Debian Configuration :: Couldn't Connect To Linsys WMP600N PCI Card - Ralink Chipset - 28xx 2800 2860

Aug 23, 2010

I have Debian 5.0.3 and I've had a lot of trouble installing Linsys WMP600N PCI card - Ralink chipset - 2860. I had it installed in the board, before I installed/compiled Debian. What I'm thinking I should have done was chosen Desktop and Laptop during the guided install. I tried expert install, but I was over-whelmed with options. Anyways, I tried NDISwrapper in many different ways. My last tries showed that the driver and device was working. No matter what I did, I would never get an interface with a wireless extension. I couldn't find any useful information anywhere, including Ubuntu forums - I'm sure you think I'm stupid or evil.

I eventually figured I would get the drivers directly from Ralink website. [URL] The one that looked like it would work (RT2860PCI/mPCI/CB/PCIe(RT2760/RT2790/RT2860/RT2890) would error out when I would try to extract anything. I used 2nd one (RT2860WebUI) which worked. If anyone does use it, be sure to read all documentation that is included, including the README. After I was done installing/compiling it, I got ra0 interface and could see my router.

I couldn't connect to it because I use WPA2 and that wasn't an option for encryption. I will work on that later. I wanted to share this information with anyone who might need this.

View 1 Replies


ADVERTISEMENT

Ubuntu Networking :: Can't Connect Wireless / Ralink 3070 Chipset?

Aug 18, 2010

this is my first attempt to get into Linux (10.04 Lucid Lynx), and I'm eager to learn. The problem is however that i can't connect to the internet using my USB wifi dongle (Jensen 25150). I've tried what this link says:I've tried to blacklist rt2800usb, rt2x00lib, rt2x00usb and rt2870sta and to load "/etc/modules/rt3070sta", but no luck in that, so I simply do not know what to do next. Perhaps I haven't blacklisted them the right way? I've typed in the commands and saved Gedit and closed it. Is that the right way?

View 2 Replies View Related

Ubuntu Networking :: Unable To Connect To Sitecom Wl-181, Chipset Ralink Rt2800 802.11n Pci

Aug 20, 2010

Unable to connect to wireless network at home. The wireless network is visible. Password is requested. But no connection established.

hardware:
desktop, ubuntu 10.04
PCI card: sitecom wireless nework cardbus card 300N
chipset: ralink RT2800 802.11n PCI
iwconfig wlan0: RT2860 wireless, nickname: rt2860sta

I tried using ndiswrapper. Conclusion: 'driver already installed'.

The wireless network does connect on my laptop with ubuntu 10.04 installed. Distance to modem: 3 feet.

View 2 Replies View Related

Ubuntu Networking :: AW-NE766 (Ralink 2860) Not Detected?

May 13, 2010

I have an EEEPC 1000HE that has an AzureWave AW-NE766 wireless card. As far as I know, the card is based on the Ralink 2860 chipset.

It always worked fine under eeebuntu 3.0, but I just installed Ubuntu NBR 10.4 and now it's not detected at all.

Kernel : 2.6.32-22-generic i686

lspci and lshw show no mention of wireless card at all. Network-manager and wicd both show wired connections, but no mention of wireless at all.

I followed the instructions on the "Solved" post to install the latest Ralink driver from Jan 29. It all went fine, except "ifconfig wlan0 up/down" and "ifconfig ra0 up/down" both return "ERROR while getting interface flags: No such device"

how to tell Ubuntu that I have a wireless card in there?

View 1 Replies View Related

Ubuntu Networking :: Ralink RT2860 Card Will Not Connect To WPA2 In Lucid

May 8, 2010

After installing Lucid, I noticed that my Ralink RT2860 card would not connect to my home network using WPA2 despite the network being visible and of good strength. So I followed the guide at [url] in order to install the newest Ralink drivers.

After installation, same issue. That is, the card will connect to my a/b/g/n network if I leave it unprotected, but it will not connect to the same network if switch it to WPA2. After being given the passphrase, the wireless icon on the indicator applet shows that it is trying to connect, but after awhile it fails. Does anyone know why the built-in driver and also the official Ralink driver are no good for WPA2 in Ubuntu 10.4 for my RT2860 card?

View 9 Replies View Related

Debian Configuration :: Connect To Internet Through Wireless Card?

Jun 9, 2010

I am currently trying to connect to internet through my wireless card, after half day's effort I reached to this point:

/******The following error appears in the dmesg kernel ring buffer output:
ipw2200: ipw2200-bss.fw load failed: Reason -2
ipw2200: Unable to load firmware: -2
ipw2200: failed to register network device
ipw2200: probe of 0000:02:03.0 failed with error -5*********/

I found a solution from Intel website saying that the problem might be: "firmware in wrong location or wrong firmware version". So I proceeded to download the firmware and placed it in /lib/firmware. Also I tried to use menuconfig to enable loading firmware via hot-plug, but I think I have done something wrong when I was configuring the hotplug and firmware.

