Slackware :: Slackware Current Freezes At Splash Screen / Fix It?
Mar 16, 2011
I have been using slackware since version 10.1 and really like it. I have never had a problem until lately, version 13.1 has been stable as a rock for me. The first 2 or 3 updates to current ran well but then the problem started. After installation Slackware would get to the splash screen and bring up the first picture of a disk drive then just hang and never go any further. I do have a good burn on the dvd, have checked the md5 and burned at 4x. then slack 13.37 does the same thing. this is on 4 different computers with several different video boards.
View 8 Replies
ADVERTISEMENT
Sep 30, 2010
so, I compiled the 2.6.35.7 kernel yesterday and used the config from 2.6.35.6 doing make oldconfig,etc
its the vanilla kernel with BFS, BFQ[*], Tuxonice, aufs2, & squashfs-lzma patches after compiling and rebooting I have noticed that the mouse freezes whenever the pc cpu is running high cpu % this didnt happen before with any other kernel and as I said, I used the 2.6.35.6 config Has anyone else had issues with 2.6.35.7 kernel? hardware is amd athlon64 3300+ 2.4ghz 1GB RAM, on 32bit Slackware -current I am going to compile the vanilla kernel now and see what happens.
View 3 Replies
View Related
May 18, 2010
Need to know how to create a custom initrd boot splash for slack current
it would be nice to have a seperate one for bootup/shutdown
anyone know how-to or where to find good info?
View 2 Replies
View Related
Mar 21, 2011
I downloaded AlienBobs LibreOffice 3.3.1 package [url]. I installed it without any problems.
But when I try to start it, the splash screen shows for a moment and then disappears.
When I strace /usr/lib/libreoffice/program/swriter I get this:
Code:
On my notebook (which unfortunately is broken) the program ran fine. JRE is installed.
View 4 Replies
View Related
May 23, 2010
I upgraded one of my laptops from 13.0 to current yesterday. I has an intel graphics card:
Code:
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
After all the package upgrading, removing obsolete packages, running lilo etc, I rebooted and I was really taken by surprise. Apparently, this certain intel graphics card doesn't work right with KMS. The boot process starts, I get to see the two tux twins and a few lines of boot messages, but as soon as KMS kicks in, everything goes completely blank. It doesn't crash or freeze or anything, the boot process continues, but it's all blank.
What's completely weird is that I have another laptop, which reports exactly the same graphics card, but KMS works fine there with current!
Anyway, I did some google search and I found that it's a common problem. There was a suggestion to remove any vga=... lines from lilo.conf, but that didn't help at all. Adding nomodeset to my boot options, disabled KMS, and I was able to boot to init 3, just like in 13.0. The problem was that then, it wasn't possible to launch X, because the intel driver that is included in current requires KMS to work!
So, after trying out a few different versions of the intel driver, I found that anything from 2.8.x and down wouldn't compile and that anything after and including 2.10.x require KMS. The only versions that would work are 2.9.0 and 2.9.1, which seem to have an identical effect here. They both work, but I have artifacts using my favorite mouse cursor theme, I get a black box instead of the mouse cursor. Not a big deal and choosing another theme fixed that too.
What I'm thinking is that probably more people will have the same problem and nothing is more frustrating than a completely blank screen. Maybe it would be a good idea to keep the 2.9.x versions of the driver in /extra. That and perhaps also add a note in the UPGRADE docs about adding nomodeset if you have an intel graphics card and you get a blank screen.
View 14 Replies
View Related
Oct 24, 2010
Lost my wireless keyboard and mouse upgrading slackware current.Boot seems to be normal.I just can't login, cause have no keyboard.
View 2 Replies
View Related
Feb 5, 2011
slackware-current kernel 2.6.35.10-smp for instance if i just want to connect to wep ap. i done
[code]...
it says waiting for carrier and it just time out, im wondering why i read somwhere that its not working good with slackware 13.1
View 9 Replies
View Related
Jan 22, 2010
I recently upgraded to slackware-current from Slackware 13 via slackroll, and have only encountered one problem. My file manager no longer thumbnails images, and icons (mostly PNG) aren't appearing no matter what GTK theme is set. Running from the command line produces no errors, and when brought up in something else (say feh /path/to/icon.png) it works perfectly. This is the only hitch I have encountered so far. The same thing happens with emoticons in Pidgin. Does anyone know of a fix?
View 5 Replies
View Related
Feb 28, 2011
First time I've done this in awhile Upgrading my Slackware64 -current VM, following the standard routine that has always worked in the past -
Code:
slackpkg clean-system
slackpkg install-new
The clean-system removed 2 packages -
util-linux-ng
eggdbus
Installpkg will no longer work, complaining that the rev command is not found. The problem hit with the removal of util-linux-ng. I cp'd util-linux to ~/. Extracted with tar and executed the doinstall. Fixed.
View 4 Replies
View Related
Jun 10, 2010
Some program's like Adobe Reader, Open Office and some other, when opening them, the screen is not readable an attachment )My hardware is:Code:00:02.0 VGA compatible controller:Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)It did not happen on the same hardware with OpenSuse or rhel5 installed
View 4 Replies
View Related
Apr 6, 2011
I installed Slackware 13.1 a little bit ago, played around with it, performed an upgrade with Slackpkg, messed around with some settings, and chose a new theme. I had set the runlevel to 4 and when I rebooted after choosing a new login theme the screen just went black at the point where the login prompt should have appeared. I couldn't even get into the CLI. Using a LiveCD, I set the run level to 3 again and was able to log in, but when I try to start X the screen goes black and freezes again, so I believe my new login theme is the culprit. Is there a way to change to the default login theme from the CLI?
View 14 Replies
View Related
Mar 22, 2011
after update to slackware current 4 days ago i cant get sound working in wine in starcraf 2 i mean i got sound in instalation but not in game and i get error when i wanna configure sound in winecfg
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:wine_snd_pcm_recover underrun occurred
err:alsa:wine_snd_pcm_recover underrun occurred
in game i dont got that error but sound dont work btw my sound card is asus xonar essence stx
View 2 Replies
View Related
Jan 5, 2010
I updated my kernel in slackware current but can't install lilo, when i was with my old kernel it gave an error about not finding the sda drives (they were named hda before the upgrade).I booted into the slackware 13.0 dvd and modified fstab and lilo.conf replacing hda with sda but lilo still gives an error of not finding sda drives.How can i install lilo so i can boot into my sistem??
View 14 Replies
View Related
Feb 26, 2011
I've upgraded Slackware-13.1 I had installed to Slackware-Current using a local tree I had download with mirror-slackware-current.sh script, but when I rebooted I could not get the graphics to load. I think it's because I've also modified /etc/groups and add an username after audio: and video: group, but I forgot that and had to remove slackware from the machine.
View 4 Replies
View Related
May 15, 2010
I've tried a few different ways to install the ATI graphics driver "fglrx" to get 3D acceleration.If I try to install using the standard file "ati-driver-installer-10-4-x86.x86_64.run" from the ATI web site it appears to work but then I discover it actually got an error.I saw a reference to ATI requiring 32-bit libraries to install their 64-bit driver. Is there a link or post that explains how to add the 32-bit libraries. Will that solve the problem, or will I just waste more time trying that?
View 6 Replies
View Related
Feb 1, 2011
I use Alien Bob's mirror-slackware-current.sh with an excludes.txt to only download the parts of current that I want. Unfortunately it is not working for part of the exclude.txt file and I am at a loss to know why.
The excludes.txt is
Quote:
slackware64/e
slackware64/f
slackware64/kdei/kde-l10n-ar-4.5.5-noarch-3.txt
slackware64/kdei/kde-l10n-ar-4.5.5-noarch-3.txz
[code]...
This ignores e/ f/ y/ testing/ pasture/ source/ and usb-and-pxe-installers/ It also ignores most of kdei/ and /extra It is meant to ignore most of extra/source and just download the source for flash-player-plugin, but it is ignoring all of extra/source/, however the same syntax is working for kdei/ and extra/.
View 2 Replies
View Related
Mar 22, 2011
This is not an earth-shattering issue, but, something I've recently noticed with the Chatzilla add-on for Seamonkey in Slackware-current. Maybe it is just my problem.If I add Chatzilla to FF 4.0 everything works as expected, that is, when I launch Chatzilla the default start-up window shows up with a list of IRC servers to click on (freenode being my favourite).
However,when I click on Chatzilla in Seamonkey I get a blank window that shows up, there is no server list. I noticed that the window in Chatzilla went blank for Seamonkey recently after a -current update (maybe a library issue?)
View 2 Replies
View Related
Jan 10, 2011
I'm very keen on getting Mumble installed on my slackware -current 64 bit install. I found a slackbuild script for 12.2 here, but changing the version number resulted in failure. I also tried following the build instructions on the Mumble website, which failed with the following.
Code:
neil@slackbox:~/Downloads/mumble/mumble-1.2.2$ qmake -recursive main.pro
Reading /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro
WARNING: /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro:33: Variable LIBPATH is deprecated; use QMAKE_LIBDIR instead.
WARNING: /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro:33: Variable LIBPATH is deprecated; use QMAKE_LIBDIR instead.
[Code]...
View 12 Replies
View Related
Mar 25, 2011
I wish to do a fresh install of Slackware without KDE. I could use my Slackware 13.1 DVD but I thought, why not give -current at try? Is there a -current ISO or must I install 13.1, without KDE, and then upgrade to -current? Or, is it possible to remove 'all things KDE' and then upgrade to -current?
View 8 Replies
View Related
Feb 21, 2011
i just updated my slackware to current, and every time i try to log in in my kde session my desktop is upside down.i mean literally everything is upside down, the only way i can have a usable desktop is with the "fail-safe session" of kde option on kdm which is what i'm using right now.does anybody know how can i solve this?i would post a snapshot of the upside down desktop but i can't do anything when i'm using it. fonts, windows, panels, icons everything is upside down..i solved this, just reinstalled the nvidia drivers and everything is goood again
View 1 Replies
View Related
Feb 25, 2011
I'm running slackware-current in a virtual machine on virtualbox 4, 512 mb ram, 1gb swap.Everything works fine, except the x11 mouse. Xfce will start up fine, and show the 'tips and tricks' dialog, and then freeze. I can't change to a TTY, or click. The mouse moves, but doesn't click.
View 13 Replies
View Related
Mar 10, 2010
Got an Asus eeepc 900a. Runs Intel 915 graphics. Upgraded to slackware current last week. X would not start. Based on info here, I reverted back to earlier libdrm and xf86-video-intel. That got it working again.
Updated Slackware current again today. I think I got a new kernel. Now, halfway through boot time, the screen goes blank, then comes back and the font is tiny. Gone into framebuffer mode. If I start X, it just freezes. Nothing but a reboot will get out of it.
I have vga=normal in lilo.conf, but I read that this is no longer used. I can find no way to turn off framebuffer mode. From other threads here, I have tried append="i915.modeset=1" in lilo.conf. Has no effect.
I could revert Slackware to 13.0 from current, and that would make the eeepc useful again. Is there anything else I should try?
View 14 Replies
View Related
Mar 17, 2010
Fairly recent enough system. nvidia 6200.
Full install of slackware. then i use these instructions to install drivers:
Quote:
Install nvidia driver in Slackware Linux
Before begin the nvidia driver installation, you must make a copy of the original /etc/X11/xorg.conf as a backup. Use the copy command example below:
If you choose to install the nvidia driver that you download from nvidia website, you must close kde or x-window and install the driver from Linux command line terminal.
Copy the driver to the directory that you placed all third party software such as /usr/local/src. This is not necessary, just a good habit. To install the driver, run the nvidia driver with the sh command like in the example below.
Now, you just need to answer all the questions to configure nvidia driver and the nvidia installation program will do the driver and kernel installation for you.
When i startx the computer freezes with an underscore in the top left hand of screen and i can't switch between tty's.
I know the pc and card work fine with other linux and win os's.
View 5 Replies
View Related
Mar 5, 2010
I am running Ubuntu karmic with Gnome desktop
I rebooted it as a package (GRASS GIS) wouldn't open properly, the splash screeen appeared but it appears to freeze and does not get to the login screen. I have tried to boot in safe mode but pressing ESC at grub doesn't work and Ctrl+Alt+F1 also fails to invoke anything. I can connect remotely via ssh. I have tried to remove Gnome desktop so I can just go straight to commandline but it still brings up the splash screen, I removed desktop using sudo apt-get remove gnome-desktop it said it did.
So why did this happen, last night I logged in via ssh and x-win server started a screen and did some work, the x-win server I lost my internet connection so putty aborted, this morning I couldn't connect to the screen so I did screen -wipe then rebooted as another package kept exiting.
any help much appreciated, this has happened at a vital time during my PhD and I need ubuntu back asap! In the meanwhile I am working via ssh with a slow Internet connection so not ideal!
View 1 Replies
View Related
May 19, 2010
I have finally successfully triple-booted Snow Leopard, Windows XP, and Ubuntu 10 on an iMac but I have 1 problem: Whenever I am in Ubuntu and select "Restart," it goes to the splash screen and loads 2 of the dots and then freezes and hangs there forever. If I do "Shutdown," it works properly. Note: I am using rEFIt as the triple boot loader. GRUB installed on sda3 with Ubuntu.
View 9 Replies
View Related
Jun 14, 2010
I upgraded a week or so ago to 10.04, and everything was working fine. Then suddenly a few days ago the computer froze at the splash screen on startup. Thinking it was just some sort of neurotic, temporary issue, I restart again, but no luck -- same problem.
In terms of what I changed before the problem happened, I don't recall changing any system settings. On possibility is my changing things to skip the login screen and go strait to my account, but I believe I had done that a few shutdown/restarts before.
View 7 Replies
View Related
Dec 21, 2010
I was not able to install any version of Ubuntu. Everytime when the splash screen would appear, the computer would freeze and no hard drive activity would be present. The only way was to use the alternate install version of Ubuntu 10.10. Though, the splash screen problem persists. After the Ubuntu boot screen disappears, the splash screen appears with the coursor. About 3 seconds later it becomes unresponsive and the hard drive light stops showing activity. After reading a lot, I think it's my video card driver. I'm a complete newbie, so any commands need to be written out so I can just type in and cross my fingers. I can boot into the GRUB recovery mode. I log in and have a text based setup at this point.You know, I can type sudo commands and all that jazz. How can I fix my video? The graphics is not integrated. It's a 32mb nvidia TNT2 PRO.
View 1 Replies
View Related
Feb 14, 2010
I set up a dual boot on my laptop a few days ago, between Windows XP and Ubuntu 9.10 (installed from Live CD). All the hardware is working fine.
Anyway, SOMEtimes, during the splash screen , the screen turns off (physically turns off) and the hard disk seems to stop. I cant do anything appart from force it to power down.
Yet sometimes, it boots up fine.
I want Ubuntu to work first time EVERY time.
View 3 Replies
View Related
Jan 24, 2010
I'm trying to take my current windows7 (x64) setup and make it into a dual-boot setup with slackware 13.0 (x32) and am hitting a brickwall. I guess I would like to know if I can salvage the situation without formating my windows drive. I fully intend to, but I had hoped to not do it this month. I'd like to get dual boot going so I can master it and acquire all the files/drivers I'll want and then format and do it 100% right next time.
Currently I have windows setup on a 3x 500gb Raid0 onboard array which itself has been flawless. After I shrunk my current partition size to give me about 25gb of free space I proceeded to setup Linux, and I was unable to perform the cfdisk portion for partitioning the array for Linux.
I tried using cfdisk:
/dev/hdx (a1-a3,b1-b3)
/dev/sdx (a1-a3,b1-b3)
I even attempted to locate with: cat proc/partition and tried using cfdisk on every device it located. It always said it was either an unknown partition table and should I start at zero, or bad partition. I was of course too concerned over my windows setup (which has almost 1tb of stuff I have not backed up) to go any further into the unknown.
PS: I have used Slackware before, back at 8.1, 10, and even a very brief interlude at 12.0, this is my first attempt on this computer however with 13.0, it is currently running fine on my laptop and my PS3 (Laptop is even dual booting 7/Slack13. Albeit without raid)
Phenom 9850
M2N-SLI Deluxe (Nvidia AM2)
4x1gb of 1066 kingston hyperX
3x500gb WD Caviar Black Sata2 3.0
View 3 Replies
View Related
Jan 3, 2010
Just installed Fedora 12 stable release without checking office/productivity, server, or developer "package options". Running Gnome.Used yum to get Amarok on here, and it freezes almost immediately every time I try to open it. The splash shows, a program shows up on the window-manager panel labeled "KDED Glob..." and the system freezes. Mouse, keyboard, all unresponsive. I had FC12 Beta on this exact system and Amarok worked fine. Noting that KDED Glob is probably part of KDE, and that I did not install KDE, I thought maybe Amarok depends on a KDE component that the repo did not pick up as a dependency. Tried to install as much of the mainstream KDE components as I could, with no change.
View 4 Replies
View Related
