Ubuntu Multimedia :: Ipod Touch V1 With Amarok 1.4 Stopped Working On Upgrade To Lucid
Jun 8, 2010
Summary: a long-working config involving a 1st-generation Ipod Touch with v1 firmware, Ubuntu, and Amarok 1.4 stopped working when I upgraded to Lucid.
A few years ago I was given a 1st-generation Ipod Touch, running the original v1 firmware (I never upgraded to the v2 firmware because v2 wasn't jailbroken at the time). I took it to a friend's place to activate and jailbreak it with her Mac laptop (I didn't have a Mac or Windows machine to install Itunes on; have been Linux-only for many years). Once jailbroken, I was happily able to use it with Hardy, Amarok 1.4, and ipod-convenience (which supply ipod-touch-mount/ipod-touch-umount).
This continued through upgrades to Intrepid and Jaunty. I didn't care for Amarok 2 in Jaunty, so I installed Amarok 1.4 from the ppa someone else made available. I continued to use it through Jaunty and Karmic, without any problems.
Last week I upgraded to Lucid. Syncing Amarok 1.4 to the Ipod Touch no longer appears to work; the Ipod fails to recognize any music transferred onto it (standard "No Music - you can buy music at Itunes" error screen), so I presume this is a libgpod/hash error. I have the FirewireGuid properly set in the .../Device/SysInfo file, as I always have.
Every time I use the Amarok Ipod "connect" function (which runs ipod-touch-mount) it tells me no valid Itunes db was found, and asks to initialize the db. I can then transfer music to the Ipod, and successfully disconnect, but it's not recognized on the Ipod after a respring or reboot.
I've tried RhythmBox and gtkpod briefly with no luck either.
Relevant installed packages:
Code:
ii amarok14 2:1.4.10-0ubuntu3~ppa5 Amarok 1.4 series
ii amarok14-common 2:1.4.10-0ubuntu3~ppa5 architecture independent files for Amarok
[Code]....
Edit: a little more info: after I let Amarok initialize the Ipod Touch and transfer a song to it, the iTunes.db that gets created on the Ipod is 0 bytes long. I presume this is the source of the problem, and indicates something is going wrong with libgpod's creation/editing of the db.
what I should do from here? I've tried removing the DB by hand, but it makes no difference - the subsequent operation to initialize the db results in the same 0-byte file.
View 3 Replies
ADVERTISEMENT
May 24, 2010
when I plug in my iPod touch 3g I do get an icon for it on the desktop.However, when I open Rhythmbox, or Amarok, or Banshee or anything else, there is no icon for the iPod touch.I have tried the 'scan removable media' within Rhythmbox and it asks me to initialize a new iPod. Initializing results in the iPod making an audible bleep as if it were charging but does not result in its icon appearing in Rhythmbox. Also, I have been able to upload snapshots from the iPod onto my computer but what I need is audio syncing with the iPod.
View 5 Replies
View Related
Mar 10, 2011
I downloaded Amarok 2.4 today and am attempting to use it to sync my music to my iPod Touch. .mp3 files transfer perfectly, but for some reason any .m4a file is being reassigned a .mp4 extension and being relegated to the 'Video' app on the iPod. I do realise that an .m4a is just .aac audio in an mp4 wrapper, why Amarok and/or the iPod is deciding to treat them like a video instead? It's doing it both to my own ffmpeg-encouded .m4as as well as unprotected .m4as from the iTunes Store (relics of my time on Windows). Anyone know what might be going on with this? Ubuntu 10.10 NE, Amarok 2.4, iPod Touch 2G (... possibly 3G, but I'm pretty sure it's a 2G) running firmware 4.2.1
View 2 Replies
View Related
Jan 13, 2010
Its a dell e510 with about a gig of ram. I'm struggling to get my ipod touch working with the gtkpod ipod manager. At this point my ipod shows on my desktop when i connect it via usb. I cannot set up the repository for it in gtkpod because i dont know the location its mounting to. if its mounting at all. so my question is. how can i tell where my ipod is being mounted? I dont have a clue what to look for in the terminal results for "df -a"
But this is what i get:
Code:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda1 152357444 65577992 79040140 46% /
proc 0 0 0 - /proc
none 0 0 0 - /sys
[Code]...
