I get this message when attempting to copy file from usb drive to directory in system: missing destination file operand after `/usb0/Applications/Server/AirSync/Application/linux/airsync.bin'
View 3 RepliesI am in the process of moving all my data from Windows to Ubuntu. So far everything has gone well and I am very impressed with Ubuntu and regret not doing this years ago.
One program is giving problems. It is a program called Sharescope and I pay a subscription for it and it runs in my Windows partition. I downloaded Wine and then downloaded Sharescope three times but when I click to install it comes up with the following message;
Archive: /home/johnlaptop/Downloads/SSGoldFull(3).EXE
[/home/johnlaptop/Downloads/SSGoldFull(3).EXE]
End-of-central-directory signature not found. Either this file is not a zipfile, or it constitutes one disk of a multi-part archive. In the latter case the central directory and zipfile comment will be found on the last disk(s) of this archive. zipinfo: cannot find zipfile directory in one of /home/johnlaptop/Downloads/SSGoldFull(3).EXE or /home/johnlaptop/Downloads/SSGoldFull(3).EXE.zip, and cannot find /home/johnlaptop/Downloads/SSGoldFull(3).EXE.ZIP, period.
I contacted Sharescope and they said it was a permission issue in Ubuntu. Is there any way to install this program or will I have to work with it in Windows?
i've recently bought a ZTE MG880+ modem of reliance and since then i'm trying to establish a net connection in 9.10 but failed. As i was searching for a solution i came to know about wvdial and usb modeswitch;i dwnlded both the programs in XP and installed only wvdial because i couldn't install the usb modeswitch program. But still i was able to modeswitch with the following procedure,-
note down the idvendor & idproduct with lsusb
sudo chmod 777 /lib/udev/rules.d/61-mobile-action.rules
sudo gedit /lib/udev/rules.d/61-mobile-action.rules
changed the default idvendor and idproduct with my own e.g 0x19d2:0xfff5
saved the file in downloads folder with name 90-mobile-action.rules
moved the file to /etc/udev/rules.d folder
reboot
After rebooting when i again plugged in the usb modem the lsusb command showed that idvendor:idproduct=0x19d2:0xfffe.So i think that mode switching is done but still i'm unable to connect to internet
I downloaded some application for Linux (program microcontroller LPCXpresso). When I trying to install it some error appears
Code:
Can't find a usable init.tcl in the following directories:
/installkitvfs/lib/tcl /installkitvfs/lib/tcl8.6 /home/damon/src/installkit-1.3.0/out/lib/tcl8.6 /media/lib/tcl8.6 /lib/tcl8.6 /media/library /library /tcl8.6b1.2/library /tcl8.6b1.2/library
This probably means that Tcl wasn't installed properly.I think Tcl is installed, maybe I need to reinstall it if so, how? What I need to do?
Whenever I try to install a program by Synaptic Package Manager, it downloads packages but it doesn't install those.It tries to connect to downloads.openwrt.org but unables to connect because of connection time out. I have attached a screenshot of it.
View 7 Replies View RelatedHowever i am unable to find the Run program. It was easy to find on the other Distro's i have tried but i have been unable to locate to in Fedora 12.
View 3 Replies View Relatedfrom the commend line i went to compile the c program by giving the commend "gcc first.c -o first" but the commend line showing gcc is not found. iam using fedora 13 what can i do to compile the program . the program i used to compile is below
#include<stdio.h>
main()
{
printf("hello word
");
}
I'm traying to remove several program, sucha as transmission, bunshee and other, I can't unistall them from the console by typing sudo apt-get remove ***, neither trhough synaptic, neither thru ubuntu softare center... each time I try to unistall I got the message that its being unistall but after it I open the softare just if like its properly installed.
View 2 Replies View RelatedI work for a food manufacturing company in Sheffield and we have a machine called a duck injector which operates off a Human Machine Interface Touch Screen. The program inside this has been written and runs using Linux. This is stored on a Compact Flash Card.
This screen has been damaged and isn't made anymore so we've been sent a new screen which is a 12'1" Intel Atom N270 HMI.
