Ubuntu :: 10.04 Now Freezes On Boot Splash After A Few Reboots?
Apr 30, 2010
Since I know there's a lot of support threads going, I wouldn't ask unless I was really stumped and couldn't google. I'll get right to it.
10.04 fresh installed fine, working, few reboots, all good. Installed Nvidia 195 drivers. Not so good, still works fine, but framerates not as good as the 190 drivers I'd been using with karmic. So I installed nvidia-glx-190 and nvidia-190-modaliases with the nvidia PPA for jaunty. They didn't appear on the restricted drivers list, I rebooted in the hope they would, and now my boot process is as follows.
Boot, met with a blinking _
Goes blank
Another blinking _
Green static appears momentarily, then very fast the Ubuntu splash appears, the white orbs all turn orange, and there it hangs. The splash itself is in the wrong resolution.
Everything is the same as when it was working except it didn't totally freeze at the end. It responds to nothing except the power button (and sometimes not), I can't access a shell or the grub menu at any stage during the boot process like I usually would, and nothing in the boot log seems out of the ordinary.
What should I do? I'm on a LiveCD desktop, got the harddrive mounted.
Macbook pro 4,1, 2GB ram, Core2duo with Nvidia Geforce 8600GT
View 9 Replies
ADVERTISEMENT
Feb 14, 2010
I set up a dual boot on my laptop a few days ago, between Windows XP and Ubuntu 9.10 (installed from Live CD). All the hardware is working fine.
Anyway, SOMEtimes, during the splash screen , the screen turns off (physically turns off) and the hard disk seems to stop. I cant do anything appart from force it to power down.
Yet sometimes, it boots up fine.
I want Ubuntu to work first time EVERY time.
View 3 Replies
View Related
Nov 1, 2010
So I turn on my pc today, select ubuntu studio from GRUB and it freezes during the splash sequence - I hard shut down and the power back on and. nothing. Hard drive light illuminates once then stays off. External HDD powers on. Processor light comes on but no graphics - no manufacturer stuff, no bios entry - nothing.
View 9 Replies
View Related
May 9, 2010
Whenever I select windows 7 from grub it will boot up to the splash screen and then restart.I do NOT have a repair cd.
View 3 Replies
View Related
Apr 17, 2011
I noticed that after making my build in suse studio my system freezes immediately after GRUB ( Normal or Failsafe) boot splash screen. I also noticed that this happens only with the specified kernel below. I'm not sure when using Kernel 2.6.37, one had the same problem. I never used it. The original kernel 2.6.34 had no problems such as the one I have described. My systems has no further problems only that it takes several restarts to go past the "Freeze". Below is a list of my system specs:
openSUSE 11.3
Kernel-pae 2.6.38.2-4.1 from Kernel Stable.
GRUB 0.97-174.1 from openSUSE 11.4
Upstart 0.6.5-33.1
xorg-x11-server 7.6_1.9.3-142.1 from X11:xorg 11.3 repo.
The GRUB from openSUSE 11.4 has been very stable and non-problematic. I will be buying an Intel core i5-2500K in a few months that's why I need the latest kernel and XOrg-X11-server. What could be causing the freezing?
View 6 Replies
View Related
Aug 25, 2010
I'm trying to install 10.04 Ubuntu using a USB drive. I restart the machine and I get the Ubuntu start up screen. I select to install Ubuntu on my hard drive. It does its loading process and brings up the splash screen. The red lights blink for about 10 seconds then stop. Everything freezes: the keyboard, mouse, screen, lights, everything. I can still perform a reboot, but this situation happens everytime I try to load.
Here are some system specs for my computer (edit: these are the correct settings. The settings I have in my sig are not correct. I will change them soon. Sorry about the discrepancy)
Intel Core 2 Quad Q6600 2.40Ghz
Nvidea GeForce 8600 GTS graphics card
Trying to create a Windows 7 dual boot
8GB Memory
I tried a few things with sending noapic and nolapic as parameters to boot and that didn't work as well.
View 9 Replies
View Related
Mar 5, 2010
I am running Ubuntu karmic with Gnome desktop
I rebooted it as a package (GRASS GIS) wouldn't open properly, the splash screeen appeared but it appears to freeze and does not get to the login screen. I have tried to boot in safe mode but pressing ESC at grub doesn't work and Ctrl+Alt+F1 also fails to invoke anything. I can connect remotely via ssh. I have tried to remove Gnome desktop so I can just go straight to commandline but it still brings up the splash screen, I removed desktop using sudo apt-get remove gnome-desktop it said it did.
So why did this happen, last night I logged in via ssh and x-win server started a screen and did some work, the x-win server I lost my internet connection so putty aborted, this morning I couldn't connect to the screen so I did screen -wipe then rebooted as another package kept exiting.
any help much appreciated, this has happened at a vital time during my PhD and I need ubuntu back asap! In the meanwhile I am working via ssh with a slow Internet connection so not ideal!
View 1 Replies
View Related
May 19, 2010
I have finally successfully triple-booted Snow Leopard, Windows XP, and Ubuntu 10 on an iMac but I have 1 problem: Whenever I am in Ubuntu and select "Restart," it goes to the splash screen and loads 2 of the dots and then freezes and hangs there forever. If I do "Shutdown," it works properly. Note: I am using rEFIt as the triple boot loader. GRUB installed on sda3 with Ubuntu.
View 9 Replies
View Related
Jun 14, 2010
I upgraded a week or so ago to 10.04, and everything was working fine. Then suddenly a few days ago the computer froze at the splash screen on startup. Thinking it was just some sort of neurotic, temporary issue, I restart again, but no luck -- same problem.
In terms of what I changed before the problem happened, I don't recall changing any system settings. On possibility is my changing things to skip the login screen and go strait to my account, but I believe I had done that a few shutdown/restarts before.
View 7 Replies
View Related
Dec 21, 2010
I was not able to install any version of Ubuntu. Everytime when the splash screen would appear, the computer would freeze and no hard drive activity would be present. The only way was to use the alternate install version of Ubuntu 10.10. Though, the splash screen problem persists. After the Ubuntu boot screen disappears, the splash screen appears with the coursor. About 3 seconds later it becomes unresponsive and the hard drive light stops showing activity. After reading a lot, I think it's my video card driver. I'm a complete newbie, so any commands need to be written out so I can just type in and cross my fingers. I can boot into the GRUB recovery mode. I log in and have a text based setup at this point.You know, I can type sudo commands and all that jazz. How can I fix my video? The graphics is not integrated. It's a 32mb nvidia TNT2 PRO.
View 1 Replies
View Related
Jan 3, 2010
Just installed Fedora 12 stable release without checking office/productivity, server, or developer "package options". Running Gnome.Used yum to get Amarok on here, and it freezes almost immediately every time I try to open it. The splash shows, a program shows up on the window-manager panel labeled "KDED Glob..." and the system freezes. Mouse, keyboard, all unresponsive. I had FC12 Beta on this exact system and Amarok worked fine. Noting that KDED Glob is probably part of KDE, and that I did not install KDE, I thought maybe Amarok depends on a KDE component that the repo did not pick up as a dependency. Tried to install as much of the mainstream KDE components as I could, with no change.
View 4 Replies
View Related
Apr 17, 2009
I boot linux from a usb drive so I can carry my distro wherever I go - I've been doing it for quite some time now and it's always worked wonderfully. Problem: This morning my little cousin unplugged the computer WHILE I was booting into linux. Power loss has happened before, but with no ill effects. This time however, it's decided it won't boot. The screen clears, and just as GRUB is about to load, it freezes and the computer reboots over and over.
I booted to a LiveCD of Ubuntu to try and fsck the drive, but it won't mount the volume. I've worked with this install so long, and have customized it so much I **really** don't want to do a reinstall.. What can I do?
