Ubuntu :: 10.04 Gets To Desktop - Black Screen And Cannot Do Anything
Jul 29, 2010
I have just loaded Ubuntu 10.04 onto a hard drive and then booted using my laptop and it boots all fine and I get to the desktop. After I get to the desktop in around 10-20 seconds the screen suddenly goes black and the mouse disappears and I can't do anything. The fan still goes but thats about it, I have to hard shut down and load up again but it just keeps happening. Not sure what to do next?
Its an old Toshiba Satellite laptop
1.6 ghz processor
1gb RAM
View 8 Replies
ADVERTISEMENT
Jun 20, 2010
The computer was working fine last night, when I woke up this morning (I leave it on) it was making strange noises through the speakers and I had a blank screen, restarted a few times had some page full of code and wouldn't move on from there, I went out came back started it up and it did everything normally except instead of a desktop I had a black screen, however strangely enough when I press the power button on the PC a shut down menu comes up, and the mouse works and I can select from the options. I am on an Nvidia ION tho. How do I boot into a safe mode as such? as at the moment I'm using a ubuntu live CD to read the forums!
On the GRUB menu, seclect "Ubuntu (recovery mode)" (not exact wording). You'll get scrolling boot messages until you get to a screen with a grey box and some options. Use the arrow keys to select "x failsafe graphics mode" or something of the like. Press enter and you'll probably get a message that your card can't be detected or something. Press okay and continue. Your screen will be messed up, but you'll be in. It probably isn't the same problem, as you don't have an ATI card and can see a shutdown menu, but good Luck!
How do you bring up the GRUB menu? My PC isnt dual booted so I never see any menus at all, I thought all I had to do was press F8 during boot up? No, F8 is Windows. Hold down shift when booting to see the menu. Downloaded & Installed the 10.6 driver and everything is working fine. Unminimizing apps works much faster with this driver . However, /usr/bin/aticonfig --initial results in
Code:
Found fglrx primary device section
Using /etc/X11/xorg.conf
Saved back-up to /etc/X11/xorg.conf.fglrx-2
/usr/bin/aticonfig: Writing to '/etc/X11/xorg.conf' failed. Bad file descriptor.
Right now I've tried what "jxtreme" suggested on quote nr2 however when I go into recovery mode I get a load of code scrolling through the screen as its supposed to but I never get any box with options as he says, it just gets to a point where there's a small white cursor flashing at me half way down the screen and it stays there...
View 9 Replies
View Related
Nov 5, 2010
This morning I did some recommended updates for Lucid with update manager. This afternoon at start up I get a black screen after booting. I can hear the sound effect for the login, and if I key in my password, I hear the Ubuntu signature tune, i.e. it is booting and starting up. But my screen is just black with the arrow-shaped pointer, which I can move across the screen with the mouse. Other than that, nothin
View 9 Replies
View Related
Sep 22, 2010
In ubuntu 10.04 I have compiz installed and when I try to rotate the cube or simply change desktops screen goes black but not entirely, I mean I can still see the cube. This happens only during the change of desktops. Its very annoying,it doesn't create trouble but I cant see the cube effect.
View 9 Replies
View Related
Apr 5, 2011
ive just installed Xubuntu Desktop on to my computer, it runs fine, everything loads and so on. but after i log on the bottom 3rd of my screen is completely black
View 1 Replies
View Related
May 4, 2011
I want to be able to run multiple desktop sessions, but when I goto the next session terminal and type startx -- :2 the screen just goes all black.
View 4 Replies
View Related
Mar 19, 2010
whenever i open my kubuntu desktop it brings a black screen. the pointer of the mouse is active but i cannot see anything.but my gnome desktop works well.what might be wrong?
View 5 Replies
View Related
May 20, 2010
I have a problem after installing Debian and running it on my machine. Instead of taking me to a splash login screen, it instead remains a black screen like a console where I type in my username and password, and it remains in this black command line mode beginning ben@ben-desktop:~$. Like it does in a terminal. What can I do to resolve this? This is completely new to me and hasn't happened to me in Ubuntu or Mint. I am familiar with using the terminal for the odd task but obviously I can't use it like this without a visible desktop.
