along with Aiptek, Hanwang, N-trig, Waltop, & WizardPen (Ace Cad, KYE Systems, UC-LOGIC) Tablets Last updated: July 24, 2011 Preliminaries
1) You must have X server 1.8 or up (Maverick has 1.9).
[Code]...
I have recently purchased a Wacom Bamboo Pen & Touch tablet and have got it working with Ubuntu 9.10 (Karmic) by following this post: [URL].
I am now trying to trap the actual data coming from the bamboo as I write with the pen and found some threads suggesting that if I do an xxd one of /dev/ttyS[0-4] I should be able to see output. However when I do a "sudo xxd /dev/ttyS0" the xxd command finishes straight away.
If I run the command "xxd /dev/input/mouse1" I can the data coming from the mouse movement so I am expecting to be able to see the same sort of thing coming from the wacom bamboo pen. Both the bamboo and the mouse are USB connected.
Does anyone know if the stream of data coming form the wacom bamboo should go to /dev/ttyS[0-4] or should I be looking elsewhere?
i have a laptop and i plunged an external monitor into it. I want to obtain a virtual desktop[ I will privede more debugging info below
video card
01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M]
Driver:open source radeon driver distribution kubuntu 10.04
I tried this:
xrandr --output LVDS --mode 1280x800 --pos 0x0 --output VGA-0 --mode 1920x1080 --right-of LVDS --pos 1280x0
it resulted this error 1
xrandr: screen cannot be larger than 1920x1920 (desired size 3200x1080)
Googling about this error i found a old post,it could be outfated that sugested editing xorg.conf. I created a xorg.conf using "Xorg -configure" and i modified the screen section to this:
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
[Code].....
My Wacom tablet's cursor skips around the screen and makes it impossible to use. Is there a way to use wacom-tools (wacomcpl) to fix this? Or, is there any known way to fix this?
View 4 Replies View RelatedI have a wacom pen and touch tablet and am running 10.4 what is the easy way to install and get it working?
View 9 Replies View RelatedI am attempting to set up a wacom bamboo tablet with ubuntu 9.04 (latest version for netbooks).
I have followed howto advice however i have failed to produce the wacom.ko from the downloaded driver. The driver from the Linux wacom project is "linuxwacom-0.8.4-4.tar.bz2"
There appears to be a problem when i use ./configure --enable-wacom thereafter make and install fail to produce the required files. Below is the message when configuring the file.
*** WARNING:
*** Unable to guess kernel source directory
*** Looked at /lib/modules/2.6.30.5-ep0/source, /lib/modules/2.6.30.5-ep0/build,
*** /usr/src/linux, /usr/src/linux-2.6.30.5-ep0, and
[ode]....
I have a wacom graphire3 tablet and two monitors. The tablet is workin properly with out of the box drivers.
As well as the dual monitors configured as twinview through Nvidia X server. But the tablet is mapped for the two screens, then I searched the forums for a proper configuration and it it tells me to edit the xorg.conf file for twinview horizontal but, it don't make any difference. I've "sudo gedit" edited the xorg.conf and nothing happens. Nothing, the tablet is working properly, the system is stable and it's still mapped for two screens.
What can I do? The xorg.conf also isn't listing all my hardware, I can't see the confs for my mouse. I'm on karmic koala.
as a kind of luxory item I am thinking of adding a bamboo to my PC. Before putting action behind this, I wonder how much of a hazzle this brings about. Has anybody of you experience with 11.4 in this field? If a hazzle: Can anybody be bothered to compile the driver and provide it as a 1-click on the build service - or even in the official repositories? Would there be full functionality actually after all? BTW, I am aware of the wacom SF-site.
View 9 Replies View RelatedIt's a CTH-460. I downloaded the driver from the linuxwacom project and followed the instructions.
It doesn't work yet but lights turn on, and the pointer follow the displacement (no writing is possible). I have tested also in Windows Machine and it works perfectly well.
My machine is an ASUS VX2S and the distro is Ubuntu 10.04.
I was messing with xorg.conf trying to get my wacom tablet to work. I restarted and it brings be everytime to a terminal. I can log in but that is about it. When I type startx it says xorg.conf is messed up bad. I already tried:
[Code]...
I have recently bought a Wacom Bamboo Pen Tablet, and just as recently installed Fedora 12 KDE for its supposed "excellent tablet support".
