I was thinking of trying to install Window XP in a dual boot fashion but with the purpose of trying to configure wine to use it as it base instead of its normal setup. Only thing is Ubuntu is the sole controller of my laptop here atm and as you know installing XP will remove grub as boot controller. And while I know about SuperGrub I was wondering how, if possible,do I re-install grub from Karmic's LiveCD?
View 2 RepliesI installed Windows after installing Ubuntu. But Ubuntu is still intact in its partition.
I'm trying to run the Ubuntu LiveCD to recover grub, but the LiveCD no longer works. It stops the boot process and does not load completely.
I can not run Ubuntu in live mode to recover grub.
Is there any way to recover the grub/grub2 without the LiveCD?
liveCD hangs on the ubuntu splash screen. this is the second time grub has hosed this system (last time was 9.10 upgrade).
View 9 Replies View RelatedI had Win XP on my T61. I installed Fedora 11 from Gnome LiveCD. Now I cant even see GRUB. The laptop boots directly into Win XP. I had the partitions like this:
/dev/sda1 - Win XP - NTFS - 75 GB
/dev/sda2 - Win Recovery - NTFS - 5 GB
/dev/sda3 - /boot - ext3 - 1 GB
/dev/sda4 - Logical extended partition
/dev/sda5 - / - ext4 - 10 GB
/dev/sda6 - swap - 3 GB
Installed GRUB on the MBR (/dev/sda, and not on any partition). Once I completed installing Fedora 11 from the LiveCD and rebooted, the laptop directly boots into Win XP. No sign of Fedora there. How do I get to install GRUB now?
I installed Fedoa 13 from a Gnome Live cd which I had to burn on a DVD since I had no cd Available. I just saw that there is still the option to download the DVD image. Since my installation is quite buggy I'd like to know if installing from a DVD has better outcomes.
View 3 Replies View RelatedI've just installed Fedora (F13) for the first time, on a new HDD, to give myself a dual-boot system. So currently I have:
So, at the appropriate stage in the install menu, there is an option for where to install GRUB, and a drop-down to choose which drive is the primary BIOS boot drive.
However, in both cases, no other drive except my new sdc is visible. So, I can install GRUB to MBR of sdc, or to first sector of boot partition - but no option to put it to my primary boot drive MBR on sda.
Likewise, in the GRUB configuration page, if I go to Add another OS, the only option it gives me is my new Fedora install. It doesn't list the Vista OS on sda at all.
The result is that I can boot to either OS by changing the boot drive priority in BIOS.
I guess my question is this:
- is this expected behaviour from the installer, meaning that I'll need to configure GRUB manually somehow? (gulp ) or
- did I do something wrong in the install process? or
- is this some weird bug manifesting itself?
I have a Windows / Ubuntu dual boot system and I recently upgraded my system to 10.04 from the package manager. I ran into what seem to be not an unusual issue with the new version of GRUB2 being installed hosing up the MBR. When I try to boot now I get a message stating: the symbol 'grub_puts_' not found.
There are a few posts and solutions out there about the issue... but the most promising ones, using the Ubuntu 10.04 liveCD don't work for me. The GRUB changes don't seem to stick. It's almost like I'm doing all the grub command line work in a virtual system that gets wiped out as soon as I reboot.
For reference, here is one of the posts I've been working w/, some links in there seemed very promising, but again nothing seem to stick for me from the liveCD:[URL]..Should I be using some rescue disk of some sort? Or is there a way to boot directly to a command line from the Ubuntu CD menu?
So Im running windows, but I want to switch back to ubuntu. I have a spare hard drive for my laptop, so this is a basic one partition on one drive setup. The problem I'm having is the cd or dvd will not boot. I keep getting the grub error, rescue mode. I've read many of the other posts, but they are dual/triple boot, multiple drives, upgrades etc. I don't need any of that nonsense, just a simple explanation as to why the many copies of 10.10, and one of 10.4 give me the same error.
View 3 Replies View RelatedI've asked this in another forum, but I'm not sure I phrased it very well. I have a desktop and a "server" at the house. The "server" is sitting across the room, with no keyboard or mouse. If I were to boot the server from a LiveCD, could I then get in with SSH and kick off the setup remotely? I'm getting "Connection refused" when trying to ssh in, so I'm guessing that the service is probably not turned on.
I checked into Reconstructor, and I think that may be the way to go, if I can figure out what I need to do. I'm thinking all I need to do is install an SSH key and start the service, then I can get into it from my desktop and proceed with the install.
