Ubuntu Installation :: Kernel Doesn't Support Install To Firewire By Default
Mar 28, 2010
I've a PowerMac G4 MDD that has OS X Leopard on it. I have repartitioned it to accommodate an Ubuntu install. However, I have no Disk Drive in the G4, it was broken so I removed it. Now I have an iBook G4 I have tried using an ubuntu cd on to install to the said PMac in TDM, but of course after reading the Ubuntu kernel doesn't support install to firewire by default. Can someone help me by compiling a Cd image I can use to accomplish this or tell me how without the use of another linux box?
View 2 Replies
ADVERTISEMENT
Jan 12, 2011
I am installing Ubuntu Server 10.10 on and old Dell Laptop. The network connection is an Xircom PCMCIA card.During install, the computer sees and interacts via the network just fine. For example, I can ping the gateway. Also, the command "lspcmcia" works and show the Xircom card.When I reboot, however, there is no network access, and the "lspcmcia" command is not there. When I try "lspcmcia" the OS helpfully tells me that I can "apt-get" pcmciautils, but, without network access, that fails.I tried adding the install cdrom to apt using "apt-cdrom" and then tried to "apt-get" pcmciautils and it got further, installing some dependencies, but acted like it still was unable to locate the pcmciautils package.
View 1 Replies
View Related
Jan 8, 2010
I am installing a new large 4 Tb RAID (hardware) under 9.10. Does GPT support come by default in the new 9.10 kernel? How can I check? I gather I need to use PARTED to make a GPT partition table on the raid. Anyone know details of how to do this? [URL]...
View 2 Replies
View Related
Feb 18, 2010
I just want to know what is the default Fedora 32 bit kernel - does it support more than 4G memory. I would like to save myself from compiling custom kernel and all following fiddling (nvidia drivers, virtualisation software etc) and 64bit OS is not for me - too many apps that I need are missing, of poor quality or need more manual intervention. Actually if bigmem / whatever it is called is configured in the default kernel, this may be the reason to switch. I intend to use 4 to 8 GB memory and it's a desktop, so server builds (like Ubuntu) are not for my taste.
View 2 Replies
View Related
Jul 9, 2011
I want to add a Lacie external drive to x64 box with SL55, but it has only Firewire interface. After searching a bit the net I could not find a working solution how to make the PCI card and the drive recogizable by the system, even if I removed Firewire from RHEL blacklist. The system does not see this piece of hardware. Does anyone has a positive experience with RHEL/SL with that issue? Similar trends search lists only quite old treads - ane recent experience?
View 18 Replies
View Related
Jul 21, 2010
differences between Kernel Default and Kernel Desktop? I've found some past threads like this link and this other link, and some other google info, which suggest the only difference would be the io scheduler. Also, I see the default grub choice is "Desktop" and not "Default", so I take this as a suggestion to prefer one over the other.
However, my broadcom 4312 wireless only works on the "default" and not on the "desktop" kernel, so I guess there must be other differences. I just want to evaluate which one is the less long-term risk option to go.
View 1 Replies
View Related
Feb 7, 2011
I want to enable Firewire for my audio interface. I'm using ubuntu 10.10 (64 bit version).
lspci returns that I have a Texas instruments chipset. But when I search the kernal log file with grep, there are no references to this. I've searched for 1394, found nothing. I've read the whole thing and found references to Firewire_core, but looking online, this appears to be something else? I may be wrong, but my device is not recognised anywhere, as far as I can tell.
I have checked in Synaptic that I have the 1394 libraries installed, I do. And checked their dependencies are present.
I know that the device and the mobo are fine, as windows identifies the device with no trouble.
Can anyone tell me, what universe and multiverse means in relation to Synaptic packages, and how to enable these settings?
Also, should I expect my Firewire device to appear in the Places menu when it is recognised? It hasn't as yet, and I don't seem to be able to select for use as an audio interface in Ardour, the linux studio-recording program.
Maybe I've missed it completely, but I think the key problem is thers no reference to 1394 in my Kernel log.
lspci returns
03:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
and the firewire_core stuff in the kernel.log
Feb 7 17:16:36 johnny-ubuntu kernel: [ 1.355772] firewire_ohci 0000:03:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[Code]....
View 1 Replies
View Related
Feb 19, 2010
I'm experimenting with a load balancing setup and have found some pretty good guides, but they all assume that ipvs support is built into the kernel already. e.g. http://www.howtoforge.com/high_avail...apache_cluster
So of course "modprobe ip_vs_dh" simply outputs "FATAL: Module ip_vs_dh not found."
View 2 Replies
View Related
Jan 29, 2010
My laptop doesnt support USB booting, has no optical drives but does have an FDD.If copy the install folder onto a USB drive, boot from a floppy and load USB drivers for the drive, can I then install from there without issue?
View 2 Replies
View Related
Mar 13, 2011
i just downloaded Ubuntu10.10,i used to burn the .iso file to a cd and then boot using the CD. recently my cd/dvd writer crashed and i was wondering could i boot from my pen drive in such cases,i also prepared a bootable pen drive but in my BIOS settings there is no option visble for such booting.