Well, I have yet to see any of that. Unless the fact that I'm using KDE affects this (and I'm staying KDE, no more GNOME for me!), I see no reason why my tablet should not work. It was working fine in Windows Vista Home Premium 32-bit (though the last time I started up in Windows it said it didn't recognize the device).
None of the applications that I've heard implemented in Fedora to support tablets were installed, but then again they're all probably GNOME apps, am I right? Still, my tablet should at least act as a mouse? I checked KPackageManager, and it said that the latest linuxwacom driver was installed. So why isn't anything working?
It seems as if everything - all this talk about tablet support in F12 - is just for GNOME. About the only thing working with my tablet as I type this is the status light, which indicates it being recognized as a USB device, and it flashes like it should when I tap the surface with the pen, but it seems as if there's nothing to receive the input. I even installed the latest GIMP, and when I checked Input Devices, nothing relating to the tablet was even there! At least on Windows it showed the Pen and the non-existent eraser, though neither worked properly, but it seems as if Fedora 12 doesn't even know it's there!
I shouldn't have to change anything in xorg.conf, because I thought that linuxwacom did it for you?
I'm looking for a decent program to take notes on my Lenovo tablet laptop. What's your favorite?
View 1 Replies View RelatedI decided to write here because I was wondering if there are any Wacom Bamboo (MTE-450) tablet users who experience any resume problems with their tablets on 11.3. I experience this issue on 11.2 - tablet was not working after resume from suspending to RAM - I had to replug it in order to make it work. Now when I upgraded to 11.3, the issue was still there.
Finally, I was able to "workaround" the issue by doing the following (found on some Ubuntu groups):
Code:
echo 'SUSPEND_MODULES="wacom"' | sudo tee /etc/pm/config.d/50wacom
I am wondering if that happens to anyone else and if it still the case for a freshly installed 11.3.
I've just installed Fedora 13 and I have a question. How do I tune my tablet? I've tried to set threshold and aspect in xorg.conf just like in Fedora 11, but it doesn't work in the current release.
Here's a part of my xorg.conf:
I also tried 'xsetwacom' command, but I get errors.
There has been a lot of effort invested in getting external USB connected anything to work well during the connect then disconnect processing. It seems that there are troubles with OEM serial digitizers like those built-in for a tablet-PC. The built-in OEM devices do not have the same sort of connection events to trigger device creation and configuration.
Does anyone know how to make all of the find-hardware then create configuration processing visible? While I find several postings that describe "... edit xorg.conf ..." but then those edits don't want to work with the recent evolution in Xorg and X11-server configuration that deprecates (abandons?) xorg.conf. Does anyone understand what is going on with Xorg and X11-config to help me get my tablet working? Has anyone used an external USB tablet, then adapted those configuration details to get an OEM tablet working? I know that every tablet is different, but if the external device connect-creates-config process works best, it seems there might be value here.
i have a minor problem with the wacom tablet CTH-461. the gestures and mouse sensitivity with the finger touch is too sensitive... i mean that the mouse is moving really fast and you have to be very careful when you are pinching / zooming with your fingers... and second question. where i have to submit this "bug" bcs the 11.04 is still alpha and i want the tablet to be in final release as much as possible supported.
View 3 Replies View RelatedI upgraded to Fedora 12 right after release, everything was working fine until update on previous weekend. Looks like it updated Wacom drivers and kernel. Now what I have. I hotplug my tablet in USB, and everything seems fine, I can position a cursor and press buttons, but after I press some button it hangs (LEDs on tablet are responding) I must remove Stylus from proximity in order to make it respond again (while stylus is away LED on tablet switches off for a fraction of second).
If I move mouse during tablet hanging, applications barely respond and if they are it is like mouse button is pressed (selecting text). I tried wacdump, and it's reporting everything's fine (X,Y, Tilt, Pressure everything shows up). I couldn't find evidence that wacom driver is controlling it, but I assume if wacdump is reporting then it is. I have:
Kernel 2.6.31.6-145.fc12.x86_64
linuxwacom.x86_64 0.8.2.2-15.fc12
I didn't touch xorg.conf in sense of tablet, but it worked for me in F11 and until now. I'm trying to make least manual configurations possible. Through exploring /proc/bus/usb/devices and kernel messages I confirmed that wacom drives is handling the tablet. And I noticed that in X's log
(II) config/hal: Adding input device Wacom Intuos3 9x12
(**) Wacom Intuos3 9x12: always reports core events
(**) Wacom Intuos3 9x12 device is /dev/input/event8
(**) Wacom Intuos3 9x12 (Wacom Intuos3 9x12) is not a pad
(**) Wacom Intuos3 9x12 is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Intuos3 9x12: reading USB link
(**) Wacom Intuos3 9x12: threshold = 61
(**) Wacom Intuos3 9x12: max x = 60960
(**) Wacom Intuos3 9x12: max y = 45720
(**) Wacom Intuos3 9x12: max z = 1023
(**) Option "BaudRate" "9600"
(**) Wacom Intuos3 9x12: serial speed 9600
(II) XINPUT: Adding extended input device "Wacom Intuos3 9x12" (type: Wacom Stylus)
(EE) Wacom Intuos3 9x12: Top/Bottom area overlaps with another devices.