View 14 Replies
View Related
Sep 14, 2010
Trying to install Ubuntu 10.04 desktop (amd64) on this brand new system:
I connected the Dell ST2410 24" Full HD Widescreen LCD to the HDMI port on the ATI card and Windows 7 boots up just fine.
So then I put in the "ubuntu-10.04-desktop-amd64.iso" CD in drive and reboot the system. I see the Ubuntu logo with the dots for a while and then the LCD goes black. The LCD reports that there is no signal from the system. The power light in front of the LCD goes from white to amber. The keyboard stops responding.
I power off everything, remove the Ubuntu CD and reboot the system and it works fine again with Windows 7.
The CD has no problems. At boot time, I checked it for defects and it reports no errors. At boot time, I used this same CD to check the system for memory errors. No memory errors. I used the same CD to install Ubuntu on other systems and had no problems.
The 16X DVDRW Drive has no problems. In Windows 7 it can play CDs and DVDs.
View 5 Replies
View Related
Nov 8, 2010
I recently did a clean install to upgrade to 10.10 and I also got a 2nd monitor recently after upgrading. I want to be able to connect remotely to my desktop like I used to from my phone, but when I connect I get a black screen the size of my full desktop(both monitors) and I can move the mouse/type.
View 2 Replies
View Related
Jan 13, 2011
So I updated my software using Yast. One of the updates failed to install. I rebooted and then was in black screen hell with the following information:
Neither the variables MOUSEDEVICE and MOUSETYPE nor the variable GPM_PARAM is set in /etc/sysconfig/mouse
Run 'yast mouse' to set up gpm
Starting hpssd: Checking/updating CPU microcode unused
Starting nfsboot (sm-notify) done
done
Loading keymap i386/qwert/uk.map.gz done
Loading compose table winkeys shiftctrl latin1.add done
Start Unicode mode done
Starting hotkey-setup done
[OK]
Starting cupsd done
Starting powersaved: ###################################
# ACPI system but acpid not running. #
# Start acpid first, then restart powersaved! #
############################################### skipped
Mount SMB/ CIFS File Systems unused
Executing suseRegister (looking for new update channels): skipped
Starting SSH daemon done
Starting ypbind.....................No domainname set skipped
Starting service automounter ("files nis" does not provide any mounts) skipped
Starting Firewall Initialization (phase 2 of 2) SuSEfirewallZ: Warning: ip6tables does not support state matching. Extended IPu6 support disabled.
SuSEfirewallz: Warning: no interface active done
Master Resource Control: runlevel 3 has been reached
Skipped services in runlevel 3: nfs gpm microcode powersaved smbfs suseRegister ypbind autofs
Welcome to SUSE Linux Enterprise Desktop 10 SP1 (i586) - Kernel 2.6.16.54-0.2.5-default (tty1).
linux-bvuz login: Starting ZENworks Management Daemon^[^[^[
I don't have a CD drive attached to the HP 2133.
View 5 Replies
View Related
Mar 6, 2010
I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies
View Related
Feb 10, 2010
I get a black screen whether I use Ubuntu's driver or ATI's driver, but when I use the default it works fine without an desktop effects. Catalyst installed without any errors.
View 8 Replies
View Related
Jun 2, 2011
I install UBUNTU 1104 on HP Desktop PC, but now it doesnt start. Just appears a Black screen with this msg: Error Code = 1001.
I want reinstall but PC is not reading CD, But the CD drive is working.
I install UBUNTU 11 in other 6 PCs, and work fine.
PC inf.: HP Compaq dc5800 Small Form Factor
I never install Windows on this PC. The original OS was UBUNTU 9.04 and updates.
View 2 Replies
View Related
Jul 20, 2009
I cannot install FC11 or FC10 on my Dell XPS One/A2420 machine. Every time I tried to install the Linux operating system, the screen goes black and the computer goes no response. It seems to have something to do with the video card--Intel GMA X4500HD Graphics.