View 5 Replies View Related

Ubuntu Networking :: Not Working: Zonet ZEW1642D (Ralink Rt3062 Chipset) In Studio

Oct 29, 2010

other forums to get my Zonet ZEW1642D to work on my new install of Ubuntu Studio 10.10. None of the how-tos I've found APPEAR to have worked although I guess I'm not entirely sure how I would know. There is a pair of computers at the top right of my screen by the date/time. When I right click there the following are all checked:

Enable Networking
Enable Wireless
Enable Notifications

but when I click Connection Information Auto eth0 is the only connection that comes up (which must be the wired connection I'm using to submit this) Here are the things I've tried:

1) README_STA included in the driver files downloaded from the Ralink website although I must admit this was a bit over my head
2) http://ubuntuforums.org/showthread.php?t=1045703
3) http://www.hyperborea.org/journal/20...i-ralink-3062/

[Code]....

View 9 Replies View Related

Ubuntu Networking :: Edimax EW-7128g Wireless PCI Not Working With Ralink RT2561/RT61 Chipset

Sep 5, 2010

Just installed Ubuntu Studio 10.04 and everything seems to be working nicely except I have no networking.

The card does not appear in the Network Settings GUI. The only 3 tabs I have are General, DNS, and Hosts.

A screen grab is attached.

I'm a long time Windows user trying out some of the best Linux creative apps I can find. So, Ubuntu Studio was a no brainer. I checked the manufacturer's site for linux drivers and they are available, but I don't know how current. (Edimax site, not RaLink's site.) I opened the file and it looks like it needs to be compiled and installed to work. Something I know almost nothing about. The card is listed as supported in this forum for Ubuntu 9x but I can't find information about it for 10.04

PS. I have no networking on the system but I can transfer files via USB flash drives if needed.

Some System info:

Code:

1 ) Machine Brand and Model (PC/Laptop): Dell Precision 650

2 ) Wireless Brand, Model and Wireless Chipset: 03:0c.0 Network controller: RaLink RT2561/RT61 802.11g PCI

3 ) check interface: robert@ubuntu:~$ ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1

[Code].....

View 1 Replies View Related

Debian Hardware :: Best Wireless Card (Chipset) For Lenny

Jul 13, 2010

I'm running Debian Lenny. I want to get a wireless card working. Spent ages trying to get my betgear WG111T wireless dongle to work with ndiswrapper with no luck so I'm going to fork out for a wireless card. I've googled extensively but haven't really found a satisfactory answer. Is there a wireless card/chipset that I can count on working fairly easily or even better out of the box with Lenny?

View 3 Replies View Related

Debian :: How To Check The Ethernet - Wireless Chipset And Video Card

Nov 5, 2010

Out of curiosity, in linux, how do we check:

- The make/type of ethernet card

- The wireless chipset

- The video card

Used in a computer?

View 3 Replies View Related

Debian Configuration :: OpenCL Install With Nvidia Chipset

Jan 28, 2016

I am trying to install OpenCL on Debian Jessie with a Nvidia chipset. I have installed: nvidia-libopencl1, nvidia-opencl-icd and opencl-headers based on a website instruction. When I run a test program it DOES FIND libOpenCL.so.1 ...... but does NOT FIND libOpenCL nor libOpenCL.so

View 2 Replies View Related

Ubuntu Networking :: 10.04 - Wmp600n Card Not Working Since Update

May 5, 2010

Is anyone having problems since they updated? My card was working fine before I updated. Now it detects all the networks, including mine. However, when it tries to connect it sits there for ~2 minutes, then says it's disconnected. I've checked my security settings and they are fine.

View 2 Replies View Related

Debian Configuration :: Using Azio Wireless PCI Adapter (Network Controller: RaLink Device 0701)

May 3, 2010

using this Azio Wireless PCI Adapter[URL] (Network controller: RaLink Device 0701)

View 11 Replies View Related

Fedora Hardware :: Doesn't Recognize Cisco Wireless Card Wmp600n

Jun 8, 2010

my cisco wireless card model # wmp600n. Fedora doesn't even recognize that its there and i haven't been able to find any linux drivers for it, tried installing the driver using wine but still isnt working for me...

View 2 Replies View Related

Debian Configuration :: #couldn't Start The Xserver?

Mar 26, 2010

im sure that my graphic card is good but after i installed the compiz manager ....the system failed to start the xserver this is the xserver output :

x.org x server 1.7.5
release date : 2010-02-16
x protocol version 11, revision 0

[code]....