View 8 Replies
View Related
Apr 27, 2011
I've just installed 11.04 but can't have unity since it doesn't support ATI Radeon HD 5600 series along other ATI cards. Anyone who knows when ubuntu is planning to solve this problem?
View 2 Replies
View Related
Mar 12, 2011
i just downloaded openSUSE 11.4,i used to burn the .iso file to a cd and then boot using the CD. recently my cd/dvd writer crashed and i was wondering could i boot from my pen drive in such cases,i also prepared a bootable pen drive but in my BIOS settings there is no option visble for such booting.
View 6 Replies
View Related
Jan 20, 2010
I was wondering if there's a way for me to get real-time kernel support on regular Ubuntu 9.10 through some sort of update. I know Ubuntu Studio has a real-time kernel, but I'd prefer not to use it. I'm a fan of the original Ubuntu.
View 1 Replies
View Related
May 13, 2010
I just installed the latest version of Ubuntu 10.04 LTS, and am wondering if support for my dual AMD processors is built into the generic kernel, or do I need to compile a custom kernel? I have an HP tx2-1025dx touchsmart.
[Code]....
View 2 Replies
View Related
Oct 13, 2010
I have a PCI SCSI controller with this chipset that was working fine in 10.04 to drive a Polaroid Sprintscan 35 Plus scanner. Having just run the upgrade to 10.10, the scanner is no longer being seen. If I go into the controller BIOS the scanner is seen there, and running lspci shows the controller as
Code:
SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 04)
Running
Code:
sudo modprobe -l | grep "sym"
shows only
Code:
kernel/drivers/scsi/pcmcia/sym53c500_cs.ko
kernel/drivers/scsi/sym53c416.ko
kernel/drivers/usb/serial/symbolserial.ko
Seems like support for the 53c8xx chipset has disappeared?
View 4 Replies
View Related
Oct 1, 2010
I installed the latest kernel liquorix (2.6.35) but when i want to install the Nvidia driver downloaded on the Nvidia website (256.53), i have an error message because Nvidia doesn't found the kernel source tree.
I install linux-image-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb, linux-headers-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb and build-essential. I don't understand why the installation doesn't works.
View 1 Replies
View Related
Aug 24, 2009
i've downloaded and burn the live cd of690MB, ISO format, 1 CD-ROM disc image for Intel-compatible PCs (32-bit) I am trying to install on my desktop which runs on phenom,it just doesn't bootbut on the other hand on my thinkpad laptop it works...
View 3 Replies
View Related
Jul 10, 2011
I'm trying to find out when QME2572 (Qlogic) card became support by the kernel. We have a RHEL 5.1 system that is moving to new hardware, however the kernel at this release doesn't support the new hardware, due to the Qlogic card change. I tired the Redhat KB and Bugzilla. Is there a Kernel change list etc I can search. Never really played around with the kernel too much so I'm just after some pointers for looking up this information. Offically its not supported until Redhat 5.3, I'm trying trying to research kernel info so I can tell the customer they have to upgrade.
View 3 Replies
View Related
Jun 13, 2011
I have had for a test installed Feodora but was so silly checking the box for encryption the HD. Now I tested all for removing Feodora (no data anymore on the disc) but even the test unlocking this from my ubuntu system failed with the following error:Error unlocking device: cryptsetup exited with exit code 251: Command failed: Failed to setup dm-crypt key mapping.Check kernel for support for the aes-xts-plain64 cipher spec and verify that /dev/sdb2 contains at least 508 sectorsI installed some encryption packages in the meantime - but non was helpful.Would some kind person - who understands this better than I - please provide the detailed steps needed to mount and unlock the encrypted Feodora installed hard disc. Maybe one of you know which packege I have to install.
View 2 Replies
View Related
Mar 14, 2011
i'm currently using windows vista and want to boot opensuse11.4 from my usb drive but my BIOS doesn't support it. please explain steps to install it on vista hard-disk,i'm getting confused following steps posted on theris website
View 4 Replies
View Related
Apr 20, 2010
telling me if this behavior of my openSuSE 11.2 installation is normal? I use a 64-Bit openSuSE 11.2 with kernel 2.6.31.x with root partition ext4. After adding and updating from repository kernel:/HEAD/etc to 2.6.34-rc4 I can not boot anymore due to a lack of module ext4. I thought today ext4 is stable and fix built-in in the actual kernel releases, isn't it? The error message at boot time: FATAL: Module ext4 not found. Which is right because in /lib/modules/<kernelversion>/kernel/ there is NO 'fs' subfolder. Isn't the kernel:/HEAD/ repository the official update path to get a newer major kernel? (besides openSuSE's Updates for security reasons) Do you know how I can fix it without self-compiling?
View 5 Replies
View Related
Apr 11, 2010
I am a newby in linux. i wanted to install lampp (xampp) but it gaves me an error that the operating system doesn't support 32 bit. I am using at this moment Fedora 12 x86_64.
I looked in another thread and they sad that i need to run yum whatprovides missing_lib_name but it don't show anything is there another way to get 32 bit support in linux because i really need xampp.
