since last days I am trying to run a simple c / cpp program using eclipse in my newly installed fedora 13, but every time it says either "program file not specified" or "binary error"
View 10 Repliesfrom the commend line i went to compile the c program by giving the commend "gcc first.c -o first" but the commend line showing gcc is not found. iam using fedora 13 what can i do to compile the program . the program i used to compile is below
#include<stdio.h>
main()
{
printf("hello word
");
}
from the commend line i went to compile the c program by giving the commend "gcc first.c -o first" but the commend line showing gcc is not found. iam using fedora 13 pls tell me what can i do to compile the program. the program i used to compile is below
#include<stdio.h>
main()
{
I am trying to compile a very simple 32-bit program on my 64-bit fedora 12 install, but it won't let me.
I get this error.
I tested it on the school server (64 bit Red Hat Server), and it compiled flawlessly without any warnings. I think I am missing some libraries, but don't know which.
I am supposed to deliver my project on monday, however I am unable to lunch eclipse. For the last 6 hours I've been trying to sort out what's going on, but I am helpless Situation looks like this: Eclipse was working fine yesterday. Today I got an error and decided to reinstall. Now I can't start it. I installed it with: yum install eclipse. Here's the log:
[Code]...
I want to use eclipse to compile and debug source code on ns-2 simulator.
1.how can i configure the parameter on eclipse.
2.how can i compile the source code *.cc
When I compile a C program in Fedora Core 12 using the following format: gcc -o program -static program.c
I get an error:
What do I need to do to make the program compile correctly with the -static flag ?
The whole code is written in C, C++, and Fortran. Is it possible to make it to use more than 4GB memory. Now it is always crashed when it reaches 3GB memory. If it is possible, how to set up the compiling options (or configure flags)? We can use gcc, g++, ...or intel compilers our OS: Fedora 12 x32
[code]....
I was trying to install ADT plugin in eclipse in fedora 14 x86_64. But am unable to proceed.
Warning: You are installing software that contains unsigned content. The authenticity or validity of this software cannot be established. Do you want to continue with the installation?
/home/a.harsh/.eclipse/793567567/plugins/com.android.ide.eclipse.adt_0.9.9.v201009221407-60953.jar
/home/a.harsh/.eclipse/793567567/features/com.android.ide.eclipse.adt_0.9.9.v201009221407-60953
/home/a.harsh/.eclipse/793567567/plugins/com.android.ide.eclipse.ddms_0.9.9.v201009221407-60953.jar
/home/a.harsh/.eclipse/793567567/features/com.android.ide.eclipse.ddms_0.9.9.v201009221407-60953
/home/a.harsh/.eclipse/793567567/plugins/org.eclipse.jdt.junit.core_3.6.1.r361_v20100825-0800.jar
When I press ok, I get below error
Problem Occurred
An error occurred while installing the items
session context wasprofile=PlatformProfile,
phase=org.eclipse.equinox.internal.p2.engine.phase
s.Install, operand=null --> [R]javax.servlet.jsp 2.0.0.v200806031607, action=org.eclipse.equinox.internal.p2.touchpoint. eclipse.actions.InstallBundleAction).
The artifact file for osgi.bundle,javax.servlet.jsp,2.0.0.v200806031607 was not found.
Error Log Also attached.
Code:
!Session 2010-11-11 22:43:15.064
eclipse.buildId=M20100909-0800
java.version=1.6.0_20
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=linux, ARCH=x86_64, WS=gtk, NL=en_US
Command-line arguments: -os linux -ws gtk -arch x86_64 .....
An error occured during running a code. I've made run configurations properly and I've chosen GNU Elf parser,Elf parser, Mach-O parser and Cygwin PE parser as a binary parser. Eclipse CDT can not find any error in the code and code runs in terminal properly. Here are the code:
Code:
/*
* pmutex.c
*
* Created on: Mar 7, 2010
*/
#include <stdio.h>
[Code]...
Eclipse denies to run it.I've made an investigation over the eclipse.org, but I can not find any solution.
unable to compile a simple C++ programme (.cpp file), on compiling the file with gcc or g++ the following error is displayed, but the above command works in Redhat EL. the error message is:"fatal error: iostream.h: No such file or directorycompilation terminated."an anybody suggest to compile a C++ programme in Fedora 14.
View 10 Replies View RelatedI couldn't compile gammu-1.28 on my Fedora 13 when running ./configure.To make sure what i'm doing, i was install cmake from fedora repository directly using "yum install cmake" and completed. And then to make sure again, i was update my gcc using "yum update gcc". But there was still errors during running ./configure. Finally, i decided to update all needed inside my fedora using "yum update" to make sure again.
View 7 Replies View Relatedi was trying to install kernel 2.6.29.1 on fedora 14 but it is giving error. First download a package with kernel and i saved in home/user/linux. Afterwards i can extract this package.
1.tar -xvzf linux-2.6.29.1 -C /usr/src
2.cd /usr/src/linux-2.6.29.1/
3.make menuconfig
4.make
5.make modules_install
6.make install
after above steps i got this error.
ERROR: modinfo: could not find module ip6t_REJECT
ERROR: modinfo: could not find module nf_conntrack_ipv6
ERROR: modinfo: could not find module ip6table_filter
ERROR: modinfo: could not find module ip6_tables
ERROR: modinfo: could not find module ipv6
ERROR: modinfo: could not find module fuse
however it gives initramfs,vmlinuz-2.6.29.1 and System.map-2.6.29.1 in /boot folder and menu.lst in /boot/grub is updating according to new kernel. when i reboot my machine and selects the kernel 2.6.29.1 it shows FATAL:kernel too old [1.591633] Kernel panic-not syncing:Attempted to kill init
I am new to Fedora (I have always used ubuntu in the past), and I am trying to download eclipse. Unfortunately, "sudo yum install eclipse" is returning "no package eclipse available". I think this means that I am missing the correct repo, but I'm not sure which is the right one and don't know how to add it to my repo list for this version. My version of fedora is centos5 based, and my current repo list is the following:
[Code]...
I'm having problems installing visual python on Fedora 12 (64-bit). Here are the steps I've taken:
- downloaded visual python 5.32
- ran ./configure without problems
- ran make and got this error: Compiling ./core/util/atomic_queue.cpp make[1]: *** [atomic_queue.lo] Error 1
(From src/build.log): libtool: compile: unable to infer tagged configuration libtool: compile: specify a tag with '--tag'
I was using my college's unix server (ubuntu presumably) to compile programs in the laboratory. Now, i have installed Opensuse 11.4 with gnome3. I have installed the Developers pattern, and almost all the packages that looked relevant (which came up when i searched for libgc , gcc, and all). Now, i cant compile a program:
Code:
/*program to test file I/O and getch/putch functionaliny in gcc*/
#include<stdio.h>
int main()
{ FILE *fi;
char ch;
[Code]....
I can't compile a C program form terminal using gcc by Code Blocks 8.02 is able to do so.
Code:
#include<stdio.h>
int main(void)
{
printf("Hello World
[Code]....
im writing from ubuntu i have made a c program and im wondering how can i compile it for being able to run on mac
View 2 Replies View RelatedI followed the steps from the this website [URL]..but after I run: sudo make I got this output:
[Code]...
My Fedora 14 have installed gcc-4.5.1-4.fc14.x86_64,qt-4.7.1-5.fc14.x86_64,
I don't know how to use g++ to compile QT program.
Do I need to set PATH or something else?
I am using a virtual terminal red-hat and want to install eclipse for c development IDE.
1. I have java 1.6 installed previouse. the java path is configured properly.
2. I downloaded the latest eclipse helios 32bit from eclipse.org
3. I unzip the tar.gz file (eclipse-cpp-helios-linux-gtk.tar.gz)
4. in the eclipse diretory, I try to launch the eclips. but got an error: ./eclipse: /lib/i686/libc.so.6: version 'GLIBC_2.3' not found (required by ./eclipse).
I set LD_LIBRARY_PATH=/lib/i686. and no luck either.
I need to install Eclipse CDT 4.0 (or 5) for centos 5. I have the final version of centos 5.3.
I downloaded the Eclipse CDT version from here CDT 4.0 for Fedora and I tried to install the RPM as root.
# rpm -i eclipse-cdt-4.0.3-1.fc9.i386.rpm. The result for this command is:
warning: eclipse-cdt-4.0.3-1.fc9.i386.rpm: Header V3 DSA signature: NOKEY, key ID 4f2a6fd2
error: Failed dependencies:
eclipse-cvs-client is needed by eclipse-cdt-4.0.3-1.fc9.i386
[Code].....
Following is the IDL program found on the internet but i dont know how to compile and execute (even dont know can it be done under linux).
Code:
when I try to compile a program that uses SFML with g++, this appears:
Code:
/usr/local/include/SFML/Window/OpenGL.hpp:47:23: fatal error: GL/gl.h: No such file or directory
i am not able to compile my test program which uses gtkmozembed.As i am very new to this, i dont know which are the packages to be installed and how to compile
[Code]...
What are the steps to compile a ns2 program?
View 2 Replies View RelatedI want to cross compile gtk program from linux to arm. I am using ubuntu10.04. How can I cross compile it for arm. I have tried this but this is my output:
root@habesh-laptop:~/habesh/gtk# /root/CodeSourcery/Sourcery_G++_Lite/bin/arm-none-linux-gnueabi-gcc -o trail1 base1.c 'pkg-config --cflags --libs gtk+-2.0'
cc1: warning: include location "/usr/include/gtk-2.0" is unsafe for cross-compilation
cc1: warning: include location "/usr/include/atk-1.0" is unsafe for cross-compilation
cc1: warning: include location "/usr/include/cairo" is unsafe for cross-compilation .....
I have a c program and its related libraries for Linux. But, I need a EXE file to run in windows.
please let me know how to compile the program for windows
I downloaded the latest version of Eclipse from the Ubuntu Software Center. However, when I try to install plugins to Eclipse, nothing appears in the update list. More specifically, each plugin is "blank" but when I click on it, a full description is given. But I cannot click "next" or "finish" to install it.
However, running Eclipse as root, the list will appear as it should, and installs plugins. My question is, how can I install new software to Eclipse as user?
However i am unable to find the Run program. It was easy to find on the other Distro's i have tried but i have been unable to locate to in Fedora 12.
View 3 Replies View Related