I could play the particular DVD in the output below without problems yesterday. Today, totem just sits there and outputs these messages to a terminal:Quote:
~$ totem
libdvdread: Using libdvdcss version 1.2.9 for DVD access
libdvdnav: Using dvdnav version 4.1.3
[code]...
I just upgraded from 8.10 to 9.10 and now my sound doesn't work (note: I don't know if sound was working on 9.4, since I only ran that long enough to upgrade again) Sound was working just fine under 8.10, and I just tried booting up with a livecd I had handy, which is 8.04.1 and sound worked right off the bat, no problems.I've checked the volumes on everything, including the master volume which WAS initially set to 0.Sadly, turning that up did nothing.The Pulseaudio Volume Control app seems to think nothing's wrong- it's picking up the sound from various applications just fine, the volumes are all on, etc. (aplay lists my soundcard fine:
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: VT1708B Analog [VT1708B Analog]
Subdevices: 2/2
[code]....
I'm currently running Ubuntu 9.10.After I updated to 9.10, my wireless connection stoppped working. I can access the network but I get no response or what so ever in my browser.Downloading language support or any software doesn't work either.Haven't changed anything to my settings and checked the router. Router works just fine.
View 7 Replies View RelatedI upgraded from 9.10 to 10.04 and my VMware stopped working. I got a message to recompile into the kernel. I followed the prompts and it was unsuccessful. I tried to uninstall and reinstall VMware getting the same error. See below an extract from the log file.Before you can run VMware, serveral moduels must be compiled and loaded into the running kernel.
stopped vmware services - ok
Error in log:
Nov 09 07:59:34.560: app-3077531328| Trying to find a suitable PBM set for kernel 2.6.32-25-generic.
Nov 09 07:59:34.560: app-3077531328| Building module vmnet.
Nov 09 07:59:34.560: app-3077531328| Extracting the sources of the vmnet module.
[code]....
The problem i'm having is that my microphone stopped working after the upgrade to 10.10. Ubuntu doesn't seen any sort of input device any more, no line-in , no mic ( front as back ).Own on to the specs of my machine:It has a realtek ALC861-VD audio chip.2 mic jacks, 1 line-in , 2 out (front and back) and a coaxial port thing .The os is a upgraded from 10.04 to 10.10 and everything except this and my tv card sound works.I have pulse audio tools and alsa mixer ( although it broke during upgrade ) installed.alsa info is available upon request, so is any other info may you need it.
View 7 Replies View RelatedI just upgraded to karmic the other week and now my webcam isn't working anymore. here is my dmesg output
[Code]....
the last two lines are added whenever I try to run mplayer or skype on the webcam. We are currently using uname -r: 2.6.31-19-generic (64 bit), but the problem was the same on 2.6.31-17-generic
I'm an Ubuntu/Kubuntu user for a while now and i hav Kubuntu 9.10 with ubuntu-desktop installed.
I have two hard disks and i had one of the partitions mounted automatically while startup. I did that by reading the first method posted here
HTML Code: [URL]
It was working good till i did the distribution update to Kubuntu 10.04. After the upgrade while startup, a message is displayed on the screen saying
Quote:
"Disk to be mounted at /media/miscellaneous is not ready or is not there. Continue waiting or press S to skip mounting or M for manual recovery"
I dont know what to do. I have to skip and then mount the partition manually. I think the entry i added in
Quote:
/etc/fstab
is still there.
Like many others it seems, my wireless has stopped working since a recent upgrade The answer does not lie in analysis of logs, settings etc. but surely with those who did it - they should provide a fix. I cannot believe everyone expects each individual users to go into their own analysis of why this is no longer working as it is clearly widespread. I have been using Ubuntu for 18 months without this problem on the same dual-boot laptop, and it still works on Windows as before, only Ubuntu 10.4 has recently stopped my network card from working.
I need to know when this will be fixed. I have been embarrassed by promoting Ubuntu to many colleagues who now also cannot work at home on their wireless networks. Seriously disillusioned I may start looking for a more stable alternative to Windows.
I updated my Ubuntu to Meerkat last night. everything seems to be working fine, except when i went to iplayer, it told me flash wasn't installed. I followed the link, and installed flash from APT source. In the software centre it is listed as installed. However, still cannot view flash videos.i have tried rebooting too.
View 2 Replies View RelatedI've just upgraded my Ubuntu version a week ago and got a problem that the Unity UI won't running after upgrade. My laptop is Dell Inspiron 14R which is i think is more than capable for running Unity 3D. When I rebooted after upgrade there was just a blank wallpaper screen, without Unity interface at all.
View 7 Replies View Relatedi have a dell 1501 that has been upgraded from 10.10 to 11.04. everything was working okay. and then the user ran an upgrade recently. subsequently the wifi has mysteriously stopped working. it connects okay if one plugs it directly into the router but the wifi seems to have just stopped working.my mini 9 connects fine to the netgear wifi router using wireless.when i run the system tests for networking i get the errors..."root could not find def gateway info /proc""root could not find default gateway by running route"here is the output from some diagnostic commands.NOTE:this is similar to a post titled "wi-fi dead?" but the output is not quite the same...
lauren@lauren-Inspiron-1501:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[code]....
Dell Vostro 230 with integrated Broadcom NIC.
Wakeonlan was working just fine with Wheezy on this machine. After upgrade, wakeonlan will resume from suspend but not from shutdown.
I have no problem with other machines (same software setup) after upgrade. None of my other machines have a broadcom NIC.
No BIOS settings were changed during the upgrade. If I enter the BIOS on boot and make sure settings are correct then 'save' and shutdown, without booting to debian, I can then successfully wakeonlan. Then, if I do not boot debian, but shutdown before debian starts, I can wakeonlan successfully again.
If I boot debian and then shutdown, game over: wakeonlan nolonger works.
$ ethtool eth0 | grep -i wake
Supports Wake-on: g
Wake-on: g
A bit of research found the suggestion:
$ lspci -tv | grep -i ether
+-1c.2-[02]----00.0 Broadcom Corporation NetLink BCM57788 Gigabit Ethernet PCIe
$ cat /proc/acpi/wakeup
Device S-state Status Sysfs node
P0P2 S4 *disabled
P0P3 S4 *disabled
[Code] ....
How to get wakeonlan working under Jessie with a Broadcom BCM57788?
I had my Canon DV camcorder working well with Kino for capture in Fedora 11. I upgraded to F12 recently and tried to capture some video tonight. It does not seem to even recognize my camera.My card: 02:08.0 FireWire (IEEE 1394): Agere Systems FW322/323 (rev 04)My kernel: 2.6.31.12-174.2.22.fc12.i686.PAEI read somewhere about installing ieee1394 kernel modules from ATRPMs and rebuilding the kernel but
View 1 Replies View RelatedWell I guess the topic says it all. I've recently upgraded to Maverick from Lucid all went smoothly until i restarted and realized that the remote desktop server included stopped functioning all of a sudden. tried other vnc servers with no luck.
View 9 Replies View RelatedI have a Broadcom wireless card in my hp dv6500z laptop, I had it all working properly in FC9 thanks to bbfuller and his post on the subject. After I upgraded to FC11 I have been unable to get it to connect.
I can see my neighbor's sites and suppose I could see my own if the SSID was allowed to broadcast but I keep that turned off. I put in all of the setting, including the network security key, but it won't connect, then when I go back and look again, the security key is not even close to what I put in; it gets changed to a huge string of characters.
I redownloaded broadcom-wl-4.150.10.5.tar.bz2.tar and followed the instruction on the post once again but no luck, which, after I thought about it, was a waste of time because if I can see other's wireless, then the card must be working. I have tried using Network Manager and not using Network Manager and still no luck...
I am running Fedora 14. I've had an ASUS wireless adapter working for a few months now, with no problems. Today, I installed updates, one of which required a computer reboot (not just logging out and back in). I rebooted the computer, and when it came back up, the wireless adapter did not work.The adapter is visible after lsusb, but there is no wireless showing after iwconfig. What happened? How do I fix it?