View 5 Replies View Related

Debian Configuration :: Network - Cannot Connect To Any Other Websites And Apt Will Not Connect To Any Servers

Feb 18, 2011

I am using Squeeze and all appears OK at first... I have a DHCP lease, PING to router works, apache servering fine in and outside the network, Epiphany seems to connects to default debian.org only, BUT I cannot connect to any other websites and apt will not connect to any servers. I installed once, tried to fix problem, gave up and reinstalled and still have the same problem.

I unistalled Network Manager thinking that was the problem, but still the same issue. Is there a default firewall blocking certain connections or am I missing something I'm supposed to know about? I installed some non-free firmware in the beginning of install and all worked... and I connected fine when downloading packages during install.

View 4 Replies View Related

Debian Configuration :: Apt-get Update GPG Error "signatures Couldn't Be Verified Because The Public Key Is Not Available"

Feb 23, 2011

Why everytime I send apt-get update I got this error on the last lines? Reading package lists... Done W: GPG error: [URL] Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 8F91B0E6C862B42C Here is my /etc/apt/sources.list

[Code]....

View 2 Replies View Related

Fedora Hardware :: Cannot Detect Ralink Wireless Card?

Nov 11, 2010

I recently purchased an MSI A5000 notebook, but regrettably it happens to use an obscure branded wireless card that's given me quite a bit of frustration to get working. I do have a bit of history behind this card that might help to solve this problem. First of all the card is a Ralink rt3090STA, and the manufacturer does provide a linux driver for this card (available here)

I was using Ubuntu 10.04 32 bit until last week, when I decided that I would like to try using a 64 bit system. I would prefer to use fedora instead of Ubuntu for the time being. Ubuntu had some major problems recognizing the card for some time before I was able to get it to work. The process I used to resolve the issue on my Ubuntu system has not proven successful on Fedora 13 x64, and I would like any help I can get to try to resolve this problem.

View 1 Replies View Related

Ubuntu :: Ralink RT2561/RT61 Wireless Card On 9.10?

Apr 26, 2010

About a year ago I had a different computer with this same wireless card (edimax EW-7128g) and it was recognized immediately after I installed ubuntu 8.10. I found this hardware compatibility page, and it says it is compatible, at least on 9.04.

After reading this old guide I found:[URL].. I downloaded the latest driver, and followed the instructions (i had to refer to the readme too, some things were slightly different which I'm assuming is because it's the 2010 driver not the version referred to in that tutorial) up until:

(e) copy the rt61.ko driver file to the modules directory then load it
Code:
$ sudo cp rt61.ko /lib/modules/`uname -r`/kernel/drivers/net/.
$ sudo depmod
$ sudo modprobe rt61

I don't see where rt61.ko is.I've got the information for my wireless connection edited into /etc/Wireless/RT61STA/ rt61sta.dat iwconfig shows pretty much default stuff, no mention of my wireless card or any type of connection, though the card does show up at the bottom of the lspci query. I added the wireless connection information into the "Network Connections" prompt in the preferences, but obviously that's not accomplished much of anything for obvious reasons. Should I just install 9.04? Judging from this account, getting this wireless card to work would be a hell of a lot easier.

View 3 Replies View Related

OpenSUSE Wireless :: Install The Driver For RaLink RT2561T Wi-fi Card?

Dec 28, 2010

I'm very new to openSUSE, so I need easy, clear instructions on how to install the driver for RaLink RT2561T wi-fi card. I have the driver and everything, I just don't have a clue on how to install it!

View 5 Replies View Related

Ubuntu Networking :: Ralink Wireless G Pcmcia Wifi Card

Mar 11, 2010

I just purchased a RALINK WIRELESS G PCMCIA WIFI CARD VISTA/LINUX (UBUNTU)‏.
It is supposed to be UBUNTU plug and play out of the box with no driver downloads needed.

I installed it but could not find a way to search the active Wi-Fi networks available like on my Actiontec card on windows xp. The wireless router/ethernet I have is an Actiontec setup for Qwest-DSL and Actiontec is the name of the wireless network.

Strangely I tried to choose setup a "new network" and entered Actiontec as the network name and it found the network and said it was connected to it. However the internet still is not working?

View 1 Replies View Related

Ubuntu Networking :: Ralink Wireless G Pcmcia Wifi Card?

Mar 11, 2010

Has anyone ever heard of this card or have knowledge of how to configure it to allow me to get on the internet?

View 1 Replies View Related

Ubuntu Networking :: Getting Ralink RT2070 Wireless USB Card To Work?

