I have installed Ubuntu Server 10.04 on a Dell pc without issue, but on reboot or startup from being off it doesn't load the os. It flashes error: no such disk then leaves me a blank screen with a flashing cursor. For some reason it's not seeing the drive.
View 4 RepliesI run a dual boot Windows / Lucid on my Acer Aspire 5740-6378 laptop. I was trying to fix a problem with my backlight per a help forum on the subject and I screwed up a boot command. I rebooted and the purple Ubuntu screen goes to boxes and a black screen with only my number lock light flashing. I looked under the edit command option at boot up and this is the code that I get;
linux/boot/vmlinuz-2.6.32-24-Generic root= uuid=f8430443-1824-4965-91c8-2760449428b3 ro no modeset acpi_backlight=vendor quiet splashac pi_osi=Linux
I know that this is the problem, because I recognize the code that I entered. I would love to continue to use Ubuntu, so please help me figure out what I need to do on a command line when I boot up to fix it.
I've just tried following this guide to install the unity-place-filesearch lens to allow unity to index files from my disk as well as previous;y accessed files. I set loaded it using setsid unity then added some basic folders to the newly created ~/.filesearch.cfg such as ~/Desktop, ~/Music, ~/Videos etc. removed ~/ and turned down the indexing depth to 2. However the Lens works great as long as I've run setsid unity manually during the session, but I've I restart it's gone again and I only seem to be able to access files from my recent history. Here's a list of running processes immediately after a reboot:
[Code]....
I installed Fedora 13 to sdb7 and installed Grub to root all went well on install. But when I reboot it stops at Loading Partition.
View 12 Replies View RelatedAn error occurred during the filesystem check. Dropping you to the shell; the system will reboot when you leave the shell.
Warning -- SELinux is active
Disabling security enforcement for system recovery
Run 'setenforce 1' to reenable
it stuck after loading. should got login window. instead it show me a blank page and a blinking courser i can only press ctrl+alt+del it will reboot my laptop n stuck after the loading process
View 2 Replies View RelatedInstalled 11.4 on a machine with two SATA drives which had previously been running Windows 2003. I deleted the Windows partitions and created a new partition scheme: Swap, root and one additional partition on the first disk, one large partition on the second disk. Install runs fine but upon reboot I get "Error loading operating system". Booting off a Windows floppy and running FDisk shows that the root partition is marked as active.
View 7 Replies View RelatedI just installed Fedora 13 x85_64 on Intel s45sf server board with hardware raid and 8Gb memory. After installation and reboot I got the message: Error Loading Operating System I tried installation with no raid I doesn't work.
View 1 Replies View RelatedHave a McFee Server; SuperMicro 370der, P3 Dual 1 ghz, 256 gig ram, 2 18.2 gig scsi(lvd) drives.Have tried loading 4 versions of ubuntu to my server and get hung on the agp chipset. don't know where to go to get it to work. Tried 6.0 to 9.10.
View 2 Replies View RelatedI have one server with Jboss and Tomcat installed, I have to start these servers manually everytime I do reboot the server.How I could do to start Jboss and Tomcat automatically, when I do reboot the server?
View 1 Replies View RelatedMy sites on the server are loading very slow, though my server load is under 1.00.What can be the problem, when ever i restart httpd the sites starts to load instantly.
View 14 Replies View RelatedI see this site: [url]
That explain how to reboot a freeze system by remote with only make a ping in other machine.
Well I want to know if that module is compatible with my centos 5 because it appear that run in kernel 2.6.X. is compatible ?
If I make a cronjob to reboot a server every 3 days at like 2am? This way it will free up ram, etc and cause less problems right? I know a guy that is doing this, and I'm trying to convince him otherwise.
View 5 Replies View RelatedI've a folder named "lynx" in my desktop . It contains ebooks - pdfs,chms etc . The problem is sometimes when i open the folder in nautilus , the folder keep loading forever and sometimes it shows two or three files and keep on loading . But at some other times , folder contents are displayed just as any other folder(i.e normal ).
View 5 Replies View RelatedUbuntu 10.04 not loading. Sticks at GRUB Loading message.
Read the other threads re OS not loading and GRUB. The talk about code goes over my head.
Local techie says the hardware is good. Tried reloading Ubuntu from CD. Tried loading the unmentionable OS.
Tried using Spotmau Powersuite.
I cannot make php 5.3.3 load the zend guard loader:Extracted the tar.gz, moved the .so file in the right place, edited php.ini in the [php] section, rebooted the server and php -v says I don't have the optimiser.Quote:
[root@intraweb ~]# updatedb; locate php.ini
/etc/php.ini
[root@intraweb ~]# cat /etc/php.ini | grep -i zend | grep -v ";"
[code]....
I have a linux server that I cannot really configure. I would like to upload via web page a quite big file ( ~100MB) but the server disconnect after 10 min. Is there any kind of software that can establish the connection without getting into server cfg details? If not what can cause this disconnection?What I need a simple web site when 50 ppl can upload short movies and then watch them. It needs to run localy (no .....)
View 2 Replies View RelatedI am trying to set up a raid set on my computer but I have run into a small problem. it seems that the sata_promise driver is not loaded until after the md: bind has been performed. This means that my raidset will be missing some of it's discs and fail to start.
Is there any way to have the sata_promise drivers load earlier in the boot process?(more details can be found in my other post)
I upgraded my Ubuntu 8.04 LTS server to 10.04 LTS - rebooted and things ran good. I knew I had a few problems, but DHCP and DNS were booting up and working fine for me.I went to take a look at Webmin, but apparently that's been removed from support for Ubuntu 10.04 - so I thought, I'll use eBox. I realized that Ebox didn't have the network module turned on, so I tried to turn it on. I found out the installation was missing scriptaculous, so I got that and installed that and then turned on the network module.I then rebooted the machine - and now nothing. It hangs when I get to the load for Apache. I would like to disable the network module for eBox, but can't find documentation for how to do that from the command line - which I have to use because the damn box won't boot and I'm running from a Live CD.
View 4 Replies View RelatedTry to load my system today and nothing come up, only the terminal window. Whatever I type in is working, like now I type in the terminal firefox and it is how I ended up here. Try to type thunderbird in the terminal and my mail server started no problem. But nothing on my screen, don't no where to go from here.
View 9 Replies View RelatedHave a McFee Server; SuperMicro 370der, P3 Dual 1 ghz, 256 gig ram, 2 18.2 gig scsi(lvd) drives. Have tried loading 4 versions of ubuntu to my server and get hung on the agp chipset. don't know where to go to get it to work. Tried 6.0 to 9.10.
View 3 Replies View RelatedI installed Drupal and there is only one site. It I access the website [url] where Drupal is installed I can easily see it functioning properly. But on internet it is not loading properly the colors etc are not visible properly.
Following changes were made to all the sites
Code:
I had recently setup an OpenVPN server on x64 10.04 via the guide found at: [url]
Everything was working perfectly, all clients were able to connect etc.
Today I needed to reboot for a completely unrelated issue - only to find that upon logging in, openVPN was no longer running.
When I tried to execute 'sudo /etc/init.d/openvpn start' I'm presented with an interesting message...
This *used* to say Server. I've double checked all the configs and scripts used in the config and they all check out OK. I purged and reinstalled openVPN to no avail...
i've installed 11.04 server on my macmini 3.1 (late 2009) from cd, and it is the only system isntalled (no os x, no windows). It works very well, even netatalk. The problem is, if i reboot the computer ubuntu doesn't start and i've got the blinking folder with question mark after ~30 seconds.
View 1 Replies View RelatedI installed 11.04 server and had samba share /tmp (as advised by the server pdf doc) shared to my windows 7 laptop, which was all well and good, so copied some files to it and rebooted the server, and they had been removed.i guess i shouldnt have put anything in /tmp as i presume this is cleared on reboot, so why did the documentation advise to create /tmp share?
View 1 Replies View RelatedI am trying to set up my Apache server with FastCGI as the CGI engine. It will be mostly running PHP, but I may add Perl or something else later. I started from a completely fresh install of Ubuntu 11.04 with every update available. I used the install CD to install a LAMP server as part of the system install.I am using the tutorial at URL...to add the FastCGI functionality. I am having some problems with getting everything to work.The first problem was that apache2-suexec-custom wouldn't accept a different document root. I fixed that by compiling apache2-suexec from source with the document root changed to the correct path.
The next problem is that every php page I load throws a 500 error. Apache's error logs show that FastCGI isn't returning the page data correctly to Apache.
I managed to successfully install LAMP on my VPS and proceeded to install Wordpress only to run into an odd error.When I click on index.php, it starts to load but nothing happens.
The details:
LAMP = CentOS5.5, Apache 2.2.18(compiled from source), MySQL 5.1.57(compiled from source), PHP 5.3.6(from source too) My site: ottomatic.org as you can see in the index of files index.php is what I'm trying to load and if you check phpinfo.php you can see that PHP was installed correctly too. I added an .htaccess file with 644 permissions to my web root directory and that only seemed to produce an error, this is what I put in the .htaccess:
<IfModule mod_rewrite.c>
RewriteEngine On
RewriteBase /
[Code]...
I login to my server and when I open new console I get:
-bash: /etc/profile: Input/output error
-bash: /root/.profile: Input/output error
and nothing is working I tried to reboot or top command but not working also I can't open SFTP the server says The server has rejected the SFTP request.
At first I tried the using the CDROM to install the server but around 8% through it could not talk to the CDROM anymore. I did attempt this a few times including re-seat the CDROM and it stopped at the same point every time. I then used the Mini install and that worked. However, after I rebooted I received the this error.
Gave up waiting for root Common problems:
Boot args (cat /proc/cmdline)
Check rootdelay
Check root
ALERT! /dev/disk/by-uuid/bfaafj88-83ce-4dd2-8c6f-26o9a869eaea does not exists Dropping into shell:
(initranfs)
I then reboot from this point by issuing the reboot command and can then go into the rescue login with networking. I did select reconfigure GRUB and rebooted but same error as above.
System is an old Dell Poweredge 1550
Ubuntu = 9.10 server
Every time I reboot my server, it no longer connects to the internet. It is dual-homed with an internal and an external interface. Both come up. The internal connection works fine. Nothing happens on the external interface. Ifconfig shows that both interfaces are setup correctly. My iptables settings are properly restored. Forwarding is automatically enabled. For some reason packets do not go anywhere on the external interface. This has been true ever since the upgrade to jaunty I think (now running lucid).
Once I restart the external interface it works perfectly (eg ifdown eth1; ifup eth1 or /etc/init.d/networking restart). The problem only occurs after a reboot and only occurs on the external interface.
Here's my /etc/network/interfaces file:
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet static
[Code]...