View 1 Replies
View Related
Jan 18, 2010
openSUSE 11.2 i586, ASUS P3-P5G43 Rev. R1.04G Intel Core2 Duo CPU E8400@3.00GHz, Intel G45/G43 Chipset The Problem: The screen is for the WSXGA+ (1680x1050) standard. This resolution was detected, at the initial install and later with sax2. It shows the desktop with a 1 inch wide black area along the right border of the screen and that is exactly what is missing at the left border (i.e. invisible). It is like the desktop is shifted to the left of the screen. As far as it is visible the image is crisp and clean. Lowering the resolution to 1280x960 works ok, but the aspect ratio is no longer correct. I have checked the archives and found Intel integrated graphics - openSUSE Forums but trying different hints from the thread did not help.
[Code]...
View 8 Replies
View Related
Feb 21, 2010
Few days after installing Ubunto 9.10, during installation of gstreamer, the installation utility got stuck, and with it the whole desktop icons. (I think the gstreamer has nothing to do with it). When I tried to execute some icon, like the terminal, it will not open. After restarting the computer, I get a tty1 login terminal and not the graphical one (tty7). When pressing Ctrl+Alt+F7, nothing happens. It switches to a black screen. "sudo startx", gives some error log. I already reinstalled the X-server, ubuntu desktop and other stuff.
What can be the problem? Is it related to my video card (nvidia 7600 GT)? I didn't install any nvidia specific driver. This happened to me earlier and I reinstalled Ubunto. I think maybe I should move to some other distribution.
View 1 Replies
View Related
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
Dec 8, 2010
I turned on my Acer laptop and during bootup it seemed normal. After it passed the blue Acer logo, all I could see is a black screen and a black cursor outlined in white in the shape of an X. Thinking it would be a one time thing, I turned it off again.it still was a black screen.
View 14 Replies
View Related
Oct 1, 2010
Alright guys. I need to find a way to enable a black screen screensaver (or turn off the monitor, or something to avoid burn in) while the machine is sitting at the login screen and completely turn off the ability for the computer to sleep. how I can accomplish that?
View 1 Replies
View Related
Jun 25, 2011
I have recently installed 11.04 natty on Intel Core i3-2100 3.1 GHZ using its own graphic accelerator. When the screen is idle for a long time, more than 1 hour, I get a black screen with the mouse arrow but nothing else. the mouse moves the cursor and Ctl+Alt+F1 does work. How to fix this problem?
View 4 Replies
View Related
Jul 21, 2011
I installed Ubuntu 11.04 today as the main OS on my laptop.I had deleted my XP partition, and repartitioned it according to a guide I had found. (http:url)......Basically it was setup like this: 500mb ext2 primary partition, has the grub folder, I believe this is either the '/' partition, or the '/boot' partition 2gb swap space logical partition
10gb ext4 logical partition -- this is either the '/' or the '/boot', it contains the 'bin,boot,cdrom,dev' etc folders 243gb (the rest of my hard drive, with the exception of a partition that contains documents and files from my XP OS, formatted to NTFS) ext4, this is the one that has all my desktop/documents/etc folders.After Ubuntu was done installing, I had some message pop up about installing an ATI proprietary driver for my ATI graphics card (an ATI Radeon HD 4330, I believe, I may have messed that number up). I installed it and rebooted, no problem.
Next, I had another update window pop up with 198 items checked and ready to download and install. I went through all of this, and rebooted, again, no problem.Next thing I did was install some apps that were essential for me to have to use for my work (an ide, chat programs, etc). No problem with any of that.Last thing to install was the OSE Virtualbox, and then I installed WindowsXP Pro and Windows Vista Business, then installed the guest addition addon for VB. This all worked without any issues whatsoever.
Time goes on, and I notice my computer is heating up much more than (seemingly) normal. I begin to wonder if its my graphics card. So I shut down the computer and let it cool down. Reboot, and no problem, still working fine.Then I opened a couple of apps and tried a simple game (can't remember the name) I believe it was a simple 3d topdown, as I wanted to test my graphics card. This is where things seemed to start to go wrong. My laptop began hanging, not even allowing me to access the terminal via ctrl+alt+f2. The screen flashed and I saw the blue/green/grey fuzz that I get when the graphics card is starting to heat up too much. Then everything hangs and I can't do anything at all, including move the mouse. I did a hard reboot (I believe this is what you call pulling the plug/pressing the power button, correct me if I'm wrong). I then rebooted, saw a chkdisk, then it booted seemingly normal, but it hung right after the purple screen after the grub screen.