I simply tried to put the Flash Card in the port and powered it up (booting from a removable source) and i get the following:
I've had absolutely zero experience with Linux so i'm completely stuck as to what to do to get it to work.
I've got a flash card with XP on it so i can boot up in that but then it won't read the flash card with the program on because it's in Linux (presumably?)
I've also tried downloading Mubuntu 10.10 and booted it up using that on a flashdrive - this allows me to read the flash card with the program but i can't get it to boot up/run.
just installed iptraf and was using it. However, I lost the SSH link while IPTRAF was running. Now when I try to go into detailed statistics it says: detailed interface stats alreday monitoring eth0. How do I stop that so I can start it again? I tried kill and the process id which I found using pidof iptraf but it won;t stop the program.
View 1 Replies View RelatedMade a little c-program i want to start at boot and found out that i can do that through the rc.local script that runs once every time the computer boots. Say that i have a program called test in /home/user/Documents... what do i write rc.local?
View 10 Replies View Relatedsince last days I am trying to run a simple c / cpp program using eclipse in my newly installed fedora 13, but every time it says either "program file not specified" or "binary error"
View 10 Replies View RelatedI am running firefox, and when I minimize a programme I "lose" it completely in the bottom right hand corner of my screen and unable to re-call. Have i fiddled with something to create this stupid error.
View 2 Replies View RelatedI have reinstalled Suse 10.1 as dual-boot with Windows XP. I am now unable to get a program to run from the Linux command line. I am familiar with the program and have had it running previously when the machine was Linux-only. Everything else, e.g.Firefox and Office, work fine in Suse.
[Code]...
The problem occurs with all commands - not just this one. isis3Startup.sh is in green on the screen so I assume I should be able to run it - I have never had any problem when it was installed previously.
I have downloaded the jdk-6u20-linux-i586.bin from their website. I also read the instruction given to install jdk manually but i was not able to run a single program. Can someone give a step by step instruction to install jdk and also tell me how to set the path so i can easily execute the programs.
View 9 Replies View RelatedI was running 9.04 and could, through some magical sequence of toggling options that I was unable to figure out, occasionally get recording from the mic to work in audacity. Ardour worked more reliably, but is kind of over-featured. Audacity is simpler and I know how to get things done. For a while, I was doing basic recording in Ardour, saving it to wav then editing in audacity.
Well, I noticed a howto on getting audacity working in 9.10... so I upgraded ("what could possibly go wrong?"). I still can't record audio in audacity and ardour is now ALSO unable to record audio. They start recording samples but nothing comes in but silence. I've got audacity set to ALSA/default/default and when I click monitor, the stream appears in the pavucontrol app. I've moved it to the input device and that doesn't seem to affect the results at all. Everything looks like it should be working fine except there's some invisible mute button, or something. Under alsamixer's Capture section, Mic has a red "CAPTUR" with no bar to adjust.
I have Mint 10 installed, and I am using Pidgin with GFire plugin for my messenger. I am having an issue where pidgin will become greyed out, and I am unable to use the program after it greys out. This happens fairly fast after I start up pidgin, maybe 2 or 3 minutes. Screenshot below, cant post links so trying this.
View 1 Replies View RelatedI"m trying to kill some processes that are interfering with airmon-ngWhen I run airmon-ng and tell it to turn on monitor mode on a given interface it says:Code:Found 5 processes that could cause trouble.If airodump-ng, aireplay-ng or airtun-ng stops working aftera short period of time, you may want to kill (some of) them!
PIDName
20875wpa_supplicant
20879NetworkManager
[code]...
I have tried to execute the below ns.c program in RHEL 4 by using the command
#gcc -c ns.c -o ns.o
i am not getting any errors but while i am running object file by using the command
#./ns.o
i am getting the below error
bash : ./ns.o cannot execute binary file
/* trinoo daemon */
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
[code].....
I wrote a multithread program(c++,gnu gcc). it contains a main program and plugins. some functions in plugins use sleep(). Using these functions in threads cause freezing program. in other word thread sleeps but dosn't wake. How can i use sleep() in my plugin functions without this problem?
