from the commend line i went to compile the c program by giving the commend "gcc first.c -o first" but the commend line showing gcc is not found. iam using fedora 13 what can i do to compile the program . the program i used to compile is below
#include<stdio.h>
main()
{
printf("hello word
");
}
since last days I am trying to run a simple c / cpp program using eclipse in my newly installed fedora 13, but every time it says either "program file not specified" or "binary error"
View 10 Replies View Relatedfrom the commend line i went to compile the c program by giving the commend "gcc first.c -o first" but the commend line showing gcc is not found. iam using fedora 13 pls tell me what can i do to compile the program. the program i used to compile is below
#include<stdio.h>
main()
{
I am trying to compile a very simple 32-bit program on my 64-bit fedora 12 install, but it won't let me.
I get this error.
I tested it on the school server (64 bit Red Hat Server), and it compiled flawlessly without any warnings. I think I am missing some libraries, but don't know which.
When I compile a C program in Fedora Core 12 using the following format: gcc -o program -static program.c
I get an error:
What do I need to do to make the program compile correctly with the -static flag ?
The whole code is written in C, C++, and Fortran. Is it possible to make it to use more than 4GB memory. Now it is always crashed when it reaches 3GB memory. If it is possible, how to set up the compiling options (or configure flags)? We can use gcc, g++, ...or intel compilers our OS: Fedora 12 x32
[code]....
unable to compile a simple C++ programme (.cpp file), on compiling the file with gcc or g++ the following error is displayed, but the above command works in Redhat EL. the error message is:"fatal error: iostream.h: No such file or directorycompilation terminated."an anybody suggest to compile a C++ programme in Fedora 14.
View 10 Replies View RelatedI couldn't compile gammu-1.28 on my Fedora 13 when running ./configure.To make sure what i'm doing, i was install cmake from fedora repository directly using "yum install cmake" and completed. And then to make sure again, i was update my gcc using "yum update gcc". But there was still errors during running ./configure. Finally, i decided to update all needed inside my fedora using "yum update" to make sure again.
View 7 Replies View Relatedi was trying to install kernel 2.6.29.1 on fedora 14 but it is giving error. First download a package with kernel and i saved in home/user/linux. Afterwards i can extract this package.
1.tar -xvzf linux-2.6.29.1 -C /usr/src
2.cd /usr/src/linux-2.6.29.1/
3.make menuconfig
4.make
5.make modules_install
6.make install
after above steps i got this error.
ERROR: modinfo: could not find module ip6t_REJECT
ERROR: modinfo: could not find module nf_conntrack_ipv6
ERROR: modinfo: could not find module ip6table_filter
ERROR: modinfo: could not find module ip6_tables
ERROR: modinfo: could not find module ipv6
ERROR: modinfo: could not find module fuse
however it gives initramfs,vmlinuz-2.6.29.1 and System.map-2.6.29.1 in /boot folder and menu.lst in /boot/grub is updating according to new kernel. when i reboot my machine and selects the kernel 2.6.29.1 it shows FATAL:kernel too old [1.591633] Kernel panic-not syncing:Attempted to kill init
I'm having problems installing visual python on Fedora 12 (64-bit). Here are the steps I've taken:
- downloaded visual python 5.32
- ran ./configure without problems
- ran make and got this error: Compiling ./core/util/atomic_queue.cpp make[1]: *** [atomic_queue.lo] Error 1
(From src/build.log): libtool: compile: unable to infer tagged configuration libtool: compile: specify a tag with '--tag'
I was using my college's unix server (ubuntu presumably) to compile programs in the laboratory. Now, i have installed Opensuse 11.4 with gnome3. I have installed the Developers pattern, and almost all the packages that looked relevant (which came up when i searched for libgc , gcc, and all). Now, i cant compile a program:
Code:
/*program to test file I/O and getch/putch functionaliny in gcc*/
#include<stdio.h>
int main()
{ FILE *fi;
char ch;
[Code]....
I can't compile a C program form terminal using gcc by Code Blocks 8.02 is able to do so.