Mar 31, 2011

I been having trouble getting my rt2070 wireless usb card to work on my desktop. I am using Ubuntu 10.10.

[URL]

Pastebin of dmesg: [URL]

Code:
Representative portion in case pastebin wipes this entry:
[ 234.984025] hub 1-0:1.0: Cannot enable port 8. Maybe the USB cable is bad?
[ 234.984041] hub 1-0:1.0: unable to enumerate USB device on port 8

[Code].....

View 9 Replies View Related

Hardware :: Find The Chipset For A Wireless Card ?

Mar 23, 2011

How do you find one that runs in USB and how do you find it when it runs from a pci port. i already know that you might be able to find the kind of driver that is required to run the device

Lots of people have accomplished this by using aircrack but some operating systems can't install aircrack (not to mention that the use of some software is illegal depending on where you live) so i want an alternative.

View 1 Replies View Related

Ubuntu Networking :: No Connection With Ralink RT2501 Wireless Card / Solve This?

Aug 29, 2010

I use Ubuntu 9.04 and try to get a Sweex LW053 USB wireless card (Ralink RT73/RT2500 chipset) to work. According to the Wiki list in the sticky thread, this one should work "out of the box" since 8.04.

lsusb delivers
Bus 002 Device 002: ID 148f:2573 Ralink Technology Corp. RT2501USB Wireless Adapter
and there is also some wlan0 entry that doesn't look too dodgy when typing ifconfig.
From this I get that my laptop recognizes the card.
I also typed in some numbers such as SSID and DNS server address in Preferences>Network Connections where asked (although the information that I had wasn't 100% what was asked for so I tried to guess what needs to be filled in which fields).
However, I don't get an internet connection (Firefox can't find server...)

What else do I have to (or can I) do?

View 1 Replies View Related

Ubuntu Networking :: RaLink RT2561/RT61 Wireless Card Installation?

Sep 13, 2010

I'm having trouble installing my RaLink RT2561/RT61 wireless card. It seems that this driver causes problems for all ubuntu users, and I've tried a couple of work arounds, none of which work for me.

Firstly I downloaded the most recent driver from here: [URL]...RT2501PCI/mPCI/CB(RT61:RT2561/RT2561S/RT2661) is the driver I downloaded. Next I performed the following steps:
Code:
robinsjp@home-desktop:~$ sudo apt-get install linux-headers-`uname -r` build-essential gcc
Reading package lists... Done
Building dependency tree

[Code]...

View 9 Replies View Related

Ubuntu Networking :: System Freeze On Shutdown - Wireless Card RaLink

Nov 6, 2010

I have strange behaviour on my portable computer Asus UX30. I'm using latest Ubuntu 10.10 release. The main problem, and the most annoying, is a system freeze on shutdown, suspend, hibernate or even restart. For a week I'm trying to find a solution on the web, but no result. From what I noticed, computer freezes when a wireless card is turned off or on. Here are some basic info from wireless card:

Code:
sudo lshw -class Network
*-network
description: Wireless interface
product: RT3091 Wireless 802.11n 1T/2R PCIe
vendor: RaLink

[Code]....

View 4 Replies View Related

Software :: Can't Install Drivers For Ralink 2573 USBrt73usb Ethrnet Card

May 31, 2011

I'm trying to install drivers for my Ralink 2573 USBrt73usb ethrnet card; however when I go to the cite and download them then extract them go to the Module folder and do ~$make I get this Quote:

[Code]...

View 1 Replies View Related

OpenSUSE Wireless :: Can't Connect Ralink 2561 Wlan

Mar 6, 2010

I have installed opensuse 11.2 on a second partition, with the ultimate aim of leaving windows altogether. Unfortunately, I seem to be having terrible trouble (as do many others) getting my wireless internet connection working. I have viewed lots of posts in these forums and done everything I can think of, but since I am a linux novice, am unable to identify the problem. The card is working, since it can identify local SSIDs, it has been set up (to the best of my knowledge) correctly in YAST, but nothing seems to work.
I'll include some information I have recorded from my system.. I typed the commands below with the accompanying output listed:

[Code]....

View 2 Replies View Related

Ubuntu Networking :: Working Wifi Does Not Connect. Ralink 11.04 10.10?

Aug 4, 2011

I have new emachine 1401 and I can't get it to connect to wireless. It does detect networks but when connecting keeps asking for password over and over and never connects. I don't have wired connection at all and the wifi router is not managed by me, so I'm retyping output through my windows xp samsung netbook which works over the same wireless network...

I have tries some other solutions I found around here (install bcmwl-kernel-source, rt3090-dkms_2.4.0.4, blacklist rt2800pci...) so it's not original configuration but behaves exactly the same.

[Code]..

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved