRUB offers me again Ubuntu or Win 7. So I can boot either Ubuntu or win 7 which gives me the same choice from before, Windoes or continue Debian setup. I tried doing the setup again with some repair options that it offers but still nothing happens.
View 5 Replies
View Related
Mar 1, 2015
I have an hp pavilion 15-b106ed with UEFI. I disabled secure boot and installed debian jessie form the CD1 iso (RC1 installer) burned to an USB key. Installation went smoothly, but after rebooting I get grub's terminal-like screen saying:
"GNU GRUB version 2.02 beta2-9ubuntu1. Minimal BASH-like line editing is supported... etc"
The problem is that as soon as I turn on the computer that grub screen shows up and I can't boot from USB anymore nor
access the BIOS settings, no matter how fast I press F9, F10 and such. I guess I have to tell him to boot from the USB using the grub terminal...
View 9 Replies
View Related
Jul 31, 2011
is it ever possible to do dual booting with grub(legacy) ever at all!. it is possible provided i take some pain, here is the link of that post [URL] i was coward and weak i didn't try that out then. but i did try it out. now so if u haven't seen the post .... I've installed Fedora 15 desktop(Gnome) with physical Logical volume called vg_fedora lv_root(ext4) ,lv_swap and lv_home(ext4), with 500MB /boot partition and had about 200GB free hard disk space ... so i wanted to install Scientific Linux 6.1 (because our school uses RHEL 6.1)
so, while running the installer I made (added) a logical volume lv_Scientific with ext4 FS and made its mount point (/) and used the MBR /boot which overwrote the Fedora /boot (completely OK and was as expected) i restarted after installation i got SL log in and as per the directions of the thread i copied the boot stanza from grub.conf of fedora 15 (which i already had copied and pasted into a text file and copied it from there)and pasted it into grub.conf of SL you may ask why did i choose same physical LVM too save swap space ... if i had made another physical LVM i had to make another swap ( i like LVM ... its cool)
completely unexpected happened Fedora now boots but not SL when grub starts i get this error 27 unrecognised commad and when i press <enter> i get grub menu with SL and fedora when i press on Fedora it works well i get my fedora login and i did login .. everything works fine but when i press SL it goes to the previous black screen grub error 27
[Code]...
View 14 Replies
View Related
Jan 31, 2010
I've trawled the internet but can't seem to find the exact same issue, so I've made a new thread. So, I installed Ubuntu onto a 160gb drive. I have other drives in the system, but I disconnected them so that the system drive would be sda. Ubuntu installed perfectly with no issues whatsoever. I connected the other drives in the system, and again it booted up perfectly (although I can't remember whether the 160gb drive remained as sda or became sdd). Then I attached some extra drives temporarily to do some data shuffling.
This moved my system drive to become sdf. My computer booted fine multiple times like this, but when I was finished with the drives I rebooted and suddenly everything broke. For some reason my ubuntu installation showed up in the GRUB twice, and neither of them booted. So, I popped in the Live CD (which I'm using to type this post), and decided to update the grub. I chrooted into my system drive and ran update-grub, but it simply returned something like this:
[Code]....
View 7 Replies
View Related
May 3, 2010
My Server runs "fine", then I type init 6 for rebooting or some cron job initiates Init 6 and my system stops in grub at: GRUB loading stage1.5. Error 18 After another Ctrl+Alt+Del the system boots as if anything happened. this is why I doubt that it's an issue of too big HDD or BIOS.
View 2 Replies
View Related
May 13, 2011
Short story: upgraded to Natty, slowed graphics, re-installed Lucid, got Error: file not found and grub rescue prompt
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
View 1 Replies
View Related