Is this possible to do? Or is there a better way? I know I could lug the keyboard, mouse and monitor over to the other machine to do it, but that would mean that I couldn't do anything on my desktop (since that's where the keyboard, etc. would come from).
I managed to mess up GNOME on my ubuntu laptop. Now, I can't connect to the internet because the network manager applet is removed. Is there anyway to reinstall gnome from the livecd of ubuntu? Also, I want to uninstall GNOME and install LXDE, is there anyway to do this without uninstalling any of the applications that are installed by default with gnome, such as openoffice.org or firefox?
View 8 Replies View RelatedI've got a dual boot set up with Windows on my first hard drive and Ubuntu Lucid on my second.Recently I had to Re-install Windows and it replaced GRUB on my master boot record.On a long shot I tried to boot into Ubuntu by going into my boot options from my BIOS and booting into my secondary drive but this just brought up a GRUB command line.So I booted into a Jaunty live cd (the Lucid live disk doesn't seem to like my graphics card) and in terminal I tried to run
Code:
sudo grub
root (hd0,0)
setup (hd0)
after running the final line I get the error: "Error 17: Cannot mount selected partition".I'm pretty certain that sda1 is my MBR so that would translate to (hd0,0) on GRUB right? here is my output of "fdisk -l";
Code:
Disk /dev/sda: 2000.3 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x1aae7bbb
[code]....
I have a system without a cd reader so i dd'd the livecd iso (I'm stuck with 7.10) to a partition. I can boot the system with grub4dos by loading the kernel and ramdisk. Is there a kernel parameter I can append so I can change the keymap like I was able to by pressing F3 in the cd boot menu?
View 2 Replies View RelatedThe computer I'm using is a Dell Vostro 1000. If you need any specific stats, let me know and I'll post them, but I don't have access to anything that will list them.
As of this afternoon, Grub will not longer boot. I don't know what prompted it; the only change I made was to the power management settings and installing IcedTea. It brings me to "BusyBox" after saying "No init found. Try passing init= bootarg." Then it brings me to some command prompt that doesn't respond to most bash commands I know, and it says "(initramfs)."
I had that problem two or three weeks ago after Fedora broke Grub, but I fixed it by using "grub-install" in an Ubuntu LiveCD. (No easy task to find what command I needed to use, though.)
But, now the LiveCD won't load. It hangs on the splash screen that just says "Ubuntu" with the dots underneath that indicate it's loading. This exact same disk (and I've reburned it, of course) worked fine when I had to clean up the mess that Fedora made. I tried switching to a terminal at the point where it hangs and there are no messages at all.
I already tried using acpi = off and burning the disk at the slowest speed (from two different computers).
I tried with the Mepis LiveCD, but the GUI just shows a blank screen. I can run commands using Alt+F2, and the cursor is visible, but that's it. I can switch to a terminal, but I can barely use grub-install at all as it is, and I can't figure out how to mount a drive through the command line.
An older version of a Sabayon Linux LiveCD works fine, but, unfortunately, doesn't do anything useful. I haven't tried Knoppix because it never worked on this computer.
If there are any other distros that I can use to run grub-install (preferably lightweight; I'm getting impatient downloading so many 700 mb iso files), I'm open to suggestion. Those are just the ones that I'm familiar with already.
In my CentOS Bible, written by Timothy and Christopher it refers to a one button that you can install CentOS with one button from the LiveCD, or from CentOS running from the CD and install to the hard drive? I pressed everything and nada, as most everything does not function it seems. What am I missing that may go along with preparing these Dell 2650's?
View 9 Replies View RelatedI had a dual boot with windows 10 and Ubuntu 14.04, and I just decided to move from Ubuntu to Debian, but I didn't unistall Ubuntu. I just deleted it's partitions (/, /home, swap) and used the new allocatable space. When I was doing the partitions I noticed that the installer didn't allow me to choose between logical and primary partitions (not sure if this is important).
When I continued with the installation process, in the GRUB section the installer detected two Windows Vista options and later I selected /dev/sda as the disk for the GRUB (MBR). When I tried to boot, a GRUB command line screen from ubuntu appeared, when I wrote exit a message appeared "Boot succesfull" and then it sent me to the Boot selection from my laptop.