View 10 Replies View RelatedI recently updated to squeeze following the Debian release note steps, and most everything went smoothly. However, I'm now unable to get into the Nagios web interface. The service is still running and sends email notifications of issues as usual, but logging into the web interface gives me a 403 Forbidden error.
View 14 Replies View RelatedMy Dell Latitude 2100 worked fine with the pre-installed Ubuntu 9.04. I upgraded to 9.10 and the touchpad stopped working. Restored to factory condition and it again worked fine. I re-did the upgrade, this time asking it not to delete the obsolete items.
View 3 Replies View RelatedSummary: a long-working config involving a 1st-generation Ipod Touch with v1 firmware, Ubuntu, and Amarok 1.4 stopped working when I upgraded to Lucid.
A few years ago I was given a 1st-generation Ipod Touch, running the original v1 firmware (I never upgraded to the v2 firmware because v2 wasn't jailbroken at the time). I took it to a friend's place to activate and jailbreak it with her Mac laptop (I didn't have a Mac or Windows machine to install Itunes on; have been Linux-only for many years). Once jailbroken, I was happily able to use it with Hardy, Amarok 1.4, and ipod-convenience (which supply ipod-touch-mount/ipod-touch-umount).
This continued through upgrades to Intrepid and Jaunty. I didn't care for Amarok 2 in Jaunty, so I installed Amarok 1.4 from the ppa someone else made available. I continued to use it through Jaunty and Karmic, without any problems.
Last week I upgraded to Lucid. Syncing Amarok 1.4 to the Ipod Touch no longer appears to work; the Ipod fails to recognize any music transferred onto it (standard "No Music - you can buy music at Itunes" error screen), so I presume this is a libgpod/hash error. I have the FirewireGuid properly set in the .../Device/SysInfo file, as I always have.
Every time I use the Amarok Ipod "connect" function (which runs ipod-touch-mount) it tells me no valid Itunes db was found, and asks to initialize the db. I can then transfer music to the Ipod, and successfully disconnect, but it's not recognized on the Ipod after a respring or reboot.
I've tried RhythmBox and gtkpod briefly with no luck either.
Relevant installed packages:
Code:
ii amarok14 2:1.4.10-0ubuntu3~ppa5 Amarok 1.4 series
ii amarok14-common 2:1.4.10-0ubuntu3~ppa5 architecture independent files for Amarok
[Code]....
Edit: a little more info: after I let Amarok initialize the Ipod Touch and transfer a song to it, the iTunes.db that gets created on the Ipod is 0 bytes long. I presume this is the source of the problem, and indicates something is going wrong with libgpod's creation/editing of the db.
what I should do from here? I've tried removing the DB by hand, but it makes no difference - the subsequent operation to initialize the db results in the same 0-byte file.
On install my wifi was working, but when I rebooted it stopped working.Since then I've tried numerous things to attempt recovery of wifi. No luck so far.
View 14 Replies View RelatedMy GNOME system stopped using the proprietary NVIDIA drivers after the recent dist-upgrade to v6.0.1. It was working perferctly before that.
My inxi output:
inxi -F
System: Host thirra-ws1 Kernel 2.6.32-5-686 i686 (32 bit) Distro Debian GNU/Linux squeeze/sid
CPU: Dual core Intel Core2 Duo E7500 (SMP) cache 3072 KB flags (sse3 nx lm vmx) bmips 11703.9
[Code].....
When I tried to configure the screen resolution using NVIDIA X server settings, I was told to run 'nvidia-xconfig'. I ran it, restarted X but my resolution is still stuck at the maximum of 1024x768. I've tried running the above many times with the same results. I even tried aptitude reinstalling but still the same.
I have used a quite obscure device called Cideko AK0b [URL] .... for quite some time now and it has worked perfectly for almost 2 years now, both in Wheezy and in Jessie. However since I made an dist-upgrade a while back the mouse has totally stopped working. The system works through wifi - strangely enough - but everything else works. Keyboard and gamepad buttons. The manufacture says the things doesn't work on linux and so far I have proved them wrong.
