I browsed on internet to find how to upgrade to 11.04 and find the answer.Press Alt+F2 and enter the command update-manager -dAfter authentication, the manager showed the updates and at some point of time, I got the following error.
----
E: Encountered a section with no Package: header
E: Problem with MergeList
[code].....
An unresolvable problem occurred while calculating the upgrade:E:ErrorpkgProblemResolver::Resolve generated breaks, this may be caused byheld packages.This can be caused by: * Upgrading to a pre-release version of Ubuntu * Running the current pre-release version of Ubuntu * Unofficial software packages not provided by Ubuntu If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.
View 1 Replies View RelatedMy current setup was:
4 x 500 gb hard drives in (software / onboard controller) Raid 10 (1 +0) with Windows 7 x64 as the primary OS
1 500 gb hard drive with Ubuntu 10.10 installed
After upgrading to Ubuntu 11.04 Beta, I hit the Grub Error. I have removed the 5th HDD but still getting it on boot into Windows 7. I am currently in the process of copying all files from my raid via a 10.10 flash drive boot (fortunately was able to mount my raid's partitions).
I'm dual booting Windows 7 and Ubuntu. I wanna upgrade Ubuntu 10.10 to Ubuntu 11.04. I boot from the 11.04live cd, I select "install", but there's NO upgrade option.. How do I upgrade??
View 8 Replies View RelatedIs there a way to disable the "upgrade to natty" pop-up window on Maverick? I currently have no intentions on upgrading, and the pop-up is very annoying when I'm typing, and suddenly There It Is
View 2 Replies View RelatedI have a couple of 64bit Maverick installs from the minimal CD.They each have about 1100 packages installed. When I started to upgrade one to Natty with the Upgrade Manager, it told me it wanted to install 205 new packages (along with upgrading 877).205 new packages seems like a lot of growth in the minimal install.Why do I need those 205 packages?Then I looked at the minimal CD page where I saw that the minimal CD itself (which has lists of packages not the packages) grew from 15.6 to 22MB.So, did the minimal install just bloat up with Natty or what? Is there an even-more-minimal install?
View 3 Replies View RelatedUpdate Manager is inviting me to update from my Maverick Meerkat to Natty. Is this a good idea?
View 7 Replies View Relatedcan we upgrade lucid to maverick by using maverick live cd. what are the other methods for upgradation
View 3 Replies View RelatedI am still booting from my Ubuntu Lucid Lynx, and I want to upgrade to 10.04 Maverick Meerkat without losing any of the files, and work I have done so far. I have discussed this with a friend, and he has informed me that I can do this by going to the upgrade manager in the ADMINISTRATION menu under SYSTEM. He told me all I had to do was click install, and it would install all of the packages for me, and automatically upgrade everything to 10.10 without any loss of files and information. Is this true? Also currently I am dual booting from Windows XP, and Lucid Lynx. I have a 32 bit processor, Intel Dual Core.
View 2 Replies View RelatedI just upgraded my old laptop to Maverick, and something went wrong. The update process crashed near the end. I had to kill the window. Tried to do a dist-upgrade but nothing happened, so I rebooted. After the reboot, I got a black screen, showing "Disconnected from Plymouth", and a login prompt. But the keyboard is disabled, so I can't even log in. If I try the recovery mode, I get a menu with options to get to a command line, but the keyboard is still disabled (only Ctrl-Alt-Del works).I already had a similar error in Lucid: the black screen with the Plymouth error showed up, but after a few seconds X started anyway and everything went fine. Now I'm stuck.
View 1 Replies View RelatedI installed Lucid in my laptop like this:
/sda1 - ntfs windows xp
/sda2 - /boot (ext4,350M)
/sda5 - / (31528.59M)
/sda6 swap (3,2g)
/sda4 - ntfs windows data, music etc.
After I installed 10.04, I installed following programs:
-Chromium BSU (game)
-Chromium - Brownser
-Xchat
Then I followe EXACTLY this guide:
[URL]
But NO UPGRADE button appears. How Can I upgrade, without and make a fresh install? I also tried in CLI to:
z@z-laptop:/$ lsb_release -a
No LSB modules are available.
Distributor ID:Ubuntu
[code]....
I was just wondering how long I have to upgrade to 11.04 until Maverick Meerkat is EOL. I have talked to other people, and they say to wait about a month until after the release to fix all bugs and stuff. Is this a good Idea? Or should I update now and just get it over with?
View 1 Replies View RelatedI have no option to upgrade in the update manager. I suspect that this has something to do with the fact that I haven't been able to install a number of updates for a while (I receive the Partial Upgrade error message). Is there any other safe way to upgrade that can bypass this problem?
View 3 Replies View RelatedI use Ubuntu 10.10 Maverick Meerkat.I've heard of a newer version:Ubuntu 11.04(AKA,the Natty Narwhal).My question is:shall I upgrade to Natty?Any recommendations? When was the Maverick Meerkat released?
View 2 Replies View RelatedI updated my ubuntu today from 10.04.1 to 10.10 and my microphone stopped working. I spotted a message during the loading of 10.10 that modprobe failed starting because some file was missing.
View 2 Replies View RelatedSince upgrading my mythbuntu box from lucid to maverick my boot times have been much slower. Looking at dmesg I can see delays. Can anyone who knows more than me point me in the right direction to fix these?
Code:
[ 2.123939] usbhid: USB HID core driver
[ 2.396712] EXT4-fs (sda1): orphan cleanup on readonly fs
[code]...
I'm just wondering if there's a page out there that lists the improvements and other changes to Ubuntu from Maverick to Natty.
View 2 Replies View RelatedWhen i upgraded the whole process went all right then when I logged in, i mostly saw black and no unity bar could barley get around.
View 2 Replies View RelatedWhen I try to upgrade from 10.04 to 11.04 I always get this error:
Code: E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
If I run sudo apt-get dist-upgrade, I get:
Code:
~$ sudo apt-get dist-upgrade
Leyendo lista de paquetes... Hecho
Creando rbol de dependencias
[Code]...
Apparently there's nothing wrong in apt.log, but i cannot upgrade and i don't know how to fix it. Any clue?
I upgrade to 10.10 via online upgrade yesterday morning. All seems to run fine, and before the yesterday afternoon upgrade, compiz appears disabled and each time I try to enable it I get the error message.I checked the direct rendering is working. Google Earth works fine also, so all seems to be OK.
My system: Eee PC 1201n, Nvidia Ion, 4 Gb Ram, 320Gb HD
Ubuntu Maverick updated.
Can not upgrade An upgrade from 'karmic' to 'maverick' is not supported with this tool.
View 1 Replies View RelatedI currently use Karmic Koala (9.10) and want to upgrade to Maverick Meerkat (10.10). The thing is that Update Manager allows me to upgrade only to 10.04 (Lucid Lynx) but I cannot upgrade to Lucid Lynx because of a bug which freezes my keyboard and mouse. Also, upgrading first to 10.04 and then to 10.10 is quite time consuming. Can I upgrade directly to 10.10 from 9.10 without 10.04 acting as a mediator?
[URL]
I accidentally cancelled the upgrade (ctrl-c) to maverick before it finished on one of my servers. It was during one of the questions about installing an updated config file. If I run "sudo apt-get dist-upgrade", it complains that it can't lock the directory /var/lib/dpkg. What can I do to recover this and continue with the upgrade?
EDIT: forgot to say this system is running ubuntu-server with no GUI
I seem to have made a hash of moving a machine from jaunty to maverick. It used the kde3 remix, and pearson's site seems to be bouncing up and down, mostly down, for that at the moment. I've ended up with a machine that is console only. I've tried installing ubuntu-standard, which put a bunch of things on, but still no GUI.
staying with KDE3 would be nice, but I don't have time to mess with it. I find KDE4 painful, and have been put off by the ideological "purity" that caused the gnome split since its inception. I guess that leaves me with Unity. But how do I get the bloody thing up. Heck, xdm & fvwm sounds pretty good right now, too.
I have an 10.10 Maverick Ubuntu, and I've tried to update it to Natty version, but when I try it says to I check my connection with Internet and then close the update app, but my connection is fine, I think this could be something related to the host, since when I try to use sudo or play Frets on Fire it says that they "couldn't resolve the host".
View 2 Replies View RelatedI have successfully upgraded from 10.10 to 11.04, computer was rebooted and I got working Ubuntu Natty. I did not altered any settings and switched computer off. When I tried to boot computer today I got Ubuntu load screen, but OS does not load properly (only load screent, startup sound and that's all).I am able to load terminal as root. How can I troubleshot my problem?
View 1 Replies View RelatedI tried to upgrade to 11.04 from 10.10 but I get this error every time.
View 4 Replies View RelatedI've just upgraded my Mythbuntu box to Natty. Now I have a completely unusable system due to Xorg taking 70% of CPU. Mouse movement is possible and I can just type but that is about it. Using MythTv is impossible.I'm running a standard mythtv build with the xfce desktop how to fix this one as it has rendered my PVR system impotent.
View 4 Replies View RelatedI've upgraded my netbook from Lucid to Maverick, and have a couple of questions:
1. My start-up apps don't appear to be running. In particular Tilda and Gnome-Do don't start up - and removal of the "Alt+F2" shortcut to run programs makes it hard to start them manually.
2. I'm still getting the old launcher as the desktop, with no search box in the top bar. (In many respects having the old launcher isn't so bad, as I'm Not Friends with the new Unity side-panel.
I recently upgraded from Lucid Lynx to Maverick Meerkat and my OpenOffice.org Impress presentations' sound is not working. I don't have any issues affecting sound in other applications.
View 4 Replies View Related