From there I can choose to boot Windows 10 normally or select a disk partition that sends me to the Debian GRUB from where I can boot Debian normally, but the Windows entries that appear (Windows 8.1 and Windows 8 recovery mode) fail to boot. So when I boot the Debian GRUB appears.
I am trying to install 10.04 to an external HD (not flash). I ran the live CD, installed to it and all seemed to work fine, but I don't want to use GRUB. I ran 7 repair and did a bootrec /fixmbr and it's booting normal, but I can't boot to USB.I want it to boot normal, unless I hit F12 to boot to removable device. Not much of a Linux person, but I am trying to be.
View 7 Replies View RelatedI have 10.10 installed on my machine. I'm trying to install 10.4 on another partition. Install completes, but when I reboot, there's no entry in the grub menu for the 10.4 install. I tried adding an entry to 40_custom in /etc/grub.d, but it still doesn't show up. I'm pasting my 40_custom below.
#!/bin/sh
exec tail -n +3 $0
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry 'Ubuntu 10.4' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos10)'
search --no-floppy --fs-uuid --set be888928-a477-4b31-b478-13271009c032
linux/boot/vmlinuz-2.6.32-24-generic root=UUID=be888928-a477-4b31-b478-13271009c032 ro quiet splash
initrd/boot/initrd.img-2.6.32-24-generic
}
I have just bought a new HDD and installed it in my Ubuntu server. The problem is that when I try to boot, I only receive the message "Grub error 17" and at that point the computer freezes.
In my troubleshooting I found that without the new drive, the computer starts and the hard drives are listed in BIOS as follows:
1. DVD-rom (ide) - Master
2. 80gb disk (with OS installed) (ide) - Master
3. 1tb disk (sata) - Master
In the new setup the disks are listed like this:
1. DVD-rom (ide) - Master
2. 80gb disk (with OS installed) (ide) - Slave
3. 1tb disk (sata) - Master
4. 2tb disk (sata) - Master
May this different listing in BIOS lead to the Grub error?
I recently had to reinstall windows on another partition on my hard drive due to there not being any good way to run unrealed under ubuntu (believe me, I've tried everything) Is there a way to install grub from windows without using a liveCD or booting to a USB? I have downloaded WINGRUB and to be fair I have no clue how to use it.I no longer can access my Ubuntu partition.
View 1 Replies View RelatedI am having trouble installing HPLIP (all versions) onto my system. When I go to configure the source code, it goes into a loop checking for a BSD install. So, to get around this I want to try and install HPLIP onto the system via a livecd. How would I go about doing this?
View 5 Replies View RelatedI just installed Ubuntu 10.04 from the LiveCD--smooth install, OS looks great-elegant.Now, since I have to use dial-up, I need to install additional files from the LiveCD that aren't installed by default:
[LiveCD]:poolmainwwvdial wvdial_1.60.3_i386.deb
...and
[LiveCD]:poolmainwwvstreams [3 sw packages]
How do I get these files from the CD, and make them run on the Ubuntu installation? I've checked in the UI, and see various terms I don't yet understand. Do I extract the packages? Or do I open a pgm in Ubuntu, in which I specify the path to the files on the CD?
I'm going to use an external USRobotics 5637 USB modem that is supposed to work in Linux; just need to configure Ubuntu for this. I have the ISP DNS server numbers and modem is ready. I've seen online info, but I'm stuck at this very basic step.
I recently installed Ubuntu Studio on my PC, dual-booting it with Vista. Once the installation had finished, and I had rebooted, Grub showed the two Vista options:
Windows Vista (loader)
Windows Recovery Environment (loader)
When I load up "Windows Vista (loader)" it opens my Acer eRecovery Management, but when I load "Windows Recovery Environment (loader)" it opens what looks like a normal version of Vista. Is it possible that on installation, Grub accidentally swapped the two around, or have I probably mucked up my computer?