View 3 Replies View Relatedfrom the commend line i went to compile the c program by giving the commend "gcc first.c -o first" but the commend line showing gcc is not found. iam using fedora 13 pls tell me what can i do to compile the program. the program i used to compile is below
#include<stdio.h>
main()
{
Since ugprading today to a fresh install of Xubuntu 11.04 I am unable to open .exe's through Thunar my file manager with 'WINE Program Loader'
Wine 1.2.2.
When I try to i receive the error:
Quote:
The file '/media/DUMP/Downloads/anything.exe' is not marked as executable. If this was downloaded or copied from an untrusted source, it may be dangerous to run. For more details, read about the executable bit.
When I check the permissions tab of properties there is no option to make it executable as per screenshot.
Also using chmod +x doesn't change anything but I am able to open .exe using WINE in the terminal but I would rather I did not have to do this every time I use WINE.
I have no intention of using mIRC, it was just a small windows installer I downloaded for testing.
I couldn't connect my Micromax 300G modem in Debian Linux. From internet (in Windows Vista), I came across the information of USB_ModeSwitch and then I downloaded it. While going to install it, I came across the problem that TCL-interpreter is not available in Debian Linux. Then again I restarted my laptop in Windows Vista and connected my Micromax modem and from internet downloaded TCL8.5.10-src.tar.gz. But while going to install it, I came across the problem that " configure: error: no acceptable C compiler found in $PATH " . Also as presently, I am unable to connect my modem therefore I am unable to issue the code:" apt-get update ".
View 16 Replies View RelatedI cannot install Kubuntu (or Unbuntu) 10.4 on my husband's computer. I have spent 5 hours on this and cannot get anywhere. I am deeply frustrated. The iso I burned to CD is good (works on 2 other computers). His computer will not boot from USB, no matter what I do to the drive order in BIOS. After loading the blue screen with the Kubuntu logo on it (and the blue-white dots), the screen changes to black and shows the following text:
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) (initrafs) Unable to find a medium containing a live file system.
He really needs to get rid of WinXP. Kubuntu is what I have on my computer (and love it!). Here is some info about his computer:
OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
[code]....
I'm trying to install The Sims 2 (which I'm aware currently does not run properly in wine anyway), using the multi-CD version. The installation goes normally, up until it comes time to switch from disc 1 to disc 2. The installer prompts me to insert disc 2, but it seems that Ubuntu still believes that the installer doesn't want me to open the drive, because, when I try to open it, it doesn't open, and a window pops up with the following message: Unable to eject CD-RW/DVD RW Drive DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending
View 3 Replies View RelatedI am using Lam mpi. The problem I am facing is that, I am not able to use the "-s" option for lam mpi which is used for loading the program from a particular node and then using the nodes in the cluster to execute the program.
Now I have to copy instance of the executable to every node for the program to run in the cluster. Is there anyway to load the program from a particular node and then use the cluster nodes in its execution without manually copying the executable to each and every node in the cluster
well I want to get the latest version of java on my opensuse. (java is just an example, the rest of programs are similar)Default I had JRE 1.6.0-u17 and I want to have 1.6.0-u20 both JRE and JDK.Choices:1. I added some yast repositories and installed JRE, JDK and java browser plugin2. download from site the .bin file, chmod +x and ./runit!First, I tried the 2nd version but I had some problems:1 - this didn't affected the classpath so when I used java -version still u17 it was, not u202 - the browser plugin wasn't updated3 - how cand I uninstall it (u20)? Latelty I come back to the 1st choice, it works, but I want to learn opensuse so.
View 9 Replies View Relatedwindows bothered me so much so i search the best operating system.first of all how to install any program.how to install it.? there is no one who have knowledge about linux in my area.
View 9 Replies View RelatedI'm trying to install a program on Fedora 12. I am not so good with linux yet. Anyways so as I enter the command in the source directory of this program. The following is generated:
Code: [root@189066 verlihub-0.9.8e-r2]# ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
[Code]....
See `config.log' for more details. how to install the missing stuff? via rpms or download sources and compile?
i'm interesting to install a few programs( one of them is bitron software- Nautilus Image Converter )
View 3 Replies View Related