Edit : Itouch = first generation 8gb Edit 2: I would like to create a sticky thread that helps new users answer questions about ipods. Will a moderator please let me know what i should include in their opinion? ex. using wine to run itunes, gtkpod and how to set it up, using mm players like banshee and songbird... what version of ubuntu works best with the ipods.
View 7 Replies
View Related
Nov 29, 2010
After finally being able to mount my iPod Touch (8gb, jailbroken on iOS 4.0) with iFuse, I can only sync using gtkpod. This a horrible music syncing application and deserves to be punched in the forehead. I was wondering how to get Banshee to recognise my iPod. I'm on 11.3.
View 4 Replies
View Related
May 18, 2010
I am running openSUSE 11.2. I decided to give it a try on KDE 4.4 and, after the upgrade, I've noticed an inconvenience regarding Amarok. It is no longer able to play from the web. I've captured a log (amarok --debug) from the event, but I don't know where to post the file.
View 9 Replies
View Related
Mar 24, 2010
I've been trying to get my iPod touch (8GB, jailbroken) to connect with gtkpod iPod manager. But whenever I try to load the iPod I get this message.
Quote:
iPod Database Import Failed: 'illegal seek offset 0 (length 4) in file '/media/ipod/test/iPod_Control/iTunes/iTunesDB'.'
View 3 Replies
View Related
Jan 9, 2011
I've been trying things all day. My iPod was working on 10.04 but after the upgrade it has stopped working. When I plug it in it asks me if I want to launch it in Shotwell and Rhythmbox.Shotwell and it shows none of the pictures which are on it.Rhythmbox displays the iPod icon for it but shows no songs.Banshee shows the iPod, shows that 11.3 gigs of it has been used but does not see it as usable media.
View 6 Replies
View Related
May 3, 2010
i upgraded to lucid, but now my video has stopped working... videos and iplayer work fine. the problem is with any videos (mp4, flv) opened in vlc or mplayer. i can hear sound fine but the screen is black. the same happens in skype. i followed the comprehensive guide and did all the steps, but no joy.
View 3 Replies
View Related
Jul 19, 2010
My sound in Lucid was working fine (for months), and then, for no obvious reason, it stopped working today. I get no sound from any application. I have no idea what could have changed on my system to cause this.When I re-boot Lucid, the login sound plays, and sound works briefly, but it always stops eventually after I login.I am overwhelmed by the large number of different Ubuntu sound problem fixes
View 9 Replies
View Related
Jan 3, 2010
I've tried every way possible to jailbreak the iphone's 3.1.2 firmware with windows running inside of VirtualBox. I kept a blog of the whole process here [URL]...
View 5 Replies
View Related
May 3, 2010
I just recently installed openSUSE 11.2 (KDE desktop). Like some others, I'm having trouble getting apps working with my iPod Touch. So far, I've tried two apps: amarok and gtkpod. Neither one seems to detect my iPod. When I connect the iPod to my computer, I get a popup indicating that some type of camera has been connected. Also, when I look at dmesg's output, I see stuff related to the iPod (Apple info) and no errors as far as I can tell. But I don't see any device file for it (either under /dev or /media).
View 7 Replies
View Related
Feb 22, 2011
I know there are a few threads on this already, but I don't think they apply to this type model specifically. This link says that the libgpod is not yet current with the hardware.
It also says that it works with iPod Touch 4G's with a lower OS (ex. 4.0.1). Mine came with 4.1, but even after jailbreaking, I cannot get it to sync music.
If I were to downgrade the OS (is this even advisable for this model), would I then be able to sync music in Ubuntu?
View 1 Replies
View Related
Jan 18, 2010
connecting my ipod touch (Version 1.1.5). When I plug the ipod in, ubuntu doesnt recognize it at all, not even as a camera. It will however charge it up. Ive tried Hipo and Amarok but neither of them do anything as well. I am running Ubuntu 9.10.
