My keyboard layout doesn't work any more from one hour
I don't know why ?
i try to delete layouts like Arabic and USA English and add them again but the problem still working .I'm writing English lang. only.
when i press Alt+shift to change Lang. nothing happened
what i can do now ?
I'm using UBUNTU 10.10
I have problems with keyboard layout switcher. On Gnome everything works. But when I start to use other DE I can't switch keyboard layout by default. So I create xorg.conf, but anyway it doesn't work...
View 1 Replies View RelatedKeyboard layout control's icon doesn't change when different input language is selected. Is there any way to make it behave similar to Windows?
View 1 Replies View RelatedI have swapped backspace key with ` (grave) key. So I added a layout in the /usr/share/X11/xkb/symbols/us with the following lines:
key <TLDE> { [ BackSpace, BackSpace, BackSpace, BackSpace ] };
key <BKSP> { [ grave, asciitilde, dead_tilde, asciitilde ] };
Now the backspace and grave work well, but when I press shift + grave (previously backspace key), I get grave, not asciitilde.
This is strange because I tried the same thing (with the same us file) with Chakra linux and it worked without any problem.
I used YAST to set my keyboard layout to Belgium AZERTY. But my '{}@' keys dont work. [ALT]+[CTRL]....
View 3 Replies View RelatedI'm using netbook Acer Aspire One D250-0Bb pre-installed Windows XP. Now i have Gentoo. I have trouble with Xfce (lastest stable version) , where my keyboard don't react. I can move just with touchpad. I think, it's in X-server driver, but i can't find any information about that.
View 2 Replies View RelatedRunning Ubuntu Lucid Lynx, GNOME 2.3Keyboard Preferences utilityAdding any Spanish language keyboard layout makes my Alt_R not work in ANY layout! I see that it changes Alt_R to "Iso_L..." for all/both layouts, including USA layout. When I click "Reset to Defaults" it's fine again, USA layout shows Alt_R again. I've tried all the variants of the Latin American layout and the Spain layout and they all do the same thing.What is "ISO_L..." and what's going on?i DESPERATELY need my Alt_R to work!
View 2 Replies View RelatedI have installed opensuse 11.3 a couple of weeks ago in 2 computers and both suffer of the same problem.In my asus laptop, i have a german keyboard. It is correctly recogniced as german keyboard by ev-dev, i guess. (ev-dev managed). But i need to write some spanisch symbols too, like accents (á © í ³ ? ñ¬ ·hich in a normal linux, they do work. For some reason, after rebooting, or after some time of having it running, the keyboard layout resets to an invalid setup, here accents get not over the letter (?a ?e ?i ?o ?u), so i have to select my layout again in the gnome control center.
With my other computermore or less the same.Its a desktop PC with an spanisch keyboard. But i thinck i picked German keyboard during installation and now it starts always with german with some sort of 5 secs delay when setting it. I have to pick spanisch and i always delete the german layout, but after some time having it running, it resets to the previusly deleted german layout.
having problems with my keyboard layout since upgrade from F11 to F12. When I reboot and login into gnome I have to switch back to my layout as it has been set to USA default layout.
View 3 Replies View RelatedI'm trying to install slackware 32 bit 13.1.After loading kernel it asks for keyboard configuration, but keyboard (usb wireless) doesn't work.
Keyboard works on the old 13.0 installation, on bios and also in the boot options of 13.1 installation cd.
I've tried removing legacy usb support and changing usb2.0 speed from high to full. Nothing changed.
Anybody with this strange problem? (kernel of setup seems also to detect it correctly as a trust keyboard).
I defined a variant to my keyboard layout (Italian) editing the file/usr/share/X11/xkb/symbols/it and adding this block:
Code:
partial alphanumeric_keys
xkb_symbols "itaro" {
[code]....
I'm a used Ubuntu user on a pc, and I like the french keyboard layout because it allows me to type accentued characters easily.I found a win-fr keyboard layout but it's much like windows and not so good.I found xmodmap.fr keyboard layout and I'd like to know if it was possible use it with my Mac SL 10.6.5, maybe I could do xmodmap xmodmap.fr or a way to convert to mac layout file.
View 1 Replies View RelatedRecently i have bought a Dell Inspiron n5010 laptop and installed ubuntu 10.10. I have a windows 7 installed as well. In windows Us English Table for IBM Arabic 238_L keyboard layout works for my pc. But, i can not find this layout in my ubuntu.
View 2 Replies View RelatedWindows crapped out on me (not surprisingly) and I am using Ubuntu to transfer all of my files to an external hard drive. However, when the computer loads the Ubuntu disk I get to a language selection menu, but my keyboard doesn't work. It won't let me make any sort of selection, and the 30 second timer eventually times out and my system just restarts and the process starts all over again.
I've tried plugging my keyboard in to all of the different USB ports on my computer, but still nothing. The strange thing is that the keyboard works just fine when I changed the BIOS settings to boot from the cd-rom... it just doesn't work when Ubuntu is ready to run..