View 2 Replies
View Related
Oct 11, 2010
So I installed Ubuntu Server 10.10 64-bit for testing purposes. But when I went to connect it to my wireless network at home, it showed that iwconfig wasn't installed by default like it did in 10.04. Does anyone know how I can either connect my system to the network without using iwconfig, or how I can get iwconfig and install it from a flash drive or some other form of digital media? And I can't do apt-get since I can't get on my network. And I also can't plug in a ethernet cable because my network port is broken.
View 3 Replies
View Related
Mar 22, 2011
I am impressed with 11.4 and am happy that for the first time ever I don't need to install a kernel patch to support my on-board nVidia graphics. However, the on-board sound no longer works now. I don't know how to set it up in phonon. My device number 0 in phonon is MCP72XE/MCP72P/MCP78U/MCP78S high definition audio, and I assume this is my nVidia on-board sound card. The driver information states snd-hda-intel.
How can I check what is wrong with it? It did work fine on 11.2 right up to the 11.4 installation. I do get system sounds (like the start-up and shut-down sounds), but nothing from any application, e.g., firefox playing a video. Based on the advice from another thread I tried: speaker-test -c2 -l5 -twav This does not produce any sound, but gives the following information: speaker-test 1.0.24.2
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
WAV file(s)
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 96 to 1048576
Period size range from 32 to 349526
Using max buffer size 1048576
[Code]...
View 9 Replies
View Related
Dec 21, 2008
I'm using openSUSE 11. I'hv tried to upgrade it to 11.1 with a x86_64 installation DVD (as I did earlier), but it failed. It showed the following message:
[Code]...
eventually same type of problem happend when I was trying with fedora 10... fedora 9 and openSUSE 11 install smoothly in my 64 bit machine (compaq SR1730IL, Intel pentium 4, 524 and 1GB DDR2 RAM)
View 5 Replies
View Related
Apr 28, 2011
After Upgrading to 11.04 32bit, the PAE Kernel loads by default. This would be great except it hangs probably due to graphics not loaded properly.
Regardless I do not want to use PAE Kernel on this dev system I have and luckily it looks like the Generic Kernel of the right version is in a sub-Menu called Older Linux Versions.
I have played with Grub2 before making minor changes but this one is a little beyond me. How can I move the regular Generic Kernel from the sub-Menu and make it my default Grub2 kernel so I boot to it automatically.
View 5 Replies
View Related
Jul 30, 2011
During tests with 11.04, I met very big problems on my HP ProBook 6550b, which is all intel , but rather recent hardware, so it is 64bit. When I install ubuntu, the -pae kernel is installed by default. All did work so far with 10.10, but with 11,04 I get frequent crashes, particularly all kind of browsers will crash every few minutes, no way any flash will work, also office seems to freeze the system very frequently.
This regardless if the 11.04 is run from life CD or installed properly. Somewhere I read, that such behavior was cured when the -pae kernel was replaced by its normal (non -pae) variety. On a very old toshiba, with some old celeron, I may not have the initial performance, but crashes are 90 percent less frequent, as there ubuntu chooses non -pae kernel automatically. Therefore I am thinking the -pae kernel could be the problem.
View 5 Replies
View Related
Feb 26, 2010
I loaded Kubuntu 9.1 and got a mess in the Grub 2 Boot Menu, which I can't correct.
I get extra choices in the Boot menu, and the first few, which are supposedly for Kubuntu Karmic Koala all put me in a shell, which ends in a black screen, then shows up a shell once I hit "enter". Then I just have a "intramfs" (?) prompt.
So I went into Grub2 to change it, and it refuses to do it. All I get is a screen full of error messages every time I try, with no change. Apparently it is looking to access drive sdb8, which is non-existent. I DO have a drive sda8, though.
So with all the wonderfulness of the indirect system to change Grub 2 how am I supposed to set it right? The old Grub worked fine, and just took simple changes to the menu.lst file.
Can't somebody write a program that lets Grub 2 be changed from within the program, rather than all this running around trying to find what file to change, and how to get the change to work?
Just to be clear, here are the errors as they show up when grub-update is flailing around:
"error: cannot open '/dev/sdb' while attempting to get disk size
error: cannot open '/dev/sdb' while attempting to get disk size
Generating grub.cfg
error: cannot open '/dev/sdb' while attempting to get disk size
[Code].....
View 9 Replies
View Related
Feb 1, 2010
i want to reinstall my OS, but use kernel 2.6.31.5 instead of 2.6.31.8. Are there settings in the install that I can change to do this automatically?
View 1 Replies
View Related
Jun 10, 2009
I've just downloaded F11 i386 installation DVD. I installed it on my laptop and just now noticed that PAE kernel got installed. Isn't PAE for systems with RAM >3.2 GB? It's a pretty old laptop (P3, 256MB ram). So, is PAE kernel ok for me or should I reinstall from scratch and use some specific switches in the installer to get non-PAE kernel? I've also read that Yum doesn't recognize PAE packages dependencies and will install non-PAE kernel modules if I try to install let's say Nvidia driver or so.
View 11 Replies
View Related