This is pretty much where I'm at right now. I strongly suspect the fault is with the ATI drivers, but have been completely unsuccessful in my attempts to fix it. I've googled just about everything I could think of, along with searching these forums. I've tried just about everything listed in the forums, but to no avail.I've tried the commands that are supposed to purge the ati drivers, but all I get are errors that say they can't remove the 'virtual drivers'.
Right now I'm booting off a live cd, so I know the computer still works fine, just not my actual installed OS. I'd really like to get the issue resolved without having to reinstall, as it took quite awhile just to get it usable in the first place, but this has already taken so much time, I may just resort to that if we can't solve it any other way. Got too much work to catch up on as it is.As a re-instated note, perhaps if you have any tips, but not particularly about fixing the OS, my laptop (I'm strongly guessing my graphics card) is heating up much more than normal, compared to that when XP was installed. Is this more than likely just a driver issue, as is the rest of it? Also, I did have Compiz installed, though I didn't choose for it to be installed, I believe it came pre-installed. I've heard it could cause some issues, though I have no idea as to the validity or relation to this particular issue.
Edit:
I just remembered while searching for a solution, I found a post somewhere that said something about the information not being sent to the monitor from the graphics card properly, thus no desktop. I'm guessing that'd still fall under the driver issues, but again, I'm unsure. I would think that wouldn't be entirely true anyway, since I can still see my mouse fine, just no desktop, only a black screen.
View 1 Replies
View Related
Nov 30, 2010
I have Ubuntu 10.04 running kernel .26 installed on my Dell Dimension 2350 with 512mb of memory. The problem I have been having is, When I am using the computer mostly Internet stuff for no reason the monitor will go black then on the screen it will be at a terminal screen, kind of like when you start up the computer, I don't remember what is all on it but the last thing in the list was: checking battery state: OK after that the screen will flash in multiple colors and then it goes into a loop of just black screen than a colorful flash and back over to a black screen. the only way I can fix that is by holding down the power button. this will happen mostly on face-book on the games and just on the profile page, but it does happen just checking my gmail or play solitaire it does this around 4-8 times a day.
View 3 Replies
View Related
May 16, 2011
I've a problem with my ubuntu 10.04 suddenly when I opened my laptop and after I've entered my password then I redirected to a black screen and then to the same screen again and so on what I can do
View 9 Replies
View Related
Jul 4, 2010
out of no where it seems ubuntu no longer wants to cooperate when suspending/hibernating. the screen will just turn to a black screen without shutting down. each time i have to maually power down my laptop.
View 1 Replies
View Related
May 27, 2011
'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
View 4 Replies
View Related
Jun 1, 2010
After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
View 2 Replies
View Related
Oct 9, 2010
I'm trying to test out using xubuntu 10.04 on my one computer and keep getting a black/blank screen after selecting the 'try' menu option.Is there a way to fix this?I have tried some of settings via F6 with no luck.
FYI -The CD works fine as I have tested it on other machines.The version I am trying is xubuntu x86 (although I have tried ubuntu 10.04 x86 with similar results).I can Alt+Ctrl+F1 fine and get to the cmd prompt
View 1 Replies
View Related
Jan 25, 2011
This obnoxious bar has just appeared in Smplayer at the top of the screen. It stays there even when I go full screen. Now full screen isn't full screen and there are black edges on both sides of the screen. I have not be able to figure out how to hide it. I do not need or want this onscreen display. How can I configure Smplayer to make this go away? How can I get my 16:9 full screen aspect ratio back? I have done nothing to mplayer or smplayer as far as editing any or changing any configuration files. I tried several videos and it displays on all of them. It was not there last time I used Smplayer.
View 9 Replies
View Related
Feb 5, 2011
I have openSUSE 11.3 with an nvidia card connected with two monitors. In the past I used xinerama which was ok, but now I need to have two separate desktops, one on each screen. I set the nvidia driver with x screen, and now one screen works perfect and the other only shows a black screen. When I move the mouse over the black screen, the mouse pointer turns into an X, but moves correctly, which seems to me that the problem is that I need to set the second desktop to that screen. I looked on forums on how to do so, and no luck.
View 1 Replies
View Related