Code:
#include<stdio.h>
int main(void)
{
printf("Hello World
[Code]....
im writing from ubuntu i have made a c program and im wondering how can i compile it for being able to run on mac
View 2 Replies View RelatedI followed the steps from the this website [URL]..but after I run: sudo make I got this output:
[Code]...
My Fedora 14 have installed gcc-4.5.1-4.fc14.x86_64,qt-4.7.1-5.fc14.x86_64,
I don't know how to use g++ to compile QT program.
Do I need to set PATH or something else?
Following is the IDL program found on the internet but i dont know how to compile and execute (even dont know can it be done under linux).
Code:
when I try to compile a program that uses SFML with g++, this appears:
Code:
/usr/local/include/SFML/Window/OpenGL.hpp:47:23: fatal error: GL/gl.h: No such file or directory
i am not able to compile my test program which uses gtkmozembed.As i am very new to this, i dont know which are the packages to be installed and how to compile
[Code]...
What are the steps to compile a ns2 program?
View 2 Replies View RelatedI want to cross compile gtk program from linux to arm. I am using ubuntu10.04. How can I cross compile it for arm. I have tried this but this is my output:
root@habesh-laptop:~/habesh/gtk# /root/CodeSourcery/Sourcery_G++_Lite/bin/arm-none-linux-gnueabi-gcc -o trail1 base1.c 'pkg-config --cflags --libs gtk+-2.0'
cc1: warning: include location "/usr/include/gtk-2.0" is unsafe for cross-compilation
cc1: warning: include location "/usr/include/atk-1.0" is unsafe for cross-compilation
cc1: warning: include location "/usr/include/cairo" is unsafe for cross-compilation .....
I have a c program and its related libraries for Linux. But, I need a EXE file to run in windows.
please let me know how to compile the program for windows
However i am unable to find the Run program. It was easy to find on the other Distro's i have tried but i have been unable to locate to in Fedora 12.
View 3 Replies View RelatedI have used a new header file named curses.h in my program.when i try to compile my program it shows me the following error "No such path or directory".What may be the problem?A part of the program is shown below
#include<unistd.h>
#include<stdlib.h>
#include<curses.h>
[code]...
I have a simple testing program like this:
/*The Parallel Hello World Program*/
#include <stdio.h>
#include <mpi.h>
[code]...
My program is, I can't compile this program using gcc, and I can't find something like pgcc in ubuntu. How should I compile this program? After compiling, what should I do to run this program? Can I use something like mpirun to run it? I want to try to use both cores of my computer to run it and make it shows Node 1 also besides Node0.
I had wrote a program in the vi editor using the command vi [filename.cc] in open terminal and now i need to compile n run it
View 3 Replies View RelatedI am using the C++ compiler G++ to compile my programs on Linux Mint 8 - Gnome.
I recently installed QT and when I tried to compile a simple "Hello World!" program it gave me this error:
Quote:
This is the code in HelloWorldQt.cpp:
Code:
I have tried using GTK instead but I get a similar error.
I want to capture the ip packets, so i installed
I am getting the following errors.
I do not even know where to begin, and what logs / errors show: I am completely confused in the variables, etc.I can not install PAL Like all successful, and the program to compile, but I can not verify this.I tried premake and one Engine ODE - then I get an error segmentation, when you start paldemo.If I use cmake, then get this:
Code:
...
[ 46%] Built target libpal
[code]....
I would like to modify my init.gz and add udp-sender to this image. After copying the program compiled on my system to init image I have error when I try run udp-sender: udp-sender not found When I checked ldd I saw that the some libraries are missing. I copied them from my system but still got the same error. how can I compile program for my init.gz?
View 3 Replies View Relatedi just grabed a book and wrote a program and tried to compile it using 'javac' and everytime i'm getting this error:
javac Example.java
/usr/lib64/gcc/x86_64-suse-linux/4.3/../../../../lib64/crt1.o: In function `_start':
/usr/src/packages/BUILD/glibc-2.9/csu/../sysdeps/x86_64/elf/start.S:109: undefined reference to `main'
[Code]....