CentOS 5 :: Fresh Install 5.6 Won't Boot - Reboots Instantly On Selecting From Grub
May 14, 2011
I just installed 5.6 using the x86_64 netinstall - all appeared to go well, albeit a little slowly. At the end of the install i rebooted the machine but CentOS won't load. If I select the CentOS option from grub (only other option is 'other') the machine instantly reboots.
Only options selected for install where 'server' and 'server gui'.
Editing the CentOS options shows the following but I've no idea whether this is correct or not (assume it is):
root (hd1,0)
kernel /vmlinuz-2.6.18-238.e15 ro root=/dev/VolGroup00/LogVol00 rhgb initrd /initrd-2.6.18-238.e15.img
View 8 Replies
ADVERTISEMENT
Aug 22, 2015
I'm trying to install Debian 8.1 LXDE 64bit on a Toshiba Chromebook cb30 from usb. When I select 'install' the laptop restarts and gets me back to the installer menu. I removed 'quiet' from the boot options and it seems that the reboot happens after initrd.gz is read. I previously installed the 32bit version on the chromebook and the installation process worked pretty much without any issues. I might have added 'mem=1024m' to the boot options, though even if I did, this doesn't do anything to my current attempt.
The chromebook processor according to `uname -a` is x86_64 Intel Celeron 2955U. how I could install the image or start debugging the issue?
View 2 Replies
View Related
Aug 2, 2010
I installed Ubuntu 10.04 LTS x64 on my laptop about a month back and I have been very, very pleased with its maturity and stability. However, I have seem to have hit a snag with my ventures into desktop Linux: I also dual-boot Windows 7 Professional x64, and it seems that every time I run Ubuntu 10.04, Windows 7 will immediately bluescreen on boot, reboot, and then be fine. I'm not sure what kind of harm this could be doing to the system, but it strikes me as very odd, and it's something I would like to resolve.
I have suspected this may have to do with mounting NTFS drives under Ubuntu, because my Windows OS and all of my media is stored on NTFS partitions. Needless to say, I would really rather not change this, because NTFS seems to be one of the few filesystems with large-file-support that will run with ease under Windows and Linux.
I have tried removing my main Windows 7 OS partition from the fstab in Ubuntu to see if that made any difference, but the problem persists. Could a secondary NTFS media partition mounted in Ubuntu really cause these sort of issues?
View 2 Replies
View Related
Oct 25, 2010
A weird problem arose a few months ago in my box and has plagued me ever since: the PC immediately reboots whenever I try to suspend or hibernate Ubuntu. It's actually instantaneous, as if I pushed the reset button.Way more days into googling than I wished I had to, I have tried just about every solution related to suspension/hibernation problems,but none really applies to the exact situation I'm experiencing, since most are about being unable to resume after suspending/hibernating, and in my case it seems the system is instantly killed and therefore doesn't even start said operation.
After rebooting, applications behave exactly as when the PC is hard-reset, which I think is an indication that running processes aren't being properly terminated and the system is just going down abruptly (if the less-than-a-second it takes to go down and restart the boot sequence isn't obvious enough).Before you ask:
everything was working fine before;
upgraded to Maverick but the problem remained;
every suspend/hibernate method that I know of (GUI, CLI) does the same;
can't easily test in another OS since I only have Ubuntu installed (no dual-boot or the like);swap partition is larger than RAM; /etc/initramfs-tools/conf.d/resume is pointing to the correct swap UUID;
tried several SUSPEND_METHODS and video-related options in /etc/default/acpi-support;
enabling/disabling the acpid and acpi_support services in BUM (Boot-Up Manager) has no effect;
enabling/disabling BIOS STR (Suspend-To-RAM)-related options has no effect;
unsetting NvAGP or setting it to 1 in /etc/X11/xorg.conf has no effect;
adding/removing the agpgart and intel_agp modules to /etc/modprobe.d/blacklist.conf has no effect;
installing the hibernate package has no effect;
not sure what I'd be looking for, but nothing strikes me as relevant in /var/log/messages.
This is really strange. May it be a hardware failure of some sort? What else can I try to work this one out or at the very least understand what's happening?
View 1 Replies
View Related
Mar 23, 2010
I have successfully installed CentOS 5.4, and after choosing it from the GRUB menu, I am getting the following error message:1706-Smart Array Controller Extended BIOS Data Area Memory Corrupted. Int 13h BIOS Cannot Continue - System Halted.I'm using two SAS disks that came along with the server, left the default RAID configuration (1+0) on a P410 controller
View 5 Replies
View Related
Mar 28, 2011
I installed CentOS 5.5 last night using the DVD ISO (from a USB drive thanks to the Universal USB Installer). I selected the Server and Virtualization packages, and finished the install all the way through. At the end, the installer asked me to remove any installation media and reboot the system. After rebooting, the system hangs on a blank screen with a blinking cursor in the top left corner that does not accept text. This is before the GRUB screen appears. For partitioning, I created a 4GB swap partition on sdb and a 16GB ext3 partition on sda, mounted at /, with the remaining free space on sdb mounted at /storage.
Does anyone know why this system is hanging before the GRUB menu?
View 4 Replies
View Related
Mar 12, 2010
I had ubu 904 and vista installed on an 80gb drive, i had a spare 80gb drive also. I setup a raid0 config in my bios, then installed ubu9.10 onto it. All was fine until the very end, and then it said grub failed to install.
So i rebooted, and im left with a blinking cursor. How do i install grub? Ive installed ubu a few times now and never had an issue so now im lost.
View 1 Replies
View Related
May 3, 2011
Followed steps 2-5 and purged/reinstalled grub now it boots as it should, NO idea where it was messed up.[URL].. I had 9.10 running in raid1 and upgraded my hardware (cpu, mb, memory etc) and wanted to do a fresh install of 10.04 to get updated. After following the various guides online such as [URL]...It begins to load grub and drops to a "grub> " shell. Which I have to do the following to get it to boot.
Code:
set root=(md1)
linux /vmlinuz root=/dev/md1 ro
initrd /initrd.img
boot
Then it boots up normally and I can use it like any other desktop. I've been over my grub.cfg and /etc/defaut/grub files and cannot find the issue. At this point I'm wondering if the fact it's a raid1 setup is keeping grub from finding it's files.
[Code]...
View 9 Replies
View Related
Jul 21, 2011
I have installed Centos 5.6 on a fresh VPS. After install I ran yum update command. After update was finished I noticed a message saying "Your system kernel may have been updated. Current kernel (2.6.18-238.e15) has been changed to : 2.6.18-238.12.1.e15)". When I reboot, I see two boot option in GRUB. one is Centos 5.6 (2.6.18-238.12.1.e15) Default and other is Centos 5.6 (2.6.18-238.e15). When Centos boots from default, it fails with fatal error. But when I boot with other option, the system boots as normal.
I need to know how to resolve this situation. Why yum update results in Kernel update and 2nd option in GRUB boot loader. and why Centos refuses to boot with update Kernel.
View 10 Replies
View Related
Apr 15, 2009
I just finished installing CentOS 5.2 x86_64 on a Dell Dimension 3100 (Pentium 4 with 64-bit support). On the first boot, after completing the final config steps (firewall, SELinux, time server, etc), the boot hangs on "Starting xend:". I have completed a successful installation on another Dell machine (different processor), with the same installation options (I recorded all of the steps and followed them for the second installation).
My boot commands in grub are:
root (hd0,0)
kernel /xen.gz-2.6.18-128.el5
module /vmlinuz-2.6.18-128.el5xen ro root=LABEL=/1 rhgb quiet
module /initrd-2.6.18-128.el5xen.img
View 7 Replies
View Related
Aug 7, 2009
i can't seem to get a fresh install to boot on a Acer Aspire T160 desktop computer, after the install finishes (basic install, command line only) it gets past 'Verifying DMI Pool.......' but then nothing, it just hangs, no Grub messages, nothing. Here is my hardware/config
Proc: Sempron 3200
Mem: 512 MB
/dev/hda1 110GB / Bootable
/dev/hda2 4GB Swap
/dev/md0 150GB /home
/dev/sda1 RAID
/dev/sdb1 RAID
i have tried RAID1 and RAID0 for md0, no change, i've also disconnected the raid all together and just installed on the IDE drive, still nothing. I noticed the BIOS supports hardware RAID but i have that disabled from past experiences and opting for software raid instead. i've gone through 'linux rescue' and reinstalled Grub, rebuilt raids and checked disks.
an interesting thing happens tho if i just have the IDE drive plugged in and nothing else... i get a BIOS message asking to plug in a bootable disk, does this mean it doesn't see my linux install at all? doesn't know to pass the boot along to /dev/hda?
i'm running out of ideas, tho neither have i tried installing to the raid... nor have i tried any other distros (Fedora, Ubuntu) on this machine yet.
View 3 Replies
View Related
Mar 21, 2011
I have used CentOS for a while and have never run into this issue. I searched all over and didn't see a similar issue anywhere, I did an install of CentOS as a server (no GUI) with only the base. Partition is /boot ext3, size of 100MB. The rest of the drive is partitioned as / with ext3. This is being done on a CompactFlash card of 32GB in size. The BIOS sees it as an IDE drive.
When the install completes and the system reboots, the grub stops at the grub> prompt. There is no menu for OS options. If I do the following commands:
grub>root (hd0,0)
grub>kernel /vmlinuz-2.6.18-194.el5 root=LABEL=/
grub>initrd /initrd-2.6.18-194.el5.img
grub>boot
View 19 Replies
View Related
Jul 9, 2009
The first server I installed installed fine. The second server, installed with the same config, went to "kernel panic not syncing no init found try passing init= option in kernel" error. I tried reinstalling but it keeps going to that error after install reboot. The storage is ISCSI connected via Intel Server Adapter, which allows it to boot from ISCSI. Not sure if that's the cause for the problem, but the first server is connected to the same ISCSI and installed just fine.
Is there a way that I can make sure ISCSI module installs during installation? Although I think it is installed since it's able to copy the files and setup /dev/sda. I just wana make sure that it installs during setup.
View 1 Replies
View Related
Jun 8, 2009
i didnt find a solution to a display problem im having. my server mobo is an asus k8n-dre with built in video. after the install(using built in video) the screen dosnt display fully as in black sections on the left and top of the screen. from the searching i did i found something about an "xrandr" command that would let me change the video settings but it didnt do anything with the black areas when i tried it. i also have a nvidia geforce 9500gt video card so i changed the jumper to boot from it and tried again. the black sections are still there but the centos display covers much more of the screen now. theres still about a third of an inch gap on the left hand side and about 1/4 of an inch on the top. ive also tried updating the software to see if it may be a driver issue but no luck. anyone know how or if it can fit to full sceen? the screen displays up to 1440x900 if im not mistaken but with the built in video it gave me lots of display options including the 1440x900. after changing to the nvidia card it only shows 800x600 and 640x480.
View 5 Replies
View Related
Jun 18, 2011
I'm trying to install FC15 x64, the install goes smooth and reports no errors, I looked around in /tmp/anaconda.log but couldn't see any relevant errors either, basically after rebooting and trying to boot my new install, I get:
error: file not found
Entering recue mode...
grub rescue> _
I've reinstalled 3 times now, first I was using USB, but now have tried with CD too. All I want is for GRUB to be installed on /dev/sda2 which is where my install is, and which is also the default location where the installer supposedly installs it to. I've also tried unplugging my other hard disks, and installing with just the first drive.
View 14 Replies
View Related
Jun 8, 2010
I have a new 500GB disk, with a partition with Windows XP, one with Windows 7, one for Ubuntu 10.04, one for /Home and one for swap. The systems were installed in that order. But after finishing with the Ubuntu installation, removing the CD from the drive and restarting, GRUB never showed up, and the system went straight to the Windows OS selector; the one prompting to start Windows 7 or an "Earlier version of Windows". So I can't get to Ubuntu, even though it seems it installed just fine.
As a note: just after the installation process ends and it shows the "remove CD" message, it spilled out a list of I/O errors in some sr0 device or something. But I just installed the same Ubuntu on a friend's computer and it showed a similar error list, yet his system works just fine... However, he doesn't have Windows 7, thus no OS selection screen other than GRUB. I didn't want to rush into editing the MBR or re-installing GRUB before I knew I had to do that.
View 9 Replies
View Related
Jan 27, 2010
I have an odd problem. I custom-built a workstation:
MSI Speedster 1 mobo
2x Opteron 2352
4x DDR2 ECC 4GB
3x 150GB WD Raptor, hardware RAID 0
1x 2TB WD Green, standalone
I had Linux Mint 8 installed, but before putting the machine to real use decided to toss Windows 7 on there to see how it worked. Now I am attempting to put Mint 8 back on to get everything set up. There have been no hardware changes since I had Mint installed before.
I can successfully install, but when I reboot I get a Grub error 17. The partition table looks like:
50GB / ext4
400GB /home ext4
...
2TB /backup /ext3
Grub is installed to (hd0), which is the 450GB hardware RAID. It does not make a difference when I run the installation (and then reboot) with the 2TB drive disconnected. Thinking maybe the new ext4 format was messing with Grub, I tried:
200MB /boot ext2
50GB / ext4
400GB /home ext4
And installed again and rebooted. No dice. I'd guess Grub has issues recognizing the hardware raid, except it worked before
View 1 Replies
View Related
Jan 2, 2011
I just did a fresh install of Slackware 13.1:
However, I get 4 grub listings for Slackware.
1. leads to kernel panic.
Code:
2. leads to kernel panic but with
Code:
3.... welcome to Linux 2.6.33.4 (tty1)
4. Welcom to Linux 2.6.33.4-smp (tty1)
I have never had any trouble with grub, and consequently never had to edit much in grub.
View 11 Replies
View Related
Jan 27, 2010
I have a dual boot machine (Win XP + Ubuntu 9.10 on separate physical drives) which was working fine. I now want to replace the Ubuntu 9.10 with LinuxMCE which is based on Ubuntu 8.10. Using the LinuxMCE install disk, I did a fresh install of Ubuntu 8.10 over the top of Ubuntu 9.10 (repartitioning the whole drive). On reboot, I now get a Grub "no such disk" error. I have run the boot info script which produced the following RESULT.txt:
Code:
Boot Info Summary:
=> Grub 2 is installed in the MBR of /dev/sda and looks for
(UUID=6a59ab9e-041f-41e2-b27c-02b8ada4c1af)/boot/grub.
=> Grub 0.97 is installed in the MBR of /dev/sdb and looks on the same drive
in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.
=> Windows is installed in the MBR of /dev/sdc
[Code]....
View 5 Replies
View Related
Jun 22, 2010
I did a fresh install of Lucid Lynx, and now when I start up it shows a blinking cursor for a second or so and then my monitor shows an "Input signal out of range" error. The same thing has happened before, and I was able to fix it by editing the boot options in grub to include 'nomodeset'. However, this time the usual grub loading screen where I would normally press esc to edit the boot options doesn't appear. (Spamming esc doesn't seem to work either.) If it matters (which I have an odd feeling that it does) I partitioned the hard drive into an ext4 partition that mounts at / , a swap partition, and another ext4 partition that mounts at /home . I attached a screenshot of what GParted says about it.
View 2 Replies
View Related
May 22, 2011
My setup: a work laptop that has a corporate Win7 image, and to which I have added a few partitions to try various linux distributions. The MBR is governed by Lilo from the Slackware 13.37 installation in /dev/sda5. The MBR boots no kernel image directly, it only chainloads the boot sectors of partitions /dev/sda1, /dev/sda5, /dev/sda6 and /dev/sda7. The latter three are formatted ext4.The Win7 boot mechanism traditionally resides in /dev/sda1, and the linux distros are required to install their boot machines into their respective partitions.
What I am trying to say is, I installed Ubuntu 11.04 into /dev/sda7, and told the grub installer the same thing: install yourself into the boot sector of /dev/sda7. Kudos btw for the Ubuntu installer, it comes across as a very professional piece of software.
View 9 Replies
View Related
Apr 21, 2010
Bit new to linux but what i saw with gloria in my opinion was a better os than windows. Just done a fresh install with helena on my sata drive and a dual boot with xp pro which is on my on my ide drive my problem is on boot I get to grub loading then boot hangs for 5 minutes before the dual boot screen appears and when it does I can not move up or down to select any options eventually however helena does start.
View 7 Replies
View Related
Jul 26, 2014
I have a VIA Epia M 5000 system with 2 western digital 1TB NAS SATA drives connected through SATA<->IDE adapter. Everything installs and writes as expected except... grub. It never boots, after a message 'Grub loading' I always get 'error: no such disk'. I've tried numerous times and has been attemping to fix the issue for the past 2 days.
/dev/sda
0.999TB 0xfd linux raid autodetect partition
1GB 0xfd linux raid autodetect, logical partition
/dev/sdb exactly the same
0.999TB 0xfd linux raid autodetect partition
1GB 0xfd linux raid autodetect
/dev/md0
RAID1 of /dev/sda1 and /dev/sdb1
marked as ext4, boot point /
/dev/md1
RAID1 of /dev/sda5 and /dev/sdb5
marked as swap
update-grub2 in rescue mode generates grub.cfg with SET root=/mduuid/UUID_OF_SDA1
then after that there's search --no-floppy etc --set root=/mduuid/UUID_OF_MD0
I'm writing this from memory but simply the two uuids are different. Is this correct? I get those UUIDs to compare from blkid. All partitions are marked as bootable. grub-install /dev/sda and grub-install /dev/sdb produces no errors. grub-install /dev/md0 does not work, complains about superblocks or something similar.
Grub.cfg file contains insmod raid mdraid1x and similar lines, so that should be ok. Grub drops to rescue mode with message error: no such disk. Not device, but disk. Google finds many results for 'no such device' error, but I am not getting that error. 'ls' produces
(hd0) (hd0,msdos1) (hd1) (hd1,msdos1) ls ANY_VALID_PATH produces empty newline being printed, nothing more.
setting prefixes manually does not work, with error message 'error: file not found'. ls (hd0,msdos1)/boot/grub also produces empty line being printed. Rescue CD and auto-assemble of md0 and md1 works, the files are there, everything okay, except grub.
View 3 Replies
View Related
Nov 28, 2015
I just installed debian from debian-live-8.2.0-amd64-standard+nonfree.iso and after installation, which finished without problems, I cannot boot the system. I get the error:
Code: Select allfile '/boot/grub/i386-pc/normal.mod not found
From grub-rescue via ls command I see that I don't have the i386-pc folder inside /boot/grub. I have only two files:
unicode.pf2 and grub.cfg
View 7 Replies
View Related
May 6, 2011
I just installed the newest version of Xubuntu using the LiveCD, I chose to install it alongside my current installation of Windows 7, everything went well it seemed, but now when I choose Windows 7 under the GRUB menu it just restarts my system and then takes me back to the grub menu, Xubuntu works fine though and boots fine, I tried sudo update-grub, didn't fix it.Heres the boot info from a script I found, but being rather poor when it comes to diagnosing Linux, I figured it'd be best to post this and see
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
View 2 Replies
View Related
Apr 17, 2009
I decided to do a fresh install of 5.3. I dedcided to use the entire HD for the install and not partition in any special way. I told it to format the HD and use the entire HD for linux OS. Just went thru the install with no additional software added, only what was the default install. After prompting for a user name and password i rebooted as requested. The issue is that i recieve no GUI to login to the desktop. Im able to SSH to the box and i tried doing yum update and it did not fix anything.i want to learn the command line but i need the gui for backup.
View 10 Replies
View Related
Jun 3, 2011
Company laptop HP Compaq 6710b, NTFS on hd0, Win7 installed. BIOS allows boot from USB drive, so wanted to use Ubuntu with no influence on laptop (no disconnecting internal drive, no dual boot, etc). Performed an install from CD to an USB drive making a JFS partition mounted on / and a swap partition. The installer made the JFS partition bootable (boot flag is set) as I asked. On first boot I got:
error: hd0 out of disk.
grub rescue>
View 14 Replies
View Related
May 8, 2010
I cannot boot from the OS dvd. It says looking for boot info on CDDVD then boots right into an older version of windows that happens to be on the hdd. If I unplug the hard drive I can get into the CentOS installer but this is useless because the hdd isn't viewable as a place to install the new OS. I don't know if I need to format the drive before hand so that Cent has a clean slate or if there is a problem with the DVD itself. The later I dont believe so based on the working of the installer while hdd unplugged. The DVD drive is on its own ribbon and both hdd and dvd drive or set to primary master in DOS.
Aside: I have recenlty moved to centOS formally using ubuntu and messing around with fedora on another computer. I am using cent based on work with school, they recommended cent for project with professor.
View 6 Replies
View Related
Aug 13, 2011
I have a vps, and the only way to access my vps is using SSH . putty.
After playing around with my vps, learning how certain stuff works and so on, i somehow messed up my server.
Is it possible to do a fresh install remotely using only putty, and nothing else but putty, of my server with centos 5.6?
View 2 Replies
View Related
Jun 9, 2010
I have installed 10.04 from scratch (fresh install) and I am unable to change the default option of grub using the keyboard. while booting
View 7 Replies
View Related
