it reminds me a lot of my good old days on the Unix mainframes...... I have a little problem everything works great except for my Philips GearGo MP3, when I plug it in it is not recognized on the system, my camera works, mys USB hard drive and Palm all work ok.
View 1 RepliesI installed fuppes from Index of /repositories/home:/bastianfriedrich/openSUSE_11.3
fuppes is a DLNA server and it is listed in the documentation of my Philips TV. I read the wiki on Main Page - FUPPES and as far as I understood followed the manual. However on the server I see the database filled with files, I see the TV listed amoung the devices, however the TV does not connect to the server.
DBus error org.gtk.Private.RemoteVolumeMonitor.NotFound: The given volume was not found
I get this message when one mp3 players gets fully charged.
Just bought this monitor and it doesnt have widescreen support like my old Dell one but the crystal display in it is leaking across the screen. Maybe its just too new or something. I have little experience in configuring Xorg.conf although I'm pretty adept in other areas of Linux. Running ubuntu 11.04 gnome not unity or gnome-shell. The resolution is 1920x1080 (16:9), 60 Hz. with the default recommended nvidia driver. Maybe ran into the same situation or knows how to configure X.
View 7 Replies View RelatedI need to bring an old philips usb webcam back to life using the PWC and PWCX drivers on a 2.4 kernel.. I found the PWC driver but the PWCX drivers.. can't find them anywhere they used to be available for download on the webcam nemosoft.. but it seems like they are no longer there anyone have this old driver laying around? File name should be something like pwcx-8.4.tar.gz.I googled it but little luck so far..
View 3 Replies View RelatedI have a Philips SNU5600 wifi dongle. My wifi network isn't particularly strong, but it has always been reliable, even when downloading and uploading large files such as ISOs to the internet.
I recently bought a NAS, and when I run rsync or try and copy a large file (eg 6 gigs) to the NAS, the connection will eventually fail.
The error message in /var/log/debug is:
Code:
I have read elsewhere that this is a problem with the Minstrel algorithm, so I have tried disabling that by creating /etc/modprobe.d/80211.conf with the following line in it:
Code:
And when I reboot, I am able to run "cat /sys/module/mac80211/parameters/ieee80211_default_rc_algo" and the output is "pid".
However, in my /var/log/debug, there is still the line:
Code:
Here is the output from a few other commands for extra information:
Code:
Code:
Code:
Code:
- The problem has only been around since I got the NAS, and only happens when copying files TO the NAS. Downloading/uploading to internet doesn't cause the same problem.
- This problem happens on two machines both with the same wifi dongle.
- This problem doesn't happen on a laptop running the Intel iwl3945 driver, nor with machines connected via cables, so it is not the NAS which is at fault.
How to get a stable connection when backing up?
Have got Skype running in 64bit SUSE 11.2 but whenever my Philips SPC 900NC Webcam starts Skype crashes. Do I need a driver for the webcam or is it something else causing the problem.
View 4 Replies View RelatedI recently installed Ubuntu 10.04 and I would use my tv as desktop, in wireless connection with my notebook. The problem is that on the page url I haven't found the software for Linux.
View 3 Replies View RelatedThe Fedora 14 (and 13) pwc Philips Webcam Driver.is only supporting 160x120 resolution (and nothing higher such as 640x480). Also not supporting some other things correctly, I suspect.I say so having tested multiple web camera software and either they don't work (because they have no setting for low res) or they do work if settable to low res., but not for any higher res.I also have a working setpwc tool which shows the driver does not support framerate resetting.I have a Toucam and Toucam Pro - same for both.Also these units worked fine under Fedora 11, and under earlier versions even Red Hat 4.But I usually got the latest pwc from Saillaird.org and compiled it to get full support but there are no more current sources there anymore, and the older ones don't compile.But as I am saying under F11 it was fully correct, now under F13 and 14 it is broken.
View 14 Replies View RelatedI have a Philips webcam I would like to get to work with a proper driver on Ubuntu 10.04. It will work under a generic driver on programs such as Skype, but as soon as I try to use it for web cam sites such as BlogTV, it will say "Webcam required on this site."I have seen similar posts on this and other websites, pointing towards SPCA, but everything I have tried has not worked.When trying SPCA, I tried to do install on the terminal and all that would happen is terminal would respond with: "0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded."Is there an easier method I am missing here, or is there something am I doing wrong?