View 4 Replies
View Related
Aug 11, 2010
I'm running (K)ubuntu 10.04 side-by-side with Windows 7 (Wubi install) and have been having trouble from the word go trying to get my ipod working with it. I've already managed to jailbreak it with Spirit in Windows in hopes that it would get the iPod libs to work but to no avail. I've downloaded just about every result I could find by searching for "ipod" in Synaptic as well as a few other libraries that I've found while searching the forums for a solution to my problem. I have both Banshee and RhythmBox on my machine and Bash can detect the device but it won't mount and to the best of my knowledge not a single program can see anything other than a folder labeled "iPod" in my "media" drive and even this only recently occurred. For what it's worth, I've downloaded the ipod-convenience package and this is the code that resulted when I tried to mount via Konsole:
[code]...
this is after I've added myself to the 'fuse' group and rebooted the computer.
View 2 Replies
View Related
Aug 12, 2010
Any who, like the title says if i ssh into my ipod on to ubuntu will the titles be screwed up?
I have a lot of songs there and i dont want to have to re write over 1000 song titles.
my ipod is jailbroken. i have firmware 4.0 and i think i am running Ubuntu Netbook remix 10.04 and i use rythmbox.
so can it b done
View 2 Replies
View Related
Oct 9, 2010
I just got a 4th generation iPod Touch today. I plug it in to my laptop (Ubuntu 10.04), it recognizes it as a photo storage but it will not recognize it in Rhythmbox or Banshee. Therefore I cannot get any files on to it. Although when I plug it in and open Rhythmbox it makes a little noise.
I have tried installing libimobiledevice, ifuse and tried with gtkpod (basically I've read a lot of stuff about getting it to work) all to no avail. I also plugged it into Windows Vista to get it started as well as transferred a song from iTunes 10 to it, and it still doesn't do much when on my laptop.
It seems to not be mounted in the proper place for gtkpod and no fixes seemed to work. For using ifuse it does not seem to recognize that it is plugged in. I have updated all the libimobiledevice packages and still nothing.
View 7 Replies
View Related
May 17, 2011
I believe I have all the necessary files, but nothing happens when I plug it in. I had it working with gtkpod in ubuntu 10.10. Any ideas? I have itunes in windows, but hate booting into it to do work. (I only use it for occasional gaming)
View 1 Replies
View Related
Oct 11, 2010
I do not manage to get my my ipod touch 4g recognized by ubuntu 10.04. First time I tried, it was recognized as a camera and not as a media player. I tried to install a few other packages. Now it is not recognized at all....
I followed guidelines on the forum and installed libimobiledevice, ifuse, usbmuxd and libplist. Note I unlock my ipod before connecting it.
Here is what I get with ideviceinfo
jean-francois@Sony:~$ ideviceinfo
usbmuxd_get_device_list: error opening socket!
No device found, is it plugged in?
I see a lot of post related to new ipod touch 4g installation but I think I screwed up somewhere in my configuration since the ipod is not recognized at all.
View 4 Replies
View Related
Aug 13, 2011
i have a 3g ipod touch and i need to know how to get it to work in opensuse 11.4 running kde desktop.
View 2 Replies
View Related
Jan 19, 2010
I just upgraded from 8.10 to 9.10 and now my sound doesn't work (note: I don't know if sound was working on 9.4, since I only ran that long enough to upgrade again) Sound was working just fine under 8.10, and I just tried booting up with a livecd I had handy, which is 8.04.1 and sound worked right off the bat, no problems.I've checked the volumes on everything, including the master volume which WAS initially set to 0.Sadly, turning that up did nothing.The Pulseaudio Volume Control app seems to think nothing's wrong- it's picking up the sound from various applications just fine, the volumes are all on, etc. (aplay lists my soundcard fine:
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: VT1708B Analog [VT1708B Analog]
Subdevices: 2/2
[code]....
View 2 Replies
View Related
Jan 20, 2011
The problem i'm having is that my microphone stopped working after the upgrade to 10.10. Ubuntu doesn't seen any sort of input device any more, no line-in , no mic ( front as back ).Own on to the specs of my machine:It has a realtek ALC861-VD audio chip.2 mic jacks, 1 line-in , 2 out (front and back) and a coaxial port thing .The os is a upgraded from 10.04 to 10.10 and everything except this and my tv card sound works.I have pulse audio tools and alsa mixer ( although it broke during upgrade ) installed.alsa info is available upon request, so is any other info may you need it.
View 7 Replies
View Related
Aug 17, 2010
I haven't hooked my ipod up to a computer since I started using ubuntu in June of 2008, and my playlists are getting a bit dusty. I have a 5th generation ipod. Will I have better luck with amarok or rhythmbox, or does it not matter?
View 5 Replies
View Related
May 2, 2010
I am curious if it is possible to manage apps on an iPod Touch with Nautilus or any media-oriented program on Ubuntu 10.04. I have seen several blogs stating that users have been able to manage their apps using Nautilus, but I am unsure if this is true or not.
View 1 Replies
View Related
May 26, 2010
I have an iPod Touch 2nd Gen with 3.1.3, Ubuntu 10.04, and the most up to date software, and my iPod doesn't appear in Rhythmbox. It shows up with Nautilus, so I know its being read.
View 8 Replies
View Related
Jul 4, 2010
I'm running Lucid and so far I've been really pleased with how easy it is to access my ipod. My only problem is transferring music I purchased from the itunes store from my ipod touch to my ubuntu box. Neither Rhythmbox nor gtkpod shows that I have purchased music. If I browse through my ipod using Nautilus I can find my purchases but they have numbers for names and their metadata is in plist separate plist files.
The files aren't DRM'ed. If i hover my mouse over any of them in Nautilus, they play fine. Is there an easier way of transferring them than copying them and tagging each file individually?
View 3 Replies
View Related
Aug 15, 2010
I am on Ubuntu 9.10 and Will soon buy a ipod touch 4g. I would like to if there are any applications that could allow transferring songs to the device from Ubuntu?
View 1 Replies
View Related
Sep 30, 2010
How can I mount an iPod touch in Ubuntu with access to the root and not only the media folder?
I tried to do things with ifuse and it didn't work or I didn't understand.
I succeeded to mount my iPod with ifuse without root access in /home/user/iPod but now I would like to delete it but I don't know how.
So how can I mount my iPod touch with root access (something with afc2) and to delete the unwanted one that I made ifuse?
View 1 Replies
View Related
Oct 2, 2010
I recently found that I can sync my music to my iPod without iTunes/Windows. I tried using Rhythmbox and it seemed to work. That was, until I tried playing the album I added. It just skips through the album.
View 3 Replies
View Related
Oct 15, 2010
I recently upgraded to kubuntu 10.10 and now I can't play songs and sync my ipod outside of gnome. Before the upgrade I was able to access the ipod using rhythm box, it wouldn't be detected at first but if I would click music and then import folder and then click ipod touch under places rhythm box would recognise it and it would be mounted at /home/linux/.gvfs/iPod touch. But now unlike before on kubuntu 10.04, when I plug in my ipod it is actually recognised by the device notifier, but it only recognises it as a camera it has no access to the rest of the file system where the music is located, and their is no eject button in the device notifier to unmount. And because of this I can't mount gvfs unless I unplug the ipod, logout, and log back in into gnome. I tried mounting with ifuse before on 10.04 but it didn't work right, now when i try it in kde I get a whole new error message.
linux@linux:~$ ifuse /mnt/ipod/
No device found, is it connected? If it is make sure that your user has permissions to access the raw usb device. If you're still having issues try unplugging the device and reconnecting it.
I tried
umount camera:/Apple iPod Touch (PTP mode)@usb:001,005/
But that just gave me
bash: syntax error near unexpected token `('
I didn't think that command would work but I tried it because I have no idea where the hell the ipod is mounted or if it's even mounted at all. Is their any way to keep kde from detecting my ipod touch? Or anything I can do in the terminal so I can use my ipod with gtkpod or rhythmbox while in kde.
View 4 Replies
View Related