(EE) Couldn't init device "Wacom Intuos3 9x12"
(II) UnloadModule: "wacom"
(EE) config/hal: NewInputDeviceRequest failed (1)
I've encountered quite similar error in openSUSE when was configuring tablet manually in xorg.conf. As I can see problem is with "pad" device, which I disabled in openSUSE in order to make X running. So why is it not working?
I recently purchased a Wacom Bamboo Pen Only (CTL-460). It's a great device and in Fedora 15 (x86_64) it worked out-of-the-box like a charm!
I don't miss the rubber or the extra keys on the tablet. But I'm having quite some trouble, using the pen as a mouse replacement in all day use. The following is with respect to usage outside GIMP and Inkscape (i.e. Firefox, Nautilus etc). What I would really like to have, is:
+ scrolling by pressing the "first button" and simply _moving_ the pen. Just like with my Thinkpad-Trackpoint: Here I press the middle key and can then scroll just by controlling the Trackpoint. Would already be cool, if I could scroll by pressing the "first button" and touching the tablet. A short tap while pressing the "first button" should still be a "middle click"!
Code:
Found a solution for "jamming at the edge of the screen". Just resized the "area" a bit (smaller) with xsetwacom...
this is on three separate laptops; an HP Pavilion 4120se, a Sony Vaio VGN-S5XP and a Dell Studio XPS1340. All are showing the same symptoms, though the first two are running 10.10 and the last is dual-boot Win7Pro and Natty 64-bit. All are UK models with a Region 2 restriction. The dual boot machine will run all legal movie DVDs perfectly under Windows 7 Professional. All three installations will run educational and similar DVDs. On all 3, Medibuntu repo is enabled, Ubuntu Restricted Extras are installed, as is libdvdcss2 and libdvdread4 (if those 2 can co-exist!). I'm using Movie Player and VLC.
I have tried UK retail commercial Region 2 movie DVDs, foreign region-free movie DVDs, Chinese pirate movie DVDs. None work. However, Licklibrary guitar instructional DVDs work fine - so the drives are OK! I've tried the oldest movie DVDs I have, and the same result. MP in Maverick tells me, "Could not read from resource" (VLC just does nothing!), and in Natty it says, "Could not read DVD. This may be because the DVD is encrypted and a DVD decryption library is not installed".
I have read as much as I can of the sticky above, and searched through every 'can't play DVDs' thread - hence the installation of all the above-mentioned software, codecs and libraries, all to no avail. Is it simply that the lack of commercial kick-backs from open-source software means Linux users will not be allowed to view movie content, or is there something fundamental I'm missing?
I have a wacom bamboo pen and touch (cth460/056a:00d1). Completed is the driver compile and installation to support this device.It is working. Is there anything special I need to do to accommodate Gimp (ieressure sensitivity) and dual monitors (ie:width)? Any particular command or config app? I know about xinput, wacomcpl, and xsetwacom.
View 1 Replies View RelatedI need some help to setup a simple 2 screens extended desktop. From my laptop with an nvidia card, it was very easy and done in seconds. But with my new desktop loaded with amd hardware, it's turning into a nightmare. I've posted on details of my hardware and of this problem here, and I'm encountering new trouble. Since then, my xorg.conf has changed a little without success:
[Code]...
After watching the absolutely amazing 10/GUI video, I have been dying to try to implement something like this. I can do the software side quite easily, but I don't have the hardware. The Wacom Bamboo Fun would work, but the Linux drivers don't support the multi-touch features. Microsoft's "UnMouse Pad" looks like the perfect solution, but it is not commercially available yet.