View 1 Replies View RelatedI am new here and I have tried checking similar threads as well as other sources in the net but could not get my card working. I use Debian squeeze on a P4 2.4MHz machine with 2 GB ram. lspci can detect all 8 chips but could not load the proper module since it could not identify the vendor. I have tried unloading the SAA7134 module and reloading repeatedly all possible cards from 1 to 174 by "modprobe -i SAA7134 card=#,#,#,#,#,#,#,# #-numbers 1 to 174 one a a time.
View 3 Replies View RelatedI got a problem with tv card...i just instal tvtime program for watching analog tv station, but i cant see nothing, this is snapshoot from info about card.
[url]
and from tvtime program
[url]
I'm new to Linux, so I decided to try using Wubi to get started. THe problem is, when it finished installing 10.04, I got this message: OSError: [Errno 13] Permission denied: u'C:\ubuntu\install\ubuntu-10.04-desktop-amd64.iso' Is there any way around this? It might just be that overly restrictive thing called Vista (which I have the bad luck to be using). I was considering getting a USB drive for Ubuntu anyway..
View 1 Replies View RelatedI recently got interested with with OS.. So I downloaded wubi in Ubuntu website. I opted for the Ubuntu Netbook Edition as am using a lappy. However, halfway through finishing download I got an error. The log shows:
OSError: [Errno 13] Permission denied: u'C:\ubuntu\install\ubuntu-10.10-netbook-i386.iso'
What is the difference between the Ubuntu Installer for windows and the Ubuntu CD image? If I use the ubuntu installer for windows, does it have the capability to partition my drive, will it enable to share files with windows etc or is it just a way not to have to burn a CD. Just curious, the exact details of the installation files were not made clear on the website. Note: Windows Version: XP, 32bit, SP3. I have not partitioned anything yet.
View 2 Replies View RelatedI have windows 7 installed on Disk2 (according to windows Disk Manager), and I installed ubuntu 10.10 on Disk0, choosing the dual boot option at installation.
However, grub does not load (presumably because its on disk0 and my machine appears to boot from disk3), so the machine goes straight into windows 7.
How do I get ubuntu to load?
I'm currently running off of my live-cd, and after spending 4 hours of my life trying to fix this myself, i figured someone out here has to know how to help me. Basically, i wanted to try linux, then liked it enough to decide to put on one of my usb-drives (320g adata nobility NH92), and i couldn't get it to boot anything but windows w/o the live-cd, which would then boot the live-cd, lol, in other words, i couldn't get it to boot at all from the external, even though i had changed the setting in my bios to boot from usb first, and tried manually selecting boot from usb and all that fun stuff.
Sooo... eventually i decided it might be a problem with the bootloader, and while i'm not exactly sure at this point what i have done to my computer, all i can successfully boot is the live cd. When I try to boot w/o the live cd, whether i try to boot from my internal (windows) drive, or external, all i get is a device not found error.I think i could fix it if i had windows recovery cd's (i'm running xp, btw), or installation cds, but... unfortunately, they died in a terrible accident. So i have no cd's at all for windows. :/
I have been running Ubuntu 10.04 under Windows 7 (Is this call WUBI?) without any problems for a while. My other machines only run Ubuntu (9.04 & 10.04). I decided to give it a try to the latest Ubuntu 10.10. After going through the successful installation and then rebooting, I am getting the following error message once I select 'Ubuntu' in the boot up menu right after the BIOS screen: Booting ' Ubuntu 10.10, kernel 2.6.35-25-generic'
[Code]...
I'm wondering if this is even possible. I've searched high and low and have yet to find and answer to this particular setup.
The setup:
Router is in another building.
Desktop connected by WiFi
Laptop connected by WiFi
Both the Desktop and the Laptop are in the same building together. About 5' apart.
SSH server is setup on Desktop
FreeNX client is setup on Laptop
So they can connect just fine via WiFi for remote desktop control of the Desktop from the Laptop (so SSH and FreeNX are working).Is it possible to connect the 2 pc's directly to each other by Ethernet cable AND transfer files between them by Ethernet while still being connected to the Internet by WiFi on them both?Or would the WiFi have to be disabled while using the Ethernet connection?Neither has a Gigabit Ethernet NIC so I know it would at least require a crossover cable or another router to connect the 2 by Ethernet cable.The idea behind all this is to be able to transfer files between computers quickly by Ethernet while the computers are still busy doing other things on the Internet by WiFi.
