Ubuntu :: .04 In VM Doesn't Have Response To Keyboard After Update
Apr 11, 2010
I installed Ubuntu10.04 in VM. It worked without any problem. There was no GIMP in that version and thought to update the OS. I invoked update manager and updated the OS. After the update when I try to type in the password I see no response for my key board. Mouse works fine which is attached to my Key-board.
I deleted the VM completely and did a new Ubuntu10.04 installation it worked fine I could able to run couple of bash scripts but after update It doesn't response to keyboard.
View 2 Replies
ADVERTISEMENT
Jul 19, 2010
Fedora 10 GUI hangs on login screen and there is no response from keyboard... able to login to single ser mode...there are lot of free spaces in all the partitions... If we try to login with init 3..then the network interfaces are not showing up... I tried logging with rescue mode..able to get network interfaces. I am unable to repair the root partition...I would like to know how to umount root partition... I tried linux rescue nomount in rescue mode..the command is not working...
View 3 Replies
View Related
May 21, 2011
I have openSUSE 11.3 on my Lenovo Thinkpad X61. It has been running fine for many months, but yesterdaychanged. For example, between the two previous words I had actually typed "something" ("yesterday something changed") but it was lost. I type at normal speed but the machine cannot keep up. Hopelessly annoying. This happens in every application I have checked. The only unusual thing I did yesterday was to load a bunch of photos off a relative's digital camera. I'm concerned I may have picked up spyware.
View 3 Replies
View Related
Feb 25, 2011
Whenever I make an ssh connection to my Fedora 14 server, the echo of my keyboard strokes are very jerky. It will echo a few, then stop for a moment, then it echos all the keyboard entries from the time it stopped responding all at once. Anyone have any ideas on why this started happening? This happens from any computer I use to connect. It happens with Putty and SSH Secure Shell.
View 11 Replies
View Related
Feb 11, 2015
I use the debootstrap to make a base Debian System of the ARM architecture for BananaPro [URL]... , and install the LXDE desktop. But the keyboard and mouse didn't response after the LXDE boot.
If I use the Debian system without the LXDE desktop, and it is normal. Meanwhile, I only installed the framebuffer driver, and can't find the right GPU driver to install.
Is caused by the lack of the GPU driver ? and what should i do ?
I get some error logs from /var/log/Xorg.0.log file,as follows:
Code: Select all[ 17.206] (II) Module shadow: vendor="X.Org Foundation"
[ 17.206] compiled for 1.12.4, module version = 1.1.0
[ 17.206] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17.206] (==) Depth 24 pixmap format is 32 bpp
[ 17.207] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 17.211] (==) FBDEV(0): Backing store disabled
[ 17.212] (==) FBDEV(0): DPMS enabled
[Code] ....
View 0 Replies
View Related
Feb 20, 2011
I am able to boot Fedora 14 to the GUI, log in on the keyboard, see the desktop, and then I get no response from the laptop's keyboard or trackpad.
I do not know how to obtain hardware specifics on my keyboard or touchpad, so perhaps that would be good info for me to start with...
BTW my ultimate goal is to run an Amahi server on the laptop. 2600 has a pentium III 1.13GHz processor and 512Mb RAM
View 3 Replies
View Related
Jul 12, 2011
I cannot use several keys (1,`, q, a, z & Esc) on my keyboard.I have just installed Kubuntu 11.04, AMD64 version via Wubi. Everything went well w/o any errors. At 1st boot, I also logged in w/o errors, and then tried some apps for Office & Network and shut down. The keyboard was still alright at that time. However, The problem started on the 2nd boot after the installation. Those keys do not response in Kubuntu & Windows 7 login screen and even in my PC's BIOS setup.
My laptop model is Dell Lattitude E6410, core i5, Intel HD Graphics, WD HDD 160GB. And I installed on the other partition, not my Windows one.
View 1 Replies
View Related
Nov 30, 2010
I use skype, and several times when i have it open, more often when i am using it, the hole system stuck with no response. The mouse stop moving, the keyboard does not work, even control + alt + backspace does not work! The only available choice is to reboot the computer.
View 3 Replies
View Related
Dec 5, 2010
I'm installing slack 13.0 in a Dell 2350 for a friend. once installed, it works ok for a while then within some somewhat random period of time, just plain locks up. the keyboard stops working, the mouse cursor still moves, but there is no response from mouse clicks. i was ssh'ed into the machine one of these times to see if i could read the logs during a lockup. the machine stopped responding to the ssh session as well (actually i had an instance of mc running at the time, and the machine still responded to it. when i exited mc, i was stuck in console never-never land). the logs show absolutely nothing. /etc/messages keeps showing MARK long after the lockup. all other logs are not updated since boot. this machine has an i810 chipset, is there a driver issue here?
View 6 Replies
View Related
Apr 28, 2009
I've tried to use the GUI tool for update system in Fedora 10. It listed all of the available updates successfully, but it have not any response when i click the 'Update System' button~
View 2 Replies
View Related
Sep 30, 2009
I have Fedora 11 installed on a Dell Precision M60 lap-top, running KDE. I've used KDE for years, but a number of issues with KDE 4 had forced me to look at alternatives recently. With F11, KDE 4 seems to be getting more functional, being more or less usable for real work... However, a couple weeks ago, I ran "yum update" and picked up KDE 4.3.1, and while it seems to have fixed a few more things, there also seems to be a regression in terms of performance - on this lap-top anyway.
Basically any window operation -- opening a new one, moving, resizing, even moving the mouse from one window to another (I use auto-focus) -- is slow, and during this time the CPU load from the "X" process becomes very high -- close to 100% according to "top". When not "touching" any windows, CPU load goes back to normal. I did run across some advice to turn off desktop effects, which I did -- it reduced the sluggish response slightly, but the problem is still present. And I had the same settings before the update, and performance was fine.
Here is some info about this machine:
Dell Precision M60 lap-top
CPU: Intel(R) Pentium(R) M processor 1.70GHz
RAM: 1 GiB (not a lot by today's standards, but this issue does not seem related to swapping)
video: nVidia Quadro FX Go700 (using default installation, nouveau driver)
display: 1920 x 1200
kernel: 2.6.30.5-43.fc11.i586
KDE: kdebase-4.3.1-2.fc11.i586
nouveau: xorg-x11-drv-nouveau-0.0.12-40.20090528git0c17b87.fc11.i586
View 1 Replies
View Related
Apr 20, 2011
For most actions on my system now it seems that clicking doesn't get a response on the first click. It can take 2 - 4 clicks at times for the system to react. Although I work primarily in my browser (Google Chrome), it does happen outside as well. I am running Gnome as the window manager.
View 2 Replies
View Related
Jul 18, 2010
I'm trying to install slackware 32 bit 13.1.After loading kernel it asks for keyboard configuration, but keyboard (usb wireless) doesn't work.
Keyboard works on the old 13.0 installation, on bios and also in the boot options of 13.1 installation cd.
I've tried removing legacy usb support and changing usb2.0 speed from high to full. Nothing changed.
Anybody with this strange problem? (kernel of setup seems also to detect it correctly as a trust keyboard).
View 9 Replies
View Related
Jul 19, 2011
when I try to access any page even small html pages it stays like 3 seconds in HTTP request sent; waiting for response. state..even when I use Lynx locally on the server..bypassing any possible network issues..logs dont show a thing..the server itself is a high end server with nothing running on it apart from apache which is not serving anny clients now, firewall is disabled and hostnamelookups are set to OFF.
View 1 Replies
View Related
Apr 20, 2011
Normally Update Manager always finds the update to the next version of Ubuntu. It still hasn't given me any notion whatoever. I allready changed the settings from regular to LTS, but nothing changes. There are updates to the kernel, but I cannot download them, so I'm kinda stuck here.
View 5 Replies
View Related
Jun 23, 2011
I upgraded from 10.10 to 11.04 and when i try to check for updates in the update manager it says:
W:Failed to fetch http://ppa.launchpad.net/and471/kaza...source/Sources 404 Not Found
, W:Failed to fetch http://ppa.launchpad.net/and471/kaza...amd64/Packages 404 Not Found
[Code].....
View 3 Replies
View Related
Apr 12, 2011
I have GNOME mplayer installed. Update Manager offers an update for it, "movie player for Unix-like systems," with the following:Changes for the versions:
2:1.0~rc4~try1.dsfg1-1ubuntu1
2:1.0~rc4~try1.dsfg1-1ubuntu1+medibuntu1
But when I tell Update Manager to perform the update it says,Requires installation of
[code]...
View 2 Replies
View Related
Jul 14, 2011
I have Update Manager set to check for updates on a daily basis but to prompt me before downloading or installing them. Because I have Update Manager set to check on a Daily basis, I expect that I will receive a prompt that an update is available no later than the day after the update is available (assuming of course I have my computer turned on). Yet I only receive a prompt days or even a week after the update was made available.
For example, let's say that my PPA of Google Chrome issues an update on Tuesday. Despite the fact that my ubuntu computer was on for a couple hours in the morning on Wednesday, Thursday, and Friday, no update prompt appears alerting me to available updates. If I manually open Update Manager on Friday afternoon, then the update is there and waiting for installation. But how come I don't get an automatic prompt that an update is available? Do I have my settings wrong or something?
View 9 Replies
View Related
Apr 19, 2010
Problem one: My keyboard wasn't working. Solution one: Needed a new xorg.conf file.
Problem two: How to open a programme in terminal without rendering the terminal unresponsive until that programme is closed. Solution two: Append a '&' at the end of the command. For example: gedit test-file & [/SOLVED]
The problem is, my keyboard doesn't respond when I first boot into Ubuntu. None of the keys seem to work except the 'power' key (which helps me turn this laptop on or off). During the second boot, I incessantly press the space bar hoping for something to happen. Only when the boot process completes and I see my desktop does the keyboard, finally, respond. That is precisely how I'm typing this very moment. I had not faced this problem on Windows. I use a laptop (an old one but not too old).
