I have an 10.10 Maverick Ubuntu, and I've tried to update it to Natty version, but when I try it says to I check my connection with Internet and then close the update app, but my connection is fine, I think this could be something related to the host, since when I try to use sudo or play Frets on Fire it says that they "couldn't resolve the host".
View 2 RepliesUpdate Manager is inviting me to update from my Maverick Meerkat to Natty. Is this a good idea?
View 7 Replies View RelatedI use Ubuntu 10.10 Maverick Meerkat.I've heard of a newer version:Ubuntu 11.04(AKA,the Natty Narwhal).My question is:shall I upgrade to Natty?Any recommendations? When was the Maverick Meerkat released?
View 2 Replies View RelatedI'm just wondering if there's a page out there that lists the improvements and other changes to Ubuntu from Maverick to Natty.
View 2 Replies View RelatedI browsed on internet to find how to upgrade to 11.04 and find the answer.Press Alt+F2 and enter the command update-manager -dAfter authentication, the manager showed the updates and at some point of time, I got the following error.
----
E: Encountered a section with no Package: header
E: Problem with MergeList
[code].....
this is on three separate laptops; an HP Pavilion 4120se, a Sony Vaio VGN-S5XP and a Dell Studio XPS1340. All are showing the same symptoms, though the first two are running 10.10 and the last is dual-boot Win7Pro and Natty 64-bit. All are UK models with a Region 2 restriction. The dual boot machine will run all legal movie DVDs perfectly under Windows 7 Professional. All three installations will run educational and similar DVDs. On all 3, Medibuntu repo is enabled, Ubuntu Restricted Extras are installed, as is libdvdcss2 and libdvdread4 (if those 2 can co-exist!). I'm using Movie Player and VLC.
I have tried UK retail commercial Region 2 movie DVDs, foreign region-free movie DVDs, Chinese pirate movie DVDs. None work. However, Licklibrary guitar instructional DVDs work fine - so the drives are OK! I've tried the oldest movie DVDs I have, and the same result. MP in Maverick tells me, "Could not read from resource" (VLC just does nothing!), and in Natty it says, "Could not read DVD. This may be because the DVD is encrypted and a DVD decryption library is not installed".
I have read as much as I can of the sticky above, and searched through every 'can't play DVDs' thread - hence the installation of all the above-mentioned software, codecs and libraries, all to no avail. Is it simply that the lack of commercial kick-backs from open-source software means Linux users will not be allowed to view movie content, or is there something fundamental I'm missing?
I upgraded from Maverick to the Natty beta a little while ago. It all worked fine for a couple of weeks. Then, this morning, I was unable to boot. I got to GRUB, picked the first option and it went to the Ubuntu 11.04 with the dots, then returned this:
Code:
fsck from util-linux-ng 2.17.2
/dev/sdb2: clean, 330122/2170880 files, 7302496/8683520 blocks
init: udevtrigger main process (367) terminated with status 1
init: udevtrigger post-stop process (372) terminated with status 1
init: udevmonitor main process (366) killed by TERM signal
[Code].....
I have a couple of 64bit Maverick installs from the minimal CD.They each have about 1100 packages installed. When I started to upgrade one to Natty with the Upgrade Manager, it told me it wanted to install 205 new packages (along with upgrading 877).205 new packages seems like a lot of growth in the minimal install.Why do I need those 205 packages?Then I looked at the minimal CD page where I saw that the minimal CD itself (which has lists of packages not the packages) grew from 15.6 to 22MB.So, did the minimal install just bloat up with Natty or what? Is there an even-more-minimal install?
View 3 Replies View Relatedhow do I connect to a PPTP VPN (router) using Ubuntu server (Maverick/Natty)?
View 3 Replies View Relatedalong with Aiptek, Hanwang, N-trig, Waltop, & WizardPen (Ace Cad, KYE Systems, UC-LOGIC) Tablets Last updated: July 24, 2011 Preliminaries
1) You must have X server 1.8 or up (Maverick has 1.9).
[Code]...
I upgraded my dedicated server using the do-release-upgrade command, and it seems to have installed many extra packages I do not require. This is a headless server in a datacentre, yet the upgrade caused me to install GUI packages I do not need. Is there a way to quickly remove all but the default server packages?
View 1 Replies View RelatedIs Ubuntu going to release a second version of Ubuntu 10.10 using Unity as well as keep the Maverick Meerkat version? I don't know about you, but I already hate the Unity version. It looks like the desktop at your ATM. This could be Ubuntu's Vista.
View 2 Replies View RelatedWhere would I find the very latest (daily build) of the desktop version of Maverick ?
View 1 Replies View RelatedWhat happens if you get an update for an older version kernel when you are using a new version?
View 3 Replies View RelatedIs there a version of synfigstudio that will work on natty? If so can I get a script to download and install it? If not, can someone suggest an alternative?
View 2 Replies View RelatedIs there a way to disable the "upgrade to natty" pop-up window on Maverick? I currently have no intentions on upgrading, and the pop-up is very annoying when I'm typing, and suddenly There It Is
View 2 Replies View RelatedI'm attempting to install a command-line version of Maverick, from the alternate CD. I'm using the 64-bit version. The installation has gone fine - however, I'm having troubles getting the wireless to work. I've installed wireless-tools by carting the *.deb archive over from another computer - this seemed to go fine, and iwconfig shows my wireless card as "wlan0". However, even after setting the essid and the WEP key I can't connect to the internet (tested this using apt-get). I know that this wireless card requires the "rtl8187se" module, which automatically loads with the desktop version of Maverick - however, it isn't working on the command-line. Running "sudo modprobe rtl8187se" pings back an error message saying that the module can't be found. Is there a way for me to manually install it or "find" it?
