Software :: Unable To Run Configure Script For Libptp?
Jun 25, 2010
I have issues with running the configure script for libptp2. I have tried three different versions, including the latest. The problem is that the configure script halts due to an infinite stat64() of the /etc/localtime at this point:
Code:
checking for inline... inline
checking whether struct tm is in sys/time.h or time.h... time.h
checking for error_at_line... yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
[Code]...
View 3 Replies
ADVERTISEMENT
Jul 27, 2010
I just switched from Ubuntu to Fedora 13 because I was unable to get Ubuntu to connect to wireless networks. I tried everything suggested in help and forums, and kept getting "Bad Password" with WICD and Network Manager. Now, with Fedora...I still can't connect.
Problem #1: The guide says to "...make sure that the relevant wireless interface (usually eth0 or eth1) is controlled by NetworkManager," and that I do this via: System>Administration>Network
However, there is no Network option under System>Administration.
Problem #2: I open Network Manager, which displays a list of networks. I click on mine, configure it with WPA and the right password, and it fails to connect: "The network connection has been disconnected."
View 12 Replies
View Related
Apr 1, 2010
I keep Resuming Compositing enabled in Desktop System settings , next time when i see the settings it says "Compositing is disabled"
What's the reason for this?
How does one enable All effects in Desktop system settings -> Desktop Effects?
Observation: Selecting any of the options and apply(save) will say
Following effects could not be affected.....
View 4 Replies
View Related
Jan 7, 2010
Installed SUN JDK usnig the following command on Ubuntu[ 9.10 Karmic Koala]. It seems already there is a default version(open jdk) but i want to use SUN JDK for Android development.
when i run a simple program i get the following error
# javac HelloWorld.java
The program 'javac' can be found in the following packages:
* openjdk-6-jdk
* ecj
* gcj-4.4-jdk
[Code].....
View 2 Replies
View Related
May 27, 2010
I am using ubuntu 8.10 ....
i am unable to configure my internet on it ..i have tried a lot of things, which i have are as follows...
1. i used these commands but unfortunately no result... sudo ifconfig eth0 192.168.1.21 $ sudo route add default gw 192.168.1.1$ sudo vi /etc/resolv.conf this file is edited to enter ipadd etc....
2.Setting the ipaddress in system>admininstrator>network config
there i edited the properties of "Auto eth0" for my ip address, mask, and default gateway....
P.S: My internet connection is perfectly working fine in windows xp. Details shown in windows are :
ip address : 192.168.1.21
mask :255.255.255.0
gateway :192.168.1.1
dns :59.179.243.70
View 7 Replies
View Related
Jun 15, 2010
I am unable to configure evolution,i am using ubuntu 10.04.
View 3 Replies
View Related
Feb 10, 2010
I was using LDAP authentication for my http shares access. But I screwed but the LDAP server and now I wanted to configure my http shares against NIS authentication.
I followed the procedure to setup NIS client, added:
Though I am able to ssh to my machine using NIS user, the http is still not authenticating the users
It fails with the following message in /var/log/secure
httpd: pam_unix(httpd:auth): authentication failure; logname= uid=48 euid=48 tty= ruser= rhost= user=nisuser
48 is the default apache user in my /etc/passwd
I don't have any pam_ldap.so in my httpd pam file since I had to remove LDAP configurations and I can't switch back to LDAP.
View 2 Replies
View Related
Feb 10, 2010
I've installed glib-2.2.1 on ubuntu 8.04 with the typical ./configure --prefix=/usr/; make ; make install process ,everything appeared to go fine. When running the configure script in the pygobject-2.21.0 , it stops on an error looking for glib.
checking for GLIB - version >= 2.22.4... no
-Could not run GLIB test program, checking why...
-The test program failed to compile or link. See the file config.log for the
-exact error that occured. This usually means GLIB is incorrectly installed.
configure: error: maybe you want the pygobject-2-4 branch?
How should glib be installed. I have already installed older version of glib. Will it be overwrited with new version ?
View 3 Replies
View Related
Mar 3, 2010
I am using RHEL 5.3 , i want to configure my comapny email account in thunderbird 3.0.3 . i am unable to connect my server. my server is pop.bizmail.yahoo.com. what should i do , shall i need to do any more settings apart from thundermail...