I've been trying to find what would be the lightest ubuntu or ubuntu based distribution, I have an older PC I'd like to get up and running again, and would prefer something that works pretty quickly on it (for basic web browsing and other things) the specs are:
AMD Duron 900Mhz, 384MB RAM, 40GB HDD, Geforce FX 5200 128MB agp.
1. I accidentally wrecked a previous Ubuntu installation so I decided to re-install via the Ubuntu disk. Unfortunately Ubuntu doesn't let me override previous Ubuntu installations...
2. Ubuntu Maverick Meerkat is due to released in about 3 weeks. I want to install it via a clean install.
3. So can anyone tell me how to remove both Ubuntu partitions safely. I am currently running WinVista with Ubuntu Lucid Lynx. I know I have to use something like this to erase GRUB2. Can anyone give me a good tutorial?
I want to change from ubuntu 11.04 to ubuntu studio. Is there any way to do this without losing all my stuff/with out completely reinstalling the os?
View 7 Replies View RelatedThe scenario is as follows - I will be moving across the country and my desktop will stay here powered and online, while I move with a laptop. I need a way to connect to the desktop for file streaming(music and movies) as well as using the virtual machines. I have thought about SSH and VNC.I need something failsafe. That's priority one. I won't be around to fix it if it breaks. I can set the computer to come on in the BIOS at a certain time if the power went out. But if I can get in remotely the whole setup is useless.SSH only provides terminal use, correct? So if I chose that route I would be able to access the computer via command line and play music and movies with mplayer and such, correct? But I would not be able to run the virtual machines? Because there will be no GUI, right?
I have been playing with Vinagre and Vino through the host and guest of a virtual machine and I cannot get it to connect. Is there a better application? x11vnc? I have forwarded port 5900 on the router and have upnp enabled. Got a better remote desktop suggestion?I would like to run this setup headless.(no monitor) I also would like to run it without a gpu if that is possible to make it more energy efficient.Both computers are 64 bits and will be running Ubuntu 10.10 and soon 11.04.Are these crappy ideas to begin with? Should I go another route to get my files and access the virtual machines?
After a reinstall of 10.10, I am able to turn on file sharing and so I set up a shared folder.
Windows Vista can see this folder but in my network place, there is only one icon, and it's a "Windows Network" icon. Upon clicking on that, I can see the local network, "Rompus Room".
When I click on Rompus Room, nothing happens for a while, then I get a message saying, "Opening "ROMPUS ROOM". Then I get the final message, "Unable to mount location", followed by, "Failed to retieve share list from server"
Is windows 7 UAC basically a user/system control system like sudo?
View 7 Replies View RelatedI was running 9.10 in LiveCD mode and was unable to get online. Went to System>Administration>Hardware Drives and found "Broadcom STA wireless driver". Cool. So I went ahead and installed 9.10 (dual boot with Vista), repeated above steps but found no "Broadcom STA wireless driver" option, in fact no proprietary drivers. So I still cannot connect to the Internet, and I don't know where to go from here. (Note: I installed 9.10 side by side with Vista: good? bad?)
[Code]...
So I wanted to replace my password prompt with this:it says to write it over the system files in ubuntu, under usr/share/gnome-screensaverbut i cant do that, as it says permissions are denied...
View 2 Replies View Relatedwhile installing ubuntu i made two partitions and set two load points. //home/but in ubuntu there is only one partition shown(filesystem).. what is going on?
View 5 Replies View Relatedwhen i login to Ubuntu all the icons & toolbars & taskbars are appearing in larger size.
my monitor size is 17" Samsung .
i dont understand how to solve the problem.
when i see on other systems its correctly detecting the monitor size and company.
but on my system its showing unknown for monitor company & the resolution 900 X 600 (16:10).
on my friend system the resolution is 1024 X 768(4:3). but on my system the max resolution is only 900 X 600 (16:10).
I'm about to install Ubuntu on two 250-gigabyte hard drives in a RAID 1 array, but I'm confused about how to partition my hard drives. How much space should I give to each partition? How many partitions should I create and where should I mount them? (I should mention that Ubuntu will be the only OS on this array.)
View 3 Replies View Related