But now the mouse is just out right dead no matter what I do. Have looked into mouse autosuspend but no avail so far. My suspicion is systemd but that is as good as any guess.
Running 3.14-2-amd64.
This is my dmesg.
Code:
Select allroot@cryptserv:/home/dencrypt# dmesg | grep Cideko
[Â Â 3.158099] usb 6-3: Manufacturer: Cideko Inc.
[Â Â 3.469194] input: Cideko Inc. AK08b Device as /devices/pci0000:00/0000:00:12.1/usb6/6-3/6-3:1.0/0003:20E8:5860.0001/input/input2
[Â Â 3.469329] hid-generic 0003:20E8:5860.0001: input,hidraw0: USB HID v1.10 Keyboard [Cideko Inc. AK08b Device] on usb-0000:00:12.1-3/input0
[Code] ....
My Intel Corporation WiFi Link 1000 Series wireless card stopped working yesterday after I did an update via Update Manager.After the upgrade, wireless is disabled and the option to enable it in Network Manager is grayed out. I thought that it might be the new kernel, but changing back to the old kernel I still have the problem.
View 8 Replies View RelatedLast night I upgraded to Lucid from Karmic, and now I can't play any DVDs (physical or ripped). These worked fine in Karmic, but now when I select them, playback freezes on any menu, and I have to kill the front end process. Mythtv is set to use the internal player, but I have the same issue with VLC.
View 4 Replies View RelatedWhen originally installing 11.04 I had problems getting my Ralink 5390 wireless card to work.
Today my computer froze completely and I had to turn it off via the power switch. When I turned it back on, wireless was no longer recognized! My iPod can connect to the network just fine, so it must be an Ubuntu problem. There are no problems with my ethernet connection either.
I researched this and found several threads about blocking and unblocking wireless devices using the rfkill command. Well, unfortunately for me the rfkill command doesn't work. When I type sudo rfkill list or sudo rfkill unblock all, nothing happens; it just returns me to my bash prompt. I even tried uninstalling and reinstalling rfkill...nothing.
I have libdvdcss, libdvdread (i think it was called), and restricted extras - i even followed the instructions on the documentation. they still wont play. I run 9.10 64bit on my laptop, and 10.04 on my desktop.
View 9 Replies View Relateddvd playback not working - how to make it work
View 2 Replies View RelatedI installed today xubuntu on my new Asus eeePC 1015B I have only one mayor issue left. Could not get the HD playback wokring right now. in the 1015B there is a ATI HD6250 build in I installed the properitay driver 11.7 Catalyst. (I followed the Ubuntu Natty Installation Guide from [URL]... Than I installed libva1 from PPA: [URL]... and its modified vlc player. Also I installed [URL]... When playing a Video my CPU goes to 100 so I guess the hardware acceleration does not work..
[Code]...
What can I do next? VLC has its inner option set to use Hardware acceleration
I'm having some problems with flash in mozilla and chrome. video playback is fine but none of the buttons are working.for example i cant pause or change the volume. pretty sure my flash is up to date. i have ubuntu netbook remix on another pc without this same problem.
View 8 Replies View RelatedI have the nvidia sound card built into my motherboard. Just a few hours ago it started to just stop making any noises what so ever. I rebooted but to no avail. I finally was able to find a fix by purging pulse AND alsa, then reinstalling them and rebooting. The problem is this will only allow my sound to work for about 10-15 mins. Kinda hard to watch "'Neath the Arizona Sky" if you gotta reboot every 15 minutes or so...
I have also purge and reinstalled ubuntu-desktop and that will work temporarily and extend me out another 10-15 mins from when it stopped, but then I still have to reboot.
I am using 10.10 Maverick 64 bit and have been using it for a while, this is the first time this or any other problem has occured.
I have been through the forums and checked every thread I could find with a Bingle search that was in any way related to random sound stoppage. I have tried most of them (did not try the ones that were specific to other cards as far as editing the .conf's for those cards)