After install of Ubuntu 10.04 I cant boot WIN7 from the Grub menu.
root@asus:~# fdisk -l
Disk /dev/sda: 32.0 GB, 32017047552 bytes
255 heads, 63 sectors/track, 3892 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xcb5bd2b2
Device Boot Start End Blocks Id System
/dev/sda1 * 1 3890 31245312 7 HPFS/NTFS
/dev/sda2 3890 3892 16154 ef EFI (FAT-12/16/32)
Disk /dev/sdb: 31.9 GB, 31914983424 bytes
255 heads, 63 sectors/track, 3880 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0002ac5b
Device Boot Start End Blocks Id System
/dev/sdb1 1 3391 27230840+ c W95 FAT32 (LBA)
/dev/sdb2 3391 3881 3931137 5 Extended
/dev/sdb5 3391 3852 3701760 83 Linux
/dev/sdb6 3852 3881 228352 82 Linux swap / Solaris
I am currently installing the Ubuntu 10.04 Alternative, as I am having problem with video card. What I know is that I need to edit the Grub file in /etc/default/grub and add i915.modeset=1 for my video card. What I don't know is how to do that in the command line, what application should I use and how to save it? Also, if everything works well, I want to boot to gnome automatically. What I am looking for is a step by step instructions (as I can get lost).
View 8 Replies View RelatedGot Ubuntu 10.10 amd64 installed.. I've been using Fedora 13 64bit for some time now dual boot with WinXP.. Ubuntu installation to a free Hard drive went well till i rebooted, my Fedora installation was gone , and i thought Ubuntu is much installer friendly than fedora.
View 1 Replies View RelatedI have windows 7 installed on my copmuter and I ran the alternate disc cause the live disc didn't work for me. So installing was smmoth and I did everything right excpet for the grub part. It asked to be a master loader or something and I said yes. After restarting I see the grub menu but I only see two ubuntus(recovery mode) on the list and 2 test thingys ( memory test) So I go to the ubuntu tab and I get kubuntu ( as ecpected). Right now I am using kubuntu and it is fine but?
View 9 Replies View RelatedI have a raid 0 setup with 2 x 1TB drives. I have an ASUS P8P67 LE motherboard and am using Interl RST for the Raid setup. I'm utterly ignorant of raid and therefore forgive any mistakes... I already had windows 7 installed and was attempting to dual boot ubuntu.
I installed Ubuntu from CD. The raid was picked up properly as only one drive by ubuntu. So it picked up the windows MBR and the main windows partition. I resized the main partition and used the "install ubuntu and windows 7 side by side" option. Installation went fine but once I restarted the PC I was welcomed by a grub rescue screen with the message: "error: no such device e196.....". Edit: I used the Windows 7 disc to repair the windows bootloader so I can now boot into Windows 7.
Before doing so I used gparted on the live cd to check the partitions on the drives. The only ones present were the MBR and windows one. So ubuntu seemingly didn't install... Although GRUB did... I was advised by someone on the ubuntu IRC chat to avoid trying to reinstall ubuntu at that point just in case there was an error in the partitioning process. I've since checked the state of the partitions from within windows and there's the MBR partiton, the windows partiton AND the partition that I created for ubuntu... 965MB of the partition that I created is listed as used space as well...
I'm just slightly confused here, but... what the? Why does installing grub-doc remove BOTH grub-pc, and grub-common? So basically it seems like by installing grub-doc, I have uninstalled grub totally (yes, it is still there as the bootloader, but i have no way of updating it now!) from my system. What's the conflict between grub-doc and grub-pc, such that grub-pc has to be removed?
View 5 Replies View RelatedIf I install a totally different Linux distro on my existing Ubuntu 9.10 system, will it break GRUB 2? I was thinking of installing Debian Lenny, but have held off because I do not want to inadvertently wreck the boot arrangement.
I've previously installed Windows after installing Kubuntu, and had to reinstall GRUB as the bootloader as a result. It wasn't a big deal with the old GRUB, but I don't know if it's that easy with GRUB 2.
I am not sure what bootloader Debian Lenny uses. I've been looking but haven't found the answer yet. I guess if it also uses Grub 2, I wouldn't have to fix anything.
I want to try out Lenny because an app I want to use (Teamspeak 3) doesn't play nicely with Pulseaudio. Pulseaudio is integral to Ubuntu 9.10, but I have other options with Debian Lenny. I'd like to see whether the app works better there w/LXDE.
I guess I could also just make a virtual Lenny machine in Virtualbox, but I wouldn't get full use of my hardware, so I wouldn't be able to play Urban Terror (which is why I want to use Teamspeak 3).
I installed unbuntu 9.10 on a dual partition for alongside windows. Grub failed during installation and now I can not boot to windows or ubuntu. I can not repair with the windows cd, I can not do anything in Windows recovery no format, no fixboot, no chkdsk, no anything, it tells me there is no valid drive when I am in dir C:. In Ubuntu live CD I can see all the files are there on the local disk. What do I need to do to fix this
View 9 Replies View Related