Are there any similar devices that would work? Alternatively, is there a way to build a DIY version? (It is fairly easy to build a multi-touch display with a webcam and IR LEDs, but it would not be pressure sensitive. Does anyone have any info on how the UnMouse Pad works and if it is possible to build one?). I should clarify that I don't want a multi-touch display. I want the sensor to be separate from the display. If that sounds crazy, watch the 10/GUI video.
I am running a multi monitor setup with xinerama, and everything works great except when I try to play an FPS such as OpenArena. The mouse doesn't work, it gets stuck to the screen edge.
View 6 Replies View RelatedI am trying to setup Dual monitors with individual (non-mirrored) desktops. AMDCCCLE will only identify the monitor I want to use as primary as number 2 and the monitor I want to use as secondary as number 1 - I have tasksbars, awm, desktop items configured to use the first screen and the second screen is clear for media use. The choice seems to be determined by what output port on my graphic card.. whatever monitor is attached to the HDMI port is called 1. xrandr can only identify the 2nd monitor - the first monitor is unknown I've attached my xorg.conf
View 9 Replies View RelatedI'm busy building a machine now and I'm looking to set up dual monitors because it's something I've always fancied but never had the resources to do. I'm basically looking for advice on choosing a graphics card that will support dual monitors with good driver support under Ubuntu. After a few hours of browsing the forums I determined nVidia were the way to go but I'm honestly not bothered if people want to suggest ATI. I'm not a gamer so really only need the card to support dual monitors. I'll also need to know how to set up the card under Ubuntu and then subsequently how to edit xorg.conf in order to get the dual monitors working.
View 6 Replies View RelatedI've just installed 10.04 on an old system.
Hardware is:
- NVIDIA GeForce 6600 GT video card
- Gigabyte EP35C-DS3R motherboard with 3 gig ram, few TB of hard-drive
- dual monitors, both viewsonic vx2235wm, primary on analog, secondary on digital (but whatever, happy to reverse the order)
On the old setup (8.04) the monitors were set up as twinview, 1680x1050 each, no problems. On the new setup (10.04) my old xorg.conf (see below) doesn't work and nvidia xserver settings refuses to detect my second (digital) monitor at any resolution greater than 640x480.
I've tried messing with xorg.conf to no avail and google doesn't appear to be my friend.
Here's the old xorg.conf file that worked in 8.04 but refuses to even boot under 10.04:
Code:
im trying to use my wacom tablet with fedora 10. I have looked around the net trying to find a simple way to install the driver but it is all rather technical would some one be able to give me a basic how to it would be great
View 2 Replies View RelatedI'm trying to get 4 monitors working in Ubuntu 11.04 the way I would like to. I have two Radeon video cards with two monitors connected to each. With proprietary ATI drivers and the Catalyst Control Center I'm able to see all the monitors and Have Multi-Display setups, but they're separated for each video card. I can move items to and from Monitor 1 to Monitor 2, and Monitor 3 to Monitor 4. I'm not able to move windows from 2 to 3 or 4. The two separate display setups have their own set of workspaces too. I've tried enabling xinerama, but when I log back in after a restart the screen is just black and I'm forced to reboot manually. The two separate displays wouldn't be that much of a problem except that my keyboard doesn't seem to work on any application opened on monitors 3 and 4 after I've clicked on something in Monitor 1 or 2.
Below is one of the configs I've been messing around with:
Code:
Section "ServerLayout"
#Screen "amdcccle-Screen[2]-0" 3840 0
#Screen "amdcccle-Screen[1]-1"
Identifier "Layout0"
[Code].....
As described in further detail below I am looking for some help in Ubuntu 10.10 with a multi-monitor + multi-gpu setup using both ATI and Nvidia video cards installed within the same system (que scoffs and jeers). Is it possible to sucessfully run both ATI and NVidia GPU's and Drivers simultaneously in Ubuntu 10.10 (think multi-monitor environment)? I am asking b/c I am having trouble figuring out how to manage my video cards - particularly ATI - within a multi-monitor + multi-gpu video card environment.
Here's the setup:
Ubuntu 10.10 Maverick Meerkat
x2 - NVidia 6800XT SLi GPU's + 2 DVI outputs/per card (Serviceable card for my needs)
x1 - ATI Rage XL PCI Card + 1 VGA output (Yes, ancient hardware...I know)
[code]....
Does anyone know of problems where 10.10 doesn't recognise more than one monitor? I've got nVidia 8500GT and I have the 'recommended' proprietary driver installed. I upgraded from 10.04, and dual monitor was working -> restarted -> dual monitor not working.
View 9 Replies View Related