Nothing happens during the first boot regardless the key I press on any time.
It is a nuisance to restart my laptop and periodically strain my space bar for the keyboard to respond on the second boot (It refuses to respond on the first boot, regardless of what I do).
When I, sometimes, open files using gedit through terminal by typing: ~$ gedit PATH, what happens is that I am then unable to use any other commands on the same terminal until I close gedit or open another terminal. I can type in the terminal but nothing happens until I exit gedit. I would like my terminal to be responsive whilst I am working on gedit simultaneously. I hope it is not impossible...
View 9 Replies
View Related
Mar 17, 2010
Windows crapped out on me (not surprisingly) and I am using Ubuntu to transfer all of my files to an external hard drive. However, when the computer loads the Ubuntu disk I get to a language selection menu, but my keyboard doesn't work. It won't let me make any sort of selection, and the 30 second timer eventually times out and my system just restarts and the process starts all over again.
I've tried plugging my keyboard in to all of the different USB ports on my computer, but still nothing. The strange thing is that the keyboard works just fine when I changed the BIOS settings to boot from the cd-rom... it just doesn't work when Ubuntu is ready to run..
View 3 Replies
View Related
Mar 23, 2010
i think the motherboard is cooked but not sure...be4 i call them up and say wtf i want to make sure i have not missed anything (i dont think i have* ok the MO is a MSI g31tm-p21 and the processor is a intel celeron e3300. when i powered it on lights on front panel came on *case has temp readings and fan controls* all of that powered on...the two case fans power on and the processor powers on cd drive powers on and HDD powers on as well so the power box is working there is not a problem with that. i recheck all cabling and its all right i had jumped the cmos a few times now. and with the cmos jumped the M/O would not even TRY to turn on so that was good. it would only turn on when jumped the right away the *keep data* setting took the batt out and waited to let the cmos clear that way. still nothing and i am still getting no post screen. keyboard dos not light up nor dos the mouse
View 6 Replies
View Related
Feb 28, 2011
I created a bunch of keyboard shortcuts via "System > Preferences Keyboard Shortcuts," and they all work flawlessly except one: Nautilus. I just set it to run the command "nautilus" and it doesn't do anything. My GNOME panel launcher runs the same command just fine.
View 3 Replies
View Related
Jun 2, 2011
after I updated my BIOS , my keyboard didnt work in grub , but I can use it before grub.
View 2 Replies
View Related
Jan 28, 2010
The title says it all. I'm trying to install Ubuntu 9.10 on my PS3, but the keyboard isn't typing. I can't complete the install, because I can't type anything. I've followed all the steps properly, everything goes smoothly, the mouse works just fine, and the capslock and numlock lights light up on the keyboard, and toggle when I press the corresponding buttons. The keyboard even works at the kboot prompt. After I choose the partition to use, I have to enter my information to continue. Without being able to type, I can't progress. The keyboard obviously works, since I can type just fine at the kboot prompt.This one's got me scratching my head. I'm going to try a 9.04 cd tomorrow, see if that works, but I was really hoping to get 9.10 on there.
View 8 Replies
View Related
Feb 13, 2010
I wanted to type something in french so I started the on board keyboard so I'll know where the letters are. Now my keyboard is locked, and the onboard doesn't work too... all I did was to click on some of the settings of the onboard.Sadly the onboard didn't show me the french keyboard, so that's a downer too.
View 1 Replies
View Related
Jun 10, 2010
I'm trying to install 10.04 but my Logitech diNovo Edge wireless USB keyboard doesn't work.
View 1 Replies
View Related
Jun 23, 2010
When I'm using Nautilus, I've found (for years) that I've had to hit Ctrl+C, Ctrl+V or Del multiple times until the commands would register. I noticed this occurs when the mouse is moving. I've looked under System > Preferences but can't find anything. Is there a key in gconf or something that I can disable?
View 2 Replies
View Related
Oct 18, 2010
My keyboard layout doesn't work any more from one hour
I don't know why ?
i try to delete layouts like Arabic and USA English and add them again but the problem still working .I'm writing English lang. only.
when i press Alt+shift to change Lang. nothing happened
what i can do now ?
I'm using UBUNTU 10.10
View 3 Replies
View Related
Dec 16, 2010
When I start ubuntu I can't use my mouse and keyboard. It works in a second when the log in screen appears but then it freeze. It works in bios, grub and safe mode. I use mx518 and ace kl 400.
View 9 Replies
View Related
Apr 29, 2011
I have been working on this problem for a year now. It is becoming critical because I need to upgrade Linux. I really want Ubuntu.
Keyboard works fine at power on. I can edit BIOS options. I put in the CD or DVD, it starts fine. Keyboard works for selecting boot options. Once the installation begins however, no more keyboard...
This is true across every version and distribution of Linux I have come across- I have dozens of liveCDs -EXCEPT Linux Mint 8.
Laptop = Acer 5517
Running Linux Mint 8 & Windows 7
I have no USB Legacy Emulation BIOS option
I've tried this: [url]
View 3 Replies
View Related