View 4 Replies
View Related
Apr 14, 2010
I have install ubuntu 9.10 on my Dell studio, I have local broadband connection with its user name and password which i use to connect internet everytime i need along with its IP Address, subnet mask, Default gateway, Preferred DNS server. Where should i put all this details to connect internet, i have already tried with Network connection in System -> Preference . It all work well in window
View 9 Replies
View Related
Sep 2, 2010
I am trying to enable quota on my /home directory for understanding how quota works. I have not made a separate partition for my /home. The logical name of the directory "/" is /dev/sda5 on my machine
[Code]...
I tried to search this on Google as well but didn't get any satisfactory results. I usually post questions only when I have do not get results by checking earlier threads on various forums. If you find I am going the wrong way then please show me the right track.
View 1 Replies
View Related
Feb 2, 2011
I recently attempted to install the ubuntu restricted extras package, and it eventually led me to a certain screen (screenshot attached.) It seems I need to agree to the terms of use, but I can't seem to actually agree to it. I can't click <Ok>, I've tried pressing enter, pressing y then enter, pressing ok then enter, and a few other things.
View 9 Replies
View Related
Aug 4, 2011
I have just installed Lubuntu (from Ubuntu). I would like to add a few items to the right-click menu. I tried doing it using ObMenu as well as directly by editing the configuration files in /home/{user}/.config/openbox, but the default remains unchanged (even after reloading the configurations from the right-click menu or rebooting). Could someone give detailed instructions (e.g. where should I add some apps so as to see on the right click applications list?). The default on my right-click are a file manager, a browser and a terminal.
Also, I dont see a way to edit the main menu (the one at the lower left corner of my screen) anymore, although I remember to have accessed it from the main menu somewhere.
View 1 Replies
View Related
Sep 24, 2010
We have several new DELL STUDIO-XPS machines pre-packaged with Win7 onto which we intend to load 10.3 the 2.6.22.5-31-default kernel as a dual boot.
The first test machine however is showing reluctance to reveal its NIC under SuSE. The card in question is a Broadcom Netlink (TM) Gigabit Ethernet with driver version 12.4.0.3 under Windows.
The error message I recieve under SuSE is "Unable to configure network card because kernel device is not present".
ifconfig confirms this showing only the loopback device.
The tg3.ko driver seems to be OK (although I am not sure how to interogate this file for its vesion?). It is listed under /sbin/lsmod and I have attempted a rmmod followed by an insmod but thsi seems to have no effect.
Talk on the net suggests Windows will not 'let go' of the card on a dual boot machine but this seems unlikely and I have attempted the various power down options without success.
View 4 Replies
View Related
Oct 15, 2010
I have a dynamic IP connection. so i got hostname on [URL]. Now i want to configure a ftp server with that. I am choosing following options in the network configuration wizard:
1. default transer mode: passive
2. use server's external ip instead
3. get external ip address from the following address: XXXXXX.dyndns.org
4. ask opearting system for a port
5. test result:
[Code]....
View 13 Replies
View Related
Mar 6, 2010
I have installed debian in my machine. I have a bsnl broadband connection. But I am unable to configure the broadband connection in my system.
View 1 Replies
View Related
Oct 8, 2010
I HAVE DUAL BOOTING SYSTEMVISTA + RED HAT 5.0ON VISTA I CAN RUN WI FIBUT ON RED HAT IT CANT WORK AND SAYS CANNOT ACTIVATE NETWORK DEVICE eth13c501 device eth1 does not seem to be present delaying initialisation.
View 1 Replies
View Related
May 28, 2010
I have just set up the above OS, however, installation did not find my network and therefore APT additional software & security updates could not be accessed.The network was simple to setup post installation.I have uncommented a few sources in the sources list file but obviously that does not,in itself, suffice to get accessability. I am also unable to configure my supported HP printer and I assume that can only be done with an additional package via APT.
View 6 Replies
View Related
May 1, 2015
I just upgraded to jessie (kde) and am not able to fully configure my sound. It was working on wheezy. I have tried alsamixer and managed to get sound (playback & record) through my front case connectors. Can't get anything out of my rear motherboard connectors.I also have a bluetooth headset which I have successfully paired but which doesn't show up as a sound device in pavucontrol.
lspci | grep udio
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 9 Series Chipset Family HD Audio Controller
[code]....
View 1 Replies
View Related
Dec 15, 2010
I have a router which have 4 ethernet ports(eth0,eth1,eth2,eth3,eth4 ) & One ADSL Line & One USB, I need to configure My router eth3 as a WAN & eth0 as a LAN using iperf, I am going to findout test a my Application(using iptables) whether my application is correct or wrong As of now I configured like server pc1(192.168.1.230)--->eth0(gw)(192.168.1.1)Router--eth3(gw)(192.168.2.1) -->pc2(192.168.2.157). For eth3 as a WAN and eth0 as a LAN. But I am not able to ping between two pc's.
View 1 Replies
View Related
Jan 25, 2010
My father recently installed Ubuntu 9.10 on my new AMD dualcore, but we have not been able to access the net.we tried resetting the modem/router. Windows XP had no problem getting us online - why is it such an issue with Ubuntu?
View 3 Replies
View Related
Mar 13, 2010
I cant configure internet connection.
View 3 Replies
View Related
Mar 28, 2010
I have tried various rules, like opening port 53 for the DNS with little success. I finally figured that you need to set the source port to 53 and NOT the destination port.However, I have been unable to figure out what ports apt-get requires. The only way I get it to work is to accept everything in iptables.
View 1 Replies
View Related
May 18, 2010
I just installed Ubuntu this afternoon, and it has been working perfectly until i tried to install the flash plugin. My laptop froze and i had to unplug it to restart. Since then, whenever i try to log on, an error message appears saying that Gnome Communications (? i think thats what it said) center didn't configure properly and to contact the computer administrator.
View 2 Replies
View Related
Jun 6, 2010
I have attached the screenshot of the option which I select in Windows for making the same internet broadband connection. I am unable to find the same option in Ubuntu 10.04. Till now I was using the Pppoe Dialup. But now I am unable to configure this one.
View 9 Replies
View Related
Aug 10, 2010
this issue which has suddenly occurred on both my Desktop and my Laptop. When I try to configure an IP address to any interface I get the following error....
uadmin@Ubuntu:~$ ifconfig br0 addr 192.168.10.1/24
addr: Unknown host
ifconfig: `--help' gives usage information.
uadmin@Ubuntu:~$
I get this for ethernet interfaces as well. I do not understand what is different as I was able to configure the ip address only the day before yesterday on the laptop..? The Desktop has had this issue for about 3 weeks now.
br0 Link encap:Ethernet HWaddr 32:70:40:91:06:25
inet6 addr: fe80::3070:40ff:fe91:625/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[Code]....
View 2 Replies
View Related
Oct 7, 2010
Karmic 9.10 latest updates
Nvidia GeForce 6150 LE
Nvidia driver 185.18.36
Monitor Acer P205H - 1600x900 native
I can't configure the monitor. and the display.
I've tried with both the built in display configure and the Nvidia one. Can't choose 1600x900 on either one.
I either can't see all the display on the monitor, or it takes on some weird panning mode and looks like the display is about 2500x1500 or something.
Here's the xorg.conf file. Clearly it does not see the new monitor and the modes are wrong. These settings are for the previous monitor. How Can I fix this so that my display works properly? Thanks.
Windy
Code:
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
code....
View 1 Replies
View Related
Mar 27, 2009
I am using FC6 on my system, I tried to configure the soundcard using, system-config-soundcard utility. But once I type system-config-soundcard from my shell, it doesn't start at all. However its not showing any error also. What can I do next?
View 1 Replies
View Related
May 31, 2011
I'm unable to configure the apache2 with python support. I have done the configuration in the following method, but unable to start the python cgi support: I have installed the libapache2-mod-python it has installed python.load in the mods-available directory. In the apache2/sites-available/default file, I have added the following lines.
[code]...
when I request for a python script in the py folder. I get a 404 Not found error.
View 1 Replies
View Related
Jan 8, 2011
I am new Linux, but have already installed a new HDD in my PC and successfully installed Fedora 14. Unfortunately, I am unable to configure my system for dual boot and my PC always boots right up into Windows Vista which is the original OS on my original HDD. I have searched the web, but only find examples of splitting partitions and dual booting into different versions of Windows. I apologize for the simple question, but I am certain that someone in here can point me in the right direction. My intention is to migrate to Linux entirely, but want to learn Linux before completing a full migration.
View 4 Replies
View Related