View 1 Replies View RelatedHave been using Lubuntu Natty (32-bit) happily for a few days now, even generated a remastered iso (urxvt, custom .bashrc, .bash_aliases, Chromium with AdBlock Plus, Tabs to the Front, Context Menu Search, Unified Openbox and GTK themes, aria2c, htop). One of the Peppermint OS developers put together a 64-bit version of Lubuntu Natty. Downloaded and installed it from USB (using USB Creator) today. Hangs pretty bad at LXDM login screen.
View 1 Replies View RelatedI currently have Ubuntu 10.10 Maverick netbook edition installed and I am using Unity. I understand there are updates to Unity since it was bundled with Ubuntu. When I do:
Code:
$ unity --version
I get:
Quote:
Unity 0.2.46
How do I update to a more recent version of Unity? Or do I have to wait until I upgrade to Natty?
I have Maverick on Macbook Pro 7,1. Today I installed updates and restarted. When I select Linux in rEFIt, it shows penguin for a while and then black screen with blinking cursor, no grub. What can I do?
View 5 Replies View RelatedUpdate manager has stopped working under Maverick. Is it best to format disk and reload the system anew or does anybody know of a fix?
View 2 Replies View RelatedHow do I update Empathy on Natty to it's latest version? I've been having trouble to figure it out.. The version that comes on Ubuntu 11.04 doesn't even have an icon that tells me which contacts are on mobile.
View 8 Replies View RelatedI'm dual booting Windows 7 and Ubuntu. I wanna upgrade Ubuntu 10.10 to Ubuntu 11.04. I boot from the 11.04live cd, I select "install", but there's NO upgrade option.. How do I upgrade??
View 8 Replies View RelatedMy problem is same as written above Issue:: Unable to Machine configuration: Toshiba L640-X4310OS: Release 10.10 (Maverick) kernel linux 2.6.35-23-generic gnome 2.32
Error log:
$sudo apt-get update
installArchives() failed: perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
[code].....
I have a fedora 11 with kernel package: kernel-PAE-2.6.29.6-217.2.3.fc11.i686
I would like to install the devel package for this kernel version, but I can't find it, because in the fedora repo there is only the original kernel (2.6.29.4....) and in the updates repo there is only the newest kernel package (2.6.30....)
Where can I find the packages which are between the fedora and update repos' versions?
I recently updated from ubntu 10.10 to 11.04. (64bit). Now my Kdenlive stopped working.
Terminals says:
lars@ubuntu:~$ kdenlive
Qt: Session management error: None of the authentication protocols specified are supported
kdenlive: malloc.c:3096: sYSMALLOc: Assertion `(old_top == (((mbinptr) (((char *) &((av)->bins[((1) - 1) * 2])) - __builtin_offsetof (struct malloc_chunk, fd)))) && old_size == 0) || ((unsigned long) (old_size) >= (unsigned long)((((__builtin_offsetof (struct malloc_chunk, fd_nextsize))+((2 * (sizeof(size_t))) - 1)) & ~((2 * (sizeof(size_t))) - 1))) && ((old_top)->size & 0x1) && ((unsigned long)old_end & pagemask) == 0)' failed.
KCrash: Application 'kdenlive' crashing...
KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi from kdeinit
sock_file=/home/lars/.kde/socket-ubuntu/kdeinit4__0
Warning: connect() failed: : No such file or directory
KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
Alarm clock
After updating to natty I cannot compile any Gtk+ code, no matter what I do I get linker errors. This is not a problem with the way I'm building it, I'm familiar with the correct usage of pkg-config.
Even this code will fail to link:
Code:
#include <gtk/gtk.h>
int main(int argc, char** argv) {
gkt_init(&argc, &argv);
gtk_main(); }
(Compiled with the standard commands to compile Gtk+ stuff)
I always get the following output:
Code:
/usr/lib/libgtk-x11-2.0.so: undefined reference to `g_source_get_time'
/usr/lib/libgtk-x11-2.0.so: undefined reference to `g_get_monotonic_time'
/usr/lib/libgdk_pixbuf-2.0.so: undefined reference to `g_simple_async_result_take_error'
/usr/lib/libgdk-x11-2.0.so: undefined reference to `g_slist_free_full'
I accepted the latest Natty update about which I was notified a couple of days ago (I don't remember exactly). I don't remember a new kernel being pushed out, but for the record I'm on 2.6.38-8-generic right now. I'm trying to interact with a USB compact flash reader and I'm getting ridiculously low throughput (less than 1 MB per second). Before this latest upgrade, I don't remember this being a problem.
Better yet, does anybody know what might be wrong and what I might be able to do to fix this?
Since I have updated last night from maverick to the latest beta of natty narwal, I'm having a lot of trouble getting Nautilus (desktop included) to work.
It seems to crash since the very start as when I turn off the computer, the message of "force exit" appears.
I have to manage a publicly accessible computer, and people know the password and are willing to click just anything, that pops up and has a "yes"/"ok"/"i agree" button on it, just to make the message disappear. (yes, I hate their ignorance ...) As long as they can use the net, that is all they care about...
My question is, can I still get updates for Maverick without being prompted for upgrade to Natty? Also I would like to remove the button from Update Manager. Is there a simple way to do that?