I created a bunch of keyboard shortcuts via "System > Preferences Keyboard Shortcuts," and they all work flawlessly except one: Nautilus. I just set it to run the command "nautilus" and it doesn't do anything. My GNOME panel launcher runs the same command just fine.
View 3 Replies View Relatedafter I updated my BIOS , my keyboard didnt work in grub , but I can use it before grub.
View 2 Replies View RelatedI wanted to type something in french so I started the on board keyboard so I'll know where the letters are. Now my keyboard is locked, and the onboard doesn't work too... all I did was to click on some of the settings of the onboard.Sadly the onboard didn't show me the french keyboard, so that's a downer too.
View 1 Replies View RelatedI'm trying to install 10.04 but my Logitech diNovo Edge wireless USB keyboard doesn't work.
View 1 Replies View RelatedWhen I'm using Nautilus, I've found (for years) that I've had to hit Ctrl+C, Ctrl+V or Del multiple times until the commands would register. I noticed this occurs when the mouse is moving. I've looked under System > Preferences but can't find anything. Is there a key in gconf or something that I can disable?
View 2 Replies View RelatedWhen I start ubuntu I can't use my mouse and keyboard. It works in a second when the log in screen appears but then it freeze. It works in bios, grub and safe mode. I use mx518 and ace kl 400.
View 9 Replies View RelatedI have been working on this problem for a year now. It is becoming critical because I need to upgrade Linux. I really want Ubuntu.
Keyboard works fine at power on. I can edit BIOS options. I put in the CD or DVD, it starts fine. Keyboard works for selecting boot options. Once the installation begins however, no more keyboard...
This is true across every version and distribution of Linux I have come across- I have dozens of liveCDs -EXCEPT Linux Mint 8.
Laptop = Acer 5517
Running Linux Mint 8 & Windows 7
I have no USB Legacy Emulation BIOS option
I've tried this: [url]
After I finished upgrading Xubuntu from 9.10 to 10.04, I discovered that my keyboard stopped working in X Server. The upgrade process was running smoothly until the last moment, when it produced some error, which I, unfortunately, did not write down. Anyway, the upgrade has completed; uname shows kernel version 2.6.32-31. Now the keyboard works fine if I select a recovery mode at startup, but if I type 'start gdm' from the shell or select the default option in GRUB while booting, the keyboard becomes unavailable right from the login screen. I can log on using the virtual keyboard, but that's all I can do; the keyboard is still dead.
View 5 Replies View RelatedI cant log in as user. My keyboard doesn't work, not even ctrl+f1. So i cant get dmesg....Only thing that is working is alt+print screen+REISUB.
When i booted in safe mode from grub i can log in but only if i enter my root password. And then do /etc/init.d/gdm start.
If i tray to continue straight to gdm in safe mode my keyboard is not working so i can`t log in.
Day before i notices`d that i cant log in with ctrl+f1. When i tray i get this masage madone-desktop login: madone /bin/sh : cant open madone
I have tried fedora 14th and also latest ubuntu but my lenovo notebook keyboard did not detected by OS. i think it is due to some kernel missing. keyboard work if acpi=off. My laptop is "Lenovo s10-3c". 1GB RAM, 160 GB Disk.
View 3 Replies View RelatedI've got a Compaq MX 11800 keyboard that has a ball (used as a mouse). The ball works fine in Ubuntu and Windows, but does not work in Debian or Fedora.
I don't know where to start troubleshooting this issue. Any help is appreciated.
Here's a picture of the thing: [url]
How do you enter your password terminal the keyboard doesn't work when I try
View 2 Replies View RelatedAfter booting up my pc, sometimes it loads, and then my mouse freezes and i am unable to do anything at all. keyboard doesnt work either. Causing me to do a restart. when starting my pc, i get the ubuntu splash screen and then it jumps to a black screen with: "desktop login" after i out in my log in it asks for the password, i put that in and get "Weclome to Ubuntu etc" (forgot all the words, but its some statement welcoming me to ubuntu. The i get "tim@tim-desktop: $" but this is all on a black screen. Only way to get past this is to reboot my pc. and then it loads properly.
View 9 Replies View RelatedAfter a reboot earlier today, my Ubuntu 10.10 box (which I set up earlier today) has started rebooting to tty1. But I can't type a username - nothing appears, although the system does respond to control-alt-delete, and reboots. I don't see anything obviously wrong in the setup when I boot using the live CD and mount my disk.
View 1 Replies View RelatedI recently tried to upgrade my Dell Latitude C610 from 10.10 to 11.04, but it got kernel panic right in the middle. Now it at least boots, but the mouse doesn't work--only the keyboard does. How do I fix this enough to use the mouse, or how do I operate Gnome with a keyboard?
View 2 Replies View RelatedI just installed Debian Testing (with Xfce) along side Win7 on my Dell XPS M1530 and now neither my keyboard nor my USB-mouse work at the login screen. Both worked perfectly during the installation and Grub as well recognizes my keyboard. The Numlock-LED can be switched on and off during the boot, but fails to work at the login screen.
View 2 Replies View Related