View 3 Replies
View Related
Dec 1, 2010
Everything was going great earlier today when suddenly, my PC on a fresh boot, gave me a message that said something like "Ubuntu is running on low graphics mode ..". It was running a low res, i think it was 640x480, and gave me some repair options like a. Boot in low res mode for just one session b. Trouble shoot this error etc..There were 3 more options but i don't remember what they were.
i chose "boot in low res just for this one session", but it gave me the same error the next boot. Then i tried troubleshooting, which didn't work (restoring to a backup config was no use). Then finally i rebooted and started Ubuntu in Recovery mode, and i did something like "Fix broken packages" because , from the list of options it seemed like the only one which would help at that time.
But now, whenever i choose the Ubuntu option after starting my PC, it just restarts my computer. My other OS is Windows 7 which boots just fine. Hope someone can help me with this . In the meanwhile i'll try making a new MBR or something.
View 2 Replies
View Related
Jan 9, 2011
I have a Toshiba F30-114 laptop on which I want to have a dual boot Windows XP/xubuntu configuration.The problem is that when I install Xubuntu as dual boot, Windows XP gives a blue screen of death for a second and then reboots in the begining of the windows boot sequence.I can choose Safe Mode, Safe Mode With Networking, Safe Mode With Command Prompt, Boot With Last Good Configuration, and Start Windows Normally. But nomatter which one I choose it will result in a bsod following a reboot.I tried to remove the Xubuntu partition, which somehow also resulted in removing the XP installation. I then put the harddrive in an external case and used EASEUS Partition Recovery 5.0.1 on another machine which got back the Windows partition. Now Windows works again without any bsod.
View 2 Replies
View Related
Nov 22, 2009
i could manage to install fedora 12 on my laptop (asus f6a) using the iommu=off option, but when i try to boot it i just reboot without even seeing the fedora logo, i just see the the prompt for 5 seconds and then it reboots.
View 3 Replies
View Related
Mar 16, 2011
I have been using slackware since version 10.1 and really like it. I have never had a problem until lately, version 13.1 has been stable as a rock for me. The first 2 or 3 updates to current ran well but then the problem started. After installation Slackware would get to the splash screen and bring up the first picture of a disk drive then just hang and never go any further. I do have a good burn on the dvd, have checked the md5 and burned at 4x. then slack 13.37 does the same thing. this is on 4 different computers with several different video boards.
View 8 Replies
View Related
May 14, 2011
I just installed 5.6 using the x86_64 netinstall - all appeared to go well, albeit a little slowly. At the end of the install i rebooted the machine but CentOS won't load. If I select the CentOS option from grub (only other option is 'other') the machine instantly reboots.
Only options selected for install where 'server' and 'server gui'.
Editing the CentOS options shows the following but I've no idea whether this is correct or not (assume it is):
root (hd1,0)
kernel /vmlinuz-2.6.18-238.e15 ro root=/dev/VolGroup00/LogVol00 rhgb initrd /initrd-2.6.18-238.e15.img
View 8 Replies
View Related
Aug 1, 2009
I'm struggling a bit to install F11 on my laptop. When I put in the cd, i get to the menu. I elect to boot into the live cd, then my pc reboots and the menu comes up again...
View 11 Replies
View Related
Apr 25, 2010
If I re-install Grub 2 from the live CD should that reset all the personalisations such as as splash screen and colours in the Grub splash to default? In my case they are not resetting. I would expect them to revert to the default black/white you get when initially installing the OS. the Grub timeout to be a lot less than its supposed to be? e.g. the default timeout setting of 5 seconds is more like 2 or 3 in reality, and when I set my prefered value to 2 seconds it results in being about 1/4 sec or so.
View 9 Replies
View Related
Jan 26, 2011
Since updating my graphics driver on ubuntu 10.10, My splash screen has been inconsistant and messed up. Sometimes ill get random command lines mixed in with the usual splash, sometimes the splash wont show and it will just be black till the desktop appears, sometimes it flashes on and off. I originally tried fixing the resolution and just made the problem worse. Then I tried installing a new splash via gnome-look.org, but it just made my shut-down splash blank and didnt effect my splash at startup. I just want the original splash that ubuntu is supposed to have.
View 6 Replies
View Related
Mar 26, 2011
I'm running 64 bit Ubuntu, and on the start-up after I pass the GRUB it goes blank for a minute then briefly shows the splash for 5-10 secs and then jumps to the login screen. Also the screen is offset by about 10-15 pixels but from the login screen onwards it is centred. (It's also like this for if I'm in recovery mode)
How do I fix this and Im wondering if it is a hardware problem?
View 2 Replies
View Related
Oct 25, 2010
I recently installed Ubuntu Studio and after an update the standard Plymouth splash screen began to show. I tried changing it back via the "sudo update-alternatives --config default.plymouth" method but I am getting a blue kbuntu splash screen instead of the ubuntu studio splash.
View 1 Replies
View Related
May 1, 2010
I updated from 9.10 karmic to 10.04 LTS. Everything worked fine until, I restarted. Upon logout there are no splash screen like I had before in the 9.10, and my fan on my gfx are going crazy, spining at 100%. Well then I got to the grub loader, and discovered my boot splash was gone to. The only thing which is displayed on the screen are: mount dev /dev failed device71 Starting up. Then 10 seconds later alot of texts shows up and I get the login screen. I've looked around on the forum and other sites for a solution, but with no luck.
View 9 Replies
View Related
Feb 15, 2011
I been trying to change the splash screen, boot screen thing and now when it boots it just goes right to the log-in screen. I installed "startupmanager" but every .so file I try to add, just won't get added for some reason.
View 3 Replies
View Related
Feb 22, 2010
My friend was showing me how to change the splash screen and used a app called start up manager (SUM).He changed the resolutions for GRUB and something else. The GRUB screen resolutions has changed fine but after that I get a line of text which I cant read as its too quick.
View 6 Replies
View Related
Mar 1, 2010
I have just installed ubuntu on top of my windows 7 installation, on its own partition. From the beginning i could not install from the cd since it just froze every time i pressed install from the installation window. I got the commandline for the command to show itself, and noticed a command called quiet splash in the end. Wanting to see if it was hiding any errormessages i deleted it and ran the installer again. Now the installer did not crash and instead installed with no complications.In grub, when i try to boot windows 7 there is no problem. When i try to boot ubuntu it crashes. Ive left my computer for 30 minutes and still nothing has happened.However when i press e to see the boot command, delete quiet splash and press ctrl-x for boot, ubuntu starts with no problems.
View 2 Replies
View Related
May 3, 2010
I've recently made clean install to Lucid, and now Boot splash doesn't appear at start up. Only black screen appears and after that login window comes. However, boot-splash appears at shut-down and also in LiveCD.
View 1 Replies
View Related
Jul 19, 2010
So I turned off my computer the other day (I leave my laptop on, pretty much 24/7 I only turn it off if I have to, or I forget to plug it in I turned it off this time just because it was feeling warm)...
And when I went to turn it back on, the splash screen was big and ugly looking, then the orange ("loading") dots loaded to the end... but then it just stopped.
My computer wouldn't boot up... so then I used one of the older versions (you know grub lets you select versions before upgrades or whatever)... and the boot splash was the nice small version... and it loaded just fine, but then after the splash screen went away... the monitor just stayed black... same thing with the version before that.
So then I tried recovery mode on the first one (the latest), and when I clicked "boot normally" it took me to shell. However, everything was working fine, I could load up my non-x dependent programs like IRSSI just fine.
I think it has something to do with me installing the ATI proprietary driver (which was stupid of me, Ubuntu was handling my graphics card perfectly without it... and I hate using closed sourced software).
View 3 Replies
View Related
Nov 2, 2010
I'm using Ubuntu 10.10. How can I switch between text-based splash and GUI splash? My computer is currently showing a purple text based splash screen when booting Ubuntu. How can I switch it to GUI mode?
View 4 Replies
View Related
May 11, 2011
I have never had a boot-splash screen on my dual-boot configuration; and I recently added something in Synaptic, probably by mistake, that added a Debian splash screen to my boot menu. I think it's much more attractive than the bare menu; however it's not appropriate for an Ubuntu distro. Also, I'd like to know how to add and select boot-splash screens, that will show behind my boot menu, like the Debian screen does.
View 7 